SPECIAL REPAIRS TO PRINCIPAL QTR AT PM SHRI KV NO 01 AND BLDG NO P-66 COOK HOUSE UPPER CAMP KK RANGES AND CERTAIN SANCTIONED WK (E/M) AT ACC AND S UNDER GE (N) AHILYANAGAR

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level.

M & L for moorum/Red bajri filling in floors or paving laid in layers n.exc. 15 cm thick spread leveled and rammed including watering complete all as specified and directed

M & L for hard core of gauge etc. 63 mm but n. exc. 100 mm deposited spread and leveled in layers n. exc. 15cm thick water and rammed etc. Complete all as specified and directed.

M&L for providing 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as directed.

M & L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes Complete all as specified.

M&L for 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement and no pigment, any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl leveled with plate vibrator & sweeping etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles digitally printed 300x450mm, 7-8 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

M&L for joint free / rectified anti skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile 400x400mm , as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.

M&L for joint free anti skid ceramic coloured tiles 300x300mm 7-8mm thick matching to dado tiles area of each tile, as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.

M&L for Matt finish coloured ceramic tiles 7 to 8mm thick (Squre/Rectangular) are of each Tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc, set jointed and pointed in neat cement slurry and pointed in coloured cement to match in floors complete all as specified.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

M&L for Double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

--ditto-- all as per Sr item No 13 above but as in dado/skirting on vertical surfaces over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

M&L for 15mm to 20mm thick pre-polished granite stone slab of approved shade and color Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills, jambs etc or on vertical surfaces including vertical projection, full round molding the edge including 10 mm thick backing coat in CM (1:3) jointing & pointing in white cement (1:2 ) using marble dust with admixture of pigment to match the shade of granite rubbing including dismantling etc complete all as specified and directed by Engineer-in-Charge

M&L for 30 mm thick Rough dressed(shahabad) lime stone slab flooring, laid dry, jointed and pointed in cement mortar 1:3 as in floor/plinth etc over bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 in floor/plinth etc over and incl 15 mm thick screed bed in CM 1:6,including dismantling complete all as specified and directed

Fixing only 30-40mm thick rough dressed Shahabad stone as in floor/plinth etc over and incl 15mm thick screed bed in CM 1:6 including dismantling complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick over 20 mm thick screed base in cement and sand (1:6) mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar including 15 mm thick backing coat in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick Screed bed etc complete all as specified and directed by Engineer-in-Charge

M&L for Machine cut cudappah stone slab 20-25mm thick over and including 15mm thick cement and sand screed in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L for 75mm thick plain cement concrete type C-1 (1:3:6) using 20 mm graded stone aggregate as in plinth protections & path, complete all as specified

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc.

Demolition of reinforced cement concrete of any descriptions and in any position etc complete all as specified and directed.

M&L for RCC Ready mix concrete using 20 mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and floor slab.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L Mild steel TMT bars 5mm dia and over upto 10 mm,in stirrups,spacers,binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for drilling holes upto 200 mm depth for fixing 10 mm bar and filling it properly with Dr fixit rebar grout/Dr fixit Epoxy Bonding Agent filling as per manufactures instruction company all as specified and directed by Engg-In-Charge.

Demolition of brickwork or stone bouilder masonary built in cement mortar or lime mortar complete all as specified

M&L for cutting into old masonry to form toothings for and bonding in new brick or stone work including making good in lime or cement mortar of the same mix as for new buidings.

M&L for full brick thick wall brickwork with fly ash bricks straight or curved on plan exc 6m mean radius,built in CM 1: 6 complete all as specified

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in 1: 6 complete all as specified

Taking down cement mortar plaster on brick or stone walls, raking out joints, hacking for key scrubbing down with water etc complete all as directed

M&L for rendering, 15 mm thick on brick Masonry/concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement complete all as specified.

M&L for rendering, 10 mm thick on stone/concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering, 10 mm thick on brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement including sagol finished complete all as specified.

M&L for rendering 10 mm thick in CM 1:3 by using 100% coarse sand on roof mixed with & including WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement. (WPC shall be measured and paid seprately)

Supply only water proofing compound

M&L for rendering, 15 mm thick on concrete surfaces of Chajjas top in cement mortar 1:4 finished even and fair using extra cement including scaffholding etc complete all as specified and directed.

M&L for rendering, 15 mm thick on Stone/Brick/concrete surfaces of Chajjas soffits and in cement mortar 1:4 without using extra cement including scaffholding etc complete all as specified and directed.

M&L for rendering 5mm thick on concrete surface of ceiling in CM 1:3 finished even and fair without using extra cement complete all as specified and directed.

Raking out cement mortar joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses etc complete all as directed.

M&L for Pointing to random rubble or polygonal rubble uncoursed or brought up to courses in CM 1:4 etc complete all as directed.

M & L for preparation of newly plastered surface of wall and apply two coats of OBD over a coat of primer any height including scaffholding etc complete all as directed.

M & L for preparation of new plastered surfaces of wall and applying two coats for cement based paint overv a coat of alkali resistant priming paint any height including scaffholding etc complete all as directed.

M & L for preparation of old plastered surface of wall and applying one coats of cement base paint any height including scaffholding etc complete all as directed.

M & L for preparing old plastered surfaces of walls and apply one coat of OBD, finished with roller finish on plastered surfaces of wall any height including scaffholding etc complete all as specified and directed

M&L for preparation of old plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smook soot, moulds, moss and efflorescent salt, trading oil and greasy spots and applying one coat of white lime wash at any height including scaffholding etc complete all as specified and directed by Engineer-in-charge.

--ditto-- all as per Ser item No 47 (here-in-before) but on ceiling.

M & L for preparation of newly plastered surface of wall and apply three coats of white wash any height including scaffholding etc complete all as directed.

M&L for preparation of new plastered treated surfaces of walls by brooming down and and Two or more coats of 100% Premium acrylic emulsion paint having VC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparation of old untreated plastered surfaces of walls by brooming down and and applying one coat of 100% Premium acrylic emulsion paint having VC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm.

M & L for preparation of newly plastered surface of ceiling and apply three coats of white wash any height including scaffholding etc complete all as directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling including cornices etc by brooming down or steel wire brushing scraping down smook soot, moulds, moss and efflorescent salt, trading oil and greasy spots and applying one coat of white lime wash at any height including scaffholding etc complete all as specified and directed by Engineer-in-charge.

M&L for complete removal of old distempered and painted surfaces of walls and applying two coat of Luster (any tint) over 1mm thick layer of wall care putty & a coat of suitable primer complete all as specified and directed.

M&L for 1 mm thick wall care putty etc complete all as specified and directed

M&L for 2 mm thick wall care putty etc complete all as specified and directed

Supply and fix in repairs wash hand basin vitreous China white , flat back or angle type of size 450 X 300 mm waste chain and plug and porcelain stopper , waste pipe, a pair of brackets,or errecting stand and PVC connection all as specified and directed.

S&F fix in repairs wash hand basin with pedestal vitreous China white , flat back or angle type of size 550 X 400 mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistern etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, all accessories etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device etc complete all as specified and directed by Engineer-in-charge connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-charge.

S&F in repairs, chromium plated shower rose (Square type Size 200 X 200mm) with shower arm etc complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15 mm bore steel tubing and connections

Ditto all as per Ser item No 63 above but 20 mm bore tubing

Ditto all as per item No 63 above but 25 mm bore tubing

Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified.

Ditto all as per item No 66 above but 20 mm bore tubing

Ditto all as per item No 66 above but 25 mm bore tubing

S&L of CPVC pipes SDR 11 including fittings in trenches, 20mm outer dia fixed to walls /ceiling or laid in trenches incl all necessary fittings.

--ditto-- all as per Ser item No 69 but 25mm outer dia etc

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F in repairs stop cock/ anglecock/ two waycock cast copper alloy, Chromium plated fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs stop cock/ anglecock cast copper alloy, Chromium plated fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets all as directed.

S&F in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs fancy type twin (Two way) bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.

S & F in repairs PVC flexible 32 mm Waste pipe for WHB, Sink etc complete all as specified.

S&F in Repairs Sink coupling PTMT(half or full threated), with rubber washer etc complete all as specified. Minimum weight 32mm-45Gms/40mm-60Gms

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F in repair PVC (SWR) 110mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in fixed to wall etc complete all as specifed and directed.

.-Ditto- all as per ser item No 81 above but as in trenches or floor

S&F in repair PVC (SWR) 75mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in fixed to wall etc complete all as specifed and directed.

.-Ditto- all as per ser item No 83 above but as in trenches or floor

S&F PVC (SWR) 110 mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed

S&F PVC (SWR) 75mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed

S&F PVC (SWR) junction single, (Single T) equal or un equal 110mm bore

S&F PVC (SWR) junction single, (Single T) equal or un equal 75mm bore

S&F PVC (SWR) junction single, (double Y) equal or un equal 110mm bore

S&F PVC (SWR) vent cowl110mm bore

S&F Tubes, 'medium grade' 20 MM galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

S&F Tubes, 'medium grade' 25 MM galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

S&F bands, straps, supports or stays for rain waterpipes, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts wall ties, hooks for hanging fans and similar small articles Fe-290 Gde- E-165 or Fe-310-0 complete all as specifed and directed.

M&L for cleaning of service tank up to 1000 ltrs by removing all scales, dirt, silt, mud etc from tank and mouth of outgoing pipe including washing of tank internally with bleaching powder after removing scale, dirt, silt, mud etc from tank and removing algae from outside of tank from below bottom of tank and disinfecting tank by spraying sodium hypo chloride solution in tank and writing date of cleaning on tank with synthetic enamel paint size of alphabet / numerical shall be minimum 7 cm etc complete all as specified and directed by Engineer-in-Charge. Note:- The quoted rate shall include dismantling and refixing of water tank as etc complete all as specified and directed by Engineer-in-Charge

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, triple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe, tank nipple and connected complete all as directed.

Cutting chases in brick/ block wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball and high density plastic ball screwed to iron pipe, tank nipple and connected (Minimum weight 15mm-142Gms/20mm-210Gms) complete all as directed.

S&F butt hinges medium weight cold rolled mils steel 100mm long.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long.

S&F aluminium anodised handle of extruded section 150mm long.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 300mm long.

S&F 300 mm mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed.

S & F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed in any position any type of opening with and including wooden beads complete all as directed by Engr-in-Charge.

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed in any position any type of opening with and including wooden beads complete all as directed by Engr-in-Charge.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring.

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring.

Hacking out old broken glass (any thickness size ,quality or description ) from wooden/ Steel frames glazed with putty or fixed with beads.

M & L for 3 mm thick sheet frosted/pin headed glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane.

M & L for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

M & L for preparation of old wooden surface and applying one coat of synthetic enamel paint.

M & L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide.

M & L for preparation of old steel surface and applying one coat of synthetic enamel paint over a coat of red oxide.

M&L for PCC Type C-1 1:3:6 using 20 mm graded aggregates as in edges of floor tiles/blocks roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames exc. 1.5 sq. m and n exc 4.00 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description n exc 1 Sqm each etc complete all as specified and directed by Engineer-in-Charge

S & F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc, complete all as specified,

S & F pressed steel door frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified,

S&F 35 mm thick IInd C/L H/W glazed & skeleton shutters open rebated and prepared to receive glass gauge, divided into square or rectangles with plain chamfered or rounded mitered & rebated slash bars including beads mitered for securing glass wire gauge etc all as specified

M&L for factory made 35 mm thick IInd C/L H/W plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F Solid PVC Door frame size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid PVC moulded Door shutter with particle board core, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back space, supplying and fixing in frame at site as per specification & drawing.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

Material and labour for providing water proofing treatment on roofs, as per manufecturer's instructions and as specified after taking down/out as existing at site :- (a) M&L for screed bed or bedding layer of mortar 10mm thick in CM 1:3 by using 100% course sand on roof/chajja mixed with & including M&L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement to receive water proofing treatment including taking down existing screed bed / plaster. (c) Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by thermofusion process as per manufacturers specification including applying one coat of aluminium paint. Make : Super Thermolay of STP / Equivalent in Dr Fixit, FosRoc. Note : (i) Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE. (ii) Certificate from manufacturer shall be submitted by the contractor. (iii) Including taking down of old APP Membrane.

M&L for bedding layer of Cement concrete type B-1,1:2:4 (20mm graded aggregate) of avg thickness of 50 mm on roof/ chajja and to receive water proofing treatment including taking down existing screed bed / plaster.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plug, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 x 420 mm bowl size 410 x 330 x 160mm including waste coupling, waste pipe etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 36''x 36''x 10'' with complete accessories including screws etc complete all as specified and directed by Engineer-in-Charge. Make Nirali or equivalent

S & F in repairs decorative looking mirror of size 500 mm x 700 mm without border fixed with round shape screw etc complete all as specified and directed by Engineer-in-Charge.

S & F in repairs looking mirror of size 600 mm x 450 mm etc complete all as specified and directed by Engineer-in-Charge.

S&F curtain rod 25mm dia, having corrugated PVC extrusion on eletric resistance welded MS pipe with fancy type 02 nos Knobs and 02 Nos brackets per each door/ windows etc complete all as specified and directed

S&F in repair wall mounted cloth drying stand consisting of 16 mm dia powder coated MS rods of CR steel mounted on powder coated MS square pipe, 16- 4 rods, 4ft each, total weight not less than 3.80 Kg, fixed to wall including all fittings/accessories etc complete all as specified and directed by Engineer-in-charge Make -Easy dry Model: Mount it or Equivalent product in Nirali/Prayag.

M&L for full moulding/ half moulding of stone slabs one edge, two edge, as in steps cooking platforms jambs and cills and other similar situations complete all as specified & directed.

S&F pegs set of 6 Nos, power coated alumnium body fixed with cadmium plated screws as directed.

S&F PVC (SWR) Nahani / Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent cement.

S&F Chromium plated soap dish of Prayag polymers Pvt Ltd or equivalent

Dismantling of unframed work timber scantling 40 Sq, Cm and over in section, in any position

Dismantling of fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section

M&L for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F of Steel work in tubular trusses, purlin, rafter including special shaped washer etc. complete conforming to I. S.1161-1979 grade St.-240

S&F of steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as per Fe 410 -W (Gde- E- 250) quality- A

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners. including dismantling existing sheets etc complete all as directed

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet of any colour 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners. including dismantling existing sheets etc complete all as directed

S&F for false ceiling with Vinyl faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metalized polyester foil backing with Vinyl covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturer's instructions / specification and all as directed including taking down/ out existing.

S&F 18/19mm thick colour PVC Prelaminated board fixed to timber frame work as in cup board shutter/Shelves palmet box and similar items fixed in repair complete all as specified and directed.

S&F auto closing hinges 35mm of 0 crank (KH-001) or B crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed

S&F ball bearing runners 45mm telescopic (KTS-20) full extension load capacity 50Kgs fixed in repair complete all as specified and directed

S&F stainless steel handle 100mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed

S&F Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils size 480X500X300mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed

S&F Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils size 480X500X150mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed

S&F Chromium plated stainless steel wire basket ( plate basket) pull out type for large utensils size 380X500X150mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed

S&F Chromium plated stainless steel wire basket ( cup and soucer basket) pull out type for large utensils size 380X500X100mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed

S&F Chromium plated stainless steel wire basket ( Cutlery basket) pull out type for large utensils size 380X500X100mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed

S&F (in repair) stainless steel plate rack of standard size, weight not less than 5kg, complete all as specified.

S&F in repair fancy type brass CP wall mixer (3 in 1) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-charge.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M&L for Reinforced cement concrete (design mix) M-20 using (20 MM graded aggregate) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like complete all as specified and directed by Engg-In-charge

M &L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping flat rough finishing surface of concrete) complete all as specified and directed by Engg-In-charge

M&L for Reinforced cement concrete (design mix) M-20(20 MM graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M &L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed by Engg-In-charge

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Charge.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 12 module suitble for Mylinc series of Legrand including white plates with frame upto 12 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One bell point controlled by one switch 5 Amp single pole, one way on independent board

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

--ditto-- all as per Item No 164 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F switch piano flush type single pole, one way 16 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F Socket outlet 3 Pin, 6 A etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement Socket outlet 3 Pin, 16 A etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge.

S&F bell Ding dong type elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 16 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp, 3 pin, combined two module etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Fan step regulator, 120 Watt - two module etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way TPN, 415 volts, protection class IP-42, suitable for fixing of MCBs etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way, 240 volts, protection class IP-42,Concealed in wall suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar, With Neutral bar, Earthbar and Cable ties for Cable management, Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 10KA, 'B' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, TPN, AC, 415 volts of 63 Amps capacity 10 KA, 'B' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement MCBs, SPN, AC, 240 volts of 40 Amps capacity 10 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge

S&F Decorative, wall mounting fixture, in durable plastic body & designer mesh in gold finish , suitable for 14 W retrofit CFL/LED (B-22 base) with and including lamp holders, connector block and retrofit type LED lamp 1 x 10 W (including suitable LED Lamp 9/10 W), complete with all accessories prewired and including connecting up with & including twin core, twisted flexible copper conductor cable of suitable size etc complete all as specified and directed by Engineer-in-Charge Make - Havell's Cat Part No: (GLAZE Upto 14 W Retrifit CFL (B22) LHFOECE1TZ1B014 or equivalent in make of Philips/ wipro

S&F in replacement square profile LED lighting fixture, environmental friendly, energy efficient ready to use pack Aluminium housing LED Tube light fitiing> 22 Watt with LED light source 6500 K,input voltage 140V-270V with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge Make: Smart bright batten or equvalent in Make

S&F energy saving and environmental friendly longlife LED street light 35 watt (Bldg Security light) made up of pressure die cast aluminium housing with mild power LED as lighting source with IP65 protection with GI pipe of suitable dia and all fixing accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 v, 50 Hz etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 2.5 Sqmm with 2.5 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 2.5 Sqmm cable i.e for one run for phase, one run for neutral with one run of 2.5 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m Sweep with, blades, and frame and louvers

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m Sweep with, blades, and frame and louvers

M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :- (a) LT cable 16 Sqmm, 4 core. Note : Excavation, arthwork & protection pipe etc shall be measured and paid seprately under relevent items of this Sch.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in dense soil etc complete all as specified and directed by Engineer-in-Charge

Returnig, filling in including spreading, levelling, watering and well ramming in layers, n exc 25 cm thick in soil etc complete all as specified and directed by Engineer-in-Charge

Removing exacavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and directed by Engineer-in-Charge

Supply & lay DWC pipe 50 mm bore for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement of single pointed air termination Copper rod, 12 mm dia, 300 mm long including Taking down existing copper rod complete all as specified and directed.

Supply & fix in replacement of Copper strip 25 mm x 3.15 mm Complete with saddles and fixing screws on including epoxy Insulater for Fitting the strip.including Taking down existing Al/cu strip complete all as specified and directed.(note: Rate included with Insulater)

Supply & install in replacement of GI strip 32 mm x 6 mm buried ground/floor/surface/roof with saddle and fixing screws including taking doown existing GI Strip complete all as specified and directed

M&L for earthing of poles/ system with galvanised earth plate 60x60 cm x 6 mm thick electrode of size and 32 x 6mm GI strip buried vertically in ground not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level and connected to copper strip dia by means of nuts, bolts and washers and encased in and including 40mm dia GI medium grade pipe upt 2.4 mtr height form ground level fixed by MS flat iron clamp 40mm x 5mm with nut, bolt and washers, GI strip fixed to base along pole and connected to over head line for providing earthing to HT pole/feeder AB switch LA complete with charcoal dust, salt packed around plate 150 mm thick including watering GI pipe, medium grade 20 mm dia with blanking cap 1.5 mtr long fixed to funnel with wiremesh complete with PCC chamber and RCC chamber over all as per Electrical Plate No 5 of SSR Part I - 2009 incl excavation and earth work in any type of starta and testing on compeltion etc complete all as specified and directed by Engineer-in-Charge (Note: Any length of GI strip and 40 mm dia GI medium grade pipe shall be provided as per actual requirement at site).

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex. head screw etc including Taking down existing complete all as specified and directed by Engineer-in-Charge

M/s Meher Construction (BID ID -3261080)

M/S MAHESHWARI ENTERPRISES (BID ID -3261340)

HG PATHAN CONSTRUCTION COMPANY (BID ID -3261017)

M/s. Nida Group (BID ID -3260733)

Arihant Construction (BID ID -3261141)

M/s AG PATHAN (BID ID -3260807)

AMAR CONSTRUCTION (BID ID -3260955)

OM SAI ASSOCIATES (BID ID -3261466)