PETTY ROUTINE REPAIR / MAINTENANCE FOR ATTENDING DAY TO DAY ONLINE COMPLAINTS OF ADMINISTRATIVE BLDG COMPLEX OF C AND D AREA AT NAVAL DOCKYARD VISAKHAPATNAM

Amount

Demoliton brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc., and removing the debries to a distance 5km away from the Dockyard premises complete all as specified and directed.

M&L brick with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in CM (1:6) for exceeding half brick walls complete all as specified and directed.

S&F in repairs floor door stopper 140 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 450 mm size (flat back or angle back type) in repairs including cutting for and pinning ends of brackets or erecting stand in repairs complete all as specified and directed.

S&F in repairs Viterous China wash down water closet pan (pedestal pattern ) including PVC seat cover complete all as specified and directed.

S&F in repairs vitreous us china squatting pan `ORISSA` pattern size 580 x 440 mm with integral foot rests (exceeding flushing cistern and flush pipe including provision of concrete bedding all as specified and directed.

S&F vitreous china half stall urinal with grating, union and spreader complete set with 40 mm dia GI light grade waste pipe incl. brackets etc., complete all as specified and directed.

S&F in repairs of Vitreous China urinal back size 465 x 355 x 265 mm white (minimum ) with grating and union for discharge pipe (execludig flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repairs urinal spreader of chromium plated push type with PVC pipe of 15mm bore as required complete all as specified.

S & F Vitrous China urinal partition white of size 310 x 700mm all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed.

M&L for coloured non skid ceramic tiles 300 x 300 x 7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl cement screed 15mm thick in 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles (200 x 300 x 7-8mm) thick as in skirting/dado/vertical surfaces, including 10 mm thick 1:4 CM etc., set and jointed in neat cement slurry provided in colured cement to match the coloured tiles all as specified and directed

S & F in repair PVC low level flushing cistern 10 ltrs capacity including all fittings and brackets bends flush pipe etc., and fixed in repairs all as specified and directed.

S & F in repair PVC connection (high density) 15 mm dia 600 mm with PTMT nuts both ends with rubber washer all as specified and directed.

S & F in repair PVC connection (high density) 15 mm dia 450 mm with PTMT nuts both ends with rubber washer all as specified and directed.

S& F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints any size including fixing to steel pipe or union all as specified and directed.

S&F plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel C.P or Aluminium hinging device all as specified and directed.

Taking down GI tubing 15mm dia with all connection all as specified and directed.

All as per item No. 20.00 above but 20mm dia

All as epr item No. 20.00 above, but 25mm dia.

All as epr item No. 20.00 above, but 50mm dia.

S & F 50 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and directed.

S &F in repairs Fancy type chromium plated 15 mm bore Bib Tap, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.

S &F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.

S & F in repairs Fancy type chromium plated 15 mm bore angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms 20mm-125gms) ® all as specified and directed.

S & F 15 mm bore UPVC pipe including all necessary fittings (elbow, Tees, socket etc) for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and directed.

S & F 20 mm bore UPVC pipe including all necessary fittings (elbow, Tees, socket etc) for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and directed.

S & F 25 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and directed.

S&F in repair 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any legth with rubber ring joints laid in floors or trenches all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) , waste and rain water pipes single socketed in any length with rubber ring joints complete all as specified and directed.

S & F in repair 160 mm bore PVC (SWR) , waste and rain water pipes single socketed in any length with rubber ring joints complete all as specified and directed.

S & F in repair 160 mm bore PVC (SWR) bends of any radius all as specified and directed.

S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs all as specified and directed.

S & F in repairs 25 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs all as specified and directed.

S & F in repairs 50 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs all as specified and directed.

M&L for in repairs Cast iron floor trap of 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1,(1:2:4) complete all as specified and directed.

M & L in repairs 110mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified.

S & F in repair 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified.

S & F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified.

S & F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified.

M & L 75 in repairs mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified.

M&L for cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggrigate) as in filling in sunken floors all as specified.

M&L for rendering plastering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound finished even and smooth with using extra cement all as specified.

M&L for applying one coat of hot blown bitumenous for sunken surface, all as specified.

Supply only intigral water proofing compound all as directed .

S&F in repair health faucet chromium plated with CP pipe of 1.4 m long with jet spray with PVC chord and connector complete all as spd and directed.

S&F in repair Waste pipes 32 mm dia LDPE ,UPVC pipes of pressure rating 6 Kg/cm2 for wash basins and urinals complete all as spd and directed.

S&F in repairs grating round with or without waste hole of size 100mm dia, chromium plate complete all as specified.

Demolition of PCC flooring (unreinforced) exc 15cm thick but above ground floor for sunken floors and removing debries out side to Dockyard premesis all as specified and directed.

S&F in repair corner glass shelfe of 5.5mm thick sheet glass of 300 radiuswith chromium plate bracket guard and railing with alumium alloy bracket , complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 SqM each but (Without taking off shutters from the frame) and removing away from site complete all as spd and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supporting and fixing in opening as per specification and drawing

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as spd and directed.

S&F in repair toilet paper holder of chromium plated complete all as specified and directed.

S & F in repair soap dish of chromium plated of size 160 x 160 x 90 mm fixed to plug with chromium plated brass screw complete all as specified.

S&F in repair chromium plated tubular towel rail 'D' Type of 20mm dia bore and 600mm long complete all as specified and directed.

S&F 100mm Stainless steel butt hinges fixed with SS screws all as specified and directed.

S&F 150mm aluminium anodized barrel tower bolt of extruded section all as specified and direced.

S&F 125mm aluminium anodized handles, cast type all as specified and direced.

Supply and fix anodized aluminium standard sections of weight not less than 0.55 Kg per Meter as in sliding window with two/ three tracks with 5.5 mm thick plain glass with rubber beading, aluminium beading, clips etc., complete all as specified and directed.

Supply and fix aluminium decorative grill of any and shape not less than 2.70 Kg./Sq.m all as specified and directed.

M&L for complete removal of existing treatment on existing wall surface and applying tree coat fo white wash on cieling over one coat of chalk white, complete all as specified.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down water etc., complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work for concrete surface and finished even smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth even without usig extra cement complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of weather proof exterior emulsion paint on walls over one coat of chalk white complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat fo oil bound distemper on walls over one coat of chalk white complete all as specified and directed.

S&F in repairs door closer hydraulically (aluminium extruded section body) regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Dismantling of wall and ceiling board (fibre, pulp, insulation etc.,) or insulation board / slabs / of any thickness including cover fillets complete all as specified and directed.

Supply and fix false ceiling with anodised aluminium snap grid frame of size 605 x 605mm using main and cross tee of size 15mm x 156 mm x1/5 mm (weight not less than 0.12kg/RM) and wall angle of size 410mm x 25mm x 2mm (weight not less than 0.36Kg/RM) aluminium frame work fixed with screws to walls and aluminium frame supported from soffits of RCC Slab / any other roof frame with GI hanger wire of 3mm dia (upto 1200mm length) by adjusting level fixed to roof slab with fastnes and providing insulation and acoustic purpose ceiling tiles of size 600mm x 600mm of compressed Gypsum boards of 5mm thick with decorative lamination on the other side complete as specfied and directed.

M&L for cleaning and removing all scale and dirt, etc, from tanks capacity exc 250Ltrs and not exc 500 Ltrs and from mouths of circulating pipes, etc., complete as specfied and directed.

M&L for cleaning and removing all scale and dirt, etc., from tanks capacity exc 500 Ltrs and not exc 1000 Ltrs and from mouths of circulating pipes, etc., complete as specfied and directed.

M&L for cleaning and removing all scale and dirt, etc, from tanks capacity exc. 1000Ltrs and nexc 2000 Ltrs and from mouths of circulating pipes, etc., complete as specfied and directed.

S&F in repairs 25 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete as specfied and directed.

S&F in repairs PVC / HDPE water tank covers for tanks of capacity 500 to 1000 Ltrs complete as specfied and directed.

S&F in repairs PVC / HDPE water tanks covers for tanks of capacity 1000 above to 5000 Ltrs complete as specfied and directed.

S&F in repairs mortice locking arrangement suitable for doors of 30 mm to 40 mm thickness of any description to lock the doors from both sides including necessary cutting if required in the door shutter / frame to fit the lock complete as specfied and directed.

Taking down aluminnium shutters of doors, windows of any description exc. 1 Sqm but not exceeding 2 sqm each for complaints received from the users of ND(V) and refixing the same in the same opening after replacing of unserviceable screws, cleat, rubber packing, aluminum snap beading etc., and tightening complete all as specified and as directed. [Note:- Rate is inclusive of rubber beading, aluminum snap beading, screws, cleat etc.,]

Taking down aluminium shutters of windows, ventilators etc., of any description not exc 1 Sqm each for complaints received from the users of ND(V) and refixing the same in the same opening after replacing of unserviceable screws, cleat, rubber packing, aluminum snap beading etc., and tightening complete all as specified and as directed. [Note :- Rate is inclusive of rubber beading, aluminum snap beading, screws, cleat etc.,]

Taking down wooden shutters of windows, ventilators etc., of any description or any size each for complaints received from the users of ND(V) and refixing the same in the same opening after replacing of unserviceable screws, Hinge,Hasp and staple, tower bolt etc., and tightening complete all as specified and as directed. (Note :- Rate is inclusive of screws, Hinge, Hasp and staple, tower bolt etc.,)

L DURGA GANESH