Request for Proposal for Setting up of Centre of Excellence (CoE) in Textile and Apparel sector (MEGA ITI Project) at ITI-Surat and ITI-Dahod

the bid submission. 3) Filled Technical bid along with technical information

including make of all the items except GSOF

Note: If required for

verification, the

Purchaser may inspect

manufacturing facility,

either physically or

virtually, for items

covered under the

"General Shop Outfit"

category. In case any

discrepancy is found,

the OEM/ Lead Bidder

may be disqualified.

Filled Technical bid along with

technical information

including make of all the items

5 Clause 22 Minimum contractual experience of successful completion of The Bidder (or their Consortium Partners) should have successfully

Technical single/multiple equipment supplies contract/work order in completed supply contracts/work orders for Textile and Apparel and

Evaluation Textile and Apparel and allied Trade, in one of the financial allied trade equipment during any one financial year in the last five

years in last five years starting from FY: 2020-21, 2021-22, financial years, i.e., FY 2020- 21, 2021-22, 2022-23, 2023-24 and

Point No.-02 2024-25.

Contractual 2022-23, 2023-24 and 2024-25

Marks shall be awarded based on the value of the single highest

Experience A. If single work order of 1 Cr. to 1.5 Cr.(20 Marks) work order executed by the Bidder or OEM during the above period.

B. If single work order, between 1.5 Cr. To 2 Cr. (25 Marks) A. If single work order of 1 Cr. to 1.5 Cr.(20 Marks)

C. If single work order of more than 2 Cr. (30 Marks) B. If single work order, between 1.5 Cr. To 2 Cr. (25 Marks)

C. If single work order of more than 2 Cr. (30 Marks)

6 Clause 21 Duly certified Trainers on pay roll of Training Partner (TP)or Duly certified Trainers on pay roll of Training Partner (TP)/

Point-03 that of OEM. Bidder/OEM.

Training & Services A. For 5 OEM certified Trainers (10 Marks) A. For 5 OEM certified Trainers (10 Marks)

Page-22 B. For 15 OEM certified Trainers (20 Marks) B. For 15 OEM certified Trainers (20 Marks)

C. For more than 15 OEM certified Trainers (20 Marks) C. For more than 15 OEM certified Trainers (20 Marks)

7 CAD/CAM CAD/CAM Software (for training and educational purpose) in Read as: SolidWorks / Autodesk Inventor / CATIA / Pro-E or

Software network environment)., Software with latest licensed version equivalent.

(optional: Latest version of SolidWorks, Autodesk Inventor, The CAD/CAM software shall support 3D modeling and simulation

CATIA & Pro-E) including industry-specific toolsets, new and must be fully compatible with the operational requirements of

automation, and insights. Revit® BIM software helps the relevant trade machinery. Equivalent or higher specifications

architecture, engineering and construction (AEC) teams create meeting the intended application shall also be accepted.

high-quality buildings and infrastructure. Use Revit to:

Model shapes, structures and systems in 3D with Model shapes, structures and systems in 3D with

parametric accuracy, precision and ease. Streamline parametric accuracy, precision and ease. Streamline

documentation work, with instant revisions to plans,

elevations, schedules and sections as projects change. documentation work, with instant revisions to plans,

Empower multi- disciplinary teams with specialty toolsets and a elevations, schedules and sections as projects change. Empower

unified project environment. Design and annotate 2D geometry multi- disciplinary teams with specialty toolsets and a unified

and 3D models with solids, surfaces and mesh objects.

Automate tasks such as comparing drawings, replacing blocks, project environment. Design and annotate 2D geometry and 3D

counting objects, creating schedules and more. Create a models with solids, surfaces and mesh objects. Automate tasks

customized workspace to maximize productivity with add-on such as comparing drawings, replacing blocks, counting objects,

creating schedules and more. Create a customized workspace to

maximize productivity with add-on apps and APIs

8 Form:7 Revised Form-7 Manufacturers’ Authorization Form as attached

Manufacturers’ herewith in Annexure-B

Authorization Form

9 Form-10 Revised Form-10 Declartion of OEM as attached herewith in

MANUFACTURER’S Annexure-C

10 Form-14: Form-14: Historical Financial Performance (FIN 1) provided

Historical in the RFP document is hereby deleted. Accordingly,

Financial submission of this form by the bidders shall not be

required and will not be considered for evaluation.

11 Clause 28.3 General Note for Technical Specifications

Annexure III- list of  The specifications provided in the RFP shall prevail.

major machinery Bidders may offer equipment/machines with

(GSOF) to be specifications equal to or superior to those specified in

supplied/installed. the RFP, which shall also be considered acceptable

We kindly request all prospective bidders to take note of these amendments and incorporate them into their proposals. These changes aim to provide

clarification, rectify any errors, or enhance the understanding of the requirements stated in the original tender document. All other terms and conditions

mentioned in the original tender document remain unchanged. We expect all interested bidders to review the amended documents and submit their

revised proposals accordingly. The revised proposals should reflect the changes specified in this corrigendum notification. If there are any questions or

concerns regarding these amendments, please do not hesitate to contact us at [email protected]