REPAIR/ REPLACEMENT OF INTERNAL WIRING AND CONNECTED DISTRIBUTION BOARDS AND SWITCHGEARS AT AF STATION BAREILLY.

Amount

Taking down carefully aluminium/ copper point wiring for light, fan, socket or power point etc. complete including conduit, fittings and fixtures such as ceiling rose, switch socket, pendants etc. including making good surface of wall, ceiling etc. complete all as specified.

Taking down carefully aluminium/ copper sub main wiring complete including conduit and conduit accessories all as specified.

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) drawn through and including rigid non-metallic PVC conduit of suitable size not less than 20mm dia, with all fittings, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan point controlled by one switch 6 Amps 1 way. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

All as per Item No. 3 herein before but for one 3 pin 6 Amp socket out let point on independent board.

All as per Item No. 3 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.

All as per item No. 3 herein before but point wiring with 1100 volt grade 2.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) duly earthed with same cable as for wiring above but green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) drawn through existing rigid non-metallic PVC conduit of size not less than 20mm dia, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan point controlled by one switch 6 Amps 1 way.

All as per Item No. 7 herein before but for one 3 pin 6 Amp socket out let point on independent board.

All as per Item No. 7 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.

All as per item No. 7 herein before but point wiring with 1100 volt grade 2.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) duly earthed with same cable as for wiring above but green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.

M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 Volts grade (ZHFR) Zero Halogen Flame Retardant Smoke Free Non-Toxic Non-Corrosive Electric Cable with multi stranded copper conductor of size 1.5 Sq.mm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia surface type including all flame proof conduit fittings and accessories such as tees, junction boxes, bends, duly tested by CMRI Dhanbad, duly earthed with same cable as for wiring above but green in colour as continuous earthing wire connected to earth dolly complete all as specified and directed by Engineer-in-Charge for one light/ fan point controlled by one flame proof rotary switch SP one way.

All as per Item No. 11 herein before but for one 3 pin 6 Amp socket out let point on independent board.

All as per Item No. 11 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.

M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 Volts grade (ZHFR) Zero Halogen Flame Retardant Smoke Free Non-Toxic Non-Corrosive Electric Cable with multi stranded copper conductor of size 2.5 Sq.mm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia surface type including all flame proof conduit fittings and accessories such as tees, junction boxes, bends, duly tested by CMRI Dhanbad, duly earthed with same cable as for wiring above but green in colour as continuous earthing wire connected to earth dolly complete all as specified and directed by Engineer-in-Charge for one 3 pin 15/ 25 Amps socket outlet point on independent board

M&L for sub main wiring concealed complete with two runs of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 20mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

M&L for sub main wiring concealed complete with two runs of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

All as per Item No. 16 herein before but with cable of size 10 sq.mm.

M&L for sub main wiring concealed complete with 4 runs of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 32mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with two runs of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

All as per Item No. 18 herein before but with cable of size 10 sq.mm.

S&F sub main wiring with 1100 volts grade heavy duty four runs of single core 6 Sq.mm size (Nominal Area) PVC insulated (FR-LSH) copper multi-stranded conductor cable, drawn into & including mild steel ERW conduit ISI marked not less than 50mm dia with necessary fittings, fixed on surface along with continuous two runs of single core 6 Sq.mm size (Nominal area) PVC insulated (FR-LSH) copper multi-stranded conductor cable (green colour) as earth wire complete all as specified and as directed.

All as per Item No. 20 herein before but with cable of size 10 sq.mm.

S&F sheet steel powder coated distribution board Vertical type TPN 8 ways, 415 volts, with 200 Amps rated copper bus bar, neutral link, earth bar, IP 53 protection and double door, suitable for mounting MCCB up to 160 Amps as incomer and MCBs as out going complete including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. [Cat No. 5077 47 of make Legrand/ Cat No. DBVTH008DD of Make: L&T]

S&F sheet steel powder coated distribution board Vertical type TPN 4 ways, 415 volts, with 200 Amps rated copper bus bar, neutral link, earth bar, IP 43 protection and double door, suitable for mounting MCCB up to 160 Amps as incomer and MCBs as out going complete including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. [Cat No. 5077 45 of make Legrand/ Cat No. DBVTH004DD of Make: L&T]

S&F sheet steel powder coated distribution board TPN 4 ways, 415 volts, with 200 Amps rated bus bar, neutral link, earth bar, double door with IP 43 protection, suitable for mounting MCBs all as specified and as directed including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. [Make: L&T/ Schneider/ Legrand/ ABB]

S&F sheet steel powder coated distribution board SPN 12 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, double door with IP 43 protection, suitable for mounting MCBs all as specified and as directed including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. [Make: L&T/ Schneider/ Legrand/ ABB]

S&F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, double door with IP 43 protection, suitable for mounting MCBs all as specified and as directed including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. [Make: L&T/ Schneider/ Legrand/ ABB]

S&F sheet steel powder coated distribution board SPN 4 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, double door with IP 43 protection, suitable for mounting MCBs all as specified and as directed including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. [Make: L&T/ Schneider/ Legrand/ ABB]

S&F in repairs MCCB 4 pole, 125 Amps, 16 KA, 415 Volts with thermal magnetic release connecting up with necessary spreader links complete all as directed. [Make: Legrand/ L&T/ Schneider/ ABB]

S&F in repairs MCCB 4 pole, 100 Amps, 16 KA, 415 Volts with thermal magnetic release connecting up with necessary spreader links complete all as directed. [Make: Legrand/ L&T/ Schneider/ ABB]

S&F in repairs MCCB 4 pole, 63 Amps, 16 KA, 415 Volts with thermal magnetic release connecting up with necessary spreader links complete all as directed. [Make: Legrand/ L&T/ Schneider/ ABB]

S&F MCB TPN 100 Amp, 10 KA, 'C' curve, 415 V AC. [Make: Legrand/ L&T/ Schneider/ ABB]

S&F MCB 4 Pole 100 Amp, 10 KA, 'C' curve, 415 V AC. [Make: Legrand/ L&T/ Schneider/ ABB]

S&F MCB TPN 63 Amp, 10 KA, 'C' curve, 415 V AC. [Make: Legrand/ L&T/ Schneider/ ABB]

S&F MCB SPN, 240 volts, 40 to 63 Amps, 'C' curve, 10 KA all as specified and as directed. [Make: L&T/ Schneider/ Legrand/ ABB]

S&F MCB SP, 240 volts, 6 to 32 Amps, 'C' curve, 10 KA all as specified and as directed. [Make: L&T/ Schneider/ Legrand/ ABB]

S&F in repairs single pole and neutral sheet metal enclosure with two pin and earth plug and socket with one single pole MCB 20Amps 240 Volts complete all as directed. [Make: L&T/ Schneider/ Legrand/ ABB]

S&F wall/ surface mounted type LED light fitting 1 X 20 watt (4' long) with extruded aluminium batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed including taking down existing unserviceable light fitting. [Cat. Part No. BN021C LED22S PSU CW GR (SmartBright) of make: Philips or Cat No. ENDURALINEARNEOBS20WLED865SPCWH of make: Havells/ Cat No. CCS-100-20-65-HL2-DP-NWH of make: CG/ Cat No. LL20-221-XXX-65NE3 of make: Wipro]

S&F wall/ surface mounted type LED light fitting 1 X 9 to 12 watt (2' long) with extruded aluminium batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed including taking down existing unserviceable light fitting. [Cat. Part No. BN 021 LED12S 6500 PSU GR (SmartBright) of make: Philips or Cat No. ENDURALINEARNEOBS10WLED865SPCWH of make: Havells/ Cat No. LL20-111-XXX-65NE3 of make: Wipro]

S&F recess mounted direct lighting LED Luminaire 34-36W of size 2'x2', with powder coated CRCA housing, seamless front frame, flat white high transmission acrylic cover fixed to Modular/ Gypsum/ POP ceiling complete including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to fitting all as directed including taking down existing unserviceable light fitting. [Cat No. PLUTONEO2X2PLR34WLED857S of make: Havells or Cat No. RC380B LED36S-6500 G5 L60W60 PSU OD of make: Philips or Cat No. LCTLRNE-36-FO-CDL of make: CG/ Cat No. CRCO10S038HP57GL of make Wipro with frame of Cat No. 9180P01089 LP]

S&F energy efficient building security light fitting not less than 35W, with pressure die cast aluminium housing, heat resistant glass, IP-65 consisting of high power LED, control driver etc. along with necessary cable connection with 3 Core 2.5 sq.mm copper cable, including 40mm dia GI pipe bracket, bolts, nuts etc. fixed to walls complete all as specified and as directed including taking down existing unserviceable light fitting. [Cat No. LSTS-36-CDL-M of make: CG or Cat No. BRP046 LED 36 CW MR S1 PSU GR of make: Philips or Cat No. ENDURAPEARLNEOSL40W LED757 PASYTOPC of make: Havells/ Cat No. LR13-501-XXX-57-XX of make Wipro]

S&F in repairs LED lamp PL-L 18W suitable for fixing to conventional 2'x2' ceiling light fittings all as directed. [Cat No. LED PL-L 18W, 6500K 2G11 of make: Philips or equivalent in Osram/ Havells]

S&F in repairs LED lamp 18W 2/4 pin suitable for fixing to conventional ceiling light fittings all as directed. [Philips/ Osram/ Havells]

S&F Surface mounted LED down lighter 18 to 20 Watt in powder coated/ aluminium die cast housing with integrated electronic driver complete including connecting up with three core twisted flexible copper conductor cable of suitable size all as directed including taking down existing unserviceable light fitting. [Cat No. ENDURANEOHESURFA CEDLS21WLED857S of make: Havells or Cat No. SM251C LED20S- 6500 PSU WH of make: Philips or Cat No. BZSLOS NXT 18L LED WH SD of make: Bajaj]

Supply and install integral LED aviation obstruction light 12W comprising of aluminium housing with polycarbonate enclosure, 302 nos. LEDs complete including necessary fixing arrangement, installed on top of hangars/ OH tanks etc. all as directed including taking down existing unserviceable light fitting. [Cat No. BGAV 302 LED of make: Bajaj or equivalent in Future Lighting Solutions (P) Ltd Nagpur/ Siren & Electricals, Chennai]

S&F switch piano, flush type, single pole, one way, 5/6 Amps, 230V AC all as specified.

S&F socket outlet 6 Amp, 2 in 1, 5 pin, 230V AC

S&F socket outlet 6/16 Amp, 2 in 1, 6 pin, 230 V AC

S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230V AC all as specified.

S&F ceiling rose PVC/ Poly carbonate isolated body, three terminal, 230 Volts AC complete all as specified.

S&F fan regulator electronic socket step type, 100 Watts, 230 Volts, flush type all as specified.

S&F Lamp holder, PVC/Polycarbonate body of any type with back plate suitable for batten fittings.

S&F Flame proof, weather proof direct entry type rotary switch with cable terminal box in cast aluminium alloy LM-6 enclosure epoxy powder coated single pole 230 volts 16 Amp ON / OFF switch AC certified by CRMI for group II-A & II-B including compression glands complete all as specified and directed including taking down existing unserviceable switch. [Make:- Sudhir/ Baliga/ Shyam/ Bajaj].

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16 Amp, 250V, 2P + earth complete all as specified and directed including taking down existing unserviceable socket. [Make:- Sudhir/ Baliga/ Shyam/ Bajaj].

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 25 Amp, 250V, 2P + earth complete all as specified and directed including taking down existing unserviceable socket. [Make:- Sudhir/ Baliga/ Shyam/ Bajaj].

S&F Industrial plug and socket 3P+N+E-FP, MCB TPN combined unit with socket consisting of MCB TPN 63 Ampere, 10 KA, 'C' series, 415 volts and surface mounting box IK-08, P-17 Tempra Plug complete all as specified and directed including taking down existing unserviceable socket. [Cat No. 5078 64 of make Legrand/ Cat No. DBMPS463SD of Make: L&T]

S&F Industrial plug and socket 2P+E-DP, MCB SPN combined unit with socket consisting of MCB SPN 32 Ampere, 10 KA, 'C' series, 415 volts and surface mounting box IK-08, P-17 Tempra Plug complete all as specified and directed including taking down existing unserviceable socket. [Cat No. 5078 63 of make Legrand/ Cat No. DBMPS332SD of Make: L&T]

S&F PVC blanking plates 1/ ½ module for DBs

M&L for earthing comprising of copper earth plate electrode 600mm X 600mm X 3mm thick buried directly in ground preferably in vertical position, (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to copper earth strip of size 20 X 3mm by means of nuts, bolts, check nuts & washers of copper all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board/ main DB’s/ earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate in alternate layers of 150mm in all directions with & including watering pipe 20mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick precast RCC cover of size 450 mm X 450mm with 1:2:4, type B-1 duly reinforced with 8mm dia TMT steel bars @ 150mm c/c both ways with suitable lifting handle made of 10mm dia mild steel round bars to lift the cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 40 mm bore including testing on completion of job complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm thick buried directly in ground (earth pit not less than 2.25m below ground level) with top edge of earth plate not less than 1.50m below normal ground level, connected to galvanized earth lead 4mm dia all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board/ main DB’s/ earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate 150 mm in all directions with & including watering pipe 20mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick precast RCC cover of size 450 mm X 450mm with 1:2:4, type B-1 duly reinforced with 8mm dia TMT steel bars @ 150mm c/c both ways with suitable lifting handle made of 10mm dia mild steel round bars to lift the cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15mm bore including testing on completion of job complete all as specified and directed.

S&F in repairs PVC three core flexible wire with copper conductor of size 23/0.0076" (0.70sq.mm) confirming to IS-434 from connector of ceiling/ exhaust fan to the mains complete all as specified and directed

S&F in repairs PVC insulated twin core electric cable with copper conductor flexible cords of size 0.5 Sq.mm for ceiling fans electric connection complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs LED String Light strip, decorative, multi colour with different modes, minimum 20 m long, 230 volts along with suitable type LED driver complete all as specified and as directed.

S&F PVC extension junction box with combined switch and socket, 6A, 6 module, 3/5 Pin socket 230V for multiple electrical appliances along with connection of twin core PVC cable of 1.5 Sq.mm up to a length of 5 Mtr complete as required and as directed. [Make: Anchor/ Cona/ GM/ Leader]

S&F PVC extension junction box with combined switch and socket, 16A, 4 module, 3/5 Pin socket 230V for multiple electrical appliances along with connection of twin core PVC cable of 2.5 Sq.mm up to a length of 5 Mtr complete as required and as directed. [Make: Anchor/ Cona/ GM/ Leader]

S&F in repairs Surface PVC box 4 Module of size 85x145x42mm all side covered complete all as specified and as directed. [Make: Anchor/ Cona/ GM/ Leader]

S&F in repairs Surface PVC box 6 Module of size 85x219x42mm all side covered complete all as specified and as directed. [Make: Anchor/ Cona/ GM/ Leader]

S&F in repairs Surface PVC box 2 Module of size 85x85x40mm all side covered complete all as specified and as directed. [Make: Anchor/ Cona/ GM/ Leader]

S&F in repairs rigid non metallic concealed PVC conduit ISI marked of size 20mm dia inclusive of all tees, bends, elbow, reducers, bell mouth tube ends and fixing accessories such as couplers. locknuts, saddles, pipe hook etc. over the surface/recess complete all as specified and directed.

S&F in repairs rigid non metallic PVC casing and capping, ISI marked of size 20x12mm inclusive of all fixing accessories and casing pin etc. over the surface complete all as specified and directed.

Supply and laying XLPE insulated armoured heavy duty electric cable of size 2 core 10sq.mm with aluminium conductor 1100 Volts grade, ISI marked as per IS 7098-I, fixed to walls with necessary porcelain insulators and saddles etc. complete including taking down existing burnt cable all as specified.

Taking down existing LED Tube light fitting 20W of any type along with suitable fixing clamps / fixing arrangement in safe custody without any damage and re-fixing the fittings in serviceable conditions at same location after necessary re-wiring /repairs as required satisfactorily complete all as specified and as directed.

Taking down existing LED Tube light fitting 10W of any type along with suitable fixing clamps / fixing arrangement in safe custody without any damage and re-fixing the fittings in serviceable conditions at same location after necessary re-wiring /repairs as required satisfactorily complete all as specified and as directed.

Taking down existing LED Bulk Head light fitting of any type along with suitable fixing clamps in safe custody without any damage and re-fixing the fittings in serviceable conditions at same location after necessary re-wiring /repairs as required satisfactorily complete all as specified and as directed.

M/s Agarwal Builders

Zaigham Enterprises