PROVN OF TOILETS AND PIGEON PROOFING NET AND SPECIAL REPAIR TO OLD LOGISTIC BUILDING AT AF STATION VADODARA

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed

Excavation in trenches for not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches for not exc 1.5 mtr wide and exc 1.5 mtr but n exc 3.0 M depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for providing RCC, 1:1.5:3 Mix, Type A1 (Using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for providing RCC, 1:1.5:3 Mix, Type A1 (Using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for providing RCC, 1:1.5:3 Mix, Type A1 (Using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for providing RCC, 1:1.5:3 Mix, Type A1 (Using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for providing RCC, 1:1.5:3 Mix, Type A1 (Using 20 mm graded stone aggregate) as in Chajja complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc fair finished surfaces of concrete flat complete all as specified and directed

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished surfaces of concrete flat complete all as specified and directed

M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions fair finished surfaces of concrete flat complete all as specified and directed

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bars 6 to 8mm dia cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Hardcore with broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for providing 75mm thick Plain cement concrete 1:2:4 Mix, type B-2 (using 40mm graded crushed stone aggregate) as in flooring finished surfaces even and fair without using extra cement complete all as specified and directed

M&L for providing 25mm thick Plain cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in sub base of flooring finished surfaces rough to receive floor finishes complete all as specified and directed

M&L for providing 75 mm thick Plain cement concrete type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L rendering 10 mm thick cement plaster on fair faces of brick surface/concrete surfaces in CM 1:6 complete all as specified and directed.

M & L for 15 mm thick rendering in two layer 10mm thick backing coat in CM 1:6 and finishing coat 5mm in CM 1:4 mixed with and including water proofing compound in finishing coat on fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as specified and directed Note: Water proofing compound shall be measured and paid separately under respective item of BOQ.

M&L for rendering 5mm thick on concrete surfaces of ceiling in CM 1:3 finishing the surface even and smooth without using extra cementcomplete all as specified and directed.

M&L for rendering 10mm thick on concrete surfaces of ceiling in CM 1:3 finishing the surface even and smooth without using extra cementcomplete all as specified and directed.

M&L for preparing newly plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of primer including applying 3 mm thick layer of wall care putty complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying two coats of oil bound distemper over and including a coat of primer including applying 3 mm thick layer of wall care putty complete all as specified and directed.

Removing existing unserviceable water proofing treatment taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises complete all as specified and directed

M&L for providing cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate laid to slope 1:30 in padding for WPT over roof slab,filling of pressed steel door frame complete all as specified and directed

M&L for preparing newly plastered surfaces of wall and applying two coats of cement based paint over and including a coat of primer complete all as specified and directed.

M&L10 mm thick screed bed in CM 1:3 mixed with WPC 3% by weight of cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately under respective item of BOQ.

M&L15 mm thick screed bed in CM 1:4 mixed with WPC 3% by weight of cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately under respective item of BOQ.

M&L for applying cold bituminous primer @ 0.30 ltr/Sqm confirming to IS-3384 and laying APP polymer modified fiber glass reinforced membrane 3mm thick weight not less than 3.5kg/sqm (modified bituminous water proofing membrane ) with plain finish with polyester base reinforcement, sealing all over with lap of 100mm in length side and 150mm on width side of membrane by torching the same and including applying a coat of bituminous aluminium paint @ 100 gms/sqm all as per manufacturer instructions complete all as specified and directed .

Supply only integral water proofing compound (Powder) complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, confirming to IS: 15622:2006 grade B II matt superior finish, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Non - skid Ceramic rectified edge cut tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, confirming to IS: 15622:2006 grade B II matt superior finish, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, confirming to IS: 15622:2006 grade B II matt superior finish, as in vertical surfaces such as dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface such as dado/skirting etc of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:3 as backing coat complete all as specified and directed.

S&F Powder coated aluminium work for frame of door, windows and ventilators and and partition wall etc with one or more rebates fixed in position as per manufacturer's instruction including necessary joining cleat, glazing clips, rubber packing, beading ,plaster work on edges during fixing (if required) etc complete all as specified and directed. Note: Weight of aluminium section shall only be measured for payment.

S&F Anodised aluminium section weighing not less than 0.55 Kg/ RM, Powder coated of any colour (Minimum thickness of powder coating shall not be less than 0.50 micron) as in shutter of doors, windows, ventilators etc with one or more rebates including jointing cleats, glazing clips, rubber packing, Aluminium handles 2 Nos for each door, hinges, powder coated snap beading, screws, anodised aluminium fittings such as peg stay etc complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as specified and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.14mm and fixed with powder coated aluminium beading/ wooden beading complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification drawing complete all as specified and directed

M&L for Plain, solid, straight chowkats and frames of second class Hard Wood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F mild steel small article such as hold fast etc confirming to Fe-290 Grade E-165 complete all as specified and directed.

M&L for treating ends of posts,backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each with tar or coal tar black paint complete all as specified and directed.

M&L for treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each with tar or coal tar black paint complete all as specified and directed.

S&F Factory made flush shutters 35mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in CB shutter complete all as specified and directed

M&L for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed

M&L Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S&F 100mm size butt hinges extruded aluminium alloy with mild steel hinge pin anodised & fixed type B-21 complete all as specified and directed.

S&F 100mm size butt hinges stainless steel medium weight complete all as specified and directed.

S&F 100mm long butt hinges medium weight, cold rolled mild steel and fixed to frame with screws or welding complete all as specified and directed

S&F 100mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F aluminium anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and directed

S&F 200 mm long aluminium handle cast type anodized complete all as specified and directed

S&F 150 mm long aluminium handle cast type anodized complete all as specified and directed

S&F 15 mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 25mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S & F vitreous china wash hand basin, flat back, size 550x400mm with pedestal including waste pipe, waste coupling, PVC connection 450 mm long and brackets complete all as specified and directed

S & F in repair vitreous china wash hand basin, flat back, size 550x400mm with pedestal including waste pipe, waste coupling, PVC connection 450 mm long and brackets complete all as specified and directed

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed

S&F vitreous china wash down water closet pen (pedestal pattern) white (excluding fixing both flushing cistern and flush pipe) including provn of plastic water closet seat with cover (White) closed pattern with flat bottom complete all as specified and directed

S&F itreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and directed.

S&F vitreous china Urinal Partition white of size 310x700 mm complete all as specified and directed.

S&F LDPE pipes, 32 mm bore of pressure rating 6 Kgf/Sqcm with polythene thread union and check nuts, fixed to wall as in waste pipe for wash hand basin and urinal complete all as specified and directed

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completein all respect as specified.

S & F Bib taps, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed

S&F 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and directed

S&F in repairs Angle Stop valves, cast copper alloy, chromium plated, fancy typescrewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for runions and fixed to 15mm bore pipe complete all as specified and directed

S&F Towel Rail 600mm long CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed

S&F PVC connection 15mm size with PTMT nuts of length 45 cm complete all as specified and directed

S&F Rotational moulded polye­thylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F Rotational moulded polye­thylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down existing water tank of any description complete all as specified and directed.

S&F 25mm size Ball brass valves, high pressure, with polythene float and flynut, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F in repair 25mm size Ball brass valves, high pressure, with polythene float and flynut, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F soap dish made out of brass, CP and fixed to wall complete all as specified and directed.

S&F cast iron floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B1, (1:2:4) complete all as specified and directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S & F 75 mm dia PVC (SWR) bends any length any type complete all as specified and directed.

S & F 110 mm dia PVC (SWR) bends any length any type complete all as specified and directed.

M&L for 150 mm dia RCC Hume pipe, class NP-2 ,ISI marked with collar laid and jointed in cement motar (1:1) complete including dismantling the existing drain/sewage pipe complete all as specified and directed.

M&L for concrete bed in cement concrete 1:3:6 type C-2 (Using 40 mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm dia pipe complete all as specified and directed

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) set in cement mortar 1:4 as in cover slab supported on wall complete all as specified and directed

M&L for cement concrete Type C1 1:3:6 (20mm graded aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M&L for cement concrete Type C1 1:3:6 (20mm graded aggregate) as in surface channels and drains complete all as specified and directed.

M&L rendering 15 mm thick cement plaster on fair faces of brick surface/concrete surfaces in CM 1:6 complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching (for 150 mm internal Dia of pipe) as required complete all as specified and directed

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed

Taking down cement plaster of any description on brick or stone wall/ celling including raking out joint , hacking for key and scrubing with water etc complete all as specified and directed

Demolition of brickwork or stone/boulder masonry built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings complete all as specified and directed.

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) of area not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) of area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed

Taking up or down steel tubing and connections 20mm bore complete all as specified and directed

M&L Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

M&L for preparation of old decorated surfaces plastered or unplastered of walls including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, mors and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed.

M&L for preparation of old decorated surfaces plastered or unplastered of ceiling including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, mors and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed.

M&L for preparation of existing surfaces of walls/concrete surfaces thoroughly, rubbing down washing with water to the entire satisfaction of Engineer-in-Charge and applying one coat of cement based paint Camouflage pattern (Colour or shade as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed

M&L for preparation of existing surfaces of ceiling surfaces thoroughly, rubbing down washing with water to the entire satisfaction of Engineer-in-Charge and applying one coat of cement based paint Camouflage pattern (Colour or shade as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed

M&L for complete removal of existing treatment on wall surfaces by scraping down, rubbing down and washing with water to the satisfaction of Engineer-in-Charge and applying two coats of Oil Bound Emulsion distemper over and including applying 3mm thick wall care putty on walls (as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed .

M&L for preparation of old painted surfaces of wood and wooden based material of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed

Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick backing coat in CM 1:4 complete all as specified and directed

M&L for Vitrified Ceramic tiles (light shade) 10 mm thick (square/ rectangular) polished (doubly charged), area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thcik screed bed in CM 1:4 complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished (doubly charged), as in skirting, dado etc with matching to item No 35.00 here-in-before set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 as backing coat, even and fair to receive tiles etc complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm and easing, adjusting and also refixing builders hardware as required and renewal of unserviceable screws and refixing in the same opening incl painting touch up to match with the existing colour complete all as specified and directed.

S&F 35 mm thick, second class hardwood, Plain framed, panelled shutter (two panel), factory made, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F door stopper of 140 mm size (ISI Marked) aluminum alloy body and tongue double legged anodized with hard drawn steel spring with lower portion fixed with hard rubber over all length of cover plate fixed in floor complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.

S&F false ceiling work with galvanised MS ceiling grid system UNLOCK comprising of main runner 34mmx24mmx0.35mmand GI suspender 8 mm dia fixed to ceiling and fixing mineral fibre acoustic ceiling board of size 600mmx600mmx12 mm thick complete all as specified and as per manufacturers instructions including taking down existing ceiling of any description complete all as specified and directed.

S&F (in repair) Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed with aluminium secton complete all as specified

S&F in repairs vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest (excluding flushing cistern and flush pipe) with CI P trap incl connection to trap & flushing pipe complete all as specified and directed

Supplying and laying of CPVC pipes 16mm SDR 11 & plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes 20mm SDR 11 & plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and directed.

Cutting chases, pinning in making good to facing where required of brick walls and pointed in cement mortar 1:3 for concealed water tubing etc cutting exc 10 cm girth but not exc 20 CM girth complete all as specified and directed.

S & F 16mm CPVC brass elbow complete all as specified and directed.

S & F 20mm CPVC brass elbow complete all as specified and directed.

S & F 20mm CPVC brass elbow (3/4 x 1/2) complete all as specified and directed.

S & F 16mm CPVC brass tee complete all as specified and directed.

S & F 20mm CPVC brass tee complete all as specified and directed.

S & F 16mm CPVC male brass threaded adaptor (MTA/MBTA) complete all as specified and directed.

S & F 20mm CPVC male brass threaded adaptor (MTA/MBTA) complete all as specified and directed.

S & F 16mm CPVC female brass threaded adaptor (FTA/FBTA) complete all as specified and directed.

S & F 20mm CPVC female brass threaded adaptor (FTA/FBTA) complete all as specified and directed.

S&F stainless steel bright finish round shape 150mm size fixed grating over floor trap in white or gray cement to match with existing floor complete all as specified and directed.

S&F in repair 25 mm dia curtain drapery rod decorative type cut to length and fixed complete all as specified and directed.

S&F Nylon net of mesh size 25 mm using nylon thread of dia not less than 1.25 mm suitable for 10 Year of life and tied by nylon ropes of dia 4.5 mm at supporting truss in both directions for bird proofing on ceiling and vertical opening of Hangar at the height of 10M to 14M above the finished floor level including all fixing arrangements complete all as specified and directed.

M & L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

M & L for preparation of new surfaces of steel or iron over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified and directed

S&F 4mm dia galvanised steel wire,150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed.

S&F bird spikes made of high grade polycarbonate material, UV stabilized PVC, transparent material, size of each spike 30CM x 15CM X 12.5 CM (Appx) fixed with self tapping screws on cement/ concrete surfaces or steel/ aluminium surfaces upto 4th floor height complete all as specified and directed. Note: Cost of Scaffolding/ ladders as required at site deemed to be included in quoted rates.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and directed.

Material and labour for concealed point wiring with using 2 x 1.5 Sqmm (nominal area) stranded copper conductor single core, PVC insulated (FRLSH) & unsheathed cable, 1100 volts grade as per IS 694 for Phase and Neutral, 1x 1.5 Sq mm (nominal area) stranded copper conductor single core conductor, PVC insulated (In Green colour)& unsheathed cable as in earth wire connected to common earth dolly in concealed rigid PVC conduit size not less then 20mm dia as per site requirement of suitable size all as specified and directed with and including providing new SS sunken box incl all accessories complete all as specified and directed for the following :-

Note : (i) The quoted rates shall be deemed to be inclusive for any cutting chases in brick walls/pillars etc for fixing of suncken boxes and flush it & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with existing surfaces and provision of covering modular sucken box and modular cover plate of any shape . (ii) Fittings like switches sockets regulators, lamp holders light fittings shall be measured and paid for separately under respective items of BOQ. (iii) The size of conduits shall be determined on permissible No of runs of wires as specified in SSR part I (2010) However minimum size of conduits shall be 20 mm dia (medium grade).

One light / fan/ exhaust fan point controlled by one, one way switch.

One 3 pin 5 Amps socket outlet on same board with other switch.

One 3 pin 5 Amps socket outlet on independent board.

Description all as per item No.150.00 here-in-before but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board. Note (i) The quoted rates shall be deemed to be inclusive for any cutting chases in brick walls/pillars etc for fixing of suncken boxes and flush it & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with existing surfaces and provision of covering modular sucken box and modular cover plate of any shape . (ii) Fittings like switches sockets regulators, lamp holders light fittings shall be measured and paid for separately under respective items of BOQ. (iii) The size of conduits shall be determined on permissible No of runs of wires as specified in SSR part I (2010) However minimum size of conduits shall be 20 mm dia (medium grade).

S&F MCB SP Isolator single pole, 5 to 30 Amps, 10 KA, 240 volts complete all as specified and directed

S&F MCB DB SPN double door, 230 volts, 12 way with IP-42 Protection complete with bus bar 200 amps capacity and neutral links complete all as specified and directed

S&F MCB DB SPN double door, 230 volts, 8 way with IP-42 Protection complete with bus bar 200 amps capacity and neutral links complete all as specified and directed

S&F MCB SPN 63 Amps, 10 KA,240 volts complete all as specified and directed

Supplying, laying and testing of cable XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor, laid in trenches/duct or fied to wall/passing through pipe on pole with suitable size cable glands, crimping type cable lugs for stranded aluminium conductor of size 10 Sqmm, 2 Core, complete all as specified and directed. Notes : Earthwork, Sand and Covers shall be measured and paid separately.

Supplying, laying and testing of cable XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor, laid in trenches/duct or fied to wall/passing through pipe on pole with suitable size cable glands, crimping type cable lugs for stranded aluminium conductor of size 25 Sqmm, 2 Core, complete all as specified and directed. Notes : Earthwork, Sand and Covers shall be measured and paid separately.

M&L for sand cushioning with using clean dry and natural river sand including gently punning below/around cable complete all as specified and directed. Note: Depth of the sand shall be measured after punning.

M&L for Bricks; common burnt clay building bricks, sub-class designation of size 230mm x 115mm x 40mmclass for cable protection complete all as specified and directed.

S&F 25 mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete laid in trenches complete all as specified and directed.

M&L for making joints in existing pipe line including T Joint complete all as specified and directed.

M&L Cutting existing steel tubing for alterations or additions (Each cut measured) bore of pipe 80 mm complete all as specified and directed.

M&L for Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) bore of pipe 80 mm complete all as specified and directed.

S&F LDPE pipes, 50 mm bore of pressure rating 6 Kgf/Sqcm with all fittings fixing on wall / laid in trenches complete all as specified and directed

M & L for sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawn through and including PVC Conduit or in existing concealed conduit (as required & directed by Engr-in-Charge) with accessories like bends, tee, etc fixed on wall and ceiling including 4 Sqmm earth wire, FR PVC insulated & unsheathed and connecting to earth dolly including taking down existing wiring complete all as specified and directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm earth wire and one run of PVC conduit shall be measured as one unit. (ii) Necessary plastering to the disturbed surface of wall and distempering /white washing to match the existing colour shall deemed to be included in the quoted rate.

S&F switch piano single pole one way 6 Amp 240 Volts complete all as specified and directed.

S&F switch piano Modular type single pole one way 6 Amp 240 Volts 1 Module complete all as specified and directed.

S&F socket 6 Amps 2 in 1 Socket with Shutter 240 Volt complete all as specified and directed.

S&F socket 6 Amps 2 in 1 Socket with Shutter Modular type 240 Volt 2 Module complete all as specified and directed.

S&F switch piano Modular type single pole one way 16 Amp 240 Volts 1 Module complete all as specified and directed.

S&F socket 6/16 Amps 2 in 1 Socket with Shutter Modular type 240 Volt 2 Module complete all as specified and directed.

S&F ceiling rose PVC polycarbonate isolated body 65x50 mm three terminal complete all as specified and directed.

S&F indoor decorative channel housing fitting slim LED batten 18/20 Watt with Polycarbonate housing and diffuser AC 220-240 Volts, 50Hz and connecting with copper conductor flexible cable from ceiling rose to connector of light, fixed the same with two Nos PVC Square Box complete all as specified and directed.

S&F indoor decorative aesthetically designed Mirror Light provided with high output PMMA diffuser for glare free light including LED lamp (10 Watt) with provision of 2/3 core PVC copper conductor cable from ceiling rose to connector block, fixing the same with two number PVC Square Box complete all as specified and directed.

S&F energy saving LED light fitting 10 Watt Bulk Head luminaire complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size 230 Volts complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and Fixing exhaust fan, steel body heavy duty turboforce, AC single Phase. 230 V of size 300 mm sweep, 1200 RPM air delivery, 4 blades and frame and louvers gray colour, dust resistant. complete all as specified and directed.

S&F LED tube light fitting 20 Watt 230 Volts complete all as specified and directed.

Supply and Fixing LED security light luminaire 35 watt freedom , pressure die cast aluminum housing, heat resistant glass, IP66 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light including provn of bracket made out of 25 mm dia light grade GI pipe 1.0 M long incl fixing arrangements complete all as specified and directed

Supply and fix bracket for security light made up of 25mm dia, 1 mtr long GI pipe , light grade, bentto required length, fixed to wall eith 2 clamps made off 20 x 3 mm mild steel flat minimum 15cm long, 4 Nos 8mm dia bolts with nut including taking down old unserviceable complete all as specified and directed

Material and labour for earthing complete with copper earth plate electrode 600mm X 600mm X 3.15mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to Galvanised Iron earth wire 4 mm dia by means of galvanized bolts, nuts and washers with connected to earth test point & to main switch board /panel etc. all as specified and testing on completion with and including necessary excavation and earth work in any type of soil, earth electrode, earthing lead from electrode to equipment/substation/panel etc, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe, complete all as specified and directed

OM SREE MAHADEV TRADERS

M/s Shivji Rana Chad