Flood Protection measures at Masimpur Military Station, Package 2.

Medium Jungles: Clearing medium jungles and trees up to 15 cm. girth including cutting, uprooting roots and stumps, removing them from the site of the work, etc. complete as directed. (When 30% to 60 % of the area is covered by shrubs, trees etc.)

Cutting bamboo, uprooting roots & stumps including removing them from the site of work, etc. complete as directed.

Earth work in embankment by Mechanical means by truck carriage with locally available ordinary/normal soil excluding sandy and rocky soil free from roots & vegetation and filling in uniform layers not exceeding 25 cm thick including ploughing or roughening or benching the seats, removing all debries, breaking clods up to 4cm cube, dressing as per design section and compaction in layers not exceeding 30 cm in thickness and core cutter soil test at every layer and every 500m distance, etc. complete as directed. Compaction with three wheel static roller of 80-100 kN capacity For initial Lead upto 1.00 km for all lifts. For beyond initial 1 km & upto 10.00 km & for all lifts. For a lead upto 9.5 Km.

Earth work in filling by mechanical means by deploying hydraulic excavator and trippers etc. including ramming with locally available ordinary soil excluding rocky soil with all lead and lift, transporting to site, spreading, dressing as per design section including ploughing or roughening or benching the seats, removing all debris, breaking clods up to 2.5 cm cube, etc. complete as directed. (12.5 % deduction will be made from the section measured quantities of the completed and compacted earth work on account of shrinkage) For initial lead up to 1 Km and for all lifts For every Km extra lead beyond initial lead of 1 Km & up to 10 Km. For a lead upto 9.5 Km.

Turfing with grass sods of largest possible rectangles of 12cm. minimum thickness placed closely including dressingearth pegging with Jati bamboo split, watering till the grass grows for a lead up to 90m and all lifts, etc. complete as directed.

Supply of Geo TextileTube(Mega containers) with minimum properties as mentioned bellow. Polymer = PP of 400 GSM or above Tube Circumference = 10M + 5% Fill port (diameter ) =30 to 45 CM Tensile Strength (MD) ≥ 100 kN/m Tensile Strength (CD) ≥ 100 kN/m Elongation - MD ≤ 25% AOS ≤ 0.180 mm Permittivity ≥ 0.40 S-1 Length=25M

Filling Geo tubes (25m long and 10m circumference) with sand of volume 176 cum by using mud pump not below the fill height of 1.60m as per drawing and technical specification, binding the tube with 9mm nylon rope to jati bamboo pegs of length 2m placed 5m c/c along both sides of the tube and to keep the tube in posting during filling, as specified and directed including al loading, unloading and handling charges and local carriage upto a distance of 250M, pumping slurry using mudpump from a distance upto 500 m etc.including setting up of the tube laying platform, complete as directed.

Collection of sand gravel from approved quarry containing 60% sand and 40% gravel free from disintegrated and flaky pieces of vegetation and other deleterious matters, adherent coating etc. including stacking in suitable stacks at quarry site etc. complete as directed.

Labour charge for laying of soling stone, brick bats, broken stone metal, sand gravel etc. on approach road including ramming dressing the seat and local carriage of materials up to a distance of 60 m complete as directed.

Supply of G-Mat in double layered composite Geo-textile fabricated to form a three dimensional mattresses, the upper layer of the mattress being heavily woven with polypropylene fabric needle punched with a mixture of U.V. stabilized green fibres and cut tape yarns with Upper Layer Properties as i. Mass per unit area > 650 GSM, ii. Tensile Strength (MD) ≥ 70kN/m, iii. Tensile Strength (CD) ≥ 70kN/m, iv. Tensile Elongation (MD) ≤ 25%, v. Tensile Elongation (CD) ≤ 25%, vi. Pore Size < 0.35 mm, vii. Abrasion Resistance ≥ 35 %, viii. UV @ 500 hours ≥ 90%, ix. Resistance to Oxidation @ 100°C for 28 days) ≥ 80% and Lower Layer Properties as i. Mass per unit area > 400 GSM, ii. Tensile Strength (MD) ≥ 110kN/m, iii. Tensile Strength (CD) ≥ 90kN/m, iv. Tensile Elongation (MD) ≤ 25%, v. Tensile Elongation (CD) ≤ 25%, vi. Pore Size < 0.35mm, vii. Abrasion Resistance ≥ 60 %, viii. UV @ 500 hours ≥ 90%, ix. Resistance to Oxidation @ 100°C for 28 days) ≥ 80% The sewing thread should be of high tenacity polyester and parallel stitches are to be continued positioned at 350 mm apart with a stitch length not exceeding 5 mm. (Each roll of G-Mat should be supplied in properly packed bundle and should be marked with the Name of Manufacturer & Batch Number & its dimensions clearly on each roll with “WRD Govt. of ASSAM” to be printed on it and mentioning properly the GSM (for both upper and lower layer) and types of polymer (for both upper and lower layer) and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material) (Without Custom Duty)

Carriage of Geo Mat of including loading & unloading, stacking cost of P.O.L., etc. complete and including hire charge of truck with driver and handyman, etc. completed as directed. (Distance to be calculated from Divisional Store) Distance=15 KM

Labour charge for laying, fitting and fixing of double layered Geo textile, fabricated to form a three dimensional mattresses after filling sand at design slope, filled up with sand by pump, anchoring by cutting/ at already excavated trench at the upper and lower end of slope of depth 1.00 m × 0.75 m placing the mat by bending it into the trench, filling the trench by earth filled cement bags/ sand / silt filled type - A geobags, sides of mattresses in sloping direction stitched by Polypropylene thread with double locking chain stitch not less than 3 stitches per 2.50 cm to achieve minimum stream strength including all handling and carriage charge complete as directed. (Polypropylene thread will be supplied by the department free of cost)

Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653:2017  Wide Tensile strength (MD) ≥ 15kN/m & Wide Tensile strength (CD) ≥ 15kN/m  Elongation (MD) ≥ 50% & Elongation (CD) ≥ 50%  Abrasion ≥ 95%  Trapezoidal Tear Strength (MD) ≥ 340 N & Trapezoidal Tear Strength (CD) ≥ 340 N  CBR Puncture strength ≥ 3000 N  Permittivity ≥ 1.25 s-1  Permeability ≥ 60l/m2/sec  AOS ≤ 75micron  UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80%  Mass ≥ 300gm/m²  Thickness at 2KPa ≥ 3 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer, Batch Number & its dimensions clearly on each roll with “WRD Govt. of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).

Carriage of 300 gsm Geo sheet of including loading & unloading, stacking cost of P.O.L. etc. complete and including hire charge of truck with driver and handyman, etc. completed as directed. (Distance to be calculated from Divisional Store) Distance=15 KM

Labour charge for laying Geo fabric sheet as filter bellow pitching including carrying, lapping, wrapping & stitching as directed by the Engineer-in-Charge.

Supply of Geo-textile bags of type-A (size 1.03X0.70M), inner to inner made of Geo-textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653:2017 i. Wide Tensile strength (MD) ≥ 20KN/m & Wide Tensile strength(CD) ≥20 KN/m ii. Elongation (MD) ≥50% & Elongation (CD) ≥ 50% iii. Abrasion ≥ 95% iv. Trapezoidal Tear Strength (MD) ≥ 450N & Trapezoidal Tear Strength (CD) ≥ 450N v. CBR Puncture strength ≥ 4000N vi. Permittivity ≥ 1.10s – 1 vii. Permeability ≥ 40l/m2/sec viii. AOS ≤ 75 micron ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% x. Mass ≥ 400 gm/m² xi. Thickness at 2KPa ≥ 3 mm xii. Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO (Certified Laboratory should invariably be submitted against each batch of material)

Carriage of Geo Bag of size 1.03X0.70 m including loading and unloading, stacking, etc. complete and including hire charge of truck with driver and handyman,cost of POL etc. complete as directed. Distance 15 Km

Supply of Rope Polypropylene (PP) Gabion of size 2 m × 2 m × 0.45 m having the following properties i. Mesh opening size 150 mm ×

150 mm ii. Rope Diameter of 9.0 mm iii. Linear Density of rope ≥ 65.1 gm/m iv. Tensile Strength ≥ 1900 Kg v. Abrasion Resistance of rope after 1000 cycles ≥ 65% vi. CBR Puncture Strength ≥ 7000 Kg.;

Carriage of Gabion box of size 2.0 m × 2.0 m × 0.45 m including loading & unloading, cost of P.O.L. etc. complete and including hire charge of truck with driver and handyman, etc. completed as directed. Distance from Division store to site is =15 KM

Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon) .

Filling and laying of polypropylene gabion boxes 2.0 m × 2.0 m × 0.45 m filled with sand filled Geo bags of size 1.03 m × 0.70 m excluding excavation of sand/silt from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand weighing 126.00 Kg after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100 or part as directed carrying the same to the dumping site including all handling charges and local carriage within a distance of 150 m and laying properly. (Geo Bag, gabion box and Polypropylene thread will be supplied by the department free of cost) Without Boat

Filling and laying of Geo bags of size 1.03m X 0.70m excluding excavation of sand/silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling , double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed.(sand/silt, Geo Bag and Polypropylene thread will be supplied by the department free of cost) Without Boat

Collection and supply of River silt by truck carriage free from debries and other foreign material, etc. complete as directed. By manual Means For initial upto 1.00 km & for all lifts. For beyond initial 1 km & upto 10.00 km & for all lifts. For 8km

Excavation for Structures Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth.

Construction of temporary shed of two roof with mud plinth of 0.45 m height above ground level with Bhaluka bamboo post 1.5 m apart, driven at atleast 0.75 m below ground and height above plinth of 2.5m. Split Jatti bamboo/tarza wall 10 cm thick touch roofing over bamboo rua frame, placing at 0.15 m clear apart, fitted with bamboo kamies from binding doors and windows with Bamboo Chattai, strengthening with Bamboo frame binding with wire, roofing with TATA Shaktee roofing sheets etc., complete as directed. (Using Bhaluka Bamboo at the rate of 6.00 nos/ Rm & Jati Bamboo at the rate of 61.00nos / Rm)

Earth work in excavation of drainage channel to the proper grade and slopes as required including disposing the excavated debris/soil to a safe distance of minimum 50 m distance, etc. complete as directed. For lead up to 50 m and all lifts Wet & Sticky Soil

Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap) 450 mm dia piles (10.00 m length)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- all works up to plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the Engineer-in-charge; for the following grades of concrete. All works up to plinth level: Concrete of M25 grade with minimum cement content of 300 kg /cum

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock

Brick Soling Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412

PCC Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

M.S.Plate 8 mm for shutter

M.S.Joist 200 x 80 mm for stiffener

J type rubber seal 125 mm

C.I.Roller 75 x 100 mm

C.I.Roller pin. 16 mm

"F" shaped roller bracket size 100x125 mm

M.S.Flat 50x6 mm

Nuts and botls, assorted size

M.S.Washer for above

M.S.Electrodes 8 swg

Leather hand gloves

Waste cotton

painting brush 3"11

Steel wire brush

Emery paper

Red oxide primer

Antisol red oxide paint

Turpentine oil

Lubricating oil.

Diesel

D.A.Gas

Oxygen gas

M.S.Channel 200x75 mm

M.S.Angle 100x100x10 mm for shaft clamp

M.S.Channel 300x90 mm for bottom

Seperator stud with nut on both end with tube of length 250 mm to 460 mm

M.S.Shaft 63 mm

C.I.Boss 125 x 175 mm

M.S.Lock plate 300x300x8

M.S.Base plate 300x300x10 mm

G.I.Pipe 40 mm

H.D.Thrust ball bearing 75 mm dia

Shaft pin 150 x 16 mm

C.I.Pully 16 mm to 25 mm groove with centre hole size 150 mm

Pully stand made of 100x50 mm groove with channel size 150 mm

C.I.Pully pin.16mm dia.

C.C.Counter weight circular type 400 mm thick with 25 mm dia hole & 25 mmdia, hole at centre and two handles for carrying weight of 30 kg. each as per direction (machine finished.)

l wire rope 19 mm

Counter weight holder

U clamp 19 mm

Thread cutting 2 TPI on 50mm dia shaft

M.S.Angle 100x100x10 mm for gangway post and cross bar and bar.

M.S.Plate 6 mm for gangway skin plate

M.S.Angle 75x75x8 mmfor railingpost.

M.S.Angle 75x75x8mm for gangway railling.

Thread cutting 2 TPI on 50mm dia shaft

M.S.Angle 75x75x8 mm

M.S.Channel 150x50 mm for platform cross bar.

M.S.Angle 65x65x6 mm for railing post.

M.S.Angle 65x65x6 mm for gangway railling.

Transportation of materials from Workshop to Working site including loading and unloading.

Package No: 02 Location: Masimpur Military Station Amount: Rs. 40,86,40,577.04

Gas cutting kit(including oxygen meter,acetylene metre cutting torch,regulator.

First Aid kit(comprising of items like Band - Aid,Dettol 100 ml Idonie solution,Antiseptic cream,scissor,cottom,bandage,burnol,spray etc.complete).

Hire charfges of 25 kva Diesel Generating set with operator and P.O.L.

Hire charges for 5 HP water pump with operator and excluding P.O.L.

P.O.L.for running of 5 HP water pump.

Hire Charge of Crane with capacity of 3 ton with operator excluding fuel and lubricant.

POL for crane

Arc weldingcable, 400/600 AMP

Nylon rope