PROVISION OF ACCOMMODATION FOR COAST GUARD OFFICERS MESS AT ICGS KAKINADA

Amount

Schedule "A" Part – I to Schedule "A" Part – XII: NOTE: Schedule "A" Part – I to Part – XII are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only. Sch of Credit is also prepriced by MES and the amount is reflected at Srl Page No 74(A).

Lump Sum price worked out by the contractor for "BUILDINGS & STRUCTURES", for the lumpsum price of Rs. 3,25,00,000.00 inserted by MES as listed in Schedule 'A' Part - I on Serial Page No. 31(R)

Price worked out by the contractor for "PILE FOUNDATION", against the price of Rs. 1,75,96,486.60 inserted by MES as listed in Schedule 'A' Part - II on Serial Page No. 32(R)

Price worked out by the contractor for "SITE CLEARANCE, EARTHWORK AND EXCAVATION", against the price of Rs. 2,23,693.90 inserted by MES as listed in Schedule 'A' Part - III on Serial Page No. 33(R)

Price worked out by the contractor for "INTERNAL WATER SUPPLY AND SOLAR WATER HEATER", against the price of Rs. 2,84,751.00 inserted by MES as listed in Schedule 'A' Part - IV on Serial Page No. 35(R)

Price worked out by the contractor for "INTERNAL ELECTRIFICATION", against the price of Rs. 1,22,036.50 inserted by MES as listed in Schedule 'A' Part - V on Serial Page No. 36(R) .

Price worked out by the contractor for "SEWAGE DISPOSAL", against the price of Rs. 2,13,183.28 inserted by MES as listed in Schedule 'A' Part - VI on Serial Page No. 39(R)

Price worked out by the contractor for "AREA DRAINAGE", against the price of Rs. 2,78,681.80 inserted by MES as listed in Schedule 'A' Part - VII on Serial Page No. 40(R)

Price worked out by the contractor for "ROAD, PATH & CULVERT", against the price of Rs. 6,17,627.10 inserted by MES as listed in Schedule 'A' Part - VIII on Serial Page No. 44(R)

Price worked out by the contractor for "EXTERNAL WATER SUPPLY", against the price of Rs. 2,88,730.00 inserted by MES as listed in Schedule 'A' Part - IX on Serial Page No. 45(R)

Price worked out by the contractor for "EXTERNAL ELECTRIFICATION" against the price of Rs. 40,847.00 inserted by MES as listed in Schedule 'A' Part - X on Serial Page No. 46(R)

Price worked out by the contractor for "ENTRANCE GATE" for the lumpsum price of Rs. 1,19,871.35 inserted by MES as listed in Schedule 'A' Part - XI on Serial Page No. 48(R)

Price worked out by the contractor for "DEMOLITION", for the lumpsum price of Rs. 4,144.45 inserted by MES as listed in Schedule 'A' Part -XII on Serial Page No. 49(R)

Schedule "A" Part - XIII: [Miscellaneous Items]

INTERNAL ELECTRIFICATION

Item No 1 : M & L for point wiring complete with PVC insulated and unsheathed cable 1.5 sq mm (nominal area) multi stranded copper conductor single core Conforming to IS : 694 including medium duty concealed unplasticised PVC conduit conforming to IS : 9537 ( Part-3) and ISI marked not less than 20 mm dia with concealed in wall anodised pressed steel terminal boxes as per manufacturer's design of reqd. size (factory made) with grid plate, crown or cover plate made of polycarbonate of required colour complete with all accessories and all as specified including PVC insulated and unsheathed cable1.5 sqmm (nominal area) stranded copper conductor single core Conforming to IS : 694 of green colour as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete for following :-

(a) One light /fan/exhaust fan point controlled by one switch

(b) One 5 Amp socket outlet point on an independent board.

(c) One light point controlled by two switch single pole two way

(d) One bell/buzzer point on same board

Item No 2 : M&L for point wiring complete for one socket outlet 15 amps on an independent board with PVC insulated and unsheathed cable 4 sq mm (nominal area) stranded copper conductor single core conforming to IS : 694 including medium duty concealed unplasticised PVC conduit conforming to IS : 9537 ( Part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel anodised terminal boxes not less than 2 mm thick of reqd. size (factory made) with grid plate, crown or cover plate made of polycarbonate of required colour, complete with all accessories and all as specified including PVC insulated and unsheathed cable 2.5 sqmm (nominal area) stranded copper conductor single core conforming to IS : 694 of green colour as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete and controlled by one 15 Amp switch.

Item No 3 : M & L Modular White cover plate with frame, 1 module complete all as specified and as directed.

Item No 4 : M & L Modular White cover plate with frame, 3 module complete all as specified and as directed.

Item No 5 : M & L Modular White cover plate with frame, 6 module complete all as specified and as directed.

Item No 6 : M & L Modular White cover plate with frame, 8 module complete all as specified and as directed.

Item No 7 : M & L Modular White cover plate with frame, 10 module complete all as specified and as directed.

Item No 8 : M & L Modular White cover plate with frame, 12 module complete all as specified and as directed.

Item No 9 : M & L for Sub main wiring with 2 runs of 4 Sqmm PVC insulated HRFRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 2.5 Sq.mm HRFRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 4 Sq.mm. cable, one run of 2.5 Sq.mm cable and one run of PVC conduit will be measured as one unit.

Item No 10 : M & L for Sub main wiring with 2 runs of 6 Sqmm PVC insulated HRFRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 4.0 Sq.mm HRFRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 6 Sq.mm. cable, one run of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit.

Item No 11 : S & F Sheet metal Enclosure double door type, vertical type, TPN, 4 way, 415V with 200 Amp rated aluminium bus bar, including MCCB 100 Amp as incoming and slots for outgoing MCB SP/TP (to be measured and paid seperately under relevant items) and fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables /wires all as specified and as directed.

Item No 12 : Supply and Fixing the modular type stepped fan regulator and connecting all as specified

Item No 13 : S& F Ceiling fan 1200 mm sweep, single phase 230V, 50 Hz, BEE 5 star rated, down rod complete all as specified and as directed.

Item No 14 : Supply and fixing Fresh Air fan of 250 mm sweep single phase 230 V AC, 900 RPM, light duty with louvered shutters made of PVC and connecting the fan to ceiling rose including provn of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection complete all as specified and as directed.

Item No 15 : S&F LED Wall / Surface mounted Batton and tube rod integrated channel CRCA body, powder coated white regal batten type luminaire pre-wired for T8 LED tube light. 1x18W LED T8 6000K complete all as specified and as directed. Make Bajaj :- Batton CAT No:- BLRB-DB 118 W, TUBE ROD BLRB 18 W CWC / Philips CAT No BN108CLED 20 S PSU CDL WH or equivalent as approved by AGE(I) from the list of makes included in the tender.

Item No 16 : S&F LED recessed mounted, 10Watts, down lighter with the option for dimming solution complete all as specified and as directed. Make : Philips Cat no. DN 392B LED10S-6500 PSUWH or equivalent as approved by AGE(I) from the list of makes included in the tender.

Item No 17 : S&F LED energy efficient luminaire suitable for 2x2 grid ceiling, 38watts, white colour with profiled and flat diffuser complete all as specified and as directed. Make : Philips cat no. SM 365C LED38-6500 PSU-ODWH or equivalent as approved by AGE(I) from the list of makes included in the tender.

Item No 18 : S & F LED Mirror Light "Linnet" 14 Watts complete all as specified and as directed. Make : Crompton Greaves Cat Part No LCL-14-CDL or equivalent as approved by AGE(I) from the list of makes included in the tender.

Item No 19 : S& F LED Security Light , 20 Watts, compact body, highly efficient lighting, IP66 protection complete all as specified and as directed. Make Philips Cat no BRP022 LED 20 CW MR S1 PSU GR or equivalent as approved by AGE(I) from the list of makes included in the tender.

Item No 20 : S&F bracket for security light fittings made out of 40 mm dia medium grade GI tubing 1.5 m long bent to shape complete all as specified and directed.

Item No 21 : S& F porch light, recess / surface mounted LED luminaire , with higher efficacy, full diffuser providing uniform light, 36Watts complete all as specified and as directed. Make Wipro Cat no CRCO10R038HP57GL1 or equivalent as approved by AGE(I) from the list of makes included in the tender.

Item No 22 : S & F LED Post Top lantern 35 Watt complete with fixing arrangement all as directed. Make Havells CAT Part No RUBYPT35WLED757PSYMTOPC or equivalent as approved by AGE(I) from the list of makes included in the tender.

Item No 23 : S & F MCB SPN 32 Amps 240 Volts 'C curve', complete all as specified and as directed.

Item No 24 : S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240V, complete all as specified and directed.

Item No 25 : Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.

EXTERNAL ELECTRIFICATION

Item No 26 : Supplying and laying reinforced precast concrete cable cover, class LV, Type I, flat, size 250 mm x 150mm x 40mm in trenches for cable protection, complete all as specified and as directed.

Item No 27 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 95 sqmm cross-sectional area, provided wth cable glands where equired, sticker inicating direction of current flow, connected and end locations at every 3 meter complete all as specified and as directed. (For Officer's Mess)

Item No 28 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 25 sqmm cross-sectional area, provided wth cable glands where equired, sticker inicating direction of current flow, connected and end locations at every 3 meter complete all as specified and as directed. (For LT panel to TPN DBs)

Item No 29 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 4 core, 16 sqmm cross-sectional area, provided wth cable glands where equired, sticker inicating direction of current flow, connected and end locations at every 3 meter complete all as specified and as directed. (for Street Lights and fountain)

Item No 30 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 2 core, 10 sqmm cross-sectional area, provided wth cable glands where equired, sticker inicating direction of current flow, connected and end locations at every 3 meter complete all as specified and as directed. (for fountain Lights and Pump connections)

Item No 31 : M&L for horizontal Boring of holes 60 cm deep, under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine for passing of LT cable in GI pipe all as specified and directed. Note:- GI pipe will be measured and paid seperately in relevant item.

Item No 32 : S & F MCCB 100 Amp, 4 Pole, 415V, 25 KA breaking capacity all as specified and directed .

Item No 33 : Loop in Loop out FRP thermoplastic circuit breaker boxes IP 65 with metric knockouts for cable entry of size 1 row 4 module, along with MCB SP 4 A and combi climate glands IP 66/IP67, terminals as bus terminals for cable with necessary fixing arrangemets with back supports etc complete all as specified and as directed.

Item No 34 : Supply and install fresh water pump set of 0.5 HP single phase 230 volts IP-54 protection high grade pump casting with Stainless Steel shaft (SS-410) for circulating the water in the fountain, including its foundation arrangement, electrical and water connection all as specified and directed. Make:- Crompton/Jyoti/Havells

Item No 35 : Supply and fix LED Flood Light of 30 Watt with high pressure die cast housing acting as heat sink in order to ensure better performance of the luminaires for area lighting in front of CGOM complete all as specified and as directed. Make: Bajaj, CAT Part No BJFL 30W LED or equivalent as approved by AGE(I) from the list of makes included in the tender.

Item No 36 : Supply, fabricate, install, testing and commissioning of LT Panel board confirming to CPRI approved manufacturer made out of CRCA sheet 2.00 mm thick double door, Indoor cubicle type totally enclosed with front and rear opening, 40x40x5mm thick angle iron frame work, hinged doors with projected on raised PCC platform with PCC 1:2:4 type B1 (20mm graded aggregate) of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, nuts/ bolts used to be made of rust proof material as per IS: 8623, with Aluminium bus bar of TPN 400 Amps rating , insulators suitable for three phase LT AC, 50 Hz 415 V 4 wire, complete with powder coating, necessary internal electric wiring / connection with FRLS cables not less than 2.5sqmm , necessary sleeves IP45 class protection, as required and provision of the following : a) FOR INCOMING i) MCCB 200 Amp, 4 Pole, 36 KA, 415 Volts - 01 Nos b) FOR OUT GOING i) MCCB Cap 100 Amps, FP 415 Volts breaking capacity 25 KA - 01 Nos ii) MCCB Cap 63 Amps, FP 415 Volts breaking capacity 16 KA - 04Nos. iii) MCB Cap 40 Amps, TPN 415 Volts breaking capacity 10 KA - 02 Nos. iv) Digital ammeter 0-200 Amp 96 mm -01 Nos v) Digital Voltmeter 0-500 Volts -01 Nos vi) LED Indicating Lamps for each phase with colour code Red Yellow Blue for R, Y and B Phases - 01 [set of three]

Item No 36A : Under Water Luminaire with reflector for 75 W lamp without transformer, floor mounted gun metal housing with clear toughened glass fixed in a gun metal frame with all the necessary tight seal material fixed to the Fountain. Make: Philips Model: NHG010 1xNR95-150W-FR or equivalent as approved by AGE(I) from the list of makes included in the tender.

Item No 36B : Supply and fix gate top lights of 25 Watt LED post integral pole mounted decorative type with IP 65 protection complete all as specified and as directed. Make: Bajaj, Model: BLPTSP 25W WH LED or equivalent as approved by AGE(I) from the list of makes included in the tender.

COOLING APPLIANCES

Item No 37 : Supply, installation, testing and commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage capacity of 80 litre and nominal cooling capacity of 40 Litre per hour complete all as specified and directed. .

Item No 38 : Supply and install Deep freezer hard top, of 320 litre capacity having single door Single Phase 230 Volts 50 Hz all as specified and directed .

Item No 39 : Supply and install refrigerators, electric driven (single phase), capacity not less than 250 litres, 5 star rating, complete all as specified and directed. .

Item No 40 : Supply and install Voltage Stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of +/- 2.5% and of capacity 2.0kVA.

SOLAR WATER HEATER

Item No 41 : Supply, install, testing and commissioning of solar hot water system (flat plate collector ) based on indirect transfer of heat capacity of 200 LPD with electrical heating back up 2 KW complete all as specified and directed.

Item No 42 :Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 250 litre three layer, all as specified and directed.

Item No 43 : Hot water pipe duly insulated with rockwool 50mm thick of density 48kg/cum and aluminium cladding with 26 SWG Al sheet for 20 mm bore including all fittings/fixtures all as specified and directed.

Item No 44 : Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint all as specified and directed .

FIRE FIGHTING SYSTEMS

Item No 45 : Supplying, laying, connecting, testing and commissioning of 100mm dia MS ERW pipes with wall thickness 6mm, including all specials as per IS, class B jointing materials, duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer and complete all as specified and directed. ( Down comer at each stair case)

Item No 46 : Supplying, laying, connecting, testing and commissioning of 80mm dia MS ERW pipes with wall thickness 6mm, including all specials as per IS, class B jointing materials, duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer and complete all as specified and directed. ( For Branch Connections)

Item No 47 : Supplying, laying, connecting, testing and commissioning Cast iron hand operated Butterfly Valve 100mm dia class 1.6 PN flanged type drilled ends any pattern including jointing materials complete with rubber gasket, bolts and nuts etc. complete all as specified and directed.

Item No 48 : Supplying, laying, connecting, testing and commissioning of Cast Iron Non Return Valve (NRV) 100 mm dia class PN-1.6 including all jointing materials with Rubber gasket, Nuts and bolts etc complete all as specified and directed.

Item No 49 : Supplying and fixing fire fighting non percolating delivery hose 63mm dia 2x15 meter long IS:636 marked complete with hose coupling instantaneous type gun metal 63mm dia heavy duty pair of male-female coupling on each side of hose pipe complete with branch pipe short, gunmetal 63mm dia instantaneous inlet valve, threaded outlet/inlet fitted with 12.5mm bore gunmetal nozzle beaing IS 902 complete all as specified and directed.

Item No 50 : Supply and fix hose reel of 20 mm size of 30 meter length confirming to IS 5132 including hose reel drum with one SS nozzle of 15 mm dia. With check valve complete all as specified and as directed.

Item No 51 : Supply and fix double headed outlet fire hydrant landing valve of type 'B' 63 mm dia of size confirmeing to IS:5290 complete all as specified and as directed.

Item No 52 : Supply and fix Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet, painted fire red out side and brilliant white fixed to wall and suitable for fixing hose reel 30 m long all as specified and as directed.

Item No 53 : Supply, installing,connecting, commissioning and testing of Booster pumps for 440 V, 3 Phase, 50 Hz Confirming to IS- 12469 :1988 With CI Casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50 Hz, 30 m head, 900 LPM discharge , minimum pressure 2.0 kg/square cm, of 15 HP capacity 100x100mm suction and discharge etc complete all as specified and as directed

Item No 54 : Supplying, laying, connecting, testing and commissioning of Cast Iron Air Release valve with single air outlet, 50 mm dia bore and fixing up in ERW water supply mains 50 mm dia including jointing materials with rubber gasket, bolts and nuts etc complete all as specified and directed.

Item No 55 : Supplying, laying, connecting, testing and commissioning of Cast Iron Air Release valve with two air outlets, 25 mm dia bore and fixing up in ERW water supply mains 100 mm dia including jointing materials with rubber gasket, bolts and nuts etc complete all as specified and directed.

Item No 56 : Supply, install and commissioning analogue addressable type Fire alarm control panel along with network interface card and with Lead acid battery back up for 08 hours normal operation and 15 minutes alarm operation. (The control panel, battery charger, etc shall be UL listed) Complying with BS EN 54 Single loop panel with 99 detectors & 99 modules & upto 200 detectors and modules (per each loop) complete all as specified and as directed.(Main control panel and repeater panel)

Item No 57 : Supply and fix fire brigade inlet, built in Gun metal, inlet connection(suction head) of 4 way with 4 Nos 63mm dia instantaneous type male coupling, built in check valves and 100mm sluice valve (1 No 100mm dia non return valves) and 100mm dia flanged outlet complete with all accessories and connected complete all as specified and as directed.

Item No 58 : Supply and fix electric motor siren horizontal two stage continuous normal operation for at least 50 minutes confirming to IS 1941 suitable for 3 phase 415 V, supply with motor not exceeding 3.75 kW power and able to deilver 65 dB to 120 dB noise level at 1.5 m with sound output Variation of +5 dB 1000m range including necessary contacts sytem to connect to Fire alarm panel. Siren will have an automatic equipment for producing a varbling note.

Item No 59 : Supply and fix electric motor siren horizontal two stage continuous normal operation for at least 50 minutes confirming to IS 1941 suitable for 3 phase 415 V, supply with motor not exceeding 3.75 kW power and able to deilver 65 dB to 120 dB noise level at 1.5 m with sound output Variation of +5 dB 500m range including necessary contacts sytem to connect to Fire alarm panel. Siren will have an automatic equipment for producing a varbling note.

Item No 60 : Supply & Fixing DOL stater 3 Ph suitable for 5 to 7.5 HP motor for siren complete all as directed.

Item No 61 : Supplying & laying PVC insulated, unarmoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, cross-sectional area 25 sq. mm, connected from LT panel to Motor terminals including copper thimble as per requirement, complete all as specified and as directed.

Item No 62 : Supplying & laying PVC insulated, unarmoured heavy duty electric cable with stranded copper conductor, 1100 volts grade, 2 core, cross-sectional area 4 sq. mm, connected from LT panel to Motor terminals including copper thimble as per requirement, complete all as specified and as directed.

Item No 63 : Supply and fix fire extinguisher dry chemical powder (ABC) type, 6 Kg capacity as per BIS, with necessary fixing accessories etc complete all as specified and directed.

Item No 64 :Supply and fix fire extinguisher CO2 type 4.5 Kg capacity as per BIS, with necessary accessories etc complete all as specified and directed.

Item No 65 : Supply and install addressable single action manual call point, diecast aluminium round type, having an integrally mounted addressable module that monitors and reports contact status and resettable type/break glass switches with LED indication, complete all as specified and as directed.

LIFTS

(A) TECHNICAL SPECIFICATION

(a) Type & capacity : Passenger elevator for 8 persons (544 Kg)

(b) Type of drive : Variable voltage and variable frequency drive with microprocessor based controller ± 5 mm landing accuracy with speed encoder.

(c) Speed : 1.50 meter per second

(d) Travel : Suitable for passenger travel of . Ground floor, 1st floor, 2nd floor, 3rd floor & 4th floor (Five floors, five stops, five level and for opening on same side.)

(e) Required well size : Minimum 1850mm x 1650mm deep (over plaster) (Approx) without any projected beam/column.

(f) Power supply : 415/440 volts, three phase 50Hz AC.

(g) Inner size : Minimum 1100mm x 1300mm deep (Approx)

(h) Car enclosure : Stainless steel panel, SS false ceiling (hairline finish) and mirror finish Handrail.

(j) Flooring : Polished granite flooring 18 20mm thick.

(k) Electric light : LED light fitting.

(l) Fan : Pressure fan 400 mm sweep – 01 No.

(m) Car entrance : Automatic, centre opening, sliding doors

(n) Clear opening : Minimum 800mm x 2000mm high.

(o) Operation door : Automatic operation

(p) Control : Simplex full collective with and without attendant.

(q) Indicators : Hall position indicators for car & landing. Direction and position indicator with stainless steel fixtures at all floors.

(B) STANDARD FEATURES

(i) Anti nuisance car call protection

(ii) Automatic car return device (home landing)

(iii) Independent service (for duplex only)

(iv) Overloading Device.

(v) Nudging

(vi) Emergency fireman’s service

(vii) Audible Car Call button

(viii) Emergency Car light unit

(ix) High performance contact free infrared curtain door protection

(x) Door time protection

(xi) Emergency alarm Button

(xii) Extra door time of lobby & parking

(xiii) Door open close button

(xiv) Manual rescue operation

(xv) Belt inspection device.

(C) ADDITIONAL FEATURES

(a) Automatic rescue device (ARD)

(D) HUMAN INTERFACE DEVICE (HID)

(i) Hall button with micro stroke push buttons combined with 16 – segment digital LED display position indicator.

(ii) Full height car operating panel with micro stroke call push buttons (located on side panel)

(iii) Door open/ door closed on car operating panel.

(iv) 2-way intercommunication system

(v) Dot matrix position indicator

(vi) Battery operated Alarm bell & emergency light.

(vii) Fireman’s switch at main lobby

(viii) Manual rescue operation

(ix) Call register indicator in all landings

(x) Attendent operation system in car panel

MISCELLANEOUS ITEMS (PILE)

Item No 67 : Boring for Bored cast in situ 450 mm dia piles in soft soil/Clay/soft rock and getting out and disposal of spoil outside MD land, using DMC method (Direct mud circulation) all as specified and directed by Engineer- in - Charge.

Item No 68 : Boring for Bored cast in situ 600 mm dia piles in soft soil/Clay/soft rock and getting out and disposal of spoil outside MD land, using DMC method (Direct mud circulation) all as specified and directed by Engineer- in - Charge.

Item No 69 : Chipping out pile upto cut off level including initial load disposal upto a distance of 50M all as specified and directed.

Item No 70 : Carrying out following initial load testing on 450mm dia piles complete all as per IS and as directed including necessary anchoring and support piles of suitable load/size to be casted as required (Quoted rates are inclusive of all these requirements).

(a) Compression test

(b) Pull out test

(c) Lateral test

Item No 71 : Carrying out following initial load testing on 600mm dia piles complete all as per IS and as directed including necessary anchoring and support piles of suitable load/size to be casted as required (Quoted rates are inclusive of all these requirements).

(a) Compression test

(b) Pull out test

(c) Lateral test

Item No 72 : Carrying out following routine load testing on 450mm dia piles complete all as per IS and as directed including necessary anchoring and support piles of suitable load/size to be casted as required (Quoted rates are inclusive of all these requirements).

(a) Compression test

(b) Pull out test

(c) Lateral test

Item No 73 : Carrying out following routine load testing on 600mm dia piles complete all as per IS and as directed including necessary anchoring and support piles of suitable load/size to be casted as required (Quoted rates are inclusive of all these requirements).

(a) Compression test

(b) Pull out test

(c) Lateral test

Item No 74 : Carrying out Pile Integrity Test on following dia piles all as per IS and as directed.

(a) 450 mm dia

(b) 600 mm dia

ENTRANCE GATE

Item No 75 : S & F stainless steel letters project type of size 30cm(12") ht each fixed with anchor fasteners.

Item No 76 : S & F stainless steel letters, project type of size 20cm (8") each fixed with anchor fasteners complete all as specified and as directed.

Item No 77 : S & F stainless steel Emblem of size 750 mm dia fixed with anchor fasteners complete all as specified and as directed.

Item No 78 : Ornamental MS Gate 5.5x3.6m with Wicket Gate of 1.2x2.10 m all as directed.

EXTERNAL WATER SUPPLY

Item No 79 : Construction of brick masonry valve chamber 900 x 900 x 900 (inner dimensions) for valve including excavation and earth work in any type of soil and 100 mm thick PCC 1:4:8 type D2 foundation(using 40 mm graded crushed stone aggregate, 250 mm thick brick work in CM (1:6) plastring internal surface 15 mm tick in CM (1:4) PCC (1:3:6) type C1 coping 50 x50x6 mm angle iron & 6 mm thick MS plate cover complete with locking arrangement and painting steel and iron surface with two coat of synthetic enamel paint over a coat of zinc chrome primer all as specified all as directed.

Item No 80 : Cutting existing cast iron pipes/ GI pipes of any size and reducing to required length before laying and insertion of 'T's and branches for 100 mm all as specified and as directed.

Venkateswara Electricals

M/s. P S REDDY

SIDHVI INFRASTRUCTURE PROJECTS LIMITED