WIDENING OF ROAD AT CERTAIN PLACES IN AHMEDABAD CANTT UNDER GE (ARMY) AHMEDABAD CANTT

Amount

Excavating over areas, not exceeding 1.5 meter deep and getting out soft and loose soil complete all as specified and as directed.

Removing excavated material to a distance exceeding 50 meter and not exceeding 250 meter depositing where directed at a level not exceeding 1.5 meter above the starting point compelte all as specified and as directed.

Rolling and consolidation of formation surfaces in cutting/ filling including watering with 8 to 12 tonne power road roller complete all as specified and as directed.

Material and labour for soling (or sub grade) 200 mm thick (spread thickness) with broken boulders or quarried stone 63 mm nominal size, interstices filled, surface formed and rolled and consolidated with 8 to 12 tonne power road roller to required gradient and camber complete all as specified and as directed.

Material and labour for 150 mm thick (consolidated thickness) wet mix macadam (WMM) in two layers of each of 75 mm each with granite, trap or basalt coarse aggregate of grading 2 (63 to 40 mm size) for first layer and of grading 3 (50 to 20 mm size) for second layer spread, rolled and consolidated with 8 to 12 tonne power road roller to required gradient and camber as required complete all as specified and as directed.

Material and labour for preparing surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning clear surface with gunny bags and applying evenly priming/ tack coat with bituminous primer at the rate of 10 kg per 10 sqm complete all as specified and as directed.

Material and labour for bituminous premix semi dense asphaltic concrete, 30 mm consolidated thickness with 5.5% (paving bitumen VG-30 Grade) binder content by weight of total mix, rolled and compacted to required camber and gradient complete using hot mix plant and mechanical paver and 8 to 10 tonne power road roller complete all as specified and as directed.

Material and labour for bituminous premix semi dense asphaltic concrete, 40 mm consolidated thickness with 5.50% binder content by weight of total mix, rolled and compacted to required camber and gradient complete using hot mix plant and mechanical paver and 8 to 10 tonne power road roller using paving bitumen (VG-30 Grade) complete all as specified and as directed.

Material and labour for preparation of new or previously untreated surfaces of road and painting lines, dashes, arrows, letters on road pavements and the like not exceeding 10 cm wide with hot applied thermoplastic road marking paint 2.5 mm thick (white or golden or yellow) of approved colour conforming to BS 3262-1989 with 20% glass beads (intermixed) spread and laid with special applicator machine complete all as per manufacturer's instruction and all as specified and as directed.

Material and labour for moorum/ red bajri in road side berms of thickness 100 mm rolled to required camber and gradient using 8 to 10 tonne power road roller all including surface dressing in loose or soft soil removing grass vegitation/ scrum complete all as specified and as directed.

Material and labour for precast cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) in appex stone/ kerb stone with plain fair faces including chamfers, weathering throting and set in cement mortar 1:4 complete with joints to math size and shpe as approved by Engineer-in-charge complete all as specified and as directed.

Material and labour for preparing blace top surfaces by brushing with wire brushes for removing cacked mud, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a priming/ tack coat with paving bituminous primer at the rate of 5 Kg per 10 Sqm of grade 80/100 (VG-10) complete all as specified and as directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector of model Number DA 972.0 fixed with and including mild steel stud of suitable size as per manufacturer's instructions and complete all as specified and as directed.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125 mm x 125 mm x 25 mm (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2 V/ 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions and all as specified and as directed.

SNEH TRADERS

DMA PROJECTS