REPAIR MAINT REPLACEMENT OF COOLING APPLIANCES DESERT COOLERS REFRIGERATORS AND OTHER MISC WORKS IN TECHNICAL AREA AND SALAWAS AT AF STN JODHPUR

Amount

Material & labour for taking down the desert cooler, scraping and removing old paint of desert cooler body (steel surface) and preparation of steel surfaces including necessary denting/welding/cutting etc and spray painting two coats of smoke grey synthetic enamel paint (Ist quality) over a coat of red oxide primer on outer surface and inner surface i.e. water tank and body, fan mounting blades shall be painted with a coat of anticorrosive black paint over and including a coat of red oxide primer complete for desert cooler of any size and capacity complete all as specified & directed by Engineer-in-Charge. Note :- Spray Painting shall be carried out with spray gun and compressor with other required T&P.

Material & labour for general servicing, cleaning of desert cooler and oiling of fan motor including replacement of grass pad of size 36 Inches x 24 Inches x 30mm thick approx or nearest standard size (Each Set of Three Pads for each desert coolers) standard size complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs welded wire mesh 3”x2” rectangle block of 12 Standard Wire Gauge galvanized iron of size 24”x28” in size for side panels of desert coolers complete all as specified & directed by the Engineer-in-Charge.

Taking out fan motor single phase 230 Volts, 1400 RPM 3 speed 1/8 HP from desert cooler and rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete including replacement of gun metal bushes and reassembling and fixing in position complete all all as specified & directed by the Engineer-in-charge.

Taking out fan motor 3 phase phase 440 Volts, of any capacity from industrial cooler and rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete including replacement of gun metal bushes and reassembling and fixing in position complete all all as specified & directed by the Engineer-in-charge.

Supply & fixing in repacement fan motor suitable for desert cooler 180 watts with copper winding fan speed 1400 RPM, 3 Speed complete all as specified & directed by Engineer-in-Charge.

S&F in repair, top cover of desert cooler , of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet including gas welding at joints in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, front side grill of desert cooler of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet including gas welding at joints in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, side/back shutter fabric item made out of 1 mm thick galvanised iron sheet of size suitable for desert cooler in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, corner of the desert cooler made out of 1 mm thick galvanised iron sheet of size suitable for desert cooler including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S&F in repair, bottom tank of desert cooler , of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet with gas welding at joints in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engineer-in-charge.

S & F in repairs legs set with gromate for desert cooler of any capacity and make as per existing complete all as specified & directed by the Engineer-in-charge.

S&F in repair, PVC flexible pipe of 16 mm outer dia complete all as specified & directed by Engineer-in-charge.

S&F in repair, grass pad (Set of three) fixed in three sides panel of desert cooler complete all as specified & directed by Engineer-in-charge.

S&F in repair, plug top 3 pin 5 amps, 230 volts (ISI marked) complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC insulated and PVC sheathed round flexible three core copper conducter cable of size 1.5 sqmm complete all as specified & directed by Engineer-in-charge.

S&F in repair, capacitor 4 MFD for fan motor of desert coolers complete all as specified & directed by Engineer-in-charge.

S&F in repair, submersible pump PVC body 230 volts, 1/60 HP for desert cooler complete all as specified & directed by Engineer-in-charge.

S&F in repair, aluminium fan blade powder coated for fan motor of desert cooler of 20 inch sweep complete all as specified & directed by Engineer-in-charge.

S&F in repair, cast iron ring of cooler fan motor with clamps incluiding nuts& bolts suitable for desert coolers complete all as specified & directed by Engineer-in-charge.

S&F in repair, PVC 3 way distributor suitable for 15 mm flexble pipe with nuts and screws for desert coolers complete all as specified & directed by Engineer-in-charge.

Supply & fixing in repairs 15mm bore PVC Elbow (ISI Marked) for desert cooler complete all as specified & directed by the Engineer-in-Charge.

S&F in repairs float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 15 mm bore iron pipe, weight not less than 140 grams/each, suitable for water/desert coolers complete all as specified & directed by Engineer-in-charge.

Material & labour in repairs for fabrication of stand for desert cooler with 40mm x 6mm thick angle iron including welding, cutting, applying two coats of synthetic enamel paint and installing at site with locking arrangement complete all as specified & directed by the Engineer-in-Charge.

M&L for cutting and taking out compressor of water cooler of capacity 40/80 Ltr and S&F compressor with jointing of copper refrigerent pipe line in and including charging of refrigerent gas to required level complete all as specified & directed by Engineer-in-charge.Make- As per existing make and model.

M&L for cutting and taking out compressor of water cooler of capacity 60/120 Ltr and S&F compressor with jointing of copper refrigerent pipe line in and including charging of refrigerent gas to required level complete all as specified & directed by Engineer-in-charge.Make- As per existing make and model.

M&L for cutting and taking out compressor of water cooler of capacity 150/180 Ltr and S&F compressor with jointing of copper refrigerent pipe line in and including charging of refrigerent gas to required level complete all as specified & directed by Engineer-in-charge.Make- As per existing make and model.

S&F in repair fan motor suitable for water cooler of capacity 40/80 ltr copper wound complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair fan motor suitable for water cooler of capacity 60/120 ltr copper wound complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair fan motor suitable for water cooler of capacity 150/180 ltr copper wound complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair condensor coil of water cooler of capacity 40/80 litres complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair condensor coil of water cooler of capacity 60/120 litres complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair condensor coil of water cooler of capacity 150/180 litres complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repairs plastic fan blade suitable for water cooler of any capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair capacitor 10 MFD for fan motor of water coolers/refrigerator complete all as specified & directed by Engineer-in-charge.

S&F in repair capacitor 15 MFD for fan motor of water coolers/refrigerator complete all as specified & directed by Engineer-in-charge.

S&F in repairs 15 mm size water tap, cast copper alloy, chromium plated push type suitable for water cooler of any capacity complete all as specified & directed by Engineer-in-charge.

S&F in repairs starting capacitor (oil type) 80-100 mfd suitable for water cooler of any capacity complete all as specified & directed by Engineer-in-charge.

S&F in repairs running capacitor (oil type) 30-60 mfd suitable for water cooler of any capacity complete all as specified & directed by Engineer-in-charge.

S&F in repair, thermostat suitable for water cooler/refrigerator of any capacity complete all as specified & directed by Engineer-in-charge.

S&F in repair, waste water tray, stainless steel with coupling suitable for water cooler of capacity 40/80 & 60/120 liters & 150/180 liters complete all as specified & directed by Engineer-in-charge.Make- As per existing make and model.

S&F in repair, relay suitable for water cooler/refrigerator of any capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair, over load protector for water cooler of any capacity complete all as specified & directed by Engineer-in-charge.Make- As per existing make and model.

S&F in repair, PVC drain out pipe, heavy duty 32/40 mm dia, wall thickness 2 mm having length not less than 1.0 mtr complete with fittings such as nipple, clip etc complete fixed to water coolers of any capacity complete all as specified & directed by Engineer-in-charge.

Material & labour for finding out the leakage with the pressure test of the condenser or cooling coil of water cooler/ Refrigerator/ Deep Freezer of any capacity storage/ cooling capacity and dismantling the same for repair, reassembling the same after repair of the leakage point by brazing/soldering with and including testing the Eqpt to the entire satisfaction of the Engineer-in- Charge.

Material & labour for servicing of water cooler/ Refrigerator/ Deep Freezer of any capacity at existing location by cleaning of condenser, cooling coil, and other components with cooling coil Rinse solution & clean water, greasing of fan motor including cleaning of storage tank of water cooler with treated water after applying the potassium permanganate solution etc without damaging any part complete all as specified & directed by the Engineer-in-Charge.

M&L for cutting and removing unservicable freezer unit of refrigerator capacity 165 to 285 Litres of any make, and supply and fix new freezer unit with door and chill tray including jointing, brazing, recharging of refrigerant gas and testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

M&L for cutting and removing unservicable freezer unit of refrigerator capacity 310/320 Litres of any make, and supply and fix new freezer unit with door and chill tray including jointing, brazing, recharging of refrigerant gas and testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in replacement, PCB control card suitable to refrigerator to any capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair, condensor fan motor for deep freezer of any make and capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

Cutting and taking out compressor of deep freezer of any capacity and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

Cutting and taking out compressor of refrigerator of capacity 215 to 320 litres of any make, & replacing the same compressor with new of same make of model complete, re-installing in original position with all accessories like relay with over load protector, filter & supply & recharging of refrigerant complete including testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

Cutting and taking out compressor of refrigerator of capacity 165 to 215 litres of any make, & replacing the same compressor with new of same make of model complete, re-installing in original position with all accessories like relay with over load protector, filter & supply & recharging of refrigerant complete including testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair, capillary tube suitable for any make & capacity water cooler/refrigerator complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

Supply & charging of refrigerant gas R-22 (freon) for charging in Refrigerator/ water cooler/ deep freezer complete and checking of leakage, testing for proper functioning all as specified & directed by Engineer-in-charge.

Supply & charging of refrigerant gas R-134C (freon)/ R-600A for Refrigerator/water cooler/ deep freezer complete and checking/testing for proper functioning all as specified & directed by Engineer-in-charge.

S&F in replacement of PVC connection pipe 15mm dia of both ends PTMT nuts and 600mm length complete all as specified and directed.

Supply & fixing in repairs stop valve cast iron copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed of 15mm dia complete all as specified & directed by Engineer-in-Charge.

Supply & fixing in repairs steel water tubing 15 mm dia medium grade with all fitting laid in wall/ trenches complete all as specified & directed by Engineer-in-Charge.

Material & labour for replacement of plywood grade BWR any size 6mm thick ISI Marked with wooden scandle for window frame complete at various location complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs of Honeycomb Cooling Pad 2" inch thick suitable for Kavva industrial cooler complete all as specified & directed by Engineer-in-Charge.

Supply & fixing in repairs of filter suitable for refrigerator any size and make as per existing at site complete all as specified & directed by the Engineer-in-Charge.

Material & labour in repairs submain wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 volt grade of size 4.0 Sqmm and one run of 4.0 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete all as specified & directed by the Engineer-in-Charge. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid as one length.

Supply & fixing in repairs sheet metal enclosure SPN with two pin and earth plug socket with & including 20Amps MCB 'C' curve single pole 240 Volt AC complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repair MCB SP 25 Amp ‘C’ curve type, 240 volts, 10 KA complete all as specified & directed by the Engineer-in-Charge.

M&L in repairs point wiring for 5 amp socket on independent board with 1.5sqmm PVC insulated 1100 volt grade IS -694 FRLS multi stranded but unsheathed copper conductor cable drawing through and including PVC casing capping and terminated in existing terminal box with 3 mm thick plastic laminated sheet cover for fixing of switches,sockets and fan regulator including continuous earth wire with copper cable 1.5 sq mm similar description of main cable connected to main earth dully complete all as specified and directed by Engineer in Charge.

S&F in repair socket outlet 2 in 1, 3 pin 5 amp complete all as specified and directed.

S&F in repair, switch piano flush type 240 volts, single pole one way 5 amps complete all as specified & directed.

S&F in repair acrylic vegetable tray suitable for existing refrigerator of cap 165 to 310 ltr complete all as specified and as directed.

M&L for repair to body base of water cooler 40/ 80 ltr capacity, by replacing the rusted portion with PGI sheet to match with existing body with and incl preparation of surface to smooth finish and duly painted complete with two coats of synthetic enamel paint complete all as specified and as directed.

All as per Item No. 71 above but capacity 60/ 120 ltr water cooler.

All as per Item No. 71 above but capacity 165 to 320 ltr refrigerator.

M&L for preparation of exterior portion of water cooler 40/ 80 ltr capacity to a smooth finish and applying two coats of synthetic enamel paint complete all as specified and as directed.

All as per Item No. 74 above but 60/120 ltr capacity.

S&F in repair cabin bulb 5 Watt for refrigerator complete all as specified and as directed.

S&F in repair cabin bulb holder for refrigerator with cabin brackets complete all as specified and as directed.

S&F in repair fan motor suitable for refrigerator 100 ltr to 195 ltr capacity complete all as specified and as directed.

S&F in repair fan motor suitable for refrigerator 200 to 280 ltr capacity complete all as specified and as directed.

S&F in repair fan motor suitable for refrigerator 292 to 335 ltr capacity complete all as specified and as directed.

S&F in repair timer suitable for refrigerator of cap 100 ltr to 195 ltr capacity complete all as specified and as directed.

S&F in repair timer/ bio meter/ heater suitable for refrigerator of cap 200 to 335 ltr capacity complete all as specified and as directed.

S&F in repair industrial cooler motor suitable 3 phase, 440 volt for for jambo industrial cooler complete all as specified and as directed.

S&F in repair gas filter and NRV suitable for existing refrigerator and water cooler of capacity 40 to 280 ltr complete all as specified and as directed.

Material & labour for disconnecting, cutting and taking out unserviceable sealed unit AC compressor 1.5 Tonne capacity, single phase, 230 volt including necessary modification of the foundation as required to suit the new compressor, vacumisation, pressure testing, leakage, rectification and supply & fixing of new compressor of same capacity and make including gas charging R-22/R-407C and testing complete all as specified & directed by the Engineer-in-Charge.

Material & labour for disconnecting, cutting and taking out unserviceable sealed unit AC compressor 2 Tonne capacity, single phase, 230 volt including necessary modification of the foundation as required to suit the new compressor, vacumisation, pressure, testing, leakage, rectification and supply & fixing of new compressor of same capacity and make including gas charging R-22/R-407C and testing complete all as specified & directed by the Engineer-in-Charge.

Material & labour for taking out unserviceable sealed unit (Inverter AC compressor) 1.5 ton capacity, single phase, 230 volt including necessary modification of the foundation as required to suit the new compressor, vacumisation, pressure, testing, leakage, rectification and supply & fixing of new compressor of same capacity and make including gas charging R-410A and testing complete all as specified & directed by the Engineer-in-Charge.

Material & labour for taking out unserviceable sealed unit (Inverter AC compressor) 2 Tonne capacity, single phase, 230 volt including necessary modification of the foundation as required to suit the new compressor, vacumisation pressure, testing, leakage, rectification and supply & fixing of new compressor of same capacity and make including gas charging R-410A and testing complete all as specified & directed by the Engineer-in-Charge.

Material & labour for WATER JET servicing of SPLIT TYPE AC's of 1.5/2.0 Tonne capacity (complete indoor and outdoor unit by using service bag cover & cooling coil rinse solution for cleaning of coils), taking out the indoor top cover outdoor top cover from existing location, cleaning of cooling coil , condenser coil, and other components using clean water greasing of fan, motor, blower etc without damage any part and reinstall at the same location complete all as specified & directed by the Engineer-in-Charge. (Note:- Contractor has to provide blower and jet pump for cleaning and washing of AC, A separate PVC bag will also be provided for collection of waste, mechanic will be responsible to clean the site after servicing. Contractor shall at his own cost arrange water for servicing purpose.)

Material & labour for WATER JET servicing of WINDOW TYPE AC's of 1.5/2.0 Tonne capacity (complete unit by using service bag cover & cooling coil rinse solution for cleaning of coils), taking out the indoor & outdoor cover from existing location, cleaning of cooling coil , condenser coil, and other components using clean water greasing of fan, motor, blower etc without damage any part and reinstall at the same location complete all as specified & directed by the Engineer-in-Charge. (Note:- Contractor has to provide blower and jet pump for cleaning and washing of AC, A separate PVC bag will also be provided for collection of waste, mechanic will be responsible to clean the site after servicing. Contractor shall at his own cost arrange water for servicing purpose.)

Supply & fixing in repairs Air conditioner Running capacitor of capacity 2.5 MFD, 230 volts, 50 HZ suitable for indoor unit complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs Air conditioner Running capacitor of capacity 4 MFD, 230 volts, 50 Hz suitable for indoor unit complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs Air conditioner Running capacitor of capacity 6 MFD, 230 volts, 50 Hz complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs Air conditioner Running capacitor of capacity 45 MFD, 230 volts, 50 Hz complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs Air conditioner Running capacitor of capacity 50 MFD 230 volts, 50 Hz complete all as specified & directed by the Engineer-in-Charge.

Taking down existing condensing fan motor from the unit and Material & labour for rewinding of condensing fan motor of capacity 1.5/2.0 Tonne (split type/window type) of any make with super enamelled copper wire winding wire including replacement of the motor bushes and shaft and testing on load for the entire satisfaction of Engineer-in-Charge.

Taking down existing fan blower motor of cooling unit and Material & labour for rewinding of fan blower motor of cooling unit of capacity1.5/2.0 ton (split type/window type) unit with supper enamelled copper winding wire of suitable gauge wire including replacement of the shaft and bushes and testing on load for the entire satisfaction of Engineer-in-Charge.

Supply & fixing in repairs condensing fan motor of capacity 1.5/2.0 Tonne for split type AC's single phase, AC 230 volts, 50 Hz of original make as per existing in the machine at site complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs condensing fan DC motor for 1.5/2.0 Tonne capacity split type AC's (For outdoor unit) of original make as per existing in the machine at site complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in replacement blower suitable (for indoor unit) of split type AC's capacity 1.5/2.0 Tonne of original make as per existing in the machine at site complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs fan blades (ISI Marked) of suitable size for outdoor unit of 1.5/2.0 Tonne Split type AC's complete all as specified & directed by the Engineer-in-Charge.

Material & labour for repairing of PCB control card suitable for 1.5/2.0 Tonne capacity split type AC/window AC, single phase and make the PCB control card functional complete all as specified & directed by the Engineer-in-Charge.

Material & labour for repairing of PCB control card suitable for 1.5/2.0 Tonne capacity invertor split type AC/ window AC, single phase and make the PCB control card functional complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in replacement PCB control card suitable for AC indoor unit 1.5/2.0Tonne capacity split type AC, single phase of original make as per existing in the machine at site complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in replacement PCB control card suitable for DC indoor unit 1.5/2.0 TR capacity invertor split type AC, single phase of original make as per existing in the machine at site complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in replacement PCB control card suitable Outdoor unit for invertor type split AC's capacity 1.5/2.0 Tonne of original make as per existing in the machine at site complete all as specified & directed by the Engineer-in-Charge.

Supply only in replacement of remote suitable for 1.5/2.0 Tonne capacity split AC of original make as per existing at site complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs capillary copper tube (ISI Marked) of split /window type AC capacity 1.5/2.0 Tonne complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repair to replacement of condenser coil for window type/Split AC 1.5/2.0 Tonne capacity of any make and size including charging of gas R-22/R407C complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs water tray (ISI Marked) for Indoor unit of split AC of any capacity and make AC as approved by Engineer-in-Charge.

Supply & fixing in repairs of relay of split type AC of any make and any capacity complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs thermostat suitable for any make of split/window type AC 1.5 ton capacity complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs single pole contactor suitable for split type AC capacity 1.5/2.0 Ton complete all as specified & directed by the Engineer-in-Charge.

Material & labour for finding out the leakage with the pressure test of the condenser or cooling coil of window type AC's/split type AC's of 1.5/2.0 ton and dismantling the same for repair, reassembling the same after repair the leakage point by brazing/soldering with and including charging the gas R-22/R-410A/ R-407C/ R-32 and testing the AC to the entire satisfaction of Engineer-in-Charge.

Supply, laying and commissioning of cable in replacement PVC sheathed cable with multistranded copper conductor of size 2.5 sqmm 3 core complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs copper tube (ISI Marked) of size ⅝” or 1/2 "dia for any capacity of split type AC complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs copper tube (ISI Marked) of size ¼” dia for any capacity of split type AC complete all as specified & directed by the Engineer-in-Charge.

Material & labour in repairs fire resistance, elastomeric Nitrile rubber tubing (NBR) for Pipe insulation thickness 10mm of size ⅝" or 1/2" dia of split type AC's any capacity complete all as specified & directed by the Engineer-in-Charge.

Material & labour in repairs fire resistance, elastomeric Nitrile rubber tubing (NBR) for Pipe insulation thickness 10mm of size¼"dia of split type AC's any capacity complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs flexible drain pipe ( PVC BRAIDED hose pipe) of size 15 mm dia, for split type AC any capacity and any make complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in replacement Voltage Stabilizer of capacity 05 KVA, for automatic operation, single phase naturally air cooled, indoor type and designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5 % complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in replacement display card of Indoor unit of Split AC capacity 1.5/2.0Tonne of original make as per existing in the machine at site complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs L & key valve (ISI Marked) of size 5/8" or 1/2" for condenser unit split type AC 1.5/2.0 Ton , proper leak check shall be carried after replacement of valve complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs L & key valve (ISI Marked) of size 1/4" for condenser unit split type AC 1.5/2.0 Ton , proper leak check shall be carried after replacement of valve complete all as specified & directed by the Engineer-in-Charge.

Material & labour for fabrication of canopy stand for outdoor split type AC unit with and including angle iron 40 mm x40 mm x 6mm, with GI sheet on the top, including welding, cutting including painting and grouted in PCC 1:2:4 on roof/floor installation at site complete all as specified & directed by the Engineer-in-charge.

S&F in repair contact sensor (indoor/ outdoor/ gas pipe/ temprature) suitable for existing split AC inverter type or non inverter type of cap 1.5/ 2.0 TR complete all as specified and as directed.

Supply & fixing in repairs of flair nut size 5/8" and 1/2"dia for split type AC of any capacity complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs of flair nut size 3/8" and 1/4" dia for split type AC of any capacity complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs of dead nut size 1/4 '' dia for any capacity of split type AC complete all as specified & directed by the Engineer-in-Charge.

Supply and filling gas freon (R32/R410A) or suitable for existing system complete all as specified and as directed. Note:- (i) Gas bottle to be arranged by contractor. (ii) Labour charges deemed to be included in quoted rate.

Supply & fixing in repairs AC motor suitable for Indoor unit blower of split type AC 1.5/2.0 Tonne of original make as per existing in the machine at site complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs DC motor (Inverter type) suitable for Indoor unit blower of split type AC 1.5/2.0 Tonne of original make as per existing in the machine at site complete all as specified & directed by the Engineer-in-Charge.

Material & labour for sealing the bore holes of walls with expandable polyurethane foam complete all as specified & directed by the Engineer-in-Charge. Note :- Only existing Holes in walls to be sealed.

S&F in repair blower bush suitable for split AC 1.5TR/ 2 TR complete all as specified and as directed.

S&F in repair swing motor suitable for existing split AC of cap 1.5/2.0 TR complete all as specified and as directed.

M&L for AC water leakage,opening of indoor unit of AC, removing of drain tray, cleaning of drain tray, clear all blockage, make proper insulation to copper pipe and cover these pipe with non-adhesive tape complete and fix the unit on wall and testing complete all as specified and directed.

M&L for dry servicing of AC's of split type or window type capacity 1.5 /2 TR from the existing site and taking out filter and dry servicing the complete in all respect and fixing the same in original location and testing complete all as specified and directed. (Note: Contractor has to provide blower and Mechanic will be responsible to clean the site after servicing.)

S&F in repair to replacement of burnt out indoor unit of split type AC carefully removing connection of old unit and fix indoor unit of same capacity, make proper connection complete all as specified and as directed by EIC.

S&F Digital AC timer with Dip switch single phase suitable for 2 nos AC for operation of 12 Hr Each complete all as specified and directed by EIC

Supply & fixing in replacement cooling coil for window type/Split AC 1.5/2.0 Tonne capacity of any make and size including charging of gas R-22/R407C complete all as specified & directed by the Engineer-in-Charge.

S&F in replacement of damaged outdoor body with legs of Split AC 1.5/2.0 Ton of same make and capacity complete all as specified and directed by EIC. (Notes for srl item No 1 to 141 :- (1) This work is for Tech area, Salawas, site 1A & 1B of SU complete area. (2) Mechanic will collect complaint from Eng-in-Charge/ JE E/M via any mode of communication and complaints of cooling appliances (AC, Ref, Water Cooler, Deep Freezer) should be attended and rectified within 24 hrs of receipt. (3) Penalty of rupees 500.00 Rs per day per complaint shall be levied to contractor in case of non rectification of compliants within 24 hrs of receipt of same.)

Shiv Shakti Enterprises (BID ID -3362495)

M/S KAUTILYA GARG (BID ID -3362522)

M/s R K Enterprises (BID ID -3362560)