AUGMENTATION AND SITC OF SEWAGE PUMPING STATION WITH RELATED MECHANICAL, ELECTRICAL, INSTRUMENTATION AND MISELLANIOUS WORK FOR NANA CHILODA SPS AND NEW AMBAWADI SPS OF AHMEDABAD MUNICIPAL CORPORATION (AMC).

estimated cost, as mentioned above. Amount of my / our tender works out for Rs. ________________ (in figures)

Estimated amount put to tender Rs. Estimated amount put to tender Rs.

2) Lump Sump Amount Quoted for Buy Back Items (as per Annexure-I) in Scope of Work (Section A-3, A.3.8), Rs. _____________

Signature of Contractor

Company’s seal :

1. Bidder has to quote % Above (Premium) or % Below (Discount) or As part of total Job, Rs. 2,88,48,172/- (i.e.

Total Estimated Project Cost w/o buyback value) and has to carry out work at Ordered Value with any Excess -

Less Qty. mentioned in above items as per site requirement and instruction of Engineer-in-charge.

2. Bidder shall quote for buyback items as per Annexure-1 in Scope of Work, Section A-3(A.3.8) separately

online at Sr. 2 as indicated above. Bidder to note that net amount quoted by the bidder shall be determined by

deducting the total amount of buyback quoted by bidder from the amount quoted for works as above at Sr. No.

deducting the total amount of buyback quoted by bidder from the amount quoted for works as above at Sr. No.

1 and the net amount so derived shall be considered for Price Evaluation purpose to determine lowest bid.

TOTAL SUMMARY OF COST

Name Augmentation and SITC of Related Mechanical, Electrical, Instrumentation

Of and Miscellaneous works for Nana Chiloda and New Ambawadi Sewage

Work Pumping station of Ahmedabad Municipal Corporation (AMC).

ITEM DESCRIPTION AMOUNT

A NANA CHILODA SPS CAPITAL COST

B NEW AMBAWADI SPS CAPITAL COST

C TOTAL OF CAPITAL COST (A + B ) (EXCLUDING GST)

BUY BACK AMOUNT IN RS. (NANA CHILODA SPS)

(AS PER ANNEXURE-I)

BUY BACK AMOUNT IN RS. (NEW AMBAWADI SPS)

(AS PER ANNEXURE-I)

F TOTAL BUY BACK AMOUNT IN RS. ( D + E )

TOTAL AMOUNT AFTER DEDUCTION OF BUY

TOTAL AMOUNT AFTER DEDUCTION OF BUY

BACK VALUE IN RS. ( C - F)

SUMMARY OF COST

Name Augmentation and SITC of Related Mechanical, Electrical, Instrumentation

Of and Miscellaneous works For Nana Chiloda Sewage Pumping station of

Work Ahmedabad Municipal Corporation (AMC).

ITEM DESCRIPTION AMOUNT

A MECHANICAL WORK

B. INSTRUMENTATION WORK

C. ELECTRICAL WORK

D MISCELLANEOUS WORK

E. TOOLS & TEST EQUIPMENTS

TOTAL OF CAPITAL COST (A + B + C + D + E)

(EXCLUDING GST)

Name Augmentation and SITC of Related Mechanical, Electrical, Instrumentation and Miscellaneous

of works for Nana Chiloda Sewage Pumping station of Ahmedabad Municipal Corporation (AMC).

MECHANICAL WORK

Sr. Item Qty. Unit Unit Rate Total

No. (in Rs.) Amount

1.1.1 Pump Type 1 :- SUBMERSIBLE NON-CLOG 2 Nos. 7,01,761.00

Supply, Installation, Testing and Commissioning

(SITC) of Submersible NC Pump-Motor set suitable

for sewage application with semi-open or enclosed or

suitable type Impeller & wear Rings in CF8M with CI

FG 260 Casing & casing cover, SS 410 shaft & with

motor suitable for 3-Phase, 415 V, 50 Hz., AC

induction Air filled dry type submersible motor of

mini. rating as specified having max. 1500 RPM sync.

speed, insulation Class 'F' With temp. rise limited to

class B and IP-68 protection.

The scope shall include all required accessories viz.

automatic coupling device, SS- 304 heavy duty & of

suitable size double guide pipes of length to suit the

sump height with required supports, SS-304 or

suitable stainless steel grade Chain with shackles

(shall be with dual hook / shackles of 100 mm or

suitable higher size at app. every 1.5m C-C distance)

& of length as per sump height + min. 3m,

Submersible Power & control cable (copper flexible

& stranded type conductor of reqd. cores & size for

each pump motor set) & length of sump height + min.

5 m long each run with necessary electrical

termination connection at junction box /starter panel

and RCC foundation blocks for auto coupling &

delivery bend, PMU etc. complete as per IS, Tender

Drawings and Specification and also including in

scope any other parts / accessories / fittings required

to complete the work in all respects & satisfactory

operation of pump set.

Pump Capacity :400 m3 / hr.

Motor Rating: min. 37 kW (50 HP)(or higher

rating as reco. by pump manufacturer)

1.2.1 Pump Type 2 :- SUBMERSIBLE NON-CLOG 2 Nos. 4,84,957.00

Supply, Installation, Testing and Commissioning

(SITC) of Submersible NC Pump-Motor set suitable

for sewage application with semi-open or enclosed or

suitable type Impeller & wear Rings in CF8M with CI

FG 260 Casing & casing cover, SS 410 shaft & with

motor suitable for 3-Phase, 415 V, 50 Hz., AC

induction Air filled dry type submersible motor of

mini. rating as specified having max. 1500 RPM sync.

speed, insulation Class 'F' With temp. rise limited to

class B and IP-68 protection.The scope shall include

all required accessories viz. automatic coupling

device, SS- 304 heavy duty & of suitable size double

guide pipes of length to suit the sump height with

required supports, SS-304 or suitable stainless steel

grade Chain with shackles (shall be with dual hook /

shackles of 100 mm or suitable higher size at app.

every 1.5m C-C distance) & of length as per sump

height + min. 3m, Submersible Power & control cable

(copper flexible & stranded type conductor of reqd.

cores & size for each pump motor set) & length of

sump height + min. 5 m long each run with necessary

electrical termination connection at junction box

/starter panel and RCC foundation blocks for auto

coupling & delivery bend, PMU etc. complete as per

IS, Tender Drawings and Specification and also

including in scope any other parts / accessories /

fittings required to complete the work in all respects

& satisfactory operation of pump set.Pump Capacity

Motor Rating: min. 22 kW (30 HP)(or higher

rating as reco. by pump manufacturer)

NOTE: 1 nos. Pump Store stand-by as per

Instruction by Engineer In-charge.

2.1.1 Supply, Installation, Testing and Commissioning of 2 Nos. 20,535.00

Manually gear operated CI / DI Double Flanged,

Rising Spindle type, Sluice Valve. conforming to IS

14846 PN 1.0 with SS 304 seat rings and SS spindle

with all hot dipped galvanised hardware's, bolts, nuts

& washers, gaskets, etc. as per data sheet.

Size : 250 mm NB (Manually Operated On Delivery

Line on Pump Type- 1 )

2.1.2 Size : 200 mm NB (Manually Operated On Delivery 1 Nos. 12,805.00

Line Pump Type :-2)

2.2.1 Supply, Installation, Testing and Commissioning of 2 Nos. 28,776.00

CI / DI Double flanged DPCV conforming to IS 5312-

Part-2, PN 1.6 having swing check, Single door

design with dead weight arrangement for no slam

having CI door, SS hinge as per IS with all stainless

steel hardware and gaskets, etc. as per specification of

following sizes:

Size :250 mm NB (Delivery side of each Pump Type

2.2.2 Size :200 mm NB (Delivery side of each Pump Type 1 Nos. 17,313.00

2.3.1 SITC of Manually operated ISI mark CI D/F 1 Nos. 33,775.00

Butterfly Valve as per IS 13095WITH ISI MARK

PN 1.0 with sleeve of EPDM & disc, shaft & internal

parts of SS 410 along with gaskets and all other

necessary hardware etc. of following diameter

including all taxes, insurance, transportation, freight

charges, Inspection Charges loading unloading,

conveyence to pump house stacking, security etc.

complete as per IS and Specification.

Size: 400 mm NB (On Header Pipe after Flowmeter)

2.4.1 SITC of CI / DI Tempor proof Flanged Air Valve 1 Nos. 11,600.00

with Isolation Sluice Valve as per IS 14845 PN-1.0 &

IS-14846 PN-1.0 respectively with SS304 float, gun

metal nozzle, complete hardware's, bolts, nuts &

washers, gaskets etc. including all taxes, Insurance,

Transportation, freight charges, Inspection charges,

loading, unloading, conveyance to departmental

stores, stacking, security etc. as per IS and

Specification.Size: 50 mm NB - Pn

3.1.1 Supply, installation, testing and commissioning of 2 Nos. 7,745.00

double flanged Expansion Bellows confirming to

EJMA/IS standard with PN 1.0 rating & all necessary

St. hardware's.

Size : 250 mm x 300 mm ( L ) (on Delivery of Pump

3.1.2 Size :200 mm x 300 mm ( L ) (On Delivery Line of 1 Nos. 6,216.00

3.1.3 Size :400 mm x 300 mm ( L ) (On Header Pipe Line) 1 Nos. 16,500.00

4.1.1 C.I. PIPES & SPECIALS 5000 kg 58.00

Manufacture, Supply and delivery of CI flange ended

Pipes complete as per IS 1536 / 1537, Class B or its

latest revision for various dia meter and classes The

delivery of pipes to be made to Pump house/site

including all taxes , loading carting, unloading,

stacking, insurance, octroi, inspection charges etc.

complete as per IS and as per specifications.

Size : 200 mm NB and Above ( For Pump Delivery

4.2.1 Labour Charge of CI flange ended Pipes complete as 5000 kg 11.00

per IS 1536 / 1537, Class B or its latest revision for

various dia meter and classes The delivery of pipes to

be made to Pump house/site including all taxes

loading carting, unloading, stacking, insurance,

octroi, inspection charges etc. complete as per IS and

as per specifications.

Size : 200 mm NB and Above ( For Pump Delivery

5.1.1 MS PIPES & SPECIALS 10 RMT 2,587.00

Supply, Gas cutting of pipe, Fabrication, welding,

Installation, testing and commissioning of MS pipe &

Specials, reducer, expander, Y-Joint, Tee, Band

etc. conforming to IS 3589 & flanges confirming to IS

6392-PN-1.0, fabricated from MS. plate with

necessary supports & anchoring. Pipe fabricated from

MS plate. (Excluding supply of flange)

Size :250 mm NB X 5.0 mm Thk

5.1.2 Size :200 mm NB X 6.3 mm Thk 5 RMT 2,553.00

5.1.3 Size :400 mm NB X 6.3mm Thk 20 RMT 4,747.00

5.2.1 Providing epoxy coating to inside pipe line with two 8 Sq.m 332.00

parts of Solvent free high build liquid epoxy lining as

per AWWA C210-07 Suitable for potable water

application & shall be approved by CFTRI- India/BS

6920-UK/international standard /NSF/ANSI/-61

to be fit for contact with potable water for human

consumption with 406 micron thickness. inclusive of

necessary materials , labour ,Equipment ,Contractor's

overhead charges and profit and including all taxes.

Size : 250 mm NB X 5 mm Thk

5.2.2 Size : 200 mm NB X 6.3 mm Thk 3 Sq.m 332.00

5.2.3 Size : 400 mm NB X 6.3 mm Thk 25 Sq.m 332.00

5.3.1 Supply and installation of MS Blind flange 1 No. 6,566.00

conforming to IS- 1538 with gaskets, hardware and

required accessories as per specifications.Size :

mm (Blind) - (On Main Header end)

5.4.1 Supply, welding , Installation, testing & 10 Nos. 3,234.00

commissioning of MS flat machnied faced flanges

confirming to IS 6392 & drilled to IS - 1538 with

drilling off center bolt holes and flange thickness as

per PN 1.0 including cutting & welding

Size : 250 mm NB (Drilled)

5.4.2 Size : 200 mm NB (Drilled) 5 Nos. 2,548.00

5.4.3 Size : 400 mm NB (Drilled) 20 Nos. 6,076.00

6.1.1 Flanged Joints of Pipes, Fittings and Specials: 30 Nos. 837.00

Supply, Installation, Making of Flanged CI Pipes,

Fittings and Specials Joints with all jointing materials,

rubber packing, nut bolts, labour etc.for complete

Size : 200 mm Dia

6.1.2 Size : 250 mm Dia 20 Nos. 1,007.00

6.1.3 Size :400 mm Dia 20 Nos. 1,699.00

7.1.1 G.I. PIPES & FITTINGS: 5 RMT 387.00

Supply, installation, connection with equipments as

required, testing and commissioning of GI pipe

conforming to IS-1239 , Medium Duty with coupling,

tee, bend, union, elbow, flanges , etc as all required

fittings for connection complete with gaskets,

hardware, and required accessories as per IS &

8.1.1 Supplying & Fixing SMC Chequered plate having 10 30 Sq.Mtr. 4,493.00

mm thickness, made out of SMC Confirming to IS

13410 & by Hot press Compression Moulding

technique Suitable cut & fixed with MS Angle Frame

to Fit Trench Widths as per site requirement approved

by engineer incharge. Provide as per Actual Site

9.1.1 MONORAIL EOT WITH ELECTRIC CHAIN 1 No. 2,52,000.00

HOIST(OUTDOOR TYPE)

Supply, installation, testing & commissioning of

Electrically Operated Chain Hoist & Electrically

operated Trolley, suitable to operate on Mono Rail

Girder having motorised motion, manufactured as per

IS:6547-1972-Class-II & IS-3177- Class-II, complete

with brake, chain-gear, motors, safety device, pendant

push button, starter panel, cables from motor to starter

panel and all other required accessories like limit

switches, power supply system (Fastoon cable type),

fasteners, epoxy painting, etc. tested for over load as

per IS and as per specifications, complete in all

Capacity : min. 2.0 Ton. Min. ((For Nog Clog Sub.

Lift : 16.00 m as mini. or as per site req.

Bay Length : 10 m (w/o MONORAIL GIRDER &

MS supporting structure)

Note: Minimum as specified capacity or higher as per

requirement such that EOT with ECH capacity is

min.1.25 times of the pump /motor OR single heaviest

component to be lifted within pump house.

9.1.2 FIXED ELECTRIC HOIST WITH STRUCTURE 1 Nos. 2,15,250.00

FOR EXISTING SCREEN.

Supply, installation, testing, commissioning of fixed

Electrically Operated Chain Hoist having motorised

motion for vertial lifting with fixing Girder

manufactured as per IS:6547 1972, Class-II, complete

with brake, chain, guide, elec. motor, safety device,

pendant control switch, push button station, starter

panel, cables from motor to starter panel and all other

required accessories like limit switches, panel, power

supply system , fasteners, epoxy painting, etc. with

required steel structure and tested to 50 % over load

complete as per specifications.Note: (1) Capacity of

Hoist shall be higher of Minimum as specified or

times the weight of eqipment or single heaviest

components to be handled. Scope also includes all

necessory civil work, foundation work, column work,

etc required to complete the installation work.

Capacity: 2.0 Ton. Min. (For Screen)

Lift : 10.00 m as mini. (Or as per site requirement)

10.1.1 Providing and Supplying at site of work with M.S. 3000 kg 72.91

anchor bolts, channels, angles, chequered plates, all

other type of inserts, ladder, ISMB etc. in concrete

members during concreting as per instructions in all

positions and at any level including keeping them in

correct position and alignment, including adjustment

of reinforcement and shuttering, etc. complete and

including two coats of approved oil paint over one

coat of zinc-rich primer over exposed surfaces of

above mentioned inserts after embedment, etc. all

as specified."Providing and Supplying at site of work

with M.S. anchor bolts, channels, angles, chequered

plates , all other type of inserts, ladder, ISMB etc. in

concrete members during concreting as per

instructions in all positions and at any level including

keeping them in correct position and alignment,

including adjustment of reinforcement and shuttering,

etc. complete and including two coats of approved oil

paint over one coat of zinc-rich primer over exposed

surfaces of above mentioned inserts after

embedment, etc. all as specified. (min. 250 mm I-

Beam gireder for Vertical & Horinzontal column, for

Monorail etc. as required to complete the work in all

respects & satisfactory operation of Manual Chain

For Construction of monorail girder for Fixed

Electric Hoist And all required accessories and

hardware and as per instruction given by Engineer

10.1.2 Labor Charges for lowering,laying,fixing with 3000 Kg 11.36

fabrication at site with M.S. anchor bolts, channels,

angles, chequered plates, all other type of inserts,

ladder, ISMB etc. in concrete members during

concreting as per instructions in all positions and at

any level including keeping them in correct position

and alignment, including adjustment of reinforcement

and shuttering, etc. complete and including two coats

of approved oil paint over one coat of zinc-rich primer

over exposed surfaces of above mentioned inserts

after embedment, etc. all as specified. (min.

mm I-Beam gireder for Vertical & Horinzontal

column, for Monorail etc. as required to complete the

work in all respects & satisfactory operation of

Manual Chain Hoist)

For Construction of monorail girder for Fixed

Electric Hoist And all required accessories and

hardware and as per instruction given by Engineer

11.1.1 Construction of Shed : 30 Sq. Mtr 216.10

1.80 mm FRP sheet used for Construction of Shed

for Sump and shad size should be as per instruction

given by Engineer In-Charge.

12.1.1 Providing, Supply of Structure Steel at site of work 500 Kg 64.83

with freight, loading, unloading carting, etc. including

all taxes and duties complete such as joints, channels,

angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates,

Chequered plates

(below 10mm thickness) for cable trench etc. required

for support structure of all Electro-mechanical

equipment, piping, etc. for support on floor / wall /

beam / brackets etc. as per tender and IS.

12.1.2 Labour Charges for lowering, laying, Fixing with 500 Kg 11.37

fabrication various size section of MS such as joints,

channels, angles, Iron Rails, ISA/ISMC/ISMB/MS

flat, Plates,n Chequered plates, for cable trench etc

Complete with two coats of red oxide and two coats

of approved colour shade of epoxy paint as per

relevant IS and as per specification.

13.1.1 DISMANTLING OF EXISTING PUMP-MOTOR 1 Job 30,000.00

Dismantling of All Existing Pump-Motor Set of

Existing Pump House covering with Plastic and

packing in Wooden Box with all required accessories

and transportation & stacking at AMC store / site or

As per instruction Given by The Engineer In-

13.1.2 DISMANTLING, CARTING AND STACKING 1 Job 20,000.00

(Mechanical Items)

Dismantling of All existing Valves, , Drain Pumps,

Pipes and Specials (Tees, Band etc) etc. of Existing

Pump House covering with Plastic and packing in

wooden box with all required accessories and

transportation & stacking at AMC store / site or as per

instruction given by the engineer In-Charge.

13.1.3 DISMANTLING, CARTING AND STACKING 1 Job 20,000.00

(Electrical Items)

Dismantling of all existing MCC Panel and switch

Gear Panel, Cables, Cable Trays, lighting fixtures,

existing lighting wiring including loading, shifting &

unloading at location in plant compound as directed

by Enng. in charge of AMC.

TOTAL ESIMATE COST OF MECHANICAL WORK (W/O GST)

Name Augmentation and SITC of Related Mechanical, Electrical, Instrumentation and Miscellaneous

Of works for Nana Chiloda Sewage Pumping station of Ahmedabad Municipal Corporation (AMC).

INSTRUMENTATION WORK

Sr. Item Qty. Unit Unit Rate Total

No. (in Rs.) Amount

1.1.1 PRESSURE MEASURMENT SYSTEM 4 Nos. 950.00

Supply, installation, testing & commissioning of Bourden

type Pressure Guage glycerene filled having 100 mm dial

with necessary fittings / accessories (Manifold valve,

nipples, etc. shall be in SS 316 only) as per specifications

& complete in all respects.

(On delivery of each Pump and Header).

Range : 0 - 6 kg / sq.cm.

1.1.2 Installation, Testing & Commissioning of Bourden type 4 Nos. 79.00

1.2.1 Supply of Digital Pressure Transmitter along with, 1 Nos. 26,903.00

manifold valve, required fittings, tubing (all valves,

fittings, tubings, etc. shall be in SS 316 only) all

accessories, hardware, etc. complete in all respects as per

specifications and having following measurement ranges:

Range : 0 - 6 Kg/cm2 (On Main Header)

1.2.2 Installation, Testing and Commissioning of Digital 1 Nos. 2,244.00

Pressure Transmitter

2.1.1 LEVEL MEASURING SYSTEM 1 Nos. 54,860.00

Supply of Ultrasonic type Level Transmitter along with

all required accessories with Large Display, hardware,

hardware, etc. complete in all respects with local and

remote display, as per specification. The scope also

includes providing 4" flanged , puddle pipe approximate

300 mm long including fixing of the same in civil structure

slabe of pump house for mounting of level

Transmitter.The work also include all necessary work like

make hole,repair / modificationin existing slab, etc.Level

Transmitter having following measurement ranges for

liquid (Water) application:

Meas. Range: upto 20 m (at any one compartment of

sump) For Sump.

2.1.2 Installation, testing and commissioning of Ultrasonic type 1 No. 4,576.00

Level Transmitter

2.2.1 Supply, installation, testing and commissioning of Float 1 No. 11,816.00

type Level Switch along with 25 mtr. Cable and WP

Junction Box (at Upstream of Manual Screen for high

level alarm and wet well for Dry run Protection of Pump)

complete in all respects and as per specification.The scope

also includes providing 4" flanged , puddle pipe

approximate 300 mm long including

fixing of the same in existing civil structure slabe of pump

house for mounting of level switch.The work also include

all necessary work like make hole, repair / modificationin

existing slab, etc.

Meas. Range: upto 20 m

2.2.2 Installation, Testing and Commissioning of Float type 1 No. 986.00

2.3.1 Supply, installation, testing & commissioning of Float & 1 No. 16,353.00

Board type level indicator along with all accessories,

hardware, etc. complete in all respects as per

specifications and having following measurement ranges:

Meas. Range: up to 20 m (as per Existing Sump)

2.3.2 Installation, testing & commissioning of Float & Board 1 No. 1,365.00

type level indicator

3.1.1 ELECTRO MAGNETIC FLOW METER 1 Nos. 2,01,632.00

Supply, installation, testing and commissioning of remote

type Full Bore Electromagnetic flow meter comprising of

IP-68 Sensor, IP-65/66 remote transmitter with 10m cable

between sensor and transmitter,Panel mounted flow

indicator cum Totalizer along with all mounting

accessories, hardware, etc. complete in all respect and as

per specs and shall have following size and measurement

range. The scope also includes necessary connection with

Meter Size : 400 mm

Pipe size: 400 mm

Pipe Material : C.I. / M.S.

3.1.2 Installation, Testing and Commisioning of Electro 1 Nos. 9,488.00

Magnetic Flow Meter

4.1.1 Necessary modification /provision in existing Central 1 Lot 75,000.00

SCADA System at Central Control Room of AMC to

monitor and control SPS from Central Control Room.

The Scope shall include acqusition of data of SPS

graphics development, Data mapping, Alarm

management, logic development, Storage and Screen

development, etc for monitoring and control from existing

Central SCADA shall be carried out by sucessfull bidder

or existing SCADA contractor / Vendor and if it is carried

outby the existing SCADA contractor the required charges

as per this item shall be paid by successfull bidder of SP

to Existing Central SCADA Contractor.

Client/ AMC shall provide necessary support to bidder for

access in existing Central SCADA for necessary

modification & development as described above.

5.1.1 INSTRUMENT CABLE & ACCESSORIES 250 MTR 147.00

'Supply, Laying, Installation, Connection, Termination,

Testing & Commissioning of Instrument Cables, along

with cable glands, lugs, cable trays, required junction

boxes, fittings and accessores as per specs.

The unit rate shall include

a. Supply, loading & unloading of the cable at site from

B. Shifitng of cable from site store to place of installation.

c. Fixing of cable clamps, brackets, supports, route

markers etc. where ever required to fix the cables safely.

d. Excavation, back filling and levelling of ground

alongwith laying of fine sand, protection bricks and other

necessary civil material for laying cables outside the

e Testing and submission of sketches & reports of all the

Cable Length is Approx. Provide as per Actual Site

5.1.2 CONTROL CABLE 250 MTR 128.00

Cable Length is Approx. Provide as per Actual Site

5.1.3 SIGNAL CABLE 250 MTR 150.00

Cable Length is Approx. Provide as per Actual Site

5.2.1 INSTRUMENT CABLE TRAY 150 MTR 302.00

GI Perorated type cable tray shall be made out of

galvanized MS sheets of 2.0 mm thickness with required

asccessories . All material shall be Hot dip galvanised (816

g/m2) as per IS 2629 as mentioned in specification and

tray hardware shall be in GI.50 x 50 mm - Perforated

typeCable Length is Approx. Provide as per Actual Site

5.3.1 CABLE END TERMINATION AND CONNECTION 20 Nos. 57.00

'Supply, fixing, connection, testing and commissioning of

double compression brass cable glands and crimping type

Bimetalic lugs / sockets with necessary tools and

equipments as specified in specifications and IS complete

in all respects. The glands and lugs / sockets shall be

suitable for cable size and type mentioned above. The job

also includes earthing the glands and armour of the cable

with common earth bar or flexible copper mesh as

5.3.2 CONTROL CABLE 20 Nos. 49.00

5.3.3 SIGNAL CABLE 20 Nos. 180.00

TOTAL ESTIMATE COST OF INSTRUMENTATION WORK (W/O GST)

Name Augmentation and SITC of Related Mechanical, Electrical, Instrumentation and Miscellaneous

Of works for Nana Chiloda Sewage Pumping station of Ahmedabad Municipal Corporation (AMC).

ELECTRICAL WORK

Sr. Item Unit Rate Total

No. Qty. Unit (in Rs.) Amount

1.1.1 Power Supply Board 1 Set 43,183.00

TPN MCCB (For LT Service Obtaining Requirement)

SITC of 250 A TPN microprocessor MCCB (50kA)

with O/L, S/C & E/F protection with Extended rotary

handle, Terminal spreader, Auxiliary change over&

Trip contact, with Outdoor Enclosure with canopy

2mm thick , Single/double door & Wall mounted/

stand mounted as per site requirement (with incoming

& outgoing cable entry at bottom )with Cable end

boxes with RYB indicating lamp, Digital voltmeter,

VSS, ON,OFF & Trip indicating lamp etc as per

Power supply company requirements & location.

Including all civil works for fixing of panel on wall.

(A) 4 Pole, MCCB with Breaking Capacity of

Icu=50 KA at 415V (Ics =100% of Icu),

Microprocessor release.

(Wall mounted at Location as per PSC req.)

2.1.1 PMCC PANEL BOARD (PMCC): 1 Lot 10,71,535.00

SITC of suitable Stand alone PMCC Panel (50kA)

suitable for Manual & Auto Operation-Local &

through PLC/SCADA operation as per site conditions

complete in all respects as per SLD / Specification / IS

and including following as minimum:

(1) One nos. FP 250A Microprocessor MCCB for I/C

with Digital Voltmeter with Voltmeter Selector

Switch, Digital Power Factor Meter, Digital Ammeter

with Ammeter selector switch, MFM with RS-485, R,

Y, B, on, off, trip Indicating lamps & ON, E-STOP,

Reset Pushbutton, etc.

(2) 250 A TPN Main busbars. (Main & Auxilary bus-

bars size with current density 0.8A/Sq.mm)

(3) Two Nos. (1W+1S) Star-Delta starter for min.

kW Motor or higher as per pump Manufacturer reco.

with 125A TPN MP MCCB with Adjustable O/L &

Adjustable S/C Protection, (63A, 63A, 63A) AC3

duty Contactors (3 Nos.), O/L relay, Star-Delta Timer,

Ammeter with ASS, MFM with RS-485 CL.0.5, Resin

Cast CT Cl:0.5, PMU, MPR with RS-485, CBCT,

SPP, Auto-Manual, Local-Remote Selector Switch,

on, off, trip Indicating lamps & ON, Push Buttons for

S/D Starter etc.

(4) Two Nos. (1W+1S) Star-Delta starter for min

kW Motor or higher as per pump Manufacturer reco.

with 80A TPN MP MCCB with Adjustable O/L &

Adjustable S/C Protection, (50A, 50A, 50A) AC3

duty Contactors (3 Nos.), O/L relay, Star-Delta Timer,

Ammeter with ASS, MFM with RS-485 CL.0.5, Resin

Cast CT Cl:0.5,PMU, MPR with RS-485, CBCT, SPP,

Auto-Manual, Local-Remote Selector Switch, on, off,

trip Indicating lamps & ON, Push Buttons for S/D

(5) Auto Power Factor Correction : 100 A MCCB I/C,

7 Step Relay,(5.1) 2nos. 20 kVAR capacitor bank with

32A 'D' curve MCB & 20 kVAR Capacitor duty

contactor with timer.(5.2) 1nos. 10 kVAR capacitor

bank with 20A 'D' curve MCB & 10 kVAR Capacitor

duty contactor with timer.(5.3) 1 nos. 5 kVAR

capacitor bank with 16A 'D' curve MCB & 05 kVAR

Capacitor duty contactor with timer.(5.4) 2 nos.

kVAR capacitor bank with 16A 'D' curve MCB &

kVAR Capacitor duty contactor with timer.(5.5) 1 nos.

1 kVAR capacitor bank with 16A 'D' curve MCB &

01 kVAR Capacitor duty contactor with timer. (6)

Nos. 32A TPN MCCB Spare Feeder. (7) Three nos.

63ATPN MCCB feeders (for 2 Nos. PDB - Auxiliary

accessories load & 1 No. Spare)(8) 6 nos. 32A 'C'

curve MCB feeders (for Indoor and Outdoor LDB,

Chain Hoist & ,2 nos. Spare)(9) One no. Outdoor

lighting LDB feeder with 32A TPN 'C' curve MCB

with 32A contactor & Time switch.(10) 1 Nos. 160A

TPN MCCB Spare Feeder with ON, OFF, Trip

Indication Lamp.(11) 3nos. 16A DP MCB feeders (for

3 Spare.) (12) 3nos. 250A /5A, Cl.-0.5 metering

CT.(13) 1 No. 250 A/ 5A Cl-0.5 APFC CT.(14) 1nos.

Multiplication relay for dry run protection of pumps

2.2.1 SITC of Lighting Distribution Board (LDB) as 1 Nos. 7,494.00

under:(Indoor and Ourdoor LDB)

3 Phase 4 Wire TPN, 6 way Prewired LDB (One each

for Indoor & Outdoor Lighting) Suitable to house :

Incoming: 32A FP, ELMCB (30mA)

Outgoing: 20A SP MCB 'C' curve (9 nos.) & 16A SP

MCB 'C' curve (9 nos.)

(At Panel Room)

2.2.2 SITC of Power Distribution Board (PDB) as under: 1 Nos. 10,009.00

3 Phase 4 Wire TPN, 8 way Pre-wired-MOG / MOV

PDB for Auxiliary accessories Load power supply

(For MOV Pump delivery valves, valve at Header &

for auxiliary load & spare):

Incoming: 63A 4P, MCB 'C' Curve

Outgoing: 10 Nos. 32A 4P MCB 'C' Curve

2.3.1 SITC of stand / wall mounting type MS Junction Box, 3 Nos 2,050.00

minimum 2.5mm thick, with detachable cable gland

plate of 3mm thick, duly powder coated, with earthing

terminals, steel structure stand for mounting of JB, etc.

for Jointing/Termination suitable for 1.1 kV

Submersible Flexible Copper Power cable with

Aluminium/ Copper armoured power cable from

PMCC . Scope shall include providing suitable rating

AL busbars, Support insulators, Crimping type

lugs,nuts,bolts,washers etc. complete in all respects as

instructed by E.I.C. Drawing shall be got approved

before SITC of the same. Lugs of cables shall not be

connected directly. (Structure steel for Stand shall be

measured separately)

JB of minimum Size: 300mm x 300mm x 100mm or

higher as required. or higher as required (for Each

2.3.2 SITC of stand / wall mounting type MS Junction Box, 3 Nos 2,050.00

minimum 2.5mm thick, with detachable cable gland

plate of 3mm thick, duly powder coated, with earthing

terminals, steel structure stand for mounting of JB, etc.

for Joining/Termination suitable for 1.1 kV

Submersible Flexible Control Cables of Submersible

pump with control cable from PMCC. Scope shall

include providing Terminal connectors for connecting

control cable, copper lugs, etc. complete in all respects

as instructed by E.I.C. 20% additional/spare Terminal

connector shall be provided. Drawing shall be got

approved before SITC of the same.

SMC/FRP/Bakelite separator shall be provided

between Power cable section & Control cable section.

Lugs of cables shall not be connected directly

(Structure steel for Stand shall be measured

JB of minimum Size: 300mm x 300mm x 100mm or

higher as required. or higher as required (for Each

2.4.1 LOCAL CONTROL STATION 3 Nos. 4,840.00

SITC of Pendant type ON_OFF LCS with pushbutton

set complete with Enclosure (IP 68), necessary

mounting/ fixing arrangement on wall / pipe support

etc. to be installed near motors for remote operation,

etc. as per IS and specifications. (including structural

steel) (For Each Pumps)

3.1.1 LOW VOLTAGE (LT) CABLES 100 Mtr 423.00

Supply and unloading & delivery at site, storage &

security at site of 1.1 kV, A2XFY/2XWY XLPE

insulated (IS 7098) / PVC insulated (IS 1554) AL / Cu

conductor cables as per specification & IS. The cable

when laid outside the building shall be laid

underground in excavated trench, as per specified

method and shall be laid in prepared trench on cable

tray when laid inside the building.

3.5C x 120 sq. mm. A2XFY Cable (1 Runs for PSB to

Cable Length is Approx. Provide as per Actual Site

3.1.2 3C x 35 sq. mm. A2XFY Cable (2 Runs for each 37 300 Mtr 144.00

kW Pump Motor (or higher as per pump manufacturer

Cable Length is Approx. Provide as per Actual Site

3.1.3 3C x 16 sq. mm. A2XFY Cable (2 Runs for each 22 100 Mtr 91.00

kW Pump Motor (or higher as per pump manufacturer

Cable Length is Approx. Provide as per Actual Site

3.1.4 4C x 6 sq. mm. A2XFY Cable (For WR-DB with TPN 200 Mtr 78.00

Cable Length is Approx. Provide as per Actual Site

3.1.5 4C x 4 sq. mm. 2XWY/2XFY Cable (Motor Heater, 200 Mtr 141.00

motor pushbutton,Outdoor LDB and Indoor LDB)

Cable Length is Approx. Provide as per Actual Site

3.1.6 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each TPN 200 Mtr 81.00

MCB for ECH and Monorail EOT Hoist, TPN MCB

at PMCC room, Street Light)

Cable Length is Approx. Provide as per Actual Site

3.1.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each 200 Mtr 177.00

Motor space heate, for level switch)

Cable Length is Approx. Provide as per Actual Site

3.1.8 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For Each 200 Mtr 115.00

Motor LCS with Ameter. )

Cable Length is Approx. Provide as per Actual Site

3.1.9 12C x 1.5 sq.mm. 2XWY/2XFY Cable (For PMU of 500 Mtr 390.00

Cable Length is Approx. Provide as per Actual Site

3.1.10 10Tride x 1.0 sq.mm. individual triad and overall 300 Mtr 460.00

shielded with aluminium mylar tape Signal Cable for

RTD & BTD of motor (1Run Motor to S/S Panel)

3.2.1 CABLE END TERMINATION AND 2 Nos. 444.00

SITC of Double compression Weather proof type Ni-

Plated brass cable glands and crimping type Bimetalic

lugs / sockets with necessary tools and equipments as

specified in specifications and IS.The glands and lugs

/ sockets shall be suitable for cable size and type

mentioned below & as per specificaitons.1) Earthing

the glands and armouring with earthing clamp and

jumper and also connecting to common earth bar.2)

The job also includes, if necessary, supply & fixing of

extension busbar of same material on MCCB or panel

board terminal / connector to connect more than one

no. of parallel cables or to connect higher size cable to

lower size unit. The job also includes earthing the

glands and armour of the cable with common earth bar

or flexible copper mesh.(Cable termination qty. shall

be as per siterequirement)

3.5C x120 sq. mm. A2XFY Cable (1Runs for PSB to

3.2.2 3C x 35 sq. mm. A2XFY Cable (2 Runs for each 30 8 Nos. 215.00

kW Pump Motor (or higher as per pump manufacturer

3.2.3 3C x 16 sq. mm. A2XFY Cable (2 Runs for each 22 4 Nos. 160.00

kW Pump Motor (or higher as per pump manufacturer

3.2.4 4C x 6 sq. mm. A2XFY Cable (For WR-DB with TPN 12 Nos. 111.00

MCB at Sump & Pump House, 2 nos.PDB)

3.2.5 4C x 4 sq. mm. 2XWY/2XFY Cable (Motor Heater, 10 Nos. 111.00

motor pushbutton, Outdoor LDB, Indoor LDB, )

3.2.6 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each TPN 30 Nos. 77.00

MCB for ECH and monorail EOT Hoist, Each TPN

MCB at MCC Panel room & , , Street Light)

3.2.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each. 8 Nos. 75.00

Motor space heater, for level switch)

3.2.8 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For Each 12 Nos. 89.00

Motor LCS with Ameter. )

3.2.9 12C x 1.5 sq.mm. 2XWY/2XFY Cable (For Each 10 Nos. 129.00

3.2.10 10Tride x 1.0 sq.mm. individual triad and overall 6 Nos. 230.00

shielded with aluminum mylar tape Signal Cable for

RTD & BTD of motor (1Run Motor to S/S Panel)

3.3.1 CABLE TRAY 100 Mtr. 456.00

SITC of GI ladder type cable trays with side channels

of size - 75 x 15 x 15 mm/ 100 x 15 x 15 mm & rungs

of size - 35 x15 x 15 mm spaced at 250 mm apart,

fabricated from 2 mm thick sheet steel in standard

length of 2.5 meter, duly hot dipped galvanized after

fabrication as per IS 2629- 1989/ IS 4759-1984

including accessories such as coupler plates/ fish

plates, bends, tees, reducers, elbows, covers and

electro- galvanized hardware etc, erected on existing

support as per specification and instruction of engineer

300 x 100 mm - Ladder type (Cable Tray Length is

Approx. Provide as per Actual Site Requirements.)

3.3.2 150 x 100 mm - Ladder type (Cable Tray Length is 100 Mtr. 402.00

Approx. Provide as per Actual Site Requirements.)

3.4.1 Supply & laying GI perforated type cable trays with 100 Mtr. 228.00

returned edge/ flange, fabricated from 2.0 mm thk

sheet steel in the standard length of 2.5 mtrs, duly hot

dipped galvanized after fabrication as per IS 2629-

1989 / IS 4759-1984 including accessories such as

coupler plates/ fish plates, bends, tees, reducers,

elbows, covers and electro-galvanized hardware etc,

erected on existing support as per specification and

instruction of engineer in charge.

100 x 35 mm x 2.0 mm thick

3.5.1 Supply, laying and erection of 120 mm approved 50 Mtr 136.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground / road

surface for enclosing cable and back filling the same

to make ground as per original.) (DWC Length is

Approx. Provide as per Actual Site Requirements.)

3.5.2 Supply, laying and erection of 90 mm approved 100 Mtr 95.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground / road

surface for enclosing cable and back filling the same

to make ground as per original.

(DWC Length is Approx. Provide as per Actual

Site Requirements.)

3.5.3 Supply, laying and erection of 50 mm approved 100 Mtr 62.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground / road

surface for enclosing cable and back filling the same

to make ground as per original. (For Street Light).

(DWC Length is Approx. Provide as per Actual

Site Requirements.)

4.1.1 CHEMICAL EARTHING SYSTEM 5 Nos 7,025.00

SITC of chemical earthing with earthpit of minimum

bore size dia. 225mm Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS-

3043:1987 made of corrosion free G.I. Pipes having

Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising or copper coated solid steel road /

flat strip type connection terminal 14mm dia with

constant ohmic value surrounded by highly

conductive corrosion resistant chemical compound

with high charge dissipation suitable for electrical

installation of 440V of 2Mtr. length of Pipe with

one no. 25Kg. bag of Back filling compound.

( 2 Nos for MCC & Each Nos. Motor)

4.1.2 SITC of pipe type earthing having 150 cms long and 5 Nos 365.00

2.5cms dia. Galvanised iron pipe with coupling and

buch buried in specially prepared earth pit complete

with necessary 8 SWG earth wire (For EachSt. light

4.1.3 SITC of 50mm(w) x 6mm(T) etc. sizes as required, 115 Kg 77.00

HOT deep GI Strip including supply & fixing using

GI spacers, saddles when laid inside the building and

inclusive of excavation & refilling of earth when laid

outside the building & interconnection with earth pit

& all electro-mechanical equipments.

(50X6 G.I Strip wt.2.3 kg/m, 2.3x 50 mtr.=115kg.)

(PMCC Panel etc.)

4.1.4 Supply, laying and erection of 25mm(w) x 3mm(T) 120 Kg 77.00

etc. sizes as required, HOT deep GI Strip including

supply & fixing using GI spacers, saddles when laid

inside the building and inclusive of excavation &

refilling of earth when laid outside the building &

interconnection with earth pit & all electro-

mechanical equipments.

(25X3 G.I Strip, 0.6 Kg/m, 0.6x 200 mtr.=120 Kg.)

(Pump-Motor etc.)

4.1.5 SITC of HOT Dip Galvanized iron strip wire 8 SWG 26 Kg 77.00

(For LDB, PDB, LCS, etc.)

(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 250Mt.=26)

5.1.1 INTERNAL WIRING 200 Mtr 95.00

SITC of Mains & outlet points wiring with 1.1 kV

grade FRLS PVC insulated ISI marked flexible

stranded copper conductor wires with medium class

min. 25mm. dia. Rigid PVC pipe and accessories

to be erected concealed in / to be run on surface / wall

/ ceiling with following sizes as mentioned below. The

unit rate wirings shall be with connector, PVC

junction box, wires, holder, ceiling rose, angle

holder, switch, sockets, switch board, brass

chromium / cadmium plated machine screws, phase

and neutral wires, green Earth continuity wires etc. as

required to complete wiring from LDB panel to the

final outlet termination points. The wiring shall be

as per IS:732, IS:4648 and as per tender

specification / IS.

(a) SITC of Mains wiring with 3 wire 1.5 sq.mm.

5.1.2 As per Above Item SITC (b) of Mains wiring with 3 200 Mtr 124.00

wire 2.5 sq.mm.

5.1.3 As per Above Item1 (c) SITC of Mains wiring with 4 200 Mtr 114.00

wire 1.5 sq.mm.

5.1.4 As per Above Item(d) SITC of Mains wiring with 4 200 Mtr 147.00

5.2.1 SITC of Point wiring for Light / fan / Bell / Primary 11 Nos 445.00

Point with 2nos. 1.5 sq. mm & earth wire of 1.5 sq.

mm (green) both are of ISI marked 1.1 kv grade FRLS

PVC insulated multistrand copper wires, pipe to be

erected concealed in flushed on wall / ceiling,

complete with 6A Tissino Type ISI marked flush type

switch / bell push & accessories erected on metal /

PVC Box covered with 3 mm thick PC

(Polycarbonate) / Acrylic sheet with necessary

lamp holder / ceiling Rose / H. D. connector as

directed with medium class Rigid PVC pipe &

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete

5.2.2 SITC of 6A independent Plug with 2nos. 1.5 sq.mm 5 Nos 310.00

Cu. Mains size wiring & earthwire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires with

medium class Rigid PVC pipe and accessories to be

erected on wall / ceiling, complete with ISI marked

/ 5 Pin socket and tissino type switch erected with

earth continuity connection erected on Metal / PVC

box covered with 3 mm thick PC(Polycarbonet) /

Acrylic sheet. ( 5 nos. at Pump House cum PMCC

5.2.3 SITC of One 300/380 mm dia. Ex fan 16A 2 Nos 829.00

independent Plug point near Ex. Fan with 2nos.

sq.mm Cu. Mains size wiring & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires with

medium class Rigid PVC pipe and accessories to

be erected on wall / ceiling, complete with ISI

marked 3Pin socket and tissino type switch erected

with earth continuity connection erected on Metal /

PVC box covered with 3 mm thick PC(Polycarbonet)

/ Acrylic sheet. Plug point shall be near Ex.Fan.

(For 2 nos. Pump House cum Panel room)

5.2.4 SITC of 5/15A independent Plug with 2nos. 4 sq.mm 2 Nos 601.00

Cu. Mains size wiring & earthwire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires with medium

class Rigid PVC pipe and accessories to be erected on

wall / ceiling, complete with ISI marked 3 / 5 Pin

socket and tissino type switch erected with earth

continuity connection erected on Metal / PVC box

covered with 3 mm thick PC(Polycarbonet) / Acrylic

( For 2 nos. Pump House cum LT Room)

5.2.5 SITC of Single Phase 20A 3 Pin Matal clad 2 Nos. 845.00

Industrial Type Socket with plug top and 20A

SPMCB, suitable for flush mounting, in 16 SWG MS

box of suitable size and covered with 3 mm thick

electrical grade hylam sheet or eqivalent ISI marked

Electrical grade bakelite sheet and earthing with

2.5 sq.mm insulated copper wire run inside the

conduit including interconnections etc. complete as

required. (2 no.PMCC Room cum pump House)

5.3.1 SITC of 415V Four Pole MCB Switch (C Curve) 3 Nos 573.00

having 10KA breaking capacity & confirms to

IS:8828 having capacity, 32A, CAT-III (For 1no.

Pump House cum LT Room, For Elect. Hoist at Pump

5.3.2 SITC of 3 watts LED Lamps integral type,cool white 1 Nos. 69.00

with PC diffuser suitable for LAMP holder.

(For Panel room cum LT Room)

5.4.1 1200mm sweep ceiling fan, capacitor type, having 1 Set 1,581.00

double ball bearing 450mm down rod, canopies,

shackle, rubber bush, blades, electronic speed

regulator, suitable to operate on 230V,50Hz AC

supply conforming to IS: 374/1979.Fan shall be

painted with white colour.

(1Nos For Pump office cum LT Room)

5.4.2 380mm sweep 1400 R.P.M exhaust fan, capacitor 2 Nos. 3,052.00

type, having double ball bearing, M.S.blades,

mounting frame, forearms, suitable to operate on

230V,50 HZ AC supply conforming to IS: 2312.Fan

shall be painted with epoxy grey colour controlled by

one 6 A flush type switch on board and 6A plug point

(2 Nos. Pump office cum LT Room)

6.1.1 LED LIGHT FIXTURES: 6 Nos 530.00

SITC of Indoor wall mounting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA polyester powder coated and high U.V. &

corrosion resistance with diffuser and/or

Polycarbonate optics with company mark/name 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT

4000 K to 6500K, Uniformity ratio >0.7, Luminaire

efficacy> 85 lumens/watt ,LED driver efficiency >

%(Each fitting required LM-79 & LM-80

Certificates)40 Watt or up to 25% higher wattage

Tube Light with integral / non-integral driver,

Surge-4KV, IP-20, 4 feet, Cat-III (For 6 nos. Pump

office cum LT Room)

6.2.1 SITC of Surface mounted LED Indoor Flood light 2 Nos. 6,028.00

fittings with High power White LEDs wattage of

1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

120 to 300 V,Power Factor more than 0.95, THD <

Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80 certificates)

90 Watt Indoor Flood Light (IP-65), Surge -4KV

(2 Nos. Pump office cum LT Room)

6.2.2 SITC of 'B' class galvanised iron pipe 32 mm outside 2 Nos. 340.00

dia 45 cmslong duly welded on 20 cms x 20 cms x

mm thick M.S. base plate, erected on wall or corner

for mounting luminaire with necessary hardware

materials duly painted for wall mounting indoor flood

light fixtures on Wall of Buildings.

7.1.1 EXTERNAL LED LIGHT FIXTURES & 10 Nos. 6,028.00

SITC of Wall mounted 80W LED Outdoor Flood

Light fittings with High power White LEDs wattage

of 1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

embossed 120 to 300 V,Power Factor more than 0.95,

THD < 10 %, CCT 5000 K to 5700K, Uniformity ratio

>0.45, Luminaire efficacy> 85 lumens/watt . LED

driver efficiency > 85 %. ( Each fittings required LM-

79 & LM-80 certificates) Flood Light (IP-65), Surge

-4KV, 80 watt Cat-III

(10 Nos For Outdoor Side Area )

7.1.2 SITC of 'B' class galvanised iron pipe 32 mm 10 Nos 340.00

outside dia 45 cms long duly welded on 20 cms x

cms x 3 mm thick M.S. base plate, erected on wall or

corner for mounting luminaire with necessary

hardware materials duly painted for wall mounting

indoor & outdoor flood light fixtures on Wall of

8.1.1 Supplying and erecting 70W LED Street light 10 Nos. 5,917.00

fittings with High power White LEDs wattage of

1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

embossed120 to 300 V,Power Factor more than 0.95,

THD < 10 %, CCT5000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 85 lumens/watt .

LEDdriver efficiency > 85 %.( Each fittings required

LM-79 & LM-80 certificates)Street Light (IP-65),

Surge -4KV, 70 watt Cat-III

8.1.2 SITC of Street Light Pole, steel tubular swaged type, 10 Nos. 7,175.00

7.5 meter long with single arm & M.S.base plate with

pipe cap and over hung 1.5 m long having dia to suit

the socket of 240V LED street light fixtures. Street

light pole unit rate shall be with (i) Earthing of lighting

poles & shall be conforming to IS 2713 : 1980 as per

specification/drawing.

8.1.3 SITC of 1.5 Mtr. single Arm Street Light pole 10 Nos. 620.00

bracket consisting of medium class MS pipe of

cms. Out side dia complete with suitable sleeve tubing

45 cms. long M S. pipe (Medium Class). Suitable for

76.5 mm /80mm / required size of pole top having

sufficient fastners for fixing the brackets and having

spread of 1.5.mtr. length with 110 deg.with vertical

plane & suitable welded stays, reducer and with check

nuts complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU paint.

8.1.4 SITC of M-20 / 1:2:4 cement concrete foundation & 10 Nos. 1,280.00

70 % PCC from bottom including excavation for the

pole of size 60 x 60 x 120 cms. Deep in below ground

level with plinth of 45 cms x 45 cms(or 45 cms dia x

45 cms) high upper ground level with necessary curing

and finishing in approved manner.

8.1.5 SITC of Water tight M.S.Box of size 20 x 15 x 15 10 Nos. 343.00

cms. to erect suitable kitkat fuse / MCB to be . erected

on polished wooden board inside the box with

hinged/sliding door with rubber rings and erected on

pole with suitable pole clamp, all duly painted with

one coat of red oxide and two coats of paints and with

1no. 6A SP 'D' curve MCB.

8.1.6 SITC of cable clamp of 25 mm X 3 mm M.S. flat 10 Nos. 141.00

suitable for fixing 2nos.of armoured st. light cable

with nuts and bolts for 140 mm diameter pole.

8.1.7 SITC of 50mm Dia. 'B' class, Galvanised iron pipe 15 Mtr 323.00

having smooth finished bore of the pipe on both ends

erected nuts and bolts along the st. light pole / wall

shaping the pipe for st. light pole cable as per site

requirement. (1.5mt. Each piece x nos. = mt.)

8.1.8 Painting of 7.5 mtr. street light pole with bracket 10 Nos. 332.00

complete with two coats of Aluminium paint as per

specification & tender.

9.1.1 SAFETY ACCESSORIES 2 Nos 8,586.00

SITC of following safety accessories complete with

necessary fixing brackets, other accessories and

tools etc. as required to complete the job.

Supply & Erecting carbon dioxide (CO2) fire

extinguisher of 6.5kg capacity with necessary clamps

made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete. (for , 2no. LT Room )

9.1.2 Supplying stand first AID box with anticeptic cream, 1 Nos. 297.00

medicine for use on wounds due burn, crepe bandage,

guage bandage, medicated ready to use bandage

(Band-aid) adhesive tape for medicinal user, scissors,

anticeptic solution (Savlon or similar) etc. (All above

contents shall be of standard makes) (For LT Room)

9.1.3 Providing printed instruction (First Aid) Chart 1 Nos. 129.00

both in English and Gujarati and duly framed with

front glasses, for treatment of person suffering from

electric shock. (1no. For LT Room)

9.1.4 Supplying & fixing of FIRE bucket round bottom of 4 Set 212.00

9 litres capacity made out of 24 guage G.I. sheet with

extra handle at bottom duly painted white inside and

Red outside with FIRE mark, filled with dry sand and

kept on stand provided or hung on wall hook.

9.1.5 Supplying and erecting floor mounting stand for 1 Nos. 933.00

keeping four nos. of FIRE buckets comprising

mm in length, 900 mm height frame made out of

30mm X 30 mm X 4 mm angle iron with cross

supports for legs, welded with 4 hooks and duly

painted with one coat of red lead and two coats of

approved enamelled silver paint.

9.1.6 Supply and fixing of 30 W fluorescent lamp operated 1 No. 4,912.00

emergency light with maintenance free battery for

hours operation during mains power failure.LED

Portable/Rechargeable flood light having die - cast

aluminium enclosure designed for maximum thermal

efficiency of 130lm luminous efficiency at voltage

supply between 140-270V AV/12V DC at operating

temperature of -20 degree to 60degree celcius with

battery back up 3-4hrs

9.1.7 Supply and laying of Synthetic Insulating Mat of Class 4 Mtr 763.00

- A of min. thickness 2 mm as per IS:15652 and with

good electrical insulation property for 1.1KV/3.3KV

as per site requirement. .

(for PMCC Panels)

10.1.1 MISCELLANEOUS: 500 kg 64.84

Providing, Supply of Structure Steel at site of work

with freight, loading, unloading carting, etc. including

all taxes and duties complete such as joints, channels,

angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates,

Chequered plates (below 10mm thickness) etc.

required for support structure of Elecrto-Mechanical

equipments etc. for support on floor / wall / beam /

brackets etc. as per tender and IS.

10.1.2 Labour Charges for lowering, laying, Fixing with 500 kg 11.37

fabrication various size section of MS such as joints,

channels, angles, Iron Rails, ISA/ISMC/ISMB/MS

flat, Plates, Chequered plates etc Complete with two

coats of red oxide and two coats of approved colour

shade of epoxy paint as per relevant IS and as per

11.1.1 LIASONING CHARGES FOR OBTAINING 1 Ls 25,000.00

Liasoning Charges for obtaining N.O.C from

Electrical Inspector / Statutory authority for Power /

Ele. Installation. (Fees shall be paid by tenderer for

obtaining N.O.C. from Electrical Inspector / Statutory

authority on behalf of client and shall be reimbursed

on submission of orignial receipt to Client). Liasoning

Charges shall include preparing required attasted

documents & drawing for obtaining NOC on behalf of

client (Applicable Fees / deposits shall be reimburse

TOTAL ESTIMATE COST OF ELECTRICAL WORK (W/O GST)

Name Augmentation and SITC of Related Mechanical, Electrical, Instrumentation and Miscellaneous works For Nana

Of Chiloda Sewage Pumping station of Ahmedabad Municipal Corporation (AMC).

MISCELLANEOUS CIVIL WORK

Description Qty. Unit Amount

Demolition of Brick work & stone masonry including stacking of

1 serviceable materials and disposal of unserviceable materials with all 15.00 544.950 Cmt

lead and lift. (i) In cement Mortar.

Demolition and disposal of unserviceable materials with all lead and

lift.(i) Unreinforced cement concrete

Demolition and disposal of stacking of serviceable materials and

3 disposal of unserviceable materials with all lead and lift (i) R.C.C 20.00 1047.380 Cmt

Supplying Electric breakar machine for RCC slab or Asphalt

demolishing work on site by using operator, fuel, power supply etc.

complete as directed.(no payment should be allowed for non working

condition of machinary and for pipeline excavation and M.H.

work.allowed only for break down work)(based on previously

approved rate by CE Sir)

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and

getting out the soil and disposal of the surplus excavated soil as

directed within a lead of 50 Meter for following diameter of

pipes.(iii) 300 mm

Add to or deduct from the rate for Bore Holes of 3.5 m Depth, if bore

6 holes are made deeper or shallower than 3.5M. for Piles of following 15.00 539.340 Each

diameter.(iii) 300 mm

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size ; shape

(Usually Uni-Paver Blocks) using black trap good quality aggregate

of 20 mm nominal size for footpath, parking areas, service lanes and

other areas as mentioned in the drawing / instruction of engineer in

charge. Cost includes formworks using rubber mould, Rate providing

and laying paver blocks as per required grading and specification.

The paver block shall be mechanically compacted. The work of

7 paving blocks shall be executed in line and level by skill mason of 500.00 383.040 Sq.mt

flooring work only. It should be laid in such a way that the no cutting

of the paver block to be necessary. If cutting of paver block

necessary then it should be cut by machine only and carting. The

finished surface of the paver block shall have reasonably good, plain

finished. Paver blocks shall be compacted and shall be relaid if

necessary. Gravel or such type of materials shall not be allowed for

production. Laying on 5 cms thick sand bedding.

Supplying and fixing of 300 mm-L x 150 mm-B x 380 mm-H Kerb

block for Footpath in M-20 grade using 20 mm nominal size black

trap aggregate of Sevaliya/Timba or equivalent quality for pre-cast

blocks, reasonably exposed finish/ formwork , mould with well

equipped with vibratory system for kerb stones of approved design

including curing, etc. complete, including the cost of formwork etc.

complete. The rate shall also include necessary cutting of asphalt,

8 fixing the Kerb stones in line and level on 5 cm thick sand bedding -

with necessary equipments and materials. The rate shall also include

the flush pointing in CM (1:3) for all joints of the kerbstones. Filling

of zari alone the sides of the kerb stone fixed with Bituminous

concrete Bituminous concrete / C.C. mixed in proper position to

flush with the road surface as directed by Engineer in change to form

a portable mixture.

Laying on 5 Cms thick sand Bedding

Laying on 5 Cms thick sand Bedding 210.00 350.890 Rmt

Excavation for foundation for loose and soft soil including sorting

9 out and stacking of useful materials and disposing of the excavated -

stuff up to 50 meter lead.

Description Qty. Unit Amount

Filling with available excavated earth (excluding rock) in trenches,

10 plinth, sides of foundation in layers not exceeding 20 cm in depth 110.00 129.100 Cu.m.

consolidating each deposited layer by ramming and watering.

Providing and casting in situ C.C. in grade M-15 (approx. corresp. to

prop. 1:2:4) (proportions as per mix design or as per Table 9 of

IS456 2000 in masses by weigh batching ) using granite, quartzite

trap metal of size 6 mm to 20 mm for RCC work, including

11 scaffolding centering, form work, needle vibrated consolidation, 60.00 4732.000 Cu.m.

curing comp. (excluding cost of reinforcement and neat finishing)

with centering and shuttering/deshuttering etc. comp. for structure

for other than water retaining. Footing (without form work)

Providing and cast in situ C.C. in grade M-20( proportions as per

mix design or as per table of IS456 2000 in masses by weigh

batching) using granite, quartzite trap metal of size 6 mm to 20 mm

for RCC Work including scaffolding centering formwork, needle

vibrated consolidation, curing complete up to 6 meter depth or height

(excluding cost of reinforcement and neat finishing) with centering

and shuttering/ deshuttering etc. complete for structure other than

water retaiing.

A) RCC Footing 140.00 5520.000 Cu.m.

B) RCC column 10.00 7363.000 Cu.m.

C) RCC Beam 20.00 6722.000 Cu.m.

D) RCC Coping 0.00 6722.000 Cu.m. -

E) RCC Slab 5.00 6504.000 Cu.m.

F) RCC Wall 10.00 6779.000 Cu.m.

Supply cutting, Bending, Binding and placing in position steel as per

plan and design and as per ISS 2502 including cost of steel and

binding wire for reservoirs/ structures only including lift up to

meter height or depth below G.L. for all diameters.

Deformed(TMT)bars confirming to relevant IS Fe-500 grade for all

Brick masonry in cement mortar (1:5) using common burnt clay

building bricks having crushing strength not less than 35kg/cm2

including scaffolding,curing, etc. complete for walls, parapets, etc. at

20 mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat of

C.M. 1:3 (1-cement : 3-sand) and 8 mm thick finishing coat of C.M.

1:1 (1-cement : 1 sand) etc. complete.

Providing and applying 15 mm thick cement plaster in single coat on

brick work with floating coat of net cement slurry for interior

plastering of pumphouse and outside plastering of sump upto

finished even and smooth in Cement motar 1 : 3 (1 cement : 3 sand)

including racking out joint curing, scaffolding required if any, with

necessary cement finishing etc. complete as directed.

Writing letter or figures on any surface with black japan paint (stops,

17 comas, hyphens and the like not to be measured and paid for 30.00 3.150

separately) (i) Block (Letters/Figures) (Per 10 Letter pet CM.HT)

Providing throating or plaster strip / ghishi and moulding as

instructed by Engineer in charge.

White washing with lime on wall surface (two coats) to give an even

19 shade including thoroughly booming the surface to remove all dirt, 45.00 12.290 Sq.mt

dust; mortar drops and other foreign matter

Providing and laying broken Chine Mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over

Cement mortar 1:3 to plain or slope and to be tempered to bring

mortar crème out upto surface using white cement including

rounding of junctions and extending them upto 15 cm. along the

wall, clearing with water and oxalic acid etc. as directed.

Description Qty. Unit Amount

Applying two coats of Birla(white cement based) or Asian

(acryliclapy putty) or equivalent & two coats of primer of approved

21 brand and manufacture on new wall surface to give an even shade 2500.00 40.19 Sq.mt

including thoroughly brushing the surface free from mortar dropping

and other foreign matte rand sand papered smooth.

Distempering (two coats) with oil bound distemper of approved

brand and manufacture and of required shade on undecorated wall

surface to give an even shade, over and including a priming coat with

22 distemper primer of approved brand and manufacturer after 2500.00 76.08 Sq.mt

thoroughly brushing the surface free from mortar dropping and other

foreign matter also including preparing the surface even and sand

papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt and remains of

loose powdered materials. Etc. Complete

Providing and fixing standared extruded of alluminimum section of

size 63mm x 38.10mm x 1.2mm (Jindal Section : 2434, @ Wt.

24 Kg/mt.) with colour powder coated alluminium frame for ventilation 1.26 1,163.92 Sq.m

with 5 mm thick frosted glass as details etc complete for Ventilation'

Providing and fixing wsh down watercloset (Europeantype,W.C.Pan)

with integral Por S trap including jointing the trap with soil pipei n

Cement Mortar1:1(1-Cement:1-fine sand) (Seal and cover to beme

25 asured and paid for separately) (A)vitreous China Pattern :(i) in 1.00 1,875.68 No

32 dia. C. P. brass half turn flush cock complete including

earthwork, bed concrete of 1:4:8.

Providing and fixing flat back white colour vitreous china wash

basin 550 mm x 400 mm size with CI brackets painted white. Wash

basin shall have 15 mm dia GI supply pipe, overflow chase, 15 mm

dia pillar cock and stop cock with PVC bottle trap and PVC pipe

26 piece upto wall plus 32 mm dia PVC waste pipe upto floor level 1.00 2,084.70

connected to 32 mm dia CI pipe below floor and connected to nearby

floor trap complete with unions and plumber's white soldered joints

with necessary cleaning eye, complete. All chases cut in wall for

fixing pipes shall be made good in CM (1:4).

Providing and fixing Flat Back Urinal ( Hindware-

44cmx31.5cmx26.5cm) or equivalent approved and of approved

shade including fixing the same in concealed CI brackets, CP

27 spreader, CP dome shaped waste coupling, CP bottle trap with 1.00 1,535.63

flanges, CP angle cock flush pipe making inlet and out let

connections all complete as per the instruction of Engineer - In -

Providing, laying and jointing in true line and level U.P.V.C. Pipe

(SCH-40) for including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at -

28 every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing & fixing gun metal check or non return full way wheel -

30 Providing and fixing brass screw down stop tap. (A) 15mm dia. 2.00 203.79 No

Providing and fixing screw down bib taps of following size.(C)Gun

metal screw down bib tap. i) 15mm dia.

Description Qty. Unit Amount

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement:

2-coarses and :4- graded stone aggregate 20 mm nominal size)

foundation concrete 1:3:6 mix (1-cement : 3-coarse sand : 6-Brick

bats 40+50 mm size) inside plastering 15 mm thick with Cement

Mortar 1:5 (1-Cement : 5-coarse sand)finished with a floating coat of

neat cement and making channels in cement concrete 1:2:4 mix (1-

Cement: 2-Coarses and : 4-stone aggregate 20 mm nominal size)

32 finished smooth complete including curing and festing (i) Inside size 0.00 11,314.02 No -

900mm x 1200 mm and 2.0 M. deep including C.I. cover with frame

size 560mm diameter total weight of cover and frame to be not less

than 128kgs. (Wt. of cover 64Kg. and Wt. of frame 64Kg.) (A) With

230 mm thick walls of brick msonry using brick having crushing

strength not less than 35Kg./Sq.cm. in Cement Mortar 1:5 (1-Cement

: 5-Coarse sand) (1) A type depth 0.90 Metre for 150 mm diameter

Providing and fixing cast iron (Spun) Nahni trap of the following

nominal diameter of self cleaning design with C.I. screaed down or

hinged grating including cost of cutting and making good the walls

and floor 100mm inlet and 50mm outlet. (C) 100mm dia.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C. I. cover with frame of 300 mm x 300 mm

size (inside) with standard weight. (i) Square mouth traps.(B)

150mm x 100mm size P or R type

Providing and fixing100mm size P or Strap for water closet squatting

35 pan including jointing the trap with the pan and soil pipe in cement 1.00 311.85 No

Mortar1:1 (1-Cement : 1-Fine sand) (A) Vitreous China.

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Selt glazed stone ware

pipes including testing of pipes and joints complete.(B)150mm dia.

Constructing brick masonry chamber for under ground C.I.

Inspection chamber and bends with bricks having crushing strength

not less than 35Kg.Cm 2in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm internal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23Kg.) and Wt. of

37 frame 15Kg.) (R.C.C. top slab e with 1:2:4 mix (1-cement :2- coarse 2.00 3,624.51 No

sand :4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete

etc. complete. (ii) Inside dimensions 500mmx700mm and 450mm

deep for pipe line with one or two inlets. (upto 10 ton)

Providing and fixing over roof black colour PVC overhead water

38 tank of approved manufacture with all necessary fittings and 1000.00 3.91 liter

connection etc,complete on terrace.

Providing and fixing 600mm x 450mm bevelled edge mirror of

superior glass mounted on 6mm thick A.C sheet or plywood sheet

and fixed to wooden plugs with C.P brasss crews (B)600mmx20mm

Providing and laying white glazed tiles 6 mm thick in flooring,

treads of steps,walls and landing laid on a bed of 10 mm thick

40 cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush 20.00 908.17 Sq.m

pointing in white cement (Upto 10 ton) In Dedo

Description Qty. Unit Amount

Constructing Slab type M.H. Chamber of the following size

including excavation, refilling, brick bats cement concrete (1:5:10)

of thickness 15 C.M., CC Channel (1:2:4) of thickness 10 C.M.,

finished 15 mm thick cement plaster 12 14 inside & outside (Only

for shaft) in CM 1:3, finishing with cement slurry, P/F 4 mm dia

M.S.Steel HDPE coated steps 35 cm c/c at 35 cm staggered in

41 masonary CM 1:5, RCC Slab in CC 1:1.5:3 of thickness 23 C.M., 1.00 10177.680 No

including Cantering & reinforcement (double jalli at 15 C.M. c/c

bothway 12 mm dia.) but excluding the cost of machine hole seat

cover etc..completed. of Size 1.00 X 1.40 meter (Inside Clear,M.H.

length should be parallel to the flow, for pipe dia <= 800 mm)

(Based on Drainage SOR 2009-10)1.00 to 2.00 meter depth, (Slab at

Ground level) for Rainwater Collection Chamber

Constructing Chamber of following size including excavation,

refilling, BBCC (1:5:10) for foundation, C.C.Channel (1:2:4),

finished 15 mm thick cement plaster inside in CM 1:3, finishing with

42 cement slurry, Brick masonary in CM 1:5 & excluding the cost of 1.00 2261.610 No

chamber seat cover etc..completed. (Based on Drainage SOR 2009-

10) 0.60 X 0.45 mt. size Inside Clear, Depth from 0.0 to 0.90meter

for pipe dia <=150 mm. chamber for dewatering

Providing & Fixing F.R.C. MH seat cover incl. carting to the work

site etc. comp. Directed. (Based on rate of central store) FRC

43 medium duty Chamber seat cover (FRC) cover 706 x 556 x 50 mm 1.00 1633.930 No

rectangular cover frame size 600 x 450 mm clear opening outer size

816 x 666 x 100 mm (MD-10) cover for dewatering Chamber

Providing F.R.C. MH seat cover incl. carting to the work site etc.

comp. Directed. (Based on rate of central store) F.R.C. Extra Heavy

Duty (EHD-35) machine hole Covers & Frames Cover : 728mm ø &

100 mm thick circular cover, 35.00 MT load design, 100x2mm MS

flat allround, 16mm ø plain round bar for lifting the cover & should

be fitted with plastic cups. Frame : 560 mm ø clear opening, outer

size- 888x888x175 mm. On the upper periphery of frame 25 x 3 mm

wide MS flat should be well embed in concrete to protect the edges

of frame. FRC E.H.D.-35 machine hole cover & frame described as

Making connection to the ex.M.H.in running sewer incl. Dewatering

and other required machinery etc. of following dia pipes at any

convenient time. All damaged work shall be well repaired as per -

instructions. etc..complete. (Based on Drainage SOR 2009-10)

connection for dewatering

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17 mm

(of Jindal Section no : 2459 @ wt. of 0.738 Kg/mt), horizontal Three

track member size 92mm x 31.75 mm x 1.30 mm (of Jindal Section

no. 8688, @ Wt. 1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50 mm (of Jindal Section no. 8933, @ Wt.

46 Kg/mt.) with sliding shutters of horizontal member size 40mm x 15.00 1568.270 Smt

18mm x .29 mm (of Jindal section no. 8947 @ wt. 0.456 Kg/mt.)

vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section

no. 8949 @ wt. of 0.456 Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

details etc. PH Window and LT room Windows

Providing and fixing standared extruded of alluminimum section of

size 63mm x 38.10mm x 1.2mm (Jindal Section : 2434, @ Wt.

47 Kg/mt.) with colour powder coated alluminium frame for ventilation 15.00 1163.920 Smt

with 5 mm thick frosted glass as details etc complete for Ventilation

Description Qty. Unit Amount

Providing precast cement concrete jali or louvers 40 mm thick 1:2:4

mix (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm

48 nominal size) reinforced with 1.6 mm dia. Mild steel wire including 25.00 640.200 Smt

roughening, cleaning, fixing and finishing in CM 1:3 and curing,

painting complete

Providing and laying cement concrete flooring 1:2:4 (1 cement :

coarse sand : 4 graded stone aggregate 20 mm nominal size)

including water proofing compound finishing with a floating of neat

cement slurry etc. complete laid in one layer finished including

necessary curing at bottom of sump.

Average 50 mm thick

Providing and laying polished Kota stone slab flooring over 20 mm

(average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand)

50 laid over and jointed with grey cement slurry including rubbing and 115.00 1085.480 Smt

polishing etc. complete at LT & HT, office room & Chlorine room.

Painting two coats including priming coat on new steel & other metal

51 surfaces with enamel paint, brushing, interior to give an even shade 105.00 121.280 Smt

including cleaning the surface of all dirt, dust, other foreign matter.

Removing any kind of pavement incl stacking of serviceble material

disposal of unserviceble material with 50 meter lead and lift.

Labour work for fixing above interlocking blocks on up to 50mm th

sand bedding, levelling, watering and fixing. Rate incl. average 30cm

depth for excavation and or filling, carting away debries/excavated

material up to 5 km and cleaning the site etc. Comp. as directed.

Excavation for pipe line trenches etc. for all with shoring and

strutting if required as per required gradient and line including safety

provisions using siterails and stacking excavated suff including upto -

54 all required lead cleaning the site etc. complete for all lifts and strata

as specified. In all sort of soils and soft murrum

Providing & supplying DI K-9 grade pipe with EPDM gasket for

following nominal bore diameter with internal cement mortar lining

including all taxes, insurance, transportation, frieght charges, Octroi, -

inspection charges, loading unloading, conveyance to stores,

stacking, etc. complete as per IS 8329-2000.

Manufacturing supply &Delivery of Ductile iron flange socket

bends, tees, reducers or any other specials as per BS-EN-545/1995

Class-A series K12 suitable for use with D.I. pipes manufactured as

per IS:8329/1994 delivery of spacials is to be made to GWSSB store -

56 or site of works any where in Gujrat including all taxes,loading,

unloading, carting, stacking, insurance, inspection charges, actrol

etc. complete Socket & Spigot Type

350 mm dia and above 500.00 151.00

Lowering,laying and jointing C. I. S. & S Spun pipes suitable for

tyton joints / motar lined D.I. Pipes of various classes with CI/MS

specials of following diameter in proper position, Grade and -

alignment as directed by Engineer in charge including Hydraulic

testing etc. Comp.

Manufacture, Supply & Delivery, Laying of Electric Resistance

Welded (Up to 400mm)/ Submerged Arc Welded(Above 400mm)

M.S.Pipe having beveled ends plate or coil conforming to IS-3589-

2001 or its latest revision/ ammendment for following thickness

outside diameter at GWSSB store or site anywhere in Gujarat State

including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading conveyance to

Departmental stores, stacking etc. all complete.

Description Qty. Unit Amount

a) upto 914mm OD & upto 10mm Thickness of Plate/Pipe 500.00 70.67 Kg

b) Above 914mm OD & Above 10mm Thickness of Plate/Pipe 500.00 70.17 Kg

Providing and supplying CI/DI Tamper proof /Bi Stream Air valves

with SS 304 Float gun metal nozzle of approved make & quality of

following class and diameter including all taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores, stacking etc. complete. With

Isolating Sluice Valve PN

Lowering, laying & jointing in position following air Valves

including cost of all labour, jointing material, including nut bolts &

giving satisfactory hydraulic testing, etc. complete. With Isolating

Sluice Valve PN

Providing & supplying ISI mark CI D/F Sluice valves as per

IS:14846 (Latest edition) of following class and dia including all

taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental stores,

stacking etc. complete.

PN 1.0 hand wheel operated-400 mm

Lowering, Laying, Jointing in position following C.I / D/F Reflux

valve, Butterfly valves, Sluice Valve and air valves including cost of

62 all labour, jointing material, including nut bolts and giving 2.00 3,967.00

satisfactory hydraulic testing, etc. complete.

Providing in line level plumb, fabricating and fixing three row

horizontal barbed wire fencing and punched tape concertina coil of

turns per meter of 610 mm diameter fixied with clips on top of the

angle iron posts. The punched tape concertina coil having sharp

barbs at every 25 mm spacing shall be 0.5 mm thick and 19 mm

63 width and weighting 13 Kg./100 mtr. (Average) as per manufacture's 265.00 449.000 Rmt.

specification. The rate shall also include providing and fixed

mt. total long MS angle 40 x 40 x 6 mm @ 3.00 mt. c/c spacing

embedded in RCC column, angle posts shall be painted with one

coats of red oxide and two coats of enamel paint of approved quality

at top of compound wall.

Fabricating and fixing in position MS structural section such as flat,

pipes, plates, hold fast, anchoring bolts / bars of required size

including fixing, welding and two coats of approved anti corrosive

64 paint over prime coat of red-oxide including RCC gate column as per 1840.00 82.500 Kg.

drawing etc. complete as directed by Engineer-in-charge.

2.2 m height and 6 m wide main , wicket gate and Toilet Block Door.

Providing and fixing 150 mm x 100 mm intercepting sewer trap

embedded in concrete complete including excavation and backfilling.

Providing and fixing in position PVC vent pipes of 160 mm dia 3 m

Kota stone in Jams and Sills of the window and ventilation and Door

with one molding as directed by Engineer-in-charge

Description Qty. Unit Amount

Providing & fixing in position aluminium grill with 15 micron

natural matt brush finish anodised as per over all size shown on the

drawings and aluminium sections of approved make conforming to

IS:733 and IS : 1285, made out of DG - 104 design ( Jindal or

equivivelent ) fixed with required size F channel, rawl plugs and

screws or with fixing clips, or with expansion hold esters including

necessary filling up of gaps at junctions, at top, bottom and sides

with required PVC/neoprene felt etc. and aluminium snap beading

for glazing / panelling, C. P.brass/stainless steel screws, including

standard anodised aluminium fittings and fixtures of approved make

and of adequate size and in adequate numbers, including cost and

fixing of fixtures etc. complete as per detailed drawings with all lead

Supplying, fixing Push and Pull, 20 gauge rolling shutter of

approved make for the sizes indicated on drawings including hood

cover, channel sliding assembly, helical coil springs, brackets,

interlocking latches, locking arrangements, painting with 2 coats of

enamel paint over one coat of approved primer paint etc. complete.

Shutters having width below 3.5M (gear Operated)

Providing and fixing 40mm dia. GI pipe medium weight quality as

openable type with angle iron support at 1.5 m c/c using 75 x 75 x

mm angles, 1 m long with three rows of pipes as railing including

necessary painting with two coats of approved quality oil paint over

one coat of approved primer including necessary welding, bolting

required, if any

Providing, Fabricating & fixing caution board of size 1.50m x 0.60m

made from ISA 40 x 40 x 5 mm MS angle with 2 nos. supports at

back side vertical member of of angle size 1.10m height (inclu.

0.30m hold fast inserted in compound wall with necessary dis-

mantling and fixing with cement concrete. The rate shall also include

14g MS sheet of size 1.50mt x 0.60mt incl ACP Sheet with Printing

letter with logo as directed by EIC. rate shall incl painting board with

2 coat of enamal paint over one coat of anti-corrosive primer.

Providing and fixing Radium sign board of size 3.00mt x 0.60 mt

made from ACP sheet with writing coloured reflected letter of WDS

name board with necessary clamp for hanging board at pump house

etc. comp as directed by EIC

Providing and fixing smooth surfaces, homogeneous, best quality

mm thick clay tiles of approved make, colour and shade on a 10 mm

73 (1:3) thick cement plaster including 2 coats of apex paint around 500.00 673.00 Smt

Pump house, Chlorine room, Stair cabin, Toilet block and H.T AEC

Providing, Fabricating & fixing WDS name board of Size

3.00mX0.60 made from ISA 50X50X5 mm M.S angle with 3 Nos

supports at back side vertical member of angle size 1.1m ht incl

m hold fast inserted in compound wall with necessary dismantling

74 and fixing with cement concrete. The rate shall also incl 16 g M.S 1.00 15,640.00 No.

sheet of size 3.00X0.60 mt incl ACP Sheet with Printing letter with

AMC logo as directed by EIC. rate shall incl painting board with

coat of enamal paint over one coat of anti-corrosive primer.

TOTAL ESTIMATE COST OF MISCELLANEOUS WORK (W/O GST)

Name Augmentation and SITC of Related Mechanical, Electrical, Instrumentation and Miscellaneous works For Nana Chiloda

Of Sewage Pumping station of Ahmedabad Municipal Corporation (AMC).

Item Qty. Unit Amount

1.1 LADDER 1 Nos. 8,000.00

Ladder shall be made out of light aluminium allow of good strength. They shall be of

step ladder, foldable, self supportig type with sperader of metalic angles or high

1.2 OFFICE FURNITURE 1 Nos. 2,000.00

Office Table of size 1200 mm length X 600 mm width

1.3 Steel Office Chair 2 Nos. 1,000.00

1.4 Steel Cupboard ( 6 feet H x 3.5 feet W x 1.0 feet 4 inch D) 1 Nos. 25,000.00

GRAND TOTAL OF TOOLS, TEST EQUIPMENTS & SPARE PARTS

GRAND TOTAL OF TOOLS, TEST EQUIPMENTS & SPARE PARTS

Note: Above items shall be handed over to AMC during the commencement of SITC work for Nava Chiloda Sewage Pumping Station of

Name Augmentation and SITC of Related Mechanical, Electrical,

of Instrumentation and Miscellaneous works For Nana Chiloda Sewage

Work Pumping station of Ahmedabad Municipal Corporation (AMC).

Sr. Unit Rate Total

No. Item Qty Unit (in Rs.) Amount

1 Existing MCC Panel 1 Lot -

Existing NC-SCF Pump Motor set

(Capacity-375 m3/hr. and 18 Mtr Head)

Existing NC-SCF Pump Motor set

(Capacity-75 m3/hr. and 18 Mtr Head)

TOTAL OF BUYBACK AMOUNT -

Notes: The rate of the items shall be deducted from the capital cost of the tender

and contractor shall carryout all items.

AMC will take final decision whether to sell item or not. If AMC does not

sell particular item, the bidder will not get rebate amount of that item.

SUMMARY OF COST

Name Augmentation and SITC of Related Mechanical, Electrical and

Of Instrumentation works for New Ambawadi Sewage Pumping Station of

Work Ahmedabad Municipal Corporation (AMC).

ITEM DESCRIPTION AMOUNT

A MECHANICAL WORK

B INSTRUMENTATION WORK

C ELECTRICAL WORK

D TOOLS & TEST EQUIPMENTS

E TOTAL OF CAPITAL COST (A + B + C+ D)

Name Augmentation and SITC of Related Mechanical, Electrical and Instrumentation works for New

of Ambawadi Sewage Pumping Station of Ahmedabad Municipal Corporation (AMC).

MECHANICAL WORK

Sr. Item Qty. Unit Unit Rate Total

No. (in Rs.) Amount

1.1.1 Pump Type 1:- SEWAGE HORIZONTAL 4 Nos. 1,69,087.00

NON - CLOG CENTRIFUGAL PUMP -

MOTOR SET (MAIN PUMP)

Supply, installation, testing and commissioning

sewage non clog, back pull out, end suction type

horizontal centrifugal pump with 1.5 to 2% Ni.C.I.

casing, SS CF8M impeller suitable for 3 Phase,

V, 50 Hz., AC supply, 1000/1500 RPM

synchronous speed. The scope shall also include all

required accessories viz. common base plate,

coupling, coupling guard, foundation bolts etc. as

per specifications and data sheet.

Capacity Pump: 450 m³/hr.

Motor Rating: 55KW/ 75 HP

Supply, installation, testing and commissioning foot

mounted squirrel cage induction motor suitable for

3 Phase, 415 V, 50 Hz., AC supply, 1000/1500

RPM synchronous speed and having TEFC

enclosure with Class F insulation with all required

accessories and as per specifications and data sheet.

1.2.1 Pump Type 2:- SUBMERSIBLE NON-CLOG 2 Nos. 11,88,257.00

Supply, Installation, Testing and Commissioning

(SITC) of Submersible NC Pump-Motor set suitable

for sewage application with semi-open or enclosed

or suitable type Impeller & wear Rings in CF8M

with CI FG 260 Casing & casing cover, SS 410 shaft

& with motor suitable for 3-Phase, 415 V, 50 Hz.,

AC induction Air filled dry type submersible motor

of mini. rating as specified having max. 1500 RPM

sync. speed, insulation Class 'F' With temp. rise

limited to class B and IP-68 protection.

The scope shall include all required accessories viz.

automatic coupling device, SS- 304 heavy duty &

of suitable size double guide pipes of length to suit

the sump height with required supports, SS-304 or

suitable stainless steel grade Chain with shackles

(shall be with dual hook / shackles of 100 mm or

suitable higher size at app. every 1.5m C-C

distance) & of length as per sump height + min. 3m,

Submersible Power & control cable (copper flexible

& stranded type conductor of reqd. cores & size for

each pump motor set) & length of sump height +

min. 5 m long each run with necessary electrical

termination connection at junction box /starter panel

and RCC foundation blocks for auto coupling &

delivery bend, PMU etc. complete as per IS, Tender

Drawings and Specification and also including in

scope any other parts / accessories / fittings required

to complete the work in all respects & satisfactory

operation of pump set.

Pump Capacity :550 m3 / hr.

Motor Rating: min. 75 kW (100 HP)(or higher

rating as reco. by pump manufacturer)

2.1.1 VALVES 1 Nos. 4,966.00

Supply, Installation, Testing and Commissioning

Manually gear operated CI / DI Double Flanged,

Rising Spindle type, Sluice Valve conforming to

IS 14846 PN 1.0 with SS 304 seat rings and SS

spindle with hot dipped galvanised hardware's,

bolts, nuts & washers, gaskets, etc. as per data

sheet.Size : 100 mm NB (Manually Operated On

Header Drain valve)

2.1.2.1 Supply of Manually gear operated CI / DI Double 4 Nos. 36,723.00

Flanged, Non - Rising Spindle type, Sluice Valve

conforming to IS 14846 PN 1.0 with SS 304 seat

rings and SS spindle with hot dipped galvanised

hardware's, bolts, nuts & washers, gaskets, etc. as

per data sheet.

Size : 350 mm NB (Manually Operated valve On

Suction Line of Main Pump)

2.1.2.2 Installation, Testing and Commissioning of 4 Nos. 1,742.00

Manually gear operated CI / DI Double Flanged,

Non - Rising Spindle type, Sluice Valve conforming

to IS 14846 PN 1.0 with SS 304 seat rings and SS

spindle with hot dipped galvanised hardware's,

bolts, nuts & washers, gaskets, etc. as per data sheet.

Size : 350 mm NB (Manually Operated valve On

Suction Line of Main Pump)

2.1.3.1 Supply of Manually gear operated CI / DI Double 1 Nos. 25,071.00

Flanged, Non - Rising Spindle type, Sluice Valve

conforming to IS 14846 PN 1.0 with SS 304 seat

rings and SS spindle with hot dipped galvanised

hardware's, bolts, nuts & washers, gaskets, etc. as

per data sheet.

Size : 300 mm NB (Manually Operated valve On

Header Line of Pump Type- 2)

2.1.3.2 Installation, Testing and Commissioning of 1 Nos. 1,141.00

Manually gear operated CI / DI Double Flanged,

Non - Rising Spindle type, Sluice Valve conforming

to IS 14846 PN 1.0 with SS 304 seat rings and SS

spindle with hot dipped galvanised hardware's,

bolts, nuts & washers, gaskets, etc. as per data sheet.

Size : 300 mm NB (Manually Operated valve On

Header Line of Pump Type- 2)

2.1.4.1 Supply of Electrically gear operated CI / DI Double 6 Nos. 1,50,071.00

Flanged, Rising Spindle type, Sluice Valve with

actuator , integral starter,etc. conforming to IS

14846 PN 1.0 with SS 304 seat rings and SS spindle

with all hot dipped galvanised hardware's, bolts,

nuts & washers, gaskets, etc. as per data sheet.

Size : 300 mm NB (Electrically Operated valve

On Delivery Line of Pump Type- 1 & 2)

2.1.4.2 Installation, Testing and Commissioning of 6 Nos. 1,141.00

Electrically gear operated CI / DI Double Flanged,

Rising Spindle type, Sluice Valve with actuator

integral starter, etc. conforming to IS 14846 PN

with SS 304 seat rings and SS spindle with all hot

dipped galvanised hardware's, bolts, nuts &

washers, gaskets, etc. as per data sheet.

Size : 300 mm NB(Electrically Operated valve On

Delivery Line of Pump Type- 1 & 2)

2.1.5.1 Supply of Electrically gear operated CI / DI Double 1 Nos. 1,77,848.00

Flanged, Rising Spindle type, Sluice Valve with

actuator , integral starter,etc. conforming to IS

14846 PN 1.0 with SS 304 seat rings and SS spindle

with all hot dipped galvanised hardware's, bolts,

nuts & washers, gaskets, etc. as per data sheet.

Size : 400 mm NB (Electrical Operated On

2.1.5.2 Installation, Testing and Commissioning of 1 Nos. 1,971.00

Electrically gear operated CI / DI Double Flanged,

Rising Spindle type, Sluice Valve with actuator

integral starter,etc. conforming to IS 14846 PN

with SS 304 seat rings and SS spindle with all hot

dipped galvanised hardware's, bolts, nuts &

washers, gaskets, etc. as per data sheet.

Size : 400 mm NB (Electrical Operated On

2.2.1 Supply of CI / DI Double flanged Non Return 4 Nos. 37,587.00

Valve conforming to IS 5312-Part-2, PN 1.6 having

swing check, Single door design with dead weight

arrangement for nonslam having CI door, SS hinge

as per IS with all stainless steel hardware and

gaskets, etc. as per specification offollowing sizes:

Size : 300 mm NB (Delivery side of each Pump

2.2.2 Supply, installation, testing and commissioning of 2 Nos. 37,587.00

double flanged CI Dual Plate Check Valve

conforming to API 594 Class 300 with CS dual

door, hinge pin & stop pin of SS 410 , springs of

AISI 304 and seat of SS 304 , along with all required

accessories, gaskets and hardware’s, etc. and as per

Size : 300 mm NB (Delivery side of each Pump

2.3.1 SITC of CI / DI Tempor proof Flanged Air Valve 1 Nos. 16,758.00

with Isolation Sluice Valve as per IS 14845 PN-1.0

& IS-14846 PN-1.0 respectively with SS304 float,

gun metal nozzle, complete hardware's, bolts, nuts

& washers, gaskets etc. including all taxes,

Insurance, Transportation, freight charges,

Inspection charges, loading, unloading, conveyance

to departmental stores, stacking, security etc. as per

IS and Specification.

Size: 100 mm NB - PN

3.1.1 Supply, installation, testing and commissioning of 4 Nos. 12,840.00

double flanged Expansion Bellows confirming to

EJMA/IS standard with PN 1.0 rating & all

necessary St. hardware's.

Size : 350 mm x 300 mm ( L ) (on Suction Line of

3.1.2 Size : 300 mm x 300 mm ( L ) (On Delivery Line 7 Nos. 10,200.00

of Pump Type-1 and 2) and (On Header of Pump

3.1.3 Size : 400 mm x 300 mm ( L ) (On Header and near 1 Nos. 16,500.00

by Sluice Valve )

4.1.1 C.I. PIPES & SPECIALS 7500 kg 58.00

Manufacture, Supply and delivery of CI flange

ended Pipes complete as per IS 1536 / 1537, Class

B or its latest revision for various dia meter and

classes The delivery of pipes to be made to Pump

house/site including all taxes , loading carting,

unloading, stacking, insurance, octroi, inspection

charges etc. complete as per IS and as per

specifications.

Size : 200 mm NB and Above ( For Delivery side

4.2.1 Labour Charge of CI flange ended Pipes complete 7500 kg 11.00

as per IS 1536 / 1537, Class B or its latest revision

for various dia meter and classes The delivery of

pipes to be made to Pump house/site including all

taxes , loading carting, unloading, stacking,

insurance, octroi, inspection charges etc. complete

as per IS and as per specifications.

Size : 200 mm NB and Above

5.1.1 MS PIPES & SPECIALS 30 RMT 3,403.00

Supply, Gas cutting of pipe, Fabrication, welding,

Installation, testing and commissioning of MS pipe

& Specials, reducer, expander, Y-Joint, Tee,

Band etc. conforming to IS 3589 & flanges

confirming to IS 6392-PN-1.0, fabricated from MS.

plate with necessary supports & anchoring. Pipe

fabricated from MS plate. (Excluding supply of

Size :300 mm NB X 5.6 mm Thk

5.1.2 Size : 350 mm NB X 5.6 mm Thk 6 RMT 3,736.00

5.1.3 Size : 400 mm NB X 6.3 mm Thk 15 RMT 4,747.00

5.2.1 Providing epoxy coating to inside pipe line with two 28 Sq.m 332.00

parts of Solvent free high build liquid epoxy lining

as per AWWA C210-07 Suitable for potable water

application & shall be approved by CFTRI-

India/BS 6920-UK/international standard

/NSF/ANSI/-61 2004 to be fit for contact with

potable water for human consumption with

micron thickness. inclusive of necessary materials

labour ,Equipment ,Contractor's overhead charges

and profit and including all taxes.

Size : 300 mm NB X 5.6 mm Thk

5.2.2 Size : 350 mm NB X 5.6 mm Thk 7 Sq.m 332.00

5.2.3 Size : 400 mm NB X 6.3 mm Thk 19 Sq.m 332.00

5.3.1 Supply and installation of MS Blind flange 1 No. 6,664.00

conforming to IS- 1538 with gaskets, hardware and

required accessories as per specifications.

Size : 400 mm (Blind) - (On Main Header end Of

5.3.2 Size : 300 mm ( Blind )- (On Header end Of Pump 1 No. 4,214.00

5.4.1 Supply, welding , Installation, testing & 30 Nos. 3,920.00

commissioning of MS flat machnied faced flanges

confirming to IS 6392 & drilled to IS - 1538 with

drilling off center bolt holes and flange thickness as

per PN 1.0 including cutting & welding

Size : 300 mm NB (Drilled)

5.4.2 Size : 350 mm NB (Drilled) 10 Nos. 5,096.00

5.4.3 Size : 400 mm NB (Drilled) 15 Nos. 6,076.00

6.1.1 Flanged Joints of Pipes, Fittings and Specials: 8 Nos. 477.00

Supply, Installation, Making of Flanged CI Pipes,

Fittings and Specials Joints with all jointing

materials, rubber packing, nut bolts, labour etc.for

complete connection.

Size : 100 mm dia

6.1.2 Size : 300 mm Dia 75 Nos. 1,223.00

6.1.3 Size : 350 mm Dia 16 Nos. 1,442.00

6.1.4 size : 400 mm Dia 20 Nos. 1,699.00

7.1.1 G.I. PIPES & FITTINGS: 10 RMT 898.00

Supply, installation, connection with equipments as

required, testing and commissioning of GI pipe

conforming to IS-1239, Medium Duty with

coupling, tee, bend, union, elbow, flanges, etc as all

required fittings for connection complete with

gaskets, hardware, and required accessories as per

IS & Specifications

8.1.1 Supplying & Fixing SMC Chequered plate having 30 Sq. 4,493.00

10 mm thickness, made out of SMC Confirming to Mtr.

IS 13410 & by Hot press Compression Moulding

technique Suitable cut & fixed with MS Angle

Frame to Fit Trench Widths as per site requirement

approved by engineer in charge. Provide as per

Actual Site Requirements.

9.1.1 PORTABLE DEWATERING PUMP 2 Nos. 1,46,348.00

Supply and testing of Submersible Non Clog

Portable Dewatering Pumpset with C.I. casing &

CF8M impeller, 25 m flexible PVC hose pipe of

pump delivery size, rated for 6.0 kg / cm2 presure,

15 mtr SS lifting chain, 20m pair of cable for

motorto starter panel, suitable for 3Phase, 415 V,

Hz AC supply and min. motor rating as indicated

here below, Switch-Starter panel with PMU suitable

inter lock for winding protection, moisture

controller for fault detection and auto stop

facility,with buit-in level switch for dry run

protection and auto stop facility, 20 m suitable size

power supply cable to starter panel, GI/CI pump

stool and other required accessories for wet well.

Capacity: 25 m3 / hr.

Motor Rating: Mini. 3 HP (or higher rating as

reco. by pump manufacturer)

10.1.1 E.O.T. CRANE WITH HOIST 1 Nos. 5,06,250.00

Providing & erecting Single girder type fully

electrically operated E.O.T. crane with electrically

operated hoist, class II duty, geared travelling

trolley with seven meter lift complete with long

travel rail track (40 mm sq. bar), moving or cross

girder, all three motions electrically operated by

suitable rating motor IP 54, control panel & down

pendant control block, brake, safety device, cables

form motor to starter panel & other required

accessories & tested as per IS Specifications.

EOT Crane with single/Box type girder having

motorised motion in all three directions,

manufactured as per IS - 807, IS 3938 & IS - 3177

class-II, complete with electrically operated hoist,

geared trolley, cross girder, rail track, brake, wire

rope drum, motors, safety device, pendant push

button, starter panel, cables from motor to starter

panel and all other required accessories like limit

switches, panel, power supply system (Fastoon

cable type), fasteners, epoxy painting, etc. and

tested to 25 % over load complete as per

specifications.

Note: Minimum as specified capacity or higher as

per requirement such that EOT crane capacity is

min.1.25 times of the pump, motor OR single

heaviest component to be lifted within pump house.

Capacity : 2 Ton. (for Pump Room)

Lift : 15.00 m (As per Site Requred)

Span: 9 m-12 m (or as per actual site condition)

Bay length: 30.0 m (max.)

10.1.2 MONORAIL EOT WITH ELECTRIC CHAIN 1 No. 2,52,000.00

HOIST(OUTDOOR TYPE)

Supply, installation, testing & commissioning of

Electrically Operated Chain Hoist & Electrically

operated Trolley, suitable to operate on Mono Rail

Girder having motorised motion, manufactured as

per IS:6547-1972-Class-II & IS-3177- Class-II,

complete with brake, chain-gear, motors, safety

device, pendant push button, starter panel, cables

from motor to starter panel and all other required

accessories like limit switches, power supply

system (Fastoon cable type), fasteners, epoxy

painting, etc. tested for over load as per IS and as

per specifications, complete in all respect.

Capacity : min. 2.0 Ton. Min. ((For Nog Clog Sub.

Lift : 16.00 m as mini. or as per site req.

Bay Length : 10 m (w/o MONORAIL GIRDER &

MS supporting structure)

Note: Minimum as specified capacity or higher as

per requirement such that EOT with ECH capacity

is min.1.25 times of the pump /motor OR single

heaviest component to be lifted within pump house.

10.1.3 FIXED ELECTRIC HOIST WITH 4 Nos. 2,15,250.00

STRUCTURE FOR EXISTING SCREEN.

Supply, installation, testing, commissioning of

fixed ElectricallyOperated Chain Hoist having

motorised motion for vertial lifting withfixing

Girder , manufactured as per IS:6547 1972, Class-

II, complete with brake, chain, guide, elec. motor,

safety device, pendant control switch, push button

station, starter panel, cables from motor to starter

panel and all other required accessories like limit

switches, panel, power supply system , fasteners,

epoxy painting, etc. with required steel structure

and tested to 50 % over load complete as per

specifications.Note: (1) Capacity of Hoist shall be

higher of Minimum as specified or 1.5 times the

weight of eqipment or single heaviest components

to be handled. Scope also includes all necessory

civil work, foundation work, column work, etc

required to complete the installation work.

Capacity: 2.0 Ton. Min. (For Screen)

Lift : 10.00 m as mini. (Or as per site

11.1.1 GRIT REMOVAL MECHANISM 1 No. 19,95,000.00

Supply, installation, painting, testing, &

commissioning of grab bucket mechanism of

Ton. Capacity with rail girder, brake, trolley, grab

bucket of capacity 1.85 m³, to be operated by

suitable hydraulic power pack, to be mounted in

trooley with sufficient length of hose pipes for grab

The mechanism shall have motorised motion with

squirrel cage induction motors for grab bucket &

cross traverse. Cross traverse movement is @

The job also includes all accessories like limit

switches, panel, power supply system etc.

Crane Capacity : 5 ton. With 0.5 mt3 capacity

Hoisting speed : 3.5 mtr./ min.

Traverse speed : 10 mtr./ min.

Longitudinal speed: 10 mtr / min

Longitudinal travel Length: 9 Meter

(Approximately OR As per site requirement)

Note: Travelling should be as per Site condition.

12.1.1 Providing and Supplying at site of work with M.S. 7000 kg 72.91

anchor bolts, channels, angles, chequered plates,

all other type of inserts, ladder, ISMB etc. in

concrete members during concreting as per

instructions in all positions and at any level

including keeping them in correct position and

alignment, including adjustment of reinforcement

and shuttering, etc. complete and including two

coats of approved oil paint over one coat of zinc-

rich primer over exposed surfaces of above

mentioned inserts after embedment, etc. all as

specified."Providing and Supplying at site of work

with M.S. anchor bolts, channels, angles,

chequered plates , all other type of inserts, ladder,

ISMB etc. in concrete members during concreting

as per instructions in all positions and at any level

including keeping them in correct position and

alignment, including adjustment of reinforcement

and shuttering, etc. complete and including two

coats of approved oil paint over one coat of zinc-

rich primer over exposed surfaces of above

mentioned inserts after embedment, etc. all as

specified. (min. 250 mm I-Beam gireder for

Vertical & Horinzontal column, for Monorail etc. as

required to complete the work in all respects &

satisfactory operation of Manual Chain Hoist)

For Construction of monorail girder for Fixed

Electric Hoist And all required accessories and

hardware and as per instruction given by

Engineer In-Charge.

12.2.1 Labor Charges for lowering,laying,fixing with 7000 Kg 11.36

fabrication at site with M.S. anchor bolts,

channels, angles, chequered plates, all other type of

inserts, ladder, ISMB etc. in concrete members

during concreting as per instructions in all positions

and at any level including keeping them in correct

position and alignment, including adjustment of

reinforcement and shuttering, etc. complete and

including two coats of approved oil paint over one

coat of zinc-rich primer over exposed surfaces of

above mentioned inserts after embedment, etc.

all as specified. (min. 250 mm I-Beam gireder for

Vertical & Horinzontal column, for Monorail etc. as

required to complete the work in all respects &

satisfactory operation of Manual Chain Hoist)

For Construction of monorail girder for Fixed

Electric Hoist And all required accessories and

hardware and as per instruction given by

Engineer In-Charge.

13.1.1 Construction of Shed : 30 Sq. 216.10

1.80 mm FRP sheet used for Construction of Shed Mtr

for Sump and shad size should be as per instruction

given by Engineer In-Charge.

14.1.1 Providing, Supply of Structure Steel at site of work 750 Kg 64.83

with freight, loading, unloading carting, etc.

including all taxes and duties complete such as

joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered plates

(below 10mm thickness) for cable trench etc.

required for support structure of all Electro-

mechanical equipment, piping, etc. for support on

floor / wall / beam / brackets etc. as per tender and

14.2.1 Labour Charges for lowering, laying, Fixing with 750 Kg 11.37

fabrication various size section of MS such as

joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates,n Chequered

plates, for cable trench etc Complete with two coats

of red oxide and two coats of approved colour shade

of epoxy paint as per relevant IS and as per

15.1.1 DISMANTLING OF EXISTING PUMP- 1 Job 51,950.00

Dismantling of All Existing Pump-Motor Set of

Existing Pump House covering with Plastic and

packing in Wooden Box with all required

accessories and transportation & stacking at AMC

store / site or

As per instruction Given by The Engineer In-

15.1.2 DISMANTLING, CARTING AND STACKING 1 Job 50,000.00

(Mechanical Items)

Dismantling of All existing Valves, , Drain

Pumps, Pipes and Specials (Tees, Band etc) etc.

of Existing Pump House covering with Plastic and

packing in wooden box with all required accessories

and transportation & stacking at AMC store / site or

As per instruction given by the engineer In-

15.1.3 DISMANTLING, CARTING AND STACKING 1 Job 50,000.00

(Electrical Items)

Dismantling of all existing MCC Panel and switch

Gear Panel, Cables, Cable Trays, lighting

fixtures, existing lighting wiring including loading,

shifting & unloading at location in plant compound

As directed by Enng. in charge of AMC.

TOTAL ESIMATE COST OF MECHANICAL WORK (W/O GST)

Name Augmentation and SITC of Related Mechanical, Electrical and Instrumentation works for New

Of Ambawadi Sewage Pumping Station of Ahmedabad Municipal Corporation (AMC).

INSTRUMENTATION WORK

Item Qty. Unit Amount

1.1.1 PRESSURE MEASURMENT SYSTEM 7 Nos. 950.00

Supply, installation, testing & commissioning of

Bourden type Pressure Guage glycerene filled having

100 mm dial with necessary fittings / accessories

(Manifold valve, nipples, etc. shall be in SS 316 only)

as per specifications & complete in all respects.

(On delivery of each Pump and Header).

Range : 0 - 6 kg / sq.cm.

1.1.2 Installation, Testing & Commissioning of Bourden type 7 Nos. 79.00

1.2.1 Supply of Digital Pressure Transmitter along with, 1 Nos. 26,903.00

manifold valve, required fittings, tubing (all valves,

fittings, tubings, etc. shall be in SS 316 only) all

accessories, hardware, etc. complete in all respects as

per specifications and having following measurement

Range : 0 - 6 Kg/cm2 (On Main Header)

1.2.2 Installation, Testing and Commissioning of Digital 1 Nos. 2,244.00

Pressure Transmitter

2.1.1 LEVEL MEASURING SYSTEM 1 Nos. 54,860.00

Supply of Ultrasonic type Level Transmitter along

with all required accessories with Large Display,

hardware, hardware, etc. complete in all respects with

local and remote display, as per specification. The

scope also includes providing 4" flanged , puddle pipe

approximate 300 mm long including fixing of the same

in civil structure slabe of pump house for mounting of

level Transmitter.The work also include all necessary

work like make hole,repair / modificationin existing

slab, etc.Level Transmitter having following

measurement ranges for liquid (Water) application:

Meas. Range: upto 20 m (at any one compartment of

sump) For Sump.

2.1.2 Installation, testing and commissioning of Ultrasonic 1 No. 4,576.00

type Level Transmitter

2.2.1 Supply, installation, testing and commissioning of 1 No. 11,816.00

Float type Level Switch along with 25 mtr. Cable and

WP Junction Box (at Upstream of Manual Screen for

high level alarm and wet well for Dry run Protection of

Pump) complete in all respects and as per

specification.The scope also includes providing 4"

flanged , puddle pipe approximate 300 mm long

includingfixing of the same in existing civil structure

slabe of pump house for mounting of level switch.The

work also include all necessary work like make hole,

repair / modificationin existing slab, etc.Meas.

Range: upto 20 m

2.2.2 Installation, Testing and Commissioning of Float type 1 No. 986.00

2.3.1 Supply, installation, testing & commissioning of Float 1 No. 16,353.00

& Board type level indicator along with all

accessories, hardware, etc. complete in all respects as

per specifications and having following measurement

Meas. Range: up to 20 m (as per Existing Sump)

2.3.2 Installation, testing & commissioning of Float & Board 1 No. 1,365.00

type level indicator

3.1.1.1 ELECTRO MAGNETIC FLOW METER 1 Nos. 2,01,632.00

Supply, installation, testing and commissioning of

remote type Full Bore Electromagnetic flow meter

comprising of IP-68 Sensor, IP-65/66 remote

transmitter with 10m cable between sensor and

transmitter, Panel mounted flow indicator cum

Totalizer along with all mounting accessories,

hardware, etc. complete in all respect and as per specs

and shall have following size and measurement range.

The scope also includes necessary connection with

Meter Size : 400 mm

Pipe size: 400 mm

Pipe Material : C.I. / M.S.

3.1.1.2 Installation, Testing and Commissioning of Electro 1 9,488.00

Magnetic Flow Meter

4.1.1 Necessary modification /provision in existing Central 1 Lot 90,000.00

SCADA System at Central Control Room of AMC to

monitor and control SPS from Central Control Room.

The Scope shall include acquisition of data of SPS

graphics development, Data mapping, Alarm

management, logic development, Storage and Screen

development, etc for monitoring and control from

existing Central SCADA shall be carried out by

successful bidder or existing SCADA contractor /

Vendor and if it is carried outby the existing SCADA

contractor the required charges as per this item shall be

paid by successful bidder of SP to Existing Central

SCADA Contractor.

Client/ AMC shall provide necessary support to bidder

for access in existing Central SCADA for necessary

modification & development as described above.

5.1.1 INSTRUMENT CABLE & ACCESSORIES' 300 MTR 147.00

Supply, Laying, Installation, Connection, Termination,

Testing & Commissioning of Instrument Cables, along

with cable glands, lugs, cable trays, required junction

boxes, fittings and accessores as per specs.The unit rate

shall includea. Supply, loading & unloading of the cable

at site from store.B. Shifitng of cable from site store to

place of installation.c. Fixing of cable clamps, brackets,

supports, route markers etc. where ever required to fix

the cables safely.d. Excavation, back filling and

levelling of ground alongwith laying of fine sand,

protection bricks and other necessary civil material for

laying cables outside the building.e Testing and

submission of sketches & reports of all the cables laid.

Cable Length is Approx. Provide as per Actual Site

5.1.2 CONTROL CABLE 300 MTR 128.00

Cable Length is Approx. Provide as per Actual Site

5.1.3 SIGNAL CABLE 300 MTR 150.00

Cable Length is Approx. Provide as per Actual Site

5.2.1 INSTRUMENT CABLE TRAY 200 MTR 302.00

GI Perorated type cable tray shall be made out of

galvanized MS sheets of 2.0 mm thickness with

required asccessories . All material shall be Hot dip

galvanised (816 g/m2) as per IS 2629 as mentioned in

specification and tray hardware shall be in GI.

50 x 50 mm - Perforated type

Cable Length is Approx. Provide as per Actual Site

5.3.1 CABLE END TERMINATION AND 20 Nos. 57.00

'Supply, fixing, connection, testing and commissioning

of double compression brass cable glands and crimping

type Bimetalic lugs / sockets with necessary tools and

equipments as specified in specifications and IS

complete in all respects. The glands and lugs / sockets

shall be suitable for cable size and type mentioned

above. The job also includes earthing the glands and

armour of the cable with common earth bar or flexible

copper mesh as applicable.

5.3.2 CONTROL CABLE 20 Nos. 49.00

5.3.3 SIGNAL CABLE 20 Nos. 180.00

TOTAL ESTIMATE COST OF INSTRUMENTATION WORK (W/O GST)

Name Augmentation and SITC of Related Mechanical, Electrical and Instrumentation

Of works for New Ambawadi Sewage Pumping Station of Ahmedabad Municipal

Work Corporation (AMC).

ELECTRICAL WORK

Sr. No. Item Total

Qty. Unit Amount

1.1.1 Power Supply Board 1 Set 51,828.00

TPN MCCB (For LT Service Obtaining

SITC of 320 A TPN microprocessor MCCB (50kA)

with O/L, S/C & E/F protection with Extended rotary

handle, Terminal spreader, Auxiliary change over&

Trip contact, with Outdoor Enclosure with canopy

2mm thick , Single/double door & Wall mounted/

stand mounted as per site requirement (with incoming

& outgoing cable entry at bottom )with Cable end

boxes with RYB indicating lamp, Digital voltmeter,

VSS, ON,OFF & Trip indicating lamp etc as per

Power supply company requirements & location.

Including all civil works for fixing of panel on wall.

(A) 4 Pole, MCCB with Breaking Capacity of

Icu=50 KA at 415V (Ics =100% of Icu),

Microprocessor release.

(Wall mounted at Location as per PSC req.)

2.1.1 PMCC PANEL BOARD (PMCC): 1 Lot 13,92,011.00

SITC of suitable Stand-alone PMCC Panel (50kA)

suitable for Manual & Auto Operation-Local &

through PLC/SCADA operation as per site conditions

complete in all respects as per SLD / Specification /

IS and including following as minimum:

(1) One nos. FP 320A Microprocessor MCCB for I/C

with Digital Voltmeter with Voltmeter Selector

Switch, Digital Power Factor Meter, Digital

Ammeter with Ammeter selector switch, MFM with

RS-485, R, Y, B, on, off, trip Indicating lamps & ON,

E-STOP, Reset Pushbutton, etc.

(2) 320 A TPN Main busbars. (Main & Auxilary bus-

bars size with current density 0.8A/Sq.mm)

(3) Four Nos. (2W+2S) Star-Delta starter for min.55

kW Motor or higher as per pump Manufacturer reco.

with 160A TPN MP MCCB with Adjustable O/L &

Adjustable S/C Protection, (110A, 110A, 110A)

AC3 duty Contactors (3 Nos.), O/L relay, Star-Delta

Timer, Ammeter with ASS, MFM with RS-485

CL.0.5, Resin Cast CT Cl:0.5, MPR with RS-485,

CBCT, SPP, Auto-Manual, Local-Remote Selector

Switch, on, off, trip Indicating lamps & ON, Push

Buttons for S/D Starter & LCS for Pump-MOV

Actuator with Indication & push button etc.

(4) Two Nos. (1W+1S) Star-Delta starter for min.75

kW Motor or higher as per pump Manufacturer reco.

with 200 A TPN MP MCCB with Adjustable O/L &

Adjustable S/C Protection, (150A, 150A, 150A)

AC3 duty Contactors (3 Nos.), O/L relay, Star-Delta

Timer, Ammeter with ASS, MFM with RS-485

CL.0.5, Resin Cast CT Cl:0.5, PMU, MPR with RS-

485, CBCT, SPP, Auto-Manual, Local-Remote

Selector Switch, on, off, trip Indicating lamps & ON,

Push Buttons for S/D Starter & LCS for Pump-MOV

Actuator with Indication & push button etc.

(5) Auto Power Factor Currection : 125 A MCCB I/C,

(5.1) 2nos. 20 kVAR capacitor bank with 32A 'D'

curve MCB & 20 kVAR Capacitor duty contactor

(5.1) 2nos. 10 kVAR capacitor bank with 20A 'D'

curve MCB & 10 kVAR Capacitor duty contactor

(5.2) 1 nos. 5 kVAR capacitor bank with 16A 'D'

curve MCB & 05 kVAR Capacitor duty contactor

(5.3) 2 nos. 2 kVAR capacitor bank with 16A 'D'

curve MCB & 02 kVAR Capacitor duty contactor

(5.4) 1 nos. 1 kVAR capacitor bank with 16A 'D'

curve MCB & 01 kVAR Capacitor duty contactor

(6) 2 Nos. 32A TPN MCCB Spare Feeder.

(7) Three nos. 63ATPN MCCB feeders (for 2 Nos.

PDB - Auxiliary accessories load & 1 No. Spare)

(8) 1 Nos. 16 A FP MCB with Indication Lamp and

ON, OFF Push Button for Header Elec. Sluice Valve

Actuator Feeder.

(9) 6 nos. 32A 'C' curve MCB feeders (for Indoor and

Outdoor LDB, EOT, Elect. Chain Hoist, & 2 nos.

(10) One no. Outdoor lighting LDB feeder with 32A

TPN 'C' curve MCB with 32A contactor & Time

(11) 3nos. 16A DP MCB feeders (for 3 Spare.)

(12) 3nos. 320 A/5A, Cl.-0.5 metering CT.

(13) 1 nos. 320 A/5A, Cl.-0.5 APFC CT.

(14) 2 nos. Multiplication relay for dry run protection

2.2.1 SITC of Lighting Distribution Board (LDB) as 2 Nos. 7,494.00

under:(Indoor and Ourdoor LDB)

3 Phase 4 Wire TPN, 6 way Prewired LDB (One each

for Indoor & Outdoor Lighting) Suitable to house :

Incoming: 32A FP, ELMCB (30mA)

Outgoing: 20A SP MCB 'C' curve (9 nos.) & 16A SP

MCB 'C' curve (9 nos.)

(At Panel Room)

2.2.2 SITC of Power Distribution Board (PDB) for ECH 1 Nos. 14,211.00

For Screen and Grit Removal Mechanism.3 Phase

4 Wire TPN, 8 way (sheet steel Double door)

Prewired MOV-PDB for Actuator of valves power

supply (For ECH and MOV Pump delivery valves,

valve at Header & spare):Incoming: 63 A TPN,

MCCB.25 KA,Outgoing: 6 nos. 16A TPN MCB 'C'

Curve. and 2 Nos. 32A MCB TPN

2.2.3 SITC of Power Distribution Board (PDB) for 1 Nos. 7,509.00

Pump Delivery Valve.

3 Phase 4 Wire TPN, 8 way Prewired MOV-PDB for

Actuator of valves power supply (For ECH and

MOV Pump delivery valves, valve at Header &

Incoming: 32 A TPN, MCB. 'C' curve.

Outgoing: 6 nos. 16A TP MCB 'C' Curve.

2.3.1 SITC of stand / wall mounting type MS Junction Box, 2 Nos 2,050.00

minimum 2.5mm thick, with detachable cable gland

plate of 3mm thick, duly powder coated, with

earthing terminals, steel structure stand for mounting

of JB, etc. for Jointing/Termination suitable for

kV Submersible Flexible Copper Power cable with

Aluminium/ Copper armoured power cable from

MCC . Scope shall include providing suitable rating

AL busbars, Support insulators, Crimping type lugs,

nuts, bolts, washers etc. complete in all respects as

instructed by E.I.C. Drawing shall be got approved

before SITC of the same. Lugs of cables shall not be

connected directly. (Structure steel for Stand shall be

measured separately)

JB of minimum Size: 300mm x 300mm x 100mm or

higher as required. or higher as required (for Each

2.3.2 SITC of stand / wall mounting type MS Junction Box, 2 Nos 2,050.00

minimum 2.5mm thick, with detachable cable gland

plate of 3mm thick, duly powder coated, with

earthing terminals, steel structure stand for mounting

of JB, etc. for Joining/Termination suitable for 1.1 kV

Submersible Flexible Control Cables of Submersible

pump with control cable from MCC. Scope shall

include providing Terminal connectors for

connecting control cable, copper lugs, etc. complete

in all respects as instructed by E.I.C. 20%

additional/spare Terminal connector shall be

provided. Drawing shall be got approved before SITC

of the same. SMC/FRP/Bakelite separator shall be

provided between Power cable section & Control

cable section. Lugs of cables shall not be connected

directly (Structure steel for Stand shall be measured

JB of minimum Size: 300mm x 300mm x 100mm or

higher as required. or higher as required (for Each

2.4.1 LOCAL CONTROL STATION 4 Nos. 4,840.00

SITC of Pendant type ON_OFF LCS with

pushbutton set complete with Enclosure, necessary

mounting/ fixing arrangement on wall / pipe support

etc. to be installed near motors for remote operation,

etc. as per IS and specifications. (including structural

steel) (For Each Pumps)

2.4.2 SITC of Local Control Station with pendant type 10 Nos. 4,500.00

Open_Stop_Close pushbutton set and with Open,

Close, Trip & Local / Remote Indicating Lamps

complete with Enclouser, necessary mounting/ fixing

arrangement on wall / pipe support etc. to be installed

near motors for remote operation, etc. as per IS and

specifications (including structural steel)

(For 2nos. Dewatering Pump & 7 Nos. Delivery

Valve & One for Header)

3.1.1 LOW VOLTAGE (LT) CABLES 100 Mtr 954.00

Supply and unloading & delivery at site, storage &

security at site of 1.1 kV, A2XFY/2XWY XLPE

insulated (IS 7098) / PVC insulated (IS 1554) AL /

Cu conductor cables as per specification & IS. The

cable when laid outside the building shall be laid

underground in excavated trench, as per specified

method and shall be laid in prepared trench on cable

tray when laid inside the building.

3.5C x 300 sq. mm. A2XFY Cable (1 Runs for PSB

Cable Length is Approx. Provide as per Actual

Site Requirements.

3.1.2 3C x 70 sq. mm. A2XFY Cable (2 Runs for each 800 Mtr 243.00

55kW Pump Motor (or higher as per pump

manufacturer reco. )

Cable Length is Approx. Provide as per Actual

Site Requirements.

3.1.3 3C x 120 sq. mm. A2XFY Cable (2 Runs for each 75 400 Mtr 354.00

kW Pump Motor (or higher as per pump

manufacturer reco. )

Cable Length is Approx. Provide as per Actual

Site Requirements.

3.1.4 4C x 6 sq. mm. A2XFY Cable (For WR-DB with 400 Mtr 78.00

TPN MCB at Sump & Pump House, Outdoor LDB,

Indoor LDB, 2nos.PDB)

Cable Length is Approx. Provide as per Actual

Site Requirements.

3.1.5 4C x 4 sq. mm. 2XWY/2XFY Cable (Motor Heater, 500 Mtr 141.00

motor pushbutton, 2nos. Dewatering Pumps,E.O.T

Cable Length is Approx. Provide as per Actual

Site Requirements.

3.1.6 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each 500 Mtr 81.00

TPN MCB for EOT with ECH at Manual Screen &

SCF Pump, TPN MCB at PMCC room & Pump

house maintenance floor & Pump House floor, Motor

Operated Valves, Street Light)

Cable Length is Approx. Provide as per Actual

Site Requirements.

3.1.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each 400 Mtr 177.00

Motor space heate, for level switch)

Cable Length is Approx. Provide as per Actual

Site Requirements.

3.1.8 5C x 1.5 sq. mm. 2XWY/2XFY Cable (For 2 Nos. 300 Mtr 130.00

Dewatering Motor LCS )

Cable Length is Approx. Provide as per Actual

Site Requirements.

3.1.9 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For Each 600 Mtr 115.00

Motor LCS with Ameter. )

Cable Length is Approx. Provide as per Actual

Site Requirements.

3.1.10 12C x 2.5 sq.mm. 2XWY/2XFY Cable (For Actuator 300 Mtr 390.00

LCS of Each Pump and Header)

Cable Length is Approx. Provide as per Actual

Site Requirements.

3.1.11 10Tride x 1.0 sq.mm. individual triad and overall 300 Mtr 460.00

shielded with aluminum mylar tape Signal Cable for

RTD & BTD of motor (1Run Motor to Panel)

3.2.1 CABLE END TERMINATION AND 2 Nos. 1,009.00

SITC of Double compression Weather proof type Ni-

Plated brass cable glands and crimping type

Bimetalic lugs / sockets with necessary tools and

equipment’s as specified in specifications and IS.

The glands and lugs / sockets shall be suitable for

cable size and type mentioned below & as per

specifications.

1) Earthing the glands and armouring with earthing

clamp and jumper and also connecting to common

2) The job also includes, if necessary, supply & fixing

of extension busbar of same material on MCCB or

panel board terminal / connector to connect more than

one no. of parallel cables or to connect higher size

cable to lower size unit. The job also includes

earthing the glands and armour of the cable with

common earth bar or flexible copper mesh.(Cable

termination qty. shall be as per site

3.5C x 300 sq. mm. A2XFY Cable (1Runs for PSB to

3.2.2 3C x 70 sq. mm. A2XFY Cable (2 Runs for each 55 16 Nos. 294.00

kW Pump Motor (or higher as per pump

manufacturer reco. )

3.2.3 3C x 120 sq. mm. A2XFY Cable (2 Runs for each 75 8 Nos. 431.00

kW Pump Motor (or higher as per pump

manufacturer reco. )

3.2.4 4C x 6 sq. mm. A2XFY Cable (For WR-DB with 12 Nos. 111.00

TPN MCB at Sump & Pump House, Outdoor LDB,

Indoor LDB, 2 nos.PDB)

3.2.5 4C x 4 sq. mm. 2XWY/2XFY Cable (Motor Heater, 10 Nos. 111.00

motor pushbutton, 2nos. Dewatering Pumps, E.O.T

Crane, Chain Hoist)

3.2.6 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For 4 no. TPN 30 Nos. 77.00

MCB for EOT with ECH at Manual Screen, TPN

MCB at MCC Panel room & Pump house

maintenance floor & Pump House floor, MOV/MOG,

3.2.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each. 8 Nos. 75.00

Motor space heater, for level switch)

3.2.8 5C x 1.5 sq. mm. 2XWY/2XFY Cable (For 2 Nos. 4 Nos. 150.00

Dewatering Motor LCS )

3.2.9 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For Each 12 Nos. 75.00

Motor LCS with Ameter. )

3.2.10 12C x 1.5 sq.mm. 2XWY/2XFY Cable (For Actuator 14 Nos. 105.00

LCS of Each Pump and Header)

3.2.11 10Tride x 1.0 sq.mm. individual triad and overall 6 Nos. 230.00

shielded with aluminum mylar tape Signal Cable for

RTD & BTD of motor (1Run Motor to S/S Panel)

3.3.1 CABLE TRAY 200 Mtr. 456.00

SITC of GI ladder type cable trays with side channels

of size - 75 x 15 x 15 mm/ 100 x 15 x 15 mm & rungs

of size - 35 x15 x 15 mm spaced at 250 mm apart,

fabricated from 2 mm thick sheet steel in standard

length of 2.5 meter, duly hot dipped galvanized after

fabrication as per IS 2629- 1989/ IS 4759-1984

including accessories such as coupler plates/ fish

plates, bends, tees, reducers, elbows, covers and

electro- galvanized hardware etc, erected on existing

support as per specification and instruction of

engineer in charge.

300 x 100 mm - Ladder type (Cable Tray Length is

Approx. Provide as per Actual Site

3.3.2 150 x 100 mm - Ladder type (Cable Tray Length is 200 Mtr. 402.00

Approx. Provide as per Actual Site

3.4.1 Supply & laying GI perforated type cable trays 200 Mtr. 228.00

with returned edge/ flange, fabricated from 2.0 mm

thk sheet steel in the standard length of 2.5 mtrs, duly

hot dipped galvanized after fabrication as per IS

2629-1989 / IS 4759-1984 including accessories such

as coupler plates/ fish plates, bends, tees, reducers,

elbows, covers and electro-galvanized hardware etc,

erected on existing support as per specification and

instruction of engineer in charge.

100 x 35 mm x 2.0 mm thick

3.5.1 Supply, laying and erection of 120 mm approved 100 Mtr 136.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground / road

surface for enclosing cable and back filling the same

to make ground as per original.

(DWC Length is Approx. Provide as per Actual

Site Requirements.)

3.5.2 Supply, laying and erection of 90 mm approved 100 Mtr 95.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground / road

surface for enclosing cable and back filling the same

to make ground as per original. (DWC Length is

Approx. Provide as per Actual Site

3.5.3 Supply, laying and erection of 50 mm approved 100 Mtr 62.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground / road

surface for enclosing cable and back filling the same

to make ground as per original. (For Street Light).

(DWC Length is Approx. Provide as per Actual

Site Requirements.)

4.1.1 CHEMICAL EARTHING SYSTEM 8 Nos 7,025.00

SITC of chemical earthing with earthpit of minimum

bore size dia. 225mm Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS-

3043:1987 made of corrosion free G.I. Pipes having

Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising or copper coated solid steel road

/ flat strip type connection terminal 14mm dia with

constant ohmic value surrounded by highly

conductive corrosion resistant chemical compound

with high charge dissipation suitable for electrical

installation of 440V of 2Mtr. length of Pipe with one

no. 25Kg. bag of Back filling compound.

( 2 Nos for MCC Panel & Each Nos. Motor)

4.1.2 SITC of pipe type earthing having 150 cms long and 10 Nos 365.00

2.5cms dia. Galvanised iron pipe with coupling and

buch buried in specially prepared earth pit complete

with necessary 8 SWG earth wire (For EachSt. light

4.1.3 SITC of 50mm(w) x 6mm(T) etc. sizes as required, 115 Kg 77.00

HOT deep GI Strip including supply & fixing using

GI spacers, saddles when laid inside the building and

inclusive of excavation & refilling of earth when laid

outside the building & interconnection with earth pit

& all electro-mechanical equipments.

(50X6 G.I Strip wt.2.3 kg/m, 2.3x 50 mtr.=115kg.)

(PMCC Panel etc.)

4.1.4 Supply, laying and erection of 25mm(w) x 3mm(T) 120 Kg 77.00

etc. sizes as required, HOT deep GI Strip including

supply & fixing using GI spacers, saddles when laid

inside the building and inclusive of excavation &

refilling of earth when laid outside the building &

interconnection with earth pit & all electro-

mechanical equipments.

(25X3 G.I Strip, 0.6 Kg/m, 0.6x 200 mtr.=120 Kg.)

(Pump-Motor etc.)

4.1.5 SITC of HOT Dip Galvanized iron strip wire 8 SWG 31 Kg 77.00

(For LDB, PDB, LCS, etc.)

(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 300Mt.=21)

5.1.1 INTERNAL WIRING 400 Mtr 95.00

SITC of Mains & outlet points wiring with 1.1 kV

grade FRLS PVC insulated ISI marked flexible

stranded copper conductor wires with medium class

min. 25mm. dia. Rigid PVC pipe and accessories

to be erected concealed in / to be run on surface / wall

/ ceiling with following sizes as mentioned below.

The unit rate wirings shall be with connector, PVC

junction box, wires, holder, ceiling rose, angle

holder, switch, sockets, switch board, brass

chromium / cadmium plated machine screws, phase

and neutral wires, green Earth continuity wires etc. as

required to complete wiring from LDB panel to the

final outlet termination points. The wiring shall be

as per IS:732, IS:4648 and as per tender

specification / IS.

(a) SITC of Mains wiring with 3 wire 1.5 sq.mm.

5.1.2 As per Above Item SITC (b) of Mains wiring with 3 400 Mtr 124.00

wire 2.5 sq.mm.

5.1.3 As per Above Item1 (c) SITC of Mains wiring with 4 400 Mtr 114.00

wire 1.5 sq.mm.

5.1.4 As per Above Item(d) SITC of Mains wiring with 4 400 Mtr 147.00

5.2.1 SITC of Point wiring for Light / fan / Bell / 50 Nos 445.00

Primary Point with 2nos. 1.5 sq. mm & earth wire

of 1.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multistrand copper wires,

pipe to be erected concealed in flushed on wall

/ ceiling, complete with 6A Tissino Type ISI marked

flush type switch / bell push & accessories erected on

metal / PVC Box covered with 3 mm thick PC

(Polycarbonate) / Acrylic sheet with necessary

lamp holder / ceiling Rose / H. D. connector as

directed with medium class Rigid PVC pipe &

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

5.2.2 SITC of 6A independent Plug with 2nos. 1.5 sq.mm 7 Nos 310.00

Cu. Mains size wiring & earthwire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires with

medium class Rigid PVC pipe and accessories to be

erected on wall / ceiling, complete with ISI marked

/ 5 Pin socket and tissino type switch erected with

earth continuity connection erected on Metal / PVC

box covered with 3 mm thick PC(Polycarbonet) /

Acrylic sheet. ( 7 nos. for Pump House / PMCC

5.2.3 SITC of One 300/380 mm dia. Ex fan 16A 6 Nos 829.00

independent Plug point near Ex. Fan with 2nos.

sq.mm Cu. Mains size wiring & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires with

medium class Rigid PVC pipe and accessories to

be erected on wall / ceiling, complete with ISI

marked 3Pin socket and tissino type switch erected

with earth continuity connection erected on Metal /

PVC box covered with 3 mm thick PC(Polycarbonet)

/ Acrylic sheet. Plug point shall be near Ex.Fan.(For

6 nos. Pump House / LT Panel room)

5.2.4 SITC of 6/16A independent Plug with 2nos. 4 4 Nos 601.00

sq.mm Cu. Mains size wiring & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires

with medium class Rigid PVC pipe and accessories

to be erected on wall / ceiling, complete with ISI

marked 3 / 5 Pin socket and tissino type switch

erected with earth continuity connection erected on

Metal / PVC box covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet.

( For 4 nos. Pump House/ LT Room)

5.2.5 SITC of Single Phase 20A 3 Pin Matal clad 2 Nos. 845.00

Industrial Type Socket with plug top and 20A

SPMCB, suitable for flush mounting, in 16 SWG MS

box of suitable size and covered with 3 mm thick

electrical grade hylam sheet or eqivalent ISI marked