PROVN OF RAIN SHELTER, CONCRETE BENCHES RESIDENTS ALONGSIDE THE WALKING TRACKS, NEW ROAD SIGN BOARD FOR BUILDINGS, PROVN OF FALSE CEILINGS IN CORRIDORS, VIDEO CONFERENCE (VC) ROOM OF P1 BUILDING AT TECHNICAL AREA OF DEAL UNDER GE (I) RND DEHRADUN

Amount

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil etc complete all as specified and directed.

Excavating in post holes (or similarholes) each in n.exc 0.5 cum getting out returning filling in layer n.exc 25 cm in hard and dense soil and removal of soil exc. 100m but n.exc 500m and deposting where directed by E-in-Charge complete all as specified and directed.

M&L for Hardcore of broken stone or boulders gauge n exc 63 mm, deposited, spread and levelled n. exc. 15 cm thick, watered and rammed to true surface with Broaken stone or boulder complete all as specified and directed.

M&L for PCC 1:2:4 Type B-1 {using 20mm graded crushed stone aggregate} as in coping/benching bed plates roof kerbs mud stops, including weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and directed.

M&L for cement concrete 1:4:8 Type D-2 using 40 mm graded crushed stone aggregate in foundation filling sub base and mass concrete complete all as specified and directed..

M&L for cement concrete 1:3:6 Type D-2 using 40 mm graded crushed stone aggregate in foundation filling sub base and mass concrete complete all as specified and directed.

M&L for RCC(1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Supplying and fixing precast RCC bench with M-35 grade of concrete made by table vibratory method using FRP mould with strong vibrator compaction. Each cement bench consist of Nos. of L-shape base support in grey cement colour (thickness 100mm, back height - 1000mm, front height - 450mm, base width - 620mm) and 05 Nos. of reinforced concrete planks in soffron colour of size 1500mm x 100mm x 50mm and 01 No. of reinforced concrete plank of size 1500mmx200mmx50mm adn fixing through galvanized steel nut bolts complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curves on plan exc 6 mtr mean radius using old size bricks built in Cement Mortar (1:4), complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curves on plan exc 6 mtr mean radius using old size bricks built in Cement Mortar (1:6), complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar superficial area exc. 400 Sq cm but not exc 0.10 Sqm complete all as specified and directed.

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

S & F M.S Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Framed work as in structural steel like MS column (any type, any size), doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, (Fe-410-W, Gde-250, Quality 'A') complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer, any type of welding/fastening/bolting, bending to proper shape etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

Material & Labour for providing and fixing stainless steel (Grade 304) railing/posts made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F in repair 4mm thick Alca Pannel board with stainless steel plate framing around as in sign/directive boards assembled with stainless steel tube including necessary bolting / fixing arrangement. Sign mark/letters to be fixed with retro reflective radium tape with a height of letter not exc. 15cm and with suitable width as directed with complete fixing arrangement as per manufacter's instructions all as specified and directed. (Note : (a). Alca board will be framed with stainless steel sheet/plates around and fixed by means of bolting/steel welding of vertical steel pole of dia as directed embedded in concrete in ground. (b). Rates includes all fixing/welding arrangement with framing plates and radium tape).

S&F in repair 4mm thick Alca Pannel board (box type) with stainless steel plate framing around as in sign/directive boards assembled with stainless steel tube, back side framing to assemble box type and for fixing lightening arrangements including necessary bolting / fixing arrangement. Sign mark/letters to be fixed with retro reflective radium tape with a height of letter not exc. 30cm and with suitable width as directed with complete fixing arrangement as per manufacter's instructions all as specified and directed. (Note : (a). Alca board will be framed with stainless steel sheet/plates around and fixed by means of bolting/steel welding of vertical steel poles with plates fixed with bolting embeded in concrete of dia as directed embedded in concrete in ground. (b). Rates includes all fixing/welding arrangement with framing plates and radium tape (c) Any type of light in box type sign board with necessary wiring and other requirements will be catered and estimated separately under E/M scope ).

M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa it shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm /sqm of coating (total both surfaces) as in roof covering /cladding to wall, fixed with self tapping screws neeoprene and EPDM washers complete all as specified and directed.

M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa it shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm /sqm of coating (total both surfaces) as in roof covering /cladding to wall, fixed with self tapping screws neeoprene and EPDM washers complete all as specified and directed.

Providing & fixing false ceiling at all heights with perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge.

M&L for 75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4, type B-1, (using 20mm graded aggregate) as in floor fair and even without using extra cement complete all as specified and directed.

M&L for glossy finish rubber moulded chequered cement concrete tile 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment to match over and including 20mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finished complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubing down with water etc, complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed.

M & L preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Writing letters or figures (Block, roman, Italic or Indian) not exc 30 CM high with thick synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles and with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed.

Dismantling of wall and ceiling boards any thickness including cover filletes with and including with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed.

Dismantling posts or struts (wood, steel, or RCC) any section, including taking out embedded portion in concrete, brick work, masonry etc complete all as specified and directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly for one light/Fan point controlled by one Switch complete all as specified and directed.

All as per Srl item No 35 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on same board with other switches complete all as specified and directed.

All as per Srl item No 35 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.

All as per item No 35 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete all as specified and directed. Make of cable and conduit: Havells/ Plaza/ Kalinga. Note for item 35 to 38 here in before : (i) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillars etc. for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at RCC Columns/Beams/Ceilings shall be in surface conduit of suitable size fixed on surface with using PVC rawl plugs . (ii) Rate for modular metal flush boxes ,inner and outer plate with frames are deemed to be included in the quoted rate by contractor for above items. (iii) Fittings like Modular switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iv) The size of conduits shall be determined on permissible No. of runs of wires as specified in SSR Part-I (2009) clause 19.125 (B). However minimum size of conduit shall be 20mm dia (Medium grade

S&F Modular switch piano single pole one way 6 amp complete all as specified and directed.

S&F Modular switch piano single pole one way 16 amp complete all as specified and directed.

S&F Modular socket outlet 2/3 pin combined 2 module 6/16 amp complete all as specified and directed

S&F Modular socket outlet 2/3 pin combined 2 module 6 amp complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed.

S&F in replacement of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole and neutral MCB 20 amp,240Volts power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16/20 amp as required. Make of MCB SP 16/20 Amp IndoAsian orequivalent in Legrand/Seimens/Schneider Make of SPN DB with MCB 20Amp - Indo Asian or equivalent in Legrand/Schneider as approved.

M&L in replacement UNSV of sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 25 mm dia with standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor complete all as specified and directed.

M&L in replacement UNSV of sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 25 mm dia with standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed. Notes for item No. 45 & 46 : (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillars etc. for concealing the conduits to required depth & making good the disturbed surface in cement sand mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling/RCC surfaces shall be in surface conduit of suitable size fixed on ceiling/RCC surfaces with using PVC rawl plugs)

S&F MCB distribution board SPN, 240 volts, 8 ways ,powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 42- IK-09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:- Note: (i) MCB’s /Isolators etc. shall be measured and paid for separately under appropriate item of Sch ‘A’. Note for Item No. 47 (i) Fittings like MCCB/MCB’s /Isolators etc. shall be measured and paid for separately under appropriate item of Sch ‘A’. (ii) -Sheet steel enclosure to be fixed flush to wall by cutting niche & make good to the disturbed wall surface as per existing.

S & F in replacement of unserviceable MCB SPN 240 volts 'C' Curve suitable for fixing in DB of capacity 40 Amps complete all as specified and directed.

S & F in replacement of unserviceable MCB SP 240 volts 'C' Curve suitable for fixing in DB of capacity 6 to 32 Amps complete all as specified and directed.

Supply and fix Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380 m sweep with, blades, and frame and louvers complete all as specified and directed

S&F modular fan step regulator 120 W 2 module complete all as specified and directed.

S&F ceiling rose 3 plates polycarbonate, isolated body complete all as specified and directed.

Taking down carefully LED Light fittings of any type and size from any height on wall/ roof/ ceiling and refixing the same after complete civil work or deposite to MES store yard complete all as specified and directed.

Taking down carefully and Rehanging and refixing ceiling fan and connecting up including provision of PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50Sqmm from ceiling rose or connector block of fan including fan rod of suitable size and minor repairs such as replacement of locking pin, reel insulators, bolts, nuts etc and spraying one coat of synthetic enamel paint of color approved by GE/ Engr in charge complete all as specified and directed.

Disconnecting and Taking down Smoke detectors / Heat Detectors Incl Response Indicator / Electronic Hooter etc carefully from ceiling/ wall/Roof of bldg and Refixing the Same after completing CIvil and electric work and connecting with exising connections & testing complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3345018)

M/S P K ARORA (BID ID -3349736)

A.S. CONSTRUCTION COMPANY (BID ID -3351029)

PANTECH INSTRUMENTS AND SERVICES (BID ID -3359754)