Resurfacing of Bhandariya to Hadmatiya Road (NP BT) Km.0/000 to 4/550 Ta.Jasdan ,Dist.; Rajkot( Pakcage No. RAJ/MMGSY/BUJ/2026-27/P.10)

Name of work :-Resurfacing of Bhandariya to Hadmatiya Road (NP BT) Km.0/000 to 4/550

Ta.Jasdan ,Dist.; Rajkot( Pakcage No. RAJ/MMGSY/BUJ/2026-27/P.10)

BILL OF QUANTITIES

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

1 Clearing and grubbing of road land 1.45 One 28455.09

incl.uprooting rank vegetation, grass, Hect.

bushes, shurbs, saplings and trees girth upto

300mm removal of stumps of trees cut

earlier and disposal of unserviceable

materials © By mechanical means in area of

2 Earthwork for embankment including 1488.00 One 165.42

breaking clods, dressing with all lead and lift Cum

(Excluding watering and consolidation) (A)

Selected soil should be From borrow area

with all lead and lift and should have CBR

not less than 6.00%.

3 Granular Sub-base with Black trap crushed 186.00 One 1040.90

stone well Graded Material (Table.400.1) by Cum

Mix in place Method. Construction of

Granular Sub-base by Providing Black Trap

cruhsed stone well greded material,

spreading in uniform layers with motor

graded on prepared surfce, mixing by mix in

place method with rotavator at OMC, and

compacting with Vibratory roller to achieve

the desired density, complete as per

Technical Specification Clause-401. For

Grading-1 Materials.

4 WBM Grading-2 116.00 One 1423.49

Providing, laying, spreading and compacting Cum

stone agg. Of 63mm to 45mm size to water

bound macadam specification including

spreading in uniform thickness, hand

packing, rolling with smooth wheel roller 80-

100 KN in stage to proper grade and camber,

applying and brooming, stone

screening/binding material to fill-up the

intersties of coarse agg., watering and

compacting to the required density grading-

2 as per Technical Specification Clasue.405

By menual means.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

5 Rolling and Watering of earthwork with 1243.00 One 23.41

vibratory roller including filling in Cum

depression which occur during the process

and as directed.

6 Providing and laying bitumenous grout 1241.00 One 2868.80

37.50mm thick using bulk Emulsion RS1 for MT

tack coat at the rate of 2.50kg/10sqm on

Bitumin surfacer and using BT chips for

required gradation with the asphalt of grade

VG-30 at the rate of 1.99% i.e 19.90kg/MT by

weight of mix including heating and mixing

in drum mix plant , transporting the mix and

spreading the same by paver finisher and

consolidation as per MOST specification

including cost of all materials fuel, labours,

tools and plants etc. using contractor's own

drum mix plant etc. complete.

7 Providing and laying and rolling of 20mm 797.00 One 4913.34

Compacted mix seal surface with B.T. and MT

aggregate as spedified using bitumen Grade

VG-30 for mixing with aggregate at the rate

of 5.10% i.e 51.00Kg/MT of total mix

including heating and mixing in drum mix

plant and spreading the same by paver

finisher and consolidation with vibratory

roller including necessary firewood, oil,

lubricants, labour charges using contractor's

own drum mix plant, machineries and

equipment, tools etc including flushing of

sand 0.30cum/10sqm etc. complete in

accordance with the requirement of

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

8 Providing, laying and rolling of 25mm thick 869.00 One 3946.17

using asphalt viscosity grade of VG-30 open MT

graded premix bituminous carpet with B.T

aggregates as specified and using bulk

Emulsion RS1 for tack coat at the rate of

2.50kg/10sqm on B.T.Surface (As per IRC-

16) and using bitumen for mixing with

aggregate at the rate of 3.36% i.e

33.60kg/MT. of total mix including heating

and mixing in drum mix plant, spreading the

same with paver finisher and consolidation

with vibratory roller including necessary

firewood, oil, lubricants, labour charges etc.

using equipment tools etc. completed in

accordance with the requirement of

9 Excavation for foundation upto 1.5m depth 153.00 One 265.97

including sorting out and stacking of useful Cum

materials and disposing of the excavated

stuff upto all lead. (B) Dense or hard soil.

10 Excavation in large boulders and soft rock by 214.00 One 750.68

wedging including shoring, strutting and Cum

dewatering as necessary and disposing of

the excavated stuff as directed,

11 Providing and casting in situ ordinary 650.60 One 3935.98

cement concrete M-150 mix and providing Cum

necessary pin headers including shuttering,

scafilding, laying vibrating, curing and

finishing complete Without V-Grooves For

12 Providing and filling in foundation with 30.60 One 3359.92

ordinary cement concrete M-100 mix and Cum

providing necessary vertical pin headers

incl. Formwork, vibrating, ramming and

curing complete.

13 Providing and casting in situ Contolled 110.00 One 5247.13

cement concrete- M-200 for average Cum

75/150mm thick wearing coat laid as

directed incuding. tamping, vibrating,

finishing, curring and filling in joints with

bitumen complete.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

14 Providing and laying weep hole in 272.00 One 90.82

Abutment and returns by using A.C pipe of No

100mm. Incl. fixing in proper grade and

jointing the complete as per detailed

15 Providing and laying in Position FE - 3.550 One 73858.69

500/500D TMT bar reinforcement including MT

cutting, bending, hooking and tying

complete as per detailed drawings for the

following (A) Piers (B) Abutments (C)

Returns (D) Walls etc.

16 Providing and fixing Precast cement concrete 18.00 One 356.49

Hectometer as per IRC type design incl. No

painting, lettering etc. fixing in C.C. 1:5:10.

17 Providing and fixing Precast cement concrete 300.00 One 350.80

Guard stone as per I.R.C. type design No

including white washing etc. complete.

Fixing in C.C.1:5:10.

18 Providing and fixing ordinary Kilometer 5.00 One 704.33

stone of pre-cast C.C. 1:2:4 including No

necessary reinforcement as per I.R.C. type

design in C..C. 1:4:8 including painting

lettering etc. complete. (For ODR, VR)

19 Providing and fixing Indicator stone of 205.00 One 102.84

approve stone as per I.R.C. type design in No

C.C. 1:4:8 including white washing etc.

complete Fixing in Earth

20 Village/Bump Ahead sign. : Providing and fixing 6.00 One 5045.36

sign boards made out of 2mm Aluminium sheet size No

90x60 cms. Rectangle as per the design of IRC-67-1977

pre treated with phospheting process and acid etching

coated with one coat of apoxy primer and two coats of

best quality epoxy paint reflectorised with retro

reflective sheeting as per latest MOST specification

letter and numbers should be as per IRC:30-1968,

Mt. long (2 nos) stand post and frame fabricated from

suitable size iron angle of 50x50x5mm, painted with

best quality epoxy coating in black and white bends,

the details of symbole on inscription/ numerals for

each board shall be as per the instruction of the

Engineer in charge. The fixing at site shall be in C.C

1:2:4 block of size 45x45x60cms. for each leg including

excavation curring etc. complete under the

supervision of engineer in charge (A) Engineer Grade.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

21 Informatory Signs :-Providing and fixing sing boards 1.00 One 3856.89

made out of 2mm aluminium sheet; size 80 x 60cms. No

rectangle as per the design of IRC-67-1977 pre treated

with phospheting process & acid teching; coated with

one coat of epoxyprimer and two coats of best

qualityepoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m

long stand postand frame fabricated from suitable

sizeiron angle of 35 x 35 x 3mm75x75x6mm as

required; painted with best qualityepoxy coatings in

black and whitebends. the details of symbol for

eachboard shall details of symbol for eachboard shall

be as per the instruction ofengineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x45 x

60cms. for each leg. including excavation curing tec.

complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

22 Hazard Marker sign : 12.00 One 2423.73

Providing and Fixing sign boards made out of 2mm No

aluminum sheet : size 90*30 cms. rectangle as per

design / Drawing attached (IRC). Pretreated with

phospheting process and acid etching : coated with

one coat of epoxy primer and two coats of best

quality epoxy paint: reflectorised with retro reflective

sheeting as per latest M.O.S.T specification: 3.1 M.

long (2 nos) stand post and frame fabricated from

suitable size iron angle of 35*35*3mm and 50*50*5mm

: painted with best quality epoxy coatings in black and

white bends the details of symbole or inscription /

numerals for each board shall be as per the instruction

of engineer in charge the fixing at site shall be in 1:2:4

CC block of size 45*45*60 cms for each leg: including

excvation curing etc. comp.under the supervision of

engineer-in-charge.(B) Engineering Grade

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

23 Direction sign (Junction board):-Providing and fixing 1.00 One 14831.70

sing boards made out of 2mm aluminium sheet; size No

244 x 122cms. rectangle as as per the design of IRC-67-

1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint; reflectorised with

retro refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame

fabricated from suitable size iron angle of 50 x 50 x

5mm 75x75x6mm as required; painted with best

quality epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60cms. for each leg. including excavation

curing etc. complete under the supervision of engineer

in charge.(A) Engineer Grade(VR)...

24 Sign Board per square Meter :-Providing and fixing 10.00 One 7615.37

sing boards made out of 2mm aluminium sheet; size 1 No

Meter x 1 Meter as as per the design given by

engineer in charge pre treated with phospheting

process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint;

reflectorised with retro refiective sheeting as per latest

M.O.S.T. Specifications; Letters and numerals should

be as per IRC-30-1968, 3.1m long (2 nos) stand post

and frame may be fabricated either from suitable size

iron angle of 35 x 35x 3mm & 50 x 50 x 5mm & 75 x

x 6mm as required painted with best quality epoxy

coatings in black and white bends. the details of

symbol or inscription / numerals for each board shall

be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing etc.

complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

25 Road Marking with Hot Applied paints with 1092.00 One 367.72

reflectorising glass beads on bitumin surface Sqm

providing and laying a hot applied thermoplasting

compund 2.5mm thick including reflectorising glass

beads @250 gm per sq.mtr area, thickness of 2.5mm is

excluding of surface applied glass beads as per IRC:35-

2015 the finished surface to be level, uniform and free

from streaks and holes, zebra

patta/bump/centerline/edge line/ cut patta. the

while color marking should provide liminance

coefficient on cement road shall be min.

mcd/m2/lux and asphalt road shall be min

mcd/m2/lux during the survice life during the date

the marking should meet the performanace criteria for

night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-

2015 warranty for retroreflectivity shall be two years.

26 Cate eye / road stud/ RPM : Supplying 1051.00 One 326.23

Raised Pavement markers of polycarbonate No

and ABS moulded body and reflective panels

with micro prismatic lens (No glass bead

lens) capable of providing total internal

reflection of the light entering the lens face

and shall support a load of 13635 kgs. tested

in accordanace to ASTM D 4280 type H and

complying to specification of category A of

MORTH circular No RW/NH/33023/10-97-

DO III Dt. 11-06-1997. the height, width and

length shall be exeed 20mm, 130mm and

130mm and with minimum reflective area of

13sqcm on each side and the slope to the

base shall be 35+/-5 degree. the body of the

marker should having finger grip for easy

and accurate placement and application with

epoxy /bituminous adhesive as

recommended by the manufacturer of the

marker. the colour of the marker should be

as per the IRC:35-2015 and as directed by

Engineer-in-charge.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

27 Providing and erecting a "W" metal crash 48.00 One 3723.46

barrier comprising of 3mm thick currugated Rmt.

sheet metal beam rail, 70cm above

Road/Ground level, fixed on ISMC series

channel vertical post, 150x75x5mm spaced

2m center to center, 1.8m high, 1.1m below

ground/road level, all steel parts and

fitments to be galavanized by hot dip

process, all fittings to conform to IS:1367 and

IS:1364 metal beam rail to be fixed on the

vertical post with a spacer of channel section

150x75x5mm, 330mm long complete as per

Rupees One Crore Sixty Five Lakh(s) Twenty Three Thousand One Hundred Sixty

And Paise Ninety One Only

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent

( Should be written in figures and words ) of the estimated rate mentioned above. Amount of My

\ Our tender works put as under.

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division