Supply, Erection, Testing, and commissioning of 220kV & 66kV Equipment’s & materials on Turnkey basis including civil works for 220kV Kotda Sanghani AIS Substation

Name of Work :- Construction of C.R. Building, Foundation, Precast Compound wall, Precast Cable Trench, RCC

Road, Parking shed, Metal spreading and misc civil work at 220kV Kotda Sangani S/S, Dist. Rajkot under Gondal

Note for Estimate

1 This sub-station is Proposed at Kotda Sangani Village, Ta.-Kotdasangani, Dist.-Rajkot

2 Land size of Sub-station is 170.00 x 150.00 Mtr + 80.00 x 50.00 Mtr -29500 Sq Mtr.

3 FGL -98.50, Top of foundation & TR plinth - 98.80, Top of plinth of control room building -

As per the Tender purpose R0 layout, CR 9 Span, 2 No. of TR Bay and 4 nos of Line bay in 220 kv and 8 No. of

Line bay in 66 kv is considered.

5 The rate of items taken of SOR 2024-25 of Rajkot District, GETCO SOR and Rate analysis.

6 For water supply borewell is taken of 300 m depth.

7 Estimate is prepared as per standard drawing provided by HO.

8 Dismantle of Existing Barbered Wire fencing is taken.

9 Precast cable trench is considered in yard as per HO instruction.

10 RCC road is considered as per issued drawing.

11 Yard PCC and Metal spreading as per new methodology is considered.

12 Precast Compound Wall is considered with drain and stone pitching work

13 Precast Water drain is considered for storm water drainage.

14 Parking shed, Security cabin, Oil sump and misc. etc. work is considered.

GUJARAT ENERGY TRANSMISSION CORPORATION LTD

TRANSMISSION CIRCLE GONDAL

Name of Work :- Construction of C.R. Building, Foundation, Precast Compound wall, Precast Cable Trench,

RCC Road, Parking shed, Metal spreading and misc civil work at 220kV Kotda Sangani S/S, Dist. Rajkot

under Gondal Circle

SCHEDULE-B:- FOR CIVIL WORKS

SR. DESCRIPTION APROX.

[A] EXCAVATION, FILLING AND EARTH WORK

1 Excavation for foundation up to 1.50 m Depth including sorting out and stacking of

useful materials & Refilling in yard and the sides of the trenches and disposing of the Cmt

excavated stuff up to any lead -Hard Murrum

2 Excavation for foundation up to 1.50 m Depth including sorting out and stacking of

useful materials & Refilling in yard and the sides of the trenches and disposing of the Cmt

excavated stuff up to any lead - Soft Rock

3 Excavation for foundation up to 1.50 m Depth including sorting out and stacking of

useful materials & Refilling in yard and the sides of the trenches and disposing of the Cmt

excavated stuff up to any lead - Hard Rock

4 Excavation for foundation for depth from 1.50 m to 3.0 m Depth including sorting out

and stacking of useful materials & Refilling in yard and the sides of the trenches and Cmt

disposing of the excavated stuff up to any lead -Hard Rock

5 Earthwork for embankment including breaking clods, dressing with all lead and lift

(including watering, rolling and consolidation with 8 to 10 T rollers inlayers of 200mm

thick at O.M.Cto required dry density). Including all Labour charges & approved quality

of Earth/Murrum & Govt. royalty charges etc. if applicable. Approved quality of yellow Cmt

earth/Murrum to be brought from outside. Note : 25 % of the successive bill amount shall

be retained till lapse of one full scale monsoon and rectifications of subsistence if any to

the design ground level)

6 Earth work in cutting in all sorts of soil and soft/hard murrum/soft rock/hard rock

including conveying,breaking boulders in small piece and spreading the

stuff,embankment as and where directed within & any mtrs.from the end of the cuttung

with all required lead and lift,including watering,consolidating spreaded soil anrd rolling of

filled earth work in 200 mm thick layers at OMC to required density consoladation with Cmt

power roller 8 to 10 T.including filling in depressions which occur during the

process,including watering of earthwork etc.as directed by EIC.(Only cutting

measurement will be Paid )including throwing away the extra stuff to out side premises

any lead etc. complete.

7 Supplying, Filling and spreading in plinth/ yard with sand / quarry dust under floors

/ yard including watering, ramming, consolidating and dressing etc. complete. Cmt

[B] CONSTRUCTION

(1) MASONARY WORK

8 Providing & laying White stone bela masonary (including quoin blocks, jamb blocks

closer etc.) with White Stone Bela of approved size in foundation and plinth with Cmt

cement mortar 1:6 as directed by EIC.

Providing & laying White stone bela masonary in course with stone of approved

9 quality in cement mortar 1:6( 1 Cement:6 course sand) including packing the Joints etc. Cmt

Complete for Super Structure G.F+F.F+Stair Cabin

10 Half Brick masonry in common burnt clay building bricks having crushing strength not

less than 35 kg/Sq.m in cement mortar 1:4(1 cement & 4 coarse sand) up to plinth & two Smt

floors G.F+F.F+Stair Cabin. - Conventional Bricks

11 Providing Stone pitching on a slopy embankment with uncoursed rubble of 230mm

size of hard black stone including of cement flush pointing in 1:3 (1- Cement : 3 Sand) Smt

including all required materials labour etc complete as directed by EIC.

(2) CONCRETE WORK

12 Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse sand : 10- stone

aggregates 40 mm nominal size) and curing complete excluding cost of formwork in - Cmt

Foundation and Plinth

13 Providing and laying cement concrete 1:4:8 (1 Cement : 4 Coarse and : 8 black

crushed stone aggregate 40mm nominal size ) and curing complete- Foundation and Cmt

14 Providing & laying control cement concrete M-20 as per mix design exposed work with

curing etc. complete including the cost of ply wood form work & adjustable tubular steel

supports / Props. and excluding the cost of reinforcement.G.F+FF & Staircasse -For Cmt

Footing base of col.,foundation & mass concrete.

15 Providing & laying control cement concrete M-20 as per mix design exposed work with

curing etc. complete including the cost of ply wood form work & adjustable tubular steel

supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircasse -For

Providing & laying control cement concrete M-20 as per mix design exposed work with

curing etc. complete including the cost of ply wood form work & adjustable tubular steel

supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircasse -For

17 Providing & laying control cement concrete M-20 as per mix design exposed work with

curing etc. complete including the cost of ply wood form work & adjustable tubular steel

supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircasse -For Cmt

Lintel, Chajja, Slab, Coping, other cantilever portion

Providing & laying control cement concrete M-20 as per mix design exposed work with

curing etc. complete including the cost of ply wood formwork & adjustable tubular steel

supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircasse for

19 Providing & laying control cement concrete M-25 as per mix design exposed work with

curing etc. complete including the cost of ply wood form work & adjustable tubular steel Cmt

supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircasse -For n for

SR. DESCRIPTION APROX.

20 Providing & laying control cement concrete M-25 as per mix design exposed work with

curing etc. complete including the cost of ply wood form work & adjustable tubular steel

supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircasse -For

21 Providing & laying control cement concrete M-25 as per mix design exposed work with

curing etc. complete including the cost of ply wood form work & adjustable tubular steel

supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircasse -For

22 Providing & laying control cement concrete M-25 as per mix design exposed work with

curing etc. complete including the cost of ply wood form work & adjustable tubular steel

supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircasse -For Sill, Cmt

Lintel, Coping, chajja, slab, Staircase.

23 Providing & laying control cement concrete M-25 as per mix design exposed work with

curing etc. complete including the cost of ply wood form work & adjustable tubular steel

supports / Props. but excluding the cost of reinforcement.G.F+FF & Staircasse -For

24 Providing & Fixing in position as per approved drawing TMT reinforcement bars

confirming to IS 1786- FE 500/500D in RCC work including Cutting,bending, binding

with 16 gauge annealed wire, of bars as per IS requirenment If necessaryand placing in MT

position etc. completed for RCC work. etc completed as directed by EIC..

25 Supplying / Transporting & Fixing in possission of Precast RCC Cable trench of FUJI

make OR its equivalent having in-to-in size of 450 mm wide and 450 mm depth

thickness of wall 50 mm at top, lower portion of 70 mm and bottom portion of 70 mm

thick and top including providing and fixing PSC cover of FUJI make of size 500mm X

550mm X 70mm. RCC cable trench & cover provided as per drawing, manufactured

with self compacted concrete, rate included, jointing with GP2 or it's equivelent grouting

mortar, drilling hole of 100mm dia where as required for cable passing with core cuttuer

with top PSC cover, RCC cable trench, Fixing as per instruction of engineer in charge.

(rate include loading, unloading, placing in position and grouting etc with all require RMT

machinery, tools, tackles, manpower, material etc to complete the job.) The product

should be meeting BIS requirements. Product shall have load carrying capacity -

Tonnes made by using advanced precast technology having High Performance Self

Compacting Concrete of M50 grade and Fe 500 D grade TMT steel reinforcement bar.

The product shall have tie shape groove of 10-20 mm width X 25 mm depth on both

sides of each precast unit product for jointing two precast units. The Precast U Shape

drain should have special in built insert at appropriate location for fixing De-Shackle for

mechanical installation, including supply, transportation at site.

26 Supplying / Transporting & Fixing in possission of Precast RCC Cable trench of FUJI

make OR its equivalent having in-to-in size of 750 mm wide and 750 mm depth

thickness of wall 70 mm at top, lower portion of 90 mm and bottom portion of 90 mm

thick and top including providing and fixing lid cover of FUJI make of size 500 mm X890

mm X 90 mm. RCC cable trench & cover provided as per drawing, manufactured with

self compacted concrete, rate included, jointing with GP2 or it's equivelent grouting

mortar, drilling hole of 100mm dia where as required for cable passing with core cuttuer

with top PSC cover, RCC cable trench, Fixing as per instruction of engineer in charge.

(rate include loading, unloading, placing in position and grouting etc with all require RMT

machinery, tools, tackles, manpower, material etc to complete the job.) The product

should be meeting BIS requirements. Product shall have load carrying capacity -

Tonnes made by using advanced precast technology having High Performance Self

Compacting Concrete of M50 grade and Fe 500 D grade TMT steel reinforcement bar.

The product shall have tie shape groove of 10-20 mm width X 25 mm depth on both

sides of each precast unit product for jointing two precast units. The Precast U Shape

drain should have special in built insert at appropriate location for fixing De-Shackle for

mechanical installation, including supply, transportation at site.

27 Supplying / Transporting & Fixing in possission of Precast RCC Cable trench of FUJI

make OR its equivalent having in-to-in size of 900 mm wide and 900 mm depth

thickness of wall 85 mm at top, lower portion of 110 mm and bottom portion of 110 mm

thick and top including providing and fixing PSC cover of FUJI make of size 500 mm X

1070 mm X 100 mm. RCC cable trench & cover provided as per drawing, manufactured

with self compacted concrete, rate included, jointing with GP2 or it's equivelent grouting

mortar, drilling hole of 100mm dia where as required for cable passing with core cuttuer

with top PSC cover, RCC cable trench, Fixing as per instruction of engineer in charge.

(rate include loading, unloading, placing in position and grouting etc with all require RMT

machinery, tools, tackles, manpower, material etc to complete the job.) The product

should be meeting BIS requirements. Product shall have load carrying capacity -

Tonnes made by using advanced precast technology having High Performance Self

Compacting Concrete of M50 grade and Fe 500 D grade TMT steel reinforcement bar.

The product shall have tie shape groove of 10-20 mm width X 25 mm depth on both

sides of each precast unit product for jointing two precast units. The Precast U Shape

drain should have special in built insert at appropriate location for fixing De-Shackle for

mechanical installation, including supply, transportation at site.

SR. DESCRIPTION APROX.

28 Supplying / Transporting & Fixing in possission of Precast RCC Cable trench of FUJI

make OR its equivalent having in-to-in size of 1800 mm wide and 1800 mm depth

thickness of wall 135 mm at top, and bottom portion of 230mm thick and top including

providing and fixing PSC cover of FUJI make of size 500mm X 2070mm X 130mm.

RCC cable trench & cover provided as per drawing, manufactured with self compacted

concrete, rate included, jointing with GP2 or it's equivelent grouting mortar, drilling hole

of 100mm dia where as required for cable passing with core cuttuer with top PSC cover,

RCC cable trench, Fixing as per instruction of engineer in charge. (rate include loading,

unloading, placing in position and grouting etc with all require machinery, tools, tackles, RMT

manpower, material etc to complete the job.) The product should be meeting BIS

requirements. Product shall have load carrying capacity - 4.8 Tonnes made by using

advanced precast technology having High Performance Self Compacting Concrete of

M50 grade and Fe 500 D grade TMT steel reinforcement bar.

The product shall have tie shape groove of 10-20 mm width X 25 mm depth on both

sides of each precast unit product for jointing two precast units. The Precast U Shape

drain should have special in built insert at appropriate location for fixing De-Shackle for

mechanical installation, including supply, transportation at site.

29 Providing & fixing Precast compound wall L- shaped of FUJI make OR its equivalent

having base width 1.40 m and , width of panel size of 2.0m , Total height of vertical

wall member 3.0 m and thichness of vertical wall member at top 100mm, bottom

180mm and at junction point 180mm, main steel and distribution steel in vertical and

base is per design requirement. The product should be meeting BIS requirements. The

product shall be duly steam cured in the plant to have requisite compressive strength.

The product shall be made by using advanced precast technology using high

performance self-compacting concrete of M50 grade and Fe 500 D grade TMT steel

reinforcement bar. The product shall have tie shape groove of 12-18 mm width and

mm depth on both sides of each precast unit product for jointing two precast units. The RMT

product shall be designed to take 1.8 T wheel loading on top and 25 T uniformly

distributed loading on its side wall. The product should have flange coupling jointing

arrangements, one each at bottom and both the side walls, at appropriate location for

shear connection between two products.

Provision of weep hole or drainage hole (similar to drainage hole of earth retaining wall)

should be made in the product for avoiding buoyancy and releasing the surcharge and

lateral earth pressure in case of intensively heavy rain fall. The product shall have in built

insert at optimized locations for mechanical installation activities including supply and

transportation at site. The precast product shall be manufactured in controlled

30 Supplying / Transporting & Fixing in possission of Precast RCC Drain of FUJI make

OR its equivalent having in-to-in size of 450 mm wide and 450 mm depth thickness of

wall 50 mm at top, lower portion of 70 mm and bottom portion of 70 mm thick. RCC

Drain provided as per drawing, manufactured with self compacted concrete, rate

included, jointing with GP2 or it's equivelent grouting mortar, RCC Drain, Fixing as per

instruction of engineer in charge. (rate include loading, unloading, placing in position and

grouting etc with all require machinery, tools, tackles, manpower, material etc to

complete the job.) The product should be meeting BIS requirements. Product shall have RMT

load carrying capacity - 4.8 Tonnes made by using advanced precast technology having

High Performance Self Compacting Concrete of M50 grade and Fe 500 D grade TMT

steel reinforcement bar.

The product shall have tie shape groove of 10-20 mm width X 25 mm depth on both

sides of each precast unit product for jointing two precast units. The Precast U Shape

drain should have special in built insert at appropriate location for fixing De-Shackle for

mechanical installation, including supply, transportation at site.

(3) PLASTER WORK

31 Providing 15mm thick cement plaster single coat on masonary / bela / concrete wall /

ceiling for plastering up to any floor level finished even and smooth in cement mortar

1:3 (1 Cement : 3 sand) finished with floating coat of neat cement slurry. In ceiling

32 Providing 15mm thick cement plaster on walls in single coat on fare side

masonary/bela/concrete wall/ceiling up to any height and finished even and smooth in Smt

C.M. 1:3 (1 cement : 3 sand) etc. complete.(Sand face /Smooth Finish)

33 Providing 20mm thick sand face cement plaster on wall up to height 10 meters above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand) and Smt

8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) etc. complete.

34 Providing cement vata (10cmx10cm size) quarter round in cement mortar 1:1 including

neat cement finishing watering etc. complete.

35 Providing & fixing 18 gauge wire mesh jali having width 200 to 300 mm with nails before

finishing the surface with plaster. The item includes providing necessary scaffolding SMT

36 Providing & applying Wall painting (three coats) with PLASTIC EMULSION PAINT of

approved brand and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth. Minimum 03 year warranty certificate to be taken from

paint brand. (Note: Before making final payment to agency warranty certificate

from the original manufacture for specific project on the name of agency must be

37 Providing & applying 2 coats of APOCOLITE APEX or its equiv. ACRYLIC EXTERIOR

paint on existing plastered surface or approved make & shade including finishing &

thinning as per manufacturer’s instruction. A gap of 6 hrs. Should be given between

subsequent coats. The work should be carried out strictly as per manufacturer's

specification and requirement comp. as directed by EIC. Minimum 05 year warranty

certificate to be taken from paint brand. (Note: Before making final payment to

agency warranty certificate from the original manufacture for specific project on

the name of agency must be collected.)

SR. DESCRIPTION APROX.

38 Providing & applying 3 coats of ACID/ALKALI resisting paint of approved shade &

make to wall, ceiling including filling putty smoothing the surfaces scaffolding etc. Smt

complete as directed by E.I.C.

39 Providing white washing with lime on wall / ceiling surfaces (Two coats) to give and

even shade including thoroughly brooming the surface to remove all dirt, dust, mortar Smt

drops and other foreign matter.

40 Providing and Applying two coats of Birla or Asian actrylic lappy (putty) and two coats

of primer of approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

41 Providing and laying 24"x24" Vitrified 8 mm thick tiles

SIMPOLO/AGL/SOMANY/VARMORA or its equivalent make For flooring over

20mm(Average) base of Cement Mortar 1:6 (1-Cement : 6 Coarse Sand) on new

surface or fixing on existing flooring by adhesive materials and also for skirting and Smt

dedo on 10mm thick cement plaster in 1:3 including dismentalling of existing flooring and

jointed with colour cement slurry including finished with flush pointing & cleaning the

surface etc complete for light shade

42 Providing and laying color Glazed tiles-SIMPOLO/ AGL/ SOMANY / VARMORA or its

equivalent make 8mm thick in flooring & Dedo laid on bed of 12mm thick cement mortar

1:3 (1 cement : 3 course sand) & fixing the same in cement & providing 12mm thick Smt

back coating of cement plaster in CM 1:3 for base, filling the joints with white/color

cement neatly finishing the joints curing etc. complete.

43 Providing and laying approved quality polished Kotah stone slab(25mm th. and

600mm x 600mm in size) flooring including using 35x25mm approved quality machine

cut, marble strip over 20mm (average) thick base of cement mortar 1:6 (1 cement :

course sand or L.M. 1:1.5 laid over and jointed with grey cement slurry including rubbing

and mirror polishing using polishing machine with grinding six emery's of different no.

including using special chemical powder for polishing including white cement coating Smt

two times during polishing for filling up minute holes or cracks in joints etc. complete.

The item rate includes the removing the existing flooring including base concrete,

throwing the stuff as & where directed upto any lead. Etc. complete as directed by E.I.C.

The waste material will be property of contractor.

44 Providing and laying polished Kota stone slab 25 mm th. in risers of steps, Dedo and

sills laid on 10 mm thick CM 1:3 & jointed with grey cement slurry including rubbing and Smt

polishing etc. complete.

45 Providing and laying gang saw cut 18mm thick black granite stone, mirror polished pre

moulded and pre polished machine cut granite stone of required size and shape, shade

and colour in sill soffit, jambs, tred riser, flooring, platform etc over 20mm base of

cement mortar 1:6 (1-cement:6 coarse sand) laid or fixing with areldite, or fixing in wall Smt

with cutting and jointed with grey cement slurry mixed with pigment, epoxy touchups to

match the shade of slab including rubbing polishing etc complete-18mm thick for sills,

46 Providing and laying 75mm thick IPS flooring in cement concrete 1:2:4 ( 1 cement :

coarse sand : 4 graded stone aggregate 20 mm. Nominal size) including finishing the

floor with smooth cement slurry, making diagonal lines, curing etc complete as directed

47 Labour charges for making molding edge to marble / Kotah including all tools tackles,

materials and labour etc. complete as directed.

48 Providing and Applying spacer of 4mm and not less than 4mm depth of epoxy grooving

grouting of lavicrete , Roff or its equivalent as directed by Engineer in charge including

cost of fixing materials, labour, tools, plants, equiptnent including all lead & lift comp.

(6) DOORS AND WINDOWS

49 Providing and fixing fully glazed / partly glazed double leaf 20 micron thick colour

anodized aluminium door with following listed extruded section manufactured by Jindal

luminium Ltd. & other accessories,the Alluminium sections are of HE9WP Group: (1)

with door outer frame section of 63.5 x 38.1 x 3.18 mm thick weighing 1.777 kg/Rmt

(J4605) (2) Door shutter vertical style (meeting style) of 53.7 x 44.45 x 2.30mm

thickness (J4537) weighing 1.238 Kg/m (3) Hinge side 53.7 x 44.45 x 2.30mm thickness

(J4540) weighing 1.173 Kg/Rmt (4) Bottom rail of size 150 x 44.45 x 2.40mmthickness

(J4538) weighing 2.376 Kg/Rmt (5) Lock rail of size 83.5 x 44.45 x 2.40mm thickness

(J4549) weighing 1.679 Kg/Rmt (6) Top rail of size 47.62 x 44.45 x 3.18mm thickness

(J4506) weighing 1.501 Kg/Rmt (7) Ventilator middle member (if required) 49.91 x

x 3.00mm thickness (J4621) weighing 1.495 Kg/ Rmt (8) Aluminium handle 127.00 x 37 Smt

x 3.65mm thickness (J4483) weighing 1.912 Kg/No. (9) Tower bolt 250mm long (J4954)

(10) Aluminium bending mortice lock (J4420) (11) Top panel using 6.0mm thick Triveni

or Modi or Saint Gobain make float glass fixed with PVC Clear gasket (12) Bottom panel

using 4mm thick exterior aluminium sheet board of make approved by the Engineer - in -

Charge (for partly glazed door) fixed with virgin PVC clear gasket (13) Hydraulic floor

mounted spring godrej or equivalent of make approved by the Engineer - in – Charge.

with all other required fixtures and fastening of colour anodized with aluminium beading,

with all labours and materials etc. complete as directed by EIC. Aluminium section user

for fixing hinges, door closer, etc. shall be filled with country teak wood to receive

50 Providing and fixing window having extruded aluminium 20micron thick colour

anodized section frame main outer size 63.50x38.10x1.95mm (of Jindal Section

no:4605, @ wt 1.094Kg/Rmt), horizontal two track member size 61.85mm x 31.75mm x

1.20mm(of Jindal Section mo: 8687 @ wt of 0.695 Kg/mt), vertical member of size

61.85mm x 31.75mm x1.30mm(of Jindal section no: 8758 @ wt of 0.659 Kg /mt) with Smt

Sliding Shutters of horizontal member Size 40mm x 18mm x 1.29mm(of Jindal section

no: 8949 @ wt of 0.456Kf/mt), vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Sectio: 8947 @ wt 0.457 Kg/mt, section 8948 @ 0.457kG/mt) with 5 mm thick

transparent bronze colour/white tinted float glass with aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc complete for Window.

SR. DESCRIPTION APROX.

51 Providing and fixing approved quality 20micron thick color anodised aluminum

ventilator having frame size 63x38.10 mm having thickness 1.20mm & weighing

kg/rmt approx standard aluminum extruded anodized frame having panel of 5mm thick Smt

white/brown glass fixed horizontal louvers in aluminum channel as per details drawings.

52 Providing and Fixing 20 micron colour Anodised standard extruded of alluminium section

of size 63.50mm x 38.10mm x 1.95mm (jindal section: 4605 @ wt 1.094 Kg/Rmt) with

colour anodized alluminium frame with 5mm thick transparent bronze colour tinted

glass as details etc complete for Fix window.

53 uPVC Casement Door: Providing and fixing factory made uPVC Casement white colour

door Single / Double Panel of VEKA or its equivalent make comprising of lead free uPVC

multi chambered frame, sash and mullion / coupler (wherever required) exturded profile

having minimum wall thickness of 2.10mm for R3 and R4 profiles confirming to

EN:12608 in any shape and size as per CPWD specification, uPVC exturded glazing

beds, interlocks and inline sash adaptor (wherever required) of appropriate dimension,

EPDM gasket, hardware, SS304 grade fastners of minimum 8mm dia with counter

sunkhead, comprising of matching poluamide PA6 grade sleeve for fixing frame to

finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary

necessary stainless steel screws etc. Profile of frame, sash and mullion shall be mitred

cut and fusion welded / mechanically jointed duly sealed at cornders, including drilling of

holes for fixing hardware and drainage of water etc. After fixing the frame the gap Smt

between frame and adjucent finished wall shall be filled with weather proof silicon

sealent over backer rod of approved size and quality all complete confirming to CPWD

specification and direction of Engineer in charge. Section of steel rainforcement and

cross section of uPVC profile to be approved by Executive Engineer.

Single / Double panel casement door with French (False) Mullion with Zink alloy (zamak)

3D Hinges, multipoint locking system, Zink alloy (Zamak) powder coated handles on both

sides. Using R4 series with frame (64mm and above) X (55mm and above) & Sash

(64mm and above) X (100mm and above) & French (False) Mullion (64mm and above) x

(60mm and above) and Float glass pane of nominal thickness 5mm (weight not less than

(7) FABRICATION ITEMS

54 Providing and fixing approved quality Rolling shutters of approved make and made

with gear operated type with crane handle as per IS 6248 -1979 having 18 gauge sheet

thickness and 80mm wide M.S. Laths interlocked together through their entire length

and jointed together at the ends by end locks mounted on specially designed pipe shaft

with bracket plates guide channels and arrangements for inside locking with push pull Smt

operation complete including the cost of hood cover with one coat of red oxide primer

followed by 3 coats of oil painting of approved shade & tint etc complete as directed by

E.I.C (The measurment shall be paid for wall opening plus drum only) (A) Shutter having

width below 3.5 meter.

55 Providing & fixing MS Grill / Steel work welded of approved quality & design as per

drawing & as directed with necessary grill door (if required) including welding or bolted

fixtures and fastening. etc. with 3 coats of oil painting of approved shade & tint with one Kg

coat of yellow Zinc primer including grouted hold fastetc. complete as directed by EIC.

(3 coats Oil painting shall be done after confirmation of application of yellow zinc primer

56 on MS fabrication

Providing & fixing from

cover for cable trench in control room made from 14 Gauge

M.S. Sheet having M.S. Angle frame alround of 40 X 40 X 5mm. size and cover shutter

frame of angle 30 x 30 x 5 mm size & 2 supports at middle including oil painting of 3 Smt

coats of approved shade & make. Providing 2 handles of 6mm. dia. M.S. bar as per

instruction etc., complete as directed by E.I.C.

57 Providing supplying fabricating and erecting chain link fencing panel of size

2400x2000mm made from 75x75mm & 10 gauge GI chain link & 50x50x6mm angle

including fixing and chain link in angle frame by means of 40x3 mm GI flat welded to

angle frame. Drilling of holes in angle frame and flat, fixing the same with angle post (50

X 50 X6 mm) in line, level and plumb by means of 10 mm dia bolts and nuts in frame Kg

and flat with hot deep galvanizing as per IS-2633/72 & 209 of 1966 or latest amendment,

etc complete as per drawing as directed by EIC. (All this materials like G.I. flat, chain link

fencing, GI angles, bolts, nuts will have to be supplied by the contractor).

58 Supplying & Fixing 600 mm dia hot dip galvanising cross spiral type razor edge

concertina coil having 80 circles, 200 clips with optimum openable strentch of 8m

length using a central core wire high corbon spring steel (High tensile wire) made up of

2.6mm dia as per IS:4454, Part-1, grade-1-II having minimum galvanising of 230-250

gsm per mm2 aroung which a edge of razor sharp barbs strip of 5mm thick & 19mm

width confirming to IS:513DD quality having minimum galvanizing coating of 12 microns

with series of barbs punched along the length at regular interval support / tied with Four RMT

(04) rows of barbered runner wires to newly proposed GI angle brackets at top and one

runner wire at the bottom with U nails & clips etc complete as per manufacturers

specification and directed by EIC with providing and fixing GI angle 50x50x6 mm PLUS

'+' shaped placed at approx. 3.00 m apart including painting etc complete as per

manufactures specification and as per direction of engineer-in-charge.

59 Providing and fabricating and placing approved quality steel work welded including Hot

dip galvanizing as per IS-2633/72 & 209 of 1966 or latest amendment, etc complete in

built up sections, framed work including cutting, hoisting, fixing in position :-(A) In beams

and joints channels angles, tees, flats with connecting cleats as in main and cross

beams, hip and jack rafters, purloins connected to common rafters etc.

60 Supply, fabrication,cutting,threading of M.S rod including hot dip galvanizing the same

of required size and length including 2 Nos of hex nuts with check nut, lock nut, plain

washer,spring washer, base plate 65X10 thick stopper pit welded at end. etc; complete

as directed by E.I.C

SR. DESCRIPTION APROX.

61 Setting of TR Rail for transformer plinth in line, level and gauge before concreting of

foundation and making necessary holes in rail poles if required & fixing the foundation

bolts and fixing template in such a way as it remains in position during concrete as

directed by EIC.

62 Setting of template & foundation bolts in line and level before concreting of foundation

and making arrangement of fixing template in such a way as it remains in position during

concrete etc. comp. As directed by EIC. Note: The rate includes supplying and setting No

63 Providing & fixing M.S. ladder 450mm wide or 50x6mm M.S. flat and 16mm dia M.S.

Bars welded as step at 300mm C/C and fixing the ladder & 3 coats of oil painting etc. Rmt

complete as directed by E.I.C.

64 Providing & Fixing SIGN BOARD having size 1000 X 750 mm. for SUB-STATION made

from 16 gauge M.S. Sheet having frame work of 35X35X3 mm. M.S. angle all-round &

vertical intermediate angle supports at equal distance welded to sheet with 3 Nos. of No

50X50X6 mm. M.S. angle posts 3.0 M. long with arrangement of bolting, 3 coats of oil

painting etc., complete as directed by E.I.C

65 Providing and fixing approved quality sliding gate of 40mm dia mild steel pipe B class

all round and 20mm dia Mild steel pipe at 200mm C/C and 12mm mild steel square bars

at 200mm C/C alternatively (I.e. One between two pipes) vertically welded to 40mm dia

pipe frame as per drawing and design with necessary brackets, hold fasts, locking

arrangement on top & aldrop on both the side including base rail for sliding the gate Smt

having ball bearing, rollers & guide tracks of 50x6mm M.S. flat with hold fast, fabrication

of side supports including fixing GETCO letter on front side etc. comp. with three coats

of approved oil painting & one coat of red oxide primer as directed by EIC. (The cost

does not include the cost of reinforcement)

66 Providing & fixing pre-cast coloured Rubber Dye inter locking concrete block 60 mm

thick with grade of concrete M 300 pnumatic compressed by mechanically pressed and

as per approved design including 75 mm sand layer for leveling and filling the joint with Smt

sand in proper line and level etc complete.

67 Providing & placing 50mm thick & 300mm wide Prestressed Concrete Cover (for clear

span of up to 1.2 meter in proportion (1:1:5:3) or M-20 necessary reinforcement or 4mm

dia HT steel wire-4 Nos. bars and 4mm dia. distribution bars at 150 mm C/C as per

drawing & design including providing necessary M.S. bar hooks for lifting arrangement &

vibrating with vibrators. Finishing all the surfaces, curing by placing in water pond for ten

days etc. complete as directed by E.I.C. The rate includes cost of all material required,

labour charges, transportation, loading, unloading etc.

68 Providing and laying 50-75mm thick Grouting with Non Shrink Grouting material of

CONBEXTRA-GP2, POLYGROUT-NS or equivalent, having the minimum compressive

strength of 45 N/Sqmm mixing as per manufacturer's specification including necessary Smt

shuttering, tool tackles labour etc completed as directed by Engineer In Charge.

69 Providing & laying water proofing treatment on terrace including applying neat cement

slurry 2.75 kg./sq.mt. on cement admixed with water proofing component after cleaning

the surface, Laying cement concrete with brick bat 75mm to 100mm thick with

percent of C.M. 1:5 admixed with water proofing component over 20mm thick layer of

C.M. 1:5 to required slope including ramming at junction of wall and slab, after two days

of proper curing applying a second coat of cement slurry, finished the surface with

20mm thick C.M. 1:4 china mosaic flooring and finally finishing the surface with trowel

with white cement slurry after finishing the whole terrace shall be flooded 75mm deep

with water for a period of two weeks.300 mm vata on wall shall be done. The Smt

measurements shall be given only for clear area of terrace excluding the area of vatta.

The contractor shall submit performance guarantee of the waterproofing item at the rate

of 20percent of cost of item of work order for a period of 5 years from actual date of

completion of work on stamp paper of appropriate value in approved format of GETCO.

The 20 percent of cost of executed item of work order will be deducted in RA bills or

agency has to submit DD in Final bill to be kept for a period of 5 years from actual date

of completion from his bill and shall be withheld as a performance gaurantee for five

70 Providing & applying anti termite treatment, as per IS 6313 (Part.II & II 2001) for

building works in pre construction & post const. stages, using chemicals conforming to

relevant IS in water emulsion and effective when applied uniformly over the area to be

treated. The chemical to be used is chlorophriphos 20 Percent EC or its equivalent.

The treatment is to be carried out as per the procedure mentioned below and treated

plinth surface area is to be taken for measurement. (with performance guarantee for

years)a)For pre construction treatment: For plinth filling and periphery holes in side plinth

to be drilled 300MM C/C each having depth 1.5M and for inside plinth the hole are to be

treated with diluted chemical solution, 1.5 lit. per hole, in the ratio of 1:20. For periphery Smt

i.e. out side plinth the ditch is to be treated with diluted solution 2.25 litre per rmt. In the

ratio 1:20. The entire surface area is to be treated with diluted solution of dose 2.5 litres

per smt. over and above as a plinth surface treatment. The contractor shall submit

performance guarantee of the anti termite item at the rate of 20Percent of cost of item of

work order for a period of 5 years from actual date of completion of work on stamp paper

of appropriate value in approved format of GETCO. The 20Percent of cost of executed

item of work order will be deducted in RA bills or agency has to submit DD in Final bill to

be kept for a period of 5 years from actual date of completion from his bill and shall be

71 Providing & fixing approved quality 300x300mm size marble year plate with black

border all round & letters including fixing the same in cement mortar etc. comp. As No

directed by EIC.

SR. DESCRIPTION APROX.

72 Providing plantation & development of plants /trees/flowers,ornamental plants, & garden

shrubs,small trees of plants of selected & approval name quality,size & growth in good

condition.The work includes cost of plants,material,digging pit in the soil of size

0.6x0.6x0.6 mtr soil for planting trees. mixing manure & refiiling pit with good earth No

,watering as & where required. Providing pesticides/fertilizer for

maintenance,replacement & replacing of dead plant during

maintanence.cleaning,removing,labour,tools & tackles transportation,loading & un

loading etc.complete as directed by E.I.C.

73 Providing and fixing sign board made out of 2mm aluminium/ ACP sheet of required

size as per design given by EIC , pre trated with phospheting process and acid etching,

coated with one coat of epoxy primer and two coats of best qualift epoxy paint,

reflectorised with retro reflective sheeting as per lates M.O.S.T specifications. Latters

and numerals should be as per IRC 30-1968, 3.1m long stand post and frame may be

erected from 50 x 50 x 5mm or 75 x 75 x 6 mm as required and painted with best quality

epoxy coatings. The details of symbols or inscription / numerals for board shall be as per

instruction of EIC. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 cm for

each leg including excavation concreting curing etc complete under supervision of EIC.

74 Transportation of Girder/Rail/SS Structure/Tower/Conductor/

Insulator/Cables/Hardware/GI Strips/Earthwire/Staywire/Furniture/Transformer Oil. Etc.

from GETCO's nearest Store centre/SS to another destination including loading and

75 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having

Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength

The Light weight calcium silicate ceiling tiles shall have , light reflection 85Percent non-

combustible as per B.S. 476 part IV, 100Percent humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best thermal Insulation The Light weight

calcium Silicate tile shall be of approved texture Fine issured/Spintone/Cosmos having

NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X

595 mm to be laid on true horizontal level suspended inter locking metal grid of hot

dipped galvanized steel sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced at joints to get required length

and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between

main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross Smt

’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting

walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm

made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to

centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium

silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid

including, cutting /making opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling

using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and

50mm long dash fasteners, 4mm G.I.

adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at

76 Providing & fixing 75mm dia. PVC Cowl vent of light type.

77 Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with

hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete Smt

as directed by Engineer in charge.

[C] WATER SUPPLY AND DRAINAGE & MISC.

(1) WATER PIPE LINE

78 Providing, laying and jointing in true line and level 15 mm diameter UPVC pipe (SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer in charge. Pipe shall be fixed on the wall with the

help of clamp at every two meter c/c or shall be concelled as directed including Rmt

necessary fittings, fastening, fixtures, excavation and back filling. The rates includes

testing of pipe and jointing and fixing the same with adhesive solvent, including cost of

79 Providing, laying and jointing in true line and level 25 mm diameter UPVC pipe (SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer in charge. Pipe shall be fixed on the wall with the

help of clamp at every two meter c/c or shall be concelled as directed including Rmt

necessary fittings, fastening, fixtures, excavation and back filling. The rates includes

testing of pipe and jointing and fixing the same with adhesive solvent, including cost of

80 Providing, laying and jointing in true line and level 32 mm diameter UPVC pipe (SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer in charge. Pipe shall be fixed on the wall with the

help of clamp at every two meter c/c or shall be concelled as directed including Rmt

necessary fittings, fastening, fixtures, excavation and back filling. The rates includes

testing of pipe and jointing and fixing the same with adhesive solvent, including cost of

81 Providing, laying and jointing in true line and level 40 mm diameter UPVC pipe (SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer in charge. Pipe shall be fixed on the wall with the

help of clamp at every two meter c/c or shall be concelled as directed including Rmt

necessary fittings, fastening, fixtures, excavation and back filling. The rates includes

testing of pipe and jointing and fixing the same with adhesive solvent, including cost of

SR. DESCRIPTION APROX.

82 Providing, laying and jointing in true line and level 50 mm diameter UPVC pipe (SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer in charge. Pipe shall be fixed on the wall with the

help of clamp at every two meter c/c or shall be concelled as directed including Rmt

necessary fittings, fastening, fixtures, excavation and back filling. The rates includes

testing of pipe and jointing and fixing the same with adhesive solvent, including cost of

83 Providing & fixing approved quality gun metal check or non-return fullway wheel valve

84 Providing and fixing approved quality PVC SWR Nahani trap IS 14735 for drain

mm diameter with jaliwith self cleaning design with CI scread down or hinged grating

including the cost of cutting with additional aluminum perforated jali cover & Pipe NO

outside the wall with plug, bend, and making good the walls etc. complete as directed by

85 Providing and fixing approved quality S.W. gully trap with C.I. Grating, brick masonry

chamber and water tight C.I. cover with frame of 300 mm x 300 mm size (inside) with NO

standard weight. (B) 150 mm x 100mm size P or R type.

86 Providing & fixing approved quality Fiber Reinforced Polymer(FRP) 2.5 Tons or More

Capacity Manhole Covers (24 Inch x 24 Inch x 1.2 inch) in Size with water tight Frame

& fixing the same in concrete or Mortar etc. complete as directed by E.I.C.

87 Providing & fixing approved quality Fiber Reinforced Polymer(FRP) 2.5 Tons or More

Capacity Manhole Covers (18 Inch x 24 Inch x 1.2 inch) in Size with water tight Frame

& fixing the same in concrete or Mortar etc. complete as directed by E.I.C.

88 Providing and fixing approved quality screw down bib tapes of jaquar code no OPP-

15037PM or its equivalent brand having basic price of tap ₹2050 or more following size: No

(A) Brass screw down bib tap polished bright 15mm dia.

89 Providing & Fixing approved quality a set of 6 Nos. of stainless steel coat racks of

approved quality fixed on 20 mm. thick teak wood batten including 3 coats of oil painting No

etc., complete as directed by E.I.C

90 Providing and fixing approved quality C.P. Brass towel rod complete with C.P. Brass

brackets fixed to wooden plugs with C.P. Brass screws. 600mmx20mm size

91 Providing and fixing approved quality 600mm x 450mm beveled edge mirror of

superior glass mounted on PVC moulded frame and fixed to wooden plugs with C.P. No

brass screws and washers.

92 Providing & Fixing 450X400mm size Stainless Steel approved brand Kitchen Sink Incl

waste pipe & Coupling etc; complete as directed by EIC.

(3) DRAINAGE AND RAIN WATER

93 Providing & fixing FINOLEX brand or equivalent approved quality rigid P.V.C. pipe

4kg/sqcm for rain water including necessary fittings like bends, shoe, cowl etc. & fixing

the pipes to the wall in plumb by means of G.I. Clamps of 18 gauge sheet at 1 to 1.5 Rmt

meter distance, filling the joints with approved solution complete as directed by E.I.C. -

94 Providing & fixing FINOLEX brand or equivalent approved quality rigid P.V.C. pipe

4kg/sqcm for rain water including necessary fittings like bends, shoe, cowl etc. & fixing

the pipes to the wall in plumb by means of G.I. Clamps of 18 gauge sheet at 1 to 1.5 Rmt

meter distance, filling the joints with approved solution complete as directed by E.I.C. -

95 Providing and laying (true level or slopes) and jointing reinforced concrete light duty,

nonpressure pipes I.S. class NP/2 of the150 mm internal diameter with collars and butt Rmt

ends prepared for collar joints including testing of units complete.

96 Providing & laying rigid 6 kg/cm2 PVC drainage pipe 75mm dia. including necessary

fittings like bend, tee,Y bend plug etc. fixed with wall by means of clamps & nails with Rmt

water tight joints by approved solution etc. complete as directed by EIC.

97 Providing & laying rigid 6 kg/cm2 PVC drainage pipe 110 mm dia. including necessary

fittings like bend, tee,Y bend plug etc. fixed with wall by means of clamps & nails with Rmt

water tight joints by approved solution etc. complete as directed by EIC.

98 Providing & laying rigid 10 kg/cm2 PVC drainage pipe 160 mm dia. including necessary

fittings like bend, tee,Y bend plug etc. fixed with wall by means of clamps & nails with Rmt

water tight joints by approved solution etc. complete as directed by EIC

99 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars

for culverts including necessary excavation & refilling the trenches, joining, the pipes

with C.M. (1:1) & filling 150mm thick concrete (1:4:8) below joints, curing etc. completed Rmt

as directed by E.I.C I.S. Class NP3 of internal diameter 300 mm.

100 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars

for culverts including necessary excavation & refilling the trenches, joining, the pipes

with C.M. (1:1) & filling 150mm thick concrete (1:4:8) below joints, curing etc. completed

as directed by E.I.C I.S. Class NP3 of internal diameter 600 mm

(3) BORE AND WATER SUPPLY

101 Providing & fixing approved quality readymade 4 Layered (Thermal isulated) overhead

P.V.C. water tight storage tank of 1000 liters capacity of make Supreme / Vectus /

Ashirvad or its equivalent made from food grade plastic and water tank is certified with

RoHS (Restriction of Hazardous Substances) and linear low density polythene & low

density polythene LDPF product confirming to I.S.: 10146-1982 with cover including

providing & fixing one 20mm dia, float valve ball-cock, one 20mm dia PVC over flow pipe

of length up to 0.30 Mt. including making all connection for inlet/outlet etc. complete as

directed by E.I.C.

102 Drilling of bore well of 165mm dia by machine in all kind of soil, sand, clay Murrum,

soft rock and hard rock etc. complete truly vertical with equipments and labors etc. Rmt

complete as directed by E.I.C.

103 Providing, fixing & lowering heavy duty 10kg/cm2 PVC casing pipe suitable for 165mm

dia.mm. bore well including necessary coupling connector solution etc. complete as Rmt

SUCH-B. directed by EIC. Page

SR. DESCRIPTION APROX.

104 Providing, fixing approved quality of HDPE pipe of ISI quality with all accessories

fittings, jointing etc. suitable for submersible pump lowering in bore etc. complete as

directed by EIC. - (A) 63mm dia.(outer)10kg/cm2

105 Providing & joining approved quality flat Copper cables sufficient for 7.5 HP pump set

etc complete a 10mm flat cable. Rmt

106 Supplying and lowering the approved ISI Submersible pump of 7.5HPX8 stage in bore

well etc. comp. as directed including ISI approved MEI type oil immersed auto

transformer starter commissioning and testing to required delivery head (all other

accessories will be paid separately.)

107 Providing & fixing approved quality single phase Monoblock / self priming pump of ISI

brand (2H.P)with all GI fitting for inlet & outlet connection including providing G.M.Wheel No

valve required electric fitting / switch board etc. comp.

108 Providing and fixing approved quality control panel board metal box I.S.I. with a main

fuse connection ampere meter, volt meter 30 Amp. 1 phase switch single phase

preventor cum water level guard and male and female type socket 1 phase indicator No

lamps and toggle switch etc. including all wiring/earthling completed as directed by E.I.C.

109 Providing & fixing approved quality top cap for 150mm dia. Pipe clamps, socket & other

accessories required for completing the job as directed by EIC

110 Providing and fixing wash basin with single hole pillar tap with tap with brackets painted

while/colour including cutting holes and making good the hole including pillar

tap,chromium plated bottle trap,stop cock, fisher union, Brass waste pipe etc complet.

Half Pedestal Washbasin of Jaquar CNS-WHT-801 with fixing accessories BP ₹4200

Pillar Cock Jaquar FLR-5015 with lift type knob and Base flange base prise ₹1975.00 No

Waste Coupling 32mm size full threded Jaquar make ALD-705L130 BP ₹625.00

Bottle Trap Jaquar make ALD-769L300x190 Wall connection pipe and Flange BP ₹1950

Braided hose 450mm long with one M10X1 Nipple and 15mm Nuts , O ring and Rubber

or products of Kohler /Kerovit / reputed make having base price more than above

111 Providing and fixing urinal with spreader hole and fixing accessories of size 355 X

X 535mm of jaquar - URS-WHT-13261H of Base prise ₹4100 including connection with NO

trap and with integral longitudinal flush pipe concealed outlet

112 Urinal Valve

Providing andwith Auto

fixing Closingwall

WC Built-in Control

with cistern withCock & Wall

seat cover, hinges, accessories set WALL HUNG Water Closet of size 390mm X

650mm X 745mm including jointing with soil waste pipe and with inlet connection for

flush pipe with W.C. pan and flush cock of approved quality of 25mm dia etc. complete.

Wall Hung WC of Jaquar make FLS-WHT-5353 PPZ & Cistern FLS-WHT-5203C of BP

Regular Body of Concealed Stop Cock Suitable for 15 mm Pipe Line with Protection Cap

Jaquar make ALD - 083 B.P. ₹1175

Exposed part kit of Jaquar make Opp-15083KPM concealed stop cock with fitting

sleeve, operating lever, adjustable wall flange with seal having BP ₹675.00 NO

Regular Body of Concealed Stop Cock Suitable for 25 mm Pipe Line with Protection Cap

Jaquar make ALD - 081 B.P. ₹1850

Exposed part kit of Jaquar make Opp-15083KPM concealed stop cock with fitting

sleeve, operating lever, adjustable wall flange with seal having BP ₹675.00

or products of Kohler /Kerovit / reputed make having base price more than above

mentioned Base price (BP) including fitting & fixing in position with required

accessories, including transportation, tools tackles, fitting work and fitxures for the same

113 Providing B.B. Masonry inspection chamber for underground CI inspection chamber

and bends with bricks heavy crushing strencth not less than 35 kg/cm2 in CM (1:5), CI

cover with frame (light duty) 455mm x 610 mm internal dimensions, total weight of cover

with frame to be not less than 38 kgs (weight of cover 23 kg and weight of frame 15 kg).

RCC top slab with 1:2:4 mix (1cement: 2Coarse sand : 4 graded stone aggregate 20 mm NO

size). Foundation cocnrete 1:5:10, inside plaster 15 mm thick with cement mortar 1:3

finished smooth with floating coat of neat cement on walls and bed concrete etc.

complete. Inside dimensions 455mm x 610 mm and 1000 mm deep.

114 Providing 2500mm internal diameters & 4.00 Mt deep soak pit including excavation in

all types of soil & soft rock & C.C. (1:4:8) bedding 300mm thick below masonry and

450mm thick brick masonry in C.M. (1:6) up to 600mm height 350mm thick for further

600mm & 230mm thick for remaining height honey combed, plastering in C.M.(1:3)

outside up to 1.5mt height and 100mm thick RCC slab with 600x600mm CI having cover

with frame, with necessary reinforcement as per design & CI vent pipe 1800mm long

with brick masonry pillar 350x350x450 plastered all around filling 40 to 50mm brick bats

up to 1.5Mt depth including 16mm dia MS"U" stages steps refilling including disposal of

the surplus excavated earth up to the lead of 300Mt radius including 3 coats of white or

colour wash to all exposed finished surface etc. completed as directed.

[D] YARD LELLING & METAL SPREADING & ROAD WORK

115 Providing, Laying, Spreading, and Compacting graded stone aggeregates to wet mix

macadam as per MORT & H Specification including premixing the material with Water

at OMC in mechanical mix Plant, Carriage of mixed material by Tippers to site, Laying in

uniform layers with paver or motor garded in subbase/ sub base course on well prepared

surface and compacting with vibratory Roller to achieve the desired density Complete as

per MORT & H Clause-406-WMM.

116 Supplying & stacking & spreading 25 to 40mm size crushed metal including

transportation, filing the box etc. complete as directed by EIC. (Box measurement will be Cmt

paid with 15 percent voids deductions)- For yard metal spreading.

117 Providing & Filling & spreading in foundation and plinth with murrum or selected soil in

layers of 20cm. Thickness including watering, ramming and consolidating etc. complete. Cmt

SR. DESCRIPTION APROX.

118 Providing and laying Granular sub-base in two layers by providing coarse graded

material Grading- I using B.T.M.C. (Black Trap Machine Crushed) metal 53 mm to

mm at 35percent , crushed stone aggregate 26.5 mm to 4.75 mm at 45 percent and

below 2.36 mm at 20 percent , having C.B.R. not less than 30 percent , as per table 402 Cmt

of MORTH gradation including leveling the material at site of work, mixing and spreading

into grade and camber, watering and consolidation at OMC with roller including cost of

material, labour etc complete. GSB

119 Providing and Laying Controlled cement concrete M20 for trimix RCC road to require

line, level, slope including of

(1) Providing 125 micron polythene sheet at base of concrete,

(2) Mixing approved quality polyester fibre (12mm) @125 gm per bag or as per

manufacturer's specification during concreting

(3) Shuttering form work of M.S. C Channel sections of required length & height as per

drawing including connection, bracing pins or stake to require line, level, slope etc.

(4) Concreting compaction with using needle Vibrator, Double beam screed vibrator

dewatering/Vacuum pump and finishing the surface with Power Trowel Cum Floater

including any low or high spots shall be made up by adding or removing concrete and

refinished to required line level and slope.

(5) Providing light brooming on the surface and edging carefully finished with an edger of

(6) Providing construction joint using Concrete Groove Cutter machine of size 10 mm Cmt

wide & 25 mm deep in transverse direction @ 4.5 M C/C and sealing with approved

quality grade B bitumen sealant

(7) Providing Contraction (Dummy) joint using Concrete Groove Cutter machine of size

5 mm wide & 25 mm deep in Longitudinal direction and sealing with approved quality

grade B bitumen sealant

(8) Providing expansion joints of size 25 mm width and upto through depth of concrete

using 25 mm thick Dura Board HD-100 of approved quality and sealing 25x20 MM top

with approved quality bitumen sealant at 40 Meter C/C with 63 MM Dia P.V.C pipe cap

filled with compressible material for dowel bar. ( For 6m wide road longitudinally at the

centre expansion joint to be provided)

The Item rate is including with all necessary equipments, machinery, tools, tackles,

Labours & Pond / Jute bag Curing etc. complete as per Drawing and as directed by

E.I.C. (Minimum cement content for Concrete is 370 Kg/Cmt & Excluding the cost of

120 Providing and laying Cement slurry of mix 1:6 (1- Cement : 6 Sand) provided over

the cement concrete layer for metal work with cement content not less than 150 Kg/

Smt including of all materials, labour, spreading etc completed as directed by EIC.

121 Supplying and spreadingRound up (Glyphosphate 41percent SL) of approved IS

standard make or equivalent weedicide for weed control in proportion of 100ml

weedicide and 250gram ammonium sulphate mixing with sticking agent mixed with 10Ltr

of clean water and spraying and second spray with same mix as stated above after two

months and as per manufacturers specification and as directed by Engineer In Charge.

[E] OIL TANK PIPE LINE & SUPPORTING ACCESSORIES

122 Providing and laying ISI mark G.I.pipe line with couplings of HEAVY DUTY class and

100 mm in DIA including all taxes, insurance, transportation and lying/fitting excavation

of required gradient, and also GI flange with nuts and supporting accessories etc Rmt

complete including giving testing to EIC. (Rate inclusive of Material rate & Labour Rate.

payment shall be done on running meter of pipeline)

123 Supplying & fixing of ISI mark CI D/F Sluice Valves, Butterfly Valves & Reflux Valves of

100 mm Diameter including all taxes, etc. complete. PN-1 with hand wheel /cap No

operated. (PD type short body) Reference

124 Cleaning & removing of unwanted trees,plants,babuls, shrubs, debris, grass, garbage

etc. from the premises of sub-station & approach raod including disposing of the same

out side substation premisis etc complete as directed by Engineer in Charge. The item

rate includes all necessary tools, tackles, machineries & manpower etc. complete as

125 directed by EICthe barbered wire fencing, pinned with R.C.C./P.S.C./Angle or wooden

posts from all rows & diagonals & building & stacking the barberd wires as directed by

EIC etc. complete. ( PAYMENTS WILL BE MADE IN RMT. OF COMPLETE FENCING

WORK IRRESPECTIVE OF NO OF ROWS.)

126 Removing the existing fencing post P.S.C or sngle iron from concrete without damaging

the post & stacking etc. complete including dressing the ground etc. complete as

directed by E.I.C.