PROVISION OF COMPOUND WALL NEAR MD ACCN,CERTAIN BR WORK NEAR PARADE GROUND, KITCHEN WORK, SIGN BOARDS, ENTRANCE GATE, CERTAIN BR AND EM WORK IN INLIVING BLOCKS, AND CGOM ANT OTHER MINOR WORKS AT INAZ VILLAGE VERAVAL UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc., n. exc 10 sq m on plan and n.exc, 1.5 m in depth and getting out in soft/ loose soil, complete all as specified and directed.

M&L for Plain Cement concrete 1:4:8 type D-2, (using 40mm graded aggregate) as in foundations, filling and mass concrete all as specified and as directed by Engr-in-Charge.

M&L for walling of Porbandar stone masonry well bonded and solidly hearted built in CM 1:6 as in compound wall, etc., complete all as specified and directed.

S&F for precast cement concrete louvres and jallies, 35 mm thick (measured solid), including all mouldings but excluding frame/ Baluster (Precast frame/Baluster shall be measured and paid separately) under respective items

S&F for precast cement concrete 1:2:4 type B0 (12.5 mm graded aggregate) interlocking designer pillars/ Balusters (Size- 100 x 100 mm) set in CM 1:4 for fixing louvres and jallies including necessary mouldings, complete all as specified.

Returning filling in, including spreading leveling, watering and well ramming in layer n. exc 25 cm in soft/loose soil complete all as specified and directed.

Removal of excavated material to a distance exc 250 mtr but n.exc. 500 mtr and depositing as directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Use and waste of formwork to the sides of concrete footing, base of columns, plinth beams and similar work for vertical as in batter rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to sides and soffits of beams, bands and the like for rough finished surface of concrete complete all as specified and directed.

Use and waste of formwork to the sides of rectangular columns for rough finished surfaces of concrete.

Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item no. 11 but 5 to 10 mm dia as in stirrups. -ditto-

M&L for RCC M-30, using 20 mm graded stone aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

M&L for RCC M-30, using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

M&L RCC M-30, using 20 mm graded stone aggregate, as in Columns, pillars, piers, posts and struts, complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work, complete all as specified and directed by Engr-in-Charge.

M&L Rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed .

M&L for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturers instructions, complete all as specified and directed by Engr-in-charge.

S&F for Mild Steel Gate ornamental and intricate design framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; hold fast for steel gate and similar work including for portion framed and hung as gates with heavy hold fast, including pintle hinges, stops, hand-made sliding bolts etc. conforming to Fe 410-0 or Fe 310-0.

M&L for preparing new steel surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer of approved shade all as specified and directed.

M/L for Hardcore of gauge exc 63mm but n.exc100mm deposited spread and leveled in layers n.exc 15cm thick watered an reamed to a true surface with broken stone or boulders, complete all as specified and directed.

M&L 100 mm thick Plain cement concrete 1:2:4, type B-1 (using 40 mm graded stone aggregate) as in flooring, complete all as specified and directed by Engr-in-Charge.

M&L 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15 mm thick 1:6 etc. complete all as specified and as directed by Engr-in-Charge

S&F Wall mounted Pyramid Kitchen Chimney With Elegant Look (minimum size 47.5D x 60W x 52H Centimeters), size suitable for 2-3 burner, 1000 m³/hr suction power suitable for medium to heavy frying and grilling Filter, with Push Button Control, efficient Dual LED Lamps & Double easy to clean Baffle Filter (Black), including necessary connection and point wiring and power socket, complete all as specified and directed. Make: Hindware Marvia brand or equivalent.

M&L for fixing stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. steel polishing/buffing of existing stainless steel railing and like components including application olive oil/ cleaning agents on microfibre cloth as polishing agent and buffing the surface with mechanical means to get smooth and glossy finished surface, complete all as specified and directed.

M&L for fixing stainless steel chain (Grade 316) having dia of links not less than 5 mm, short link, polished, Corrosion resistant and rust resistant, complete all as specified and directed.

S&F 25 mm thick PP interlocking floor mats of size 1 m x 1 m, best in quality, highly durable, anti Slip and scatch resistant for outdoor children play area, including necessary levelling and preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

S&F Aluminium Composite panels in all colours of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 2.5mm thermoplastic core of anti oxidant LDPE sandwitched between two sking of 0.25mm thick alloy sheet making a total sheet thickness of 3 mm. The surface shall be finished with PU base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/ stone/ masonry/RCC walls/framed structure with necessaary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with GI square pipe of size 25mm x 25mm with 1mm thickness in 600mm x 600mm size of grid including stainless steel screws, nut bolts, washers, cleats, weather silicon sealent for groove filling, backer rods etc, complete all as per manufacturer instrsuction and all as specified and as directed by Engr-in-Charge. All clamps and brackets shall be hot deep galvanised minimum 20 microns, (items include cost of GI frame, ACP Panels, Cramps, weather sealant, gasket, foam, fixtures, scaffolding, all machineries and any fastening strips, nuts, bolts, rivets, washers, etc., complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F 10 mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed/ fixed over PVC sheet fillet as in wall panelling, complete all as specified and directed by Engr-in-Charge.

Excavation in post holes (or similar holes) n. exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm, watering and securg surplus soil all as specified.

M & L cement concrete (1:3:6) type B-1 using 20mm graded stone aggt as in foundaton, filling, mass concrete and sub floors etc. complete all as specified.

S & Fixed stainless steel tube of 50mm dia (Grade-316) including welding, jointing complete all as specified and directed by Engr-in-Charge.

S & Fixed stainless steel tube of 40mm dia (Grade-316) including welding, jointing complete all as specified and directed by Engr-in-Charge.

S & Fixed stainless steel tube of 25mm dia (Grade-316) including welding, jointing complete all as specified and directed by Engr-in-Charge.

S & Fixed stainless steel section of 15mm x 6 mm (Grade-316) including welding, jointing complete all as specified and directed by Engr-in-Charge.

Supply, installation, hoisting and fixing in position of sign board made up of baked hardend alloy aluminium sheet 2 mm thick of any size and shape with cleat including necessary handing arrangement of stainless steel flat of suitable size all around and crossed complete all as specified and directed by Engr-in-Charge.

S & Fixed 3M™ High Intensity Prismatic retro-Reflective Sheeting Series 3930 of approved colour/ shade fixed on aluminium sheet fully covered including lattered, writing information/ logo with same sheeting computerised cut in any colour/ shade. The letters approximately covering upto 50% area of the board complete all as specified and directed by Engr-in-Charge.

S&F for Stainless steel grade 316), ornamental and intricate design framed work, with ends of bars shouldered and/or riveted, or forget into spikes;hold fast for steel gate and similar work including for portion framed and hung as gates with heavy holdfast including pintal hinges , stops, best quality sliding bolts including stainless welding (TIG welding/resistance welding steel welding, etc), complete all as specified and directed directed by Engr-in-Charge.

S&F Dotted one way vision decorative vinyl stickers, partially or fully-concealed and integrated with distinct patterns, gradients, and custom 3D designs for interior or exterior applications on door, windows and other glazing partition works, including fixing and necessary cutting and pattern formation, complete all as specified and directed by Engr-in-Charge.

S&F 19 mm thick Plywood, grade BWP, type BB fixed as in cup board, drawer, partitions etc., with screws to frame work, complete all as specified and directed.

S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

S&F S/S Door Hinges (Two-way) T15B, any-click System, Clip-on Soft-closing Furniture Cabinet suitable for 13/23 mm shutter, complete all as specified and directed by Engr-in-Charge.

S&F 150 mm Extruded brass handles, fabricated type polished/ chromium plated, fancy type, complete all as specified and directed.

S&F 100 mm Extruded brass handles, fabricated type polished/ chromium plated, fancy type, complete all as specified and directed.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer of approved shade all as specified and directed.

S&F 12 mm thick Toughned sliding Door/ partitions with patch fittings with cover plate of SS-304 Grade, fixing/ moving arrangement at top, sliding door fittings, roller plates suitable size as directed, Fin Connect Patch Lock etc in each door, including cutting holes in any size in floor and wall complete all as specified and as directed by Engineer-in-Charge.

M&L for Multi standard Copper Conductor cable of 1.0 Sqmm 3 Core size, drawn through HDPE or PVC conduit of size 25 mm dia inclusive of all tees, bends, elbows, reducers and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. for interconnection of cable light/looping box to light etc. all as specified directed. Make :- Polycab/RR Kable/Havells

S&F LED 6W, LED Panel Light (4000K), coated aluminium pressure Die-Cast housed in safe and with high illumination LED, including fixing arrangements etc complete all as specified and directed.

S&F LED 3W, up & down light, IP 65, coated aluminium pressure Die-Cast housed in safe and with high illumination out door wall light LED, including fixing arrangements etc complete all as specified and directed.

S&F LED Wall mounted fancy Light, Lamp base 1 x E27 type, 10 Watts LED Lamp with coated aluminium pressure Die-Cast housed in safe and with high illumination out door wall light LED, including fixing arrangements etc complete all as specified and directed.

S & F MCB DB 09 way SPN, PC (Polycarbonate), IP 65 “Weather proof” Concealed/ Surface mounted and making good the disturbed surfaces of walls/ceiling/floor etc. complete with all accessories, main switch and connecting the cables with proper all as specified and directed by Engineer in Charge. Make: Hensel or Equivalent from Hager

Supply and fixing of MCB SPN, 240 volt, 40 Amps complete all as specified. Make: Legrand/Havells/L&T

Supply and fixing of MCB SP, 240 volt, 6-32 Amps complete all as specified. Make: Legrand/Havells/L&T

S&F LED Picture Light 12W, Warm White 3000K with good Color rendering, complete all as specified and directed. Make: Philips -Model No: 31403 / or equivalent to Prisha /Surya / Osram /CG

S&F Wall mounted LED Lamp 8 W (3000K), Alluminium coated, pressure Die-Cas,t housed in safe and with high illumination, including fixing arrangements etc complete all as specified and directed. Make : Prisha, model No. PRO AERO SMALL or its equivalent in Wipro /Bajaj/Philips

Supply & Fixing, Outdoor type Special Purpose Speaker, 40W RMS, PA Garden Speakers, Rugged & beautiful green garden speaker which harmoniously merges with the outdoor garden environment, and water resistant polypropylene speakers. Strong aluminium alloy housing permits various outdoor applications Front Loudspeakers and including PCC 1:2:4 type B1 (20 mm graded aggregate) suitable size for mounting of light fitting including mounting pole with accessories not less than 1.2 Mtr height for fixing with anti-rusted nut & bolts etc required as per site all as spd and directed. (Make : AHUJA Model : GS-6401T or its equivalent ) Note: 1. Apply for single coat of suitable colour distempering for bollard foundation shall deemed to be included in the quoted rate.

Supply & Fixing USB player, with built-in MP3 Player & Digital Effects Compact and reliable professional PA Mixer which is aesthetically superior and easily portable.Upto four low impedance microphones and Line level signal sources can be connected in either balanced or unbalanced configuration, through a 6.3 mm (1/4”) stereo jack socket.Each channel has a GAIN control for optimum adjustment of the MIC & LINE input sensitivities. Active BASS & TREBLE controls in each channel for desired equalisation of the input signal. Separate FX (effects) level control for each input channel. MP3 digital player with recording, playback through USB & Bluetooth facility. Stereo input channel is provided with a GAIN control, 2 band EQ, FX & LEVEL Controls.Built-in digital effects processor with DELAY, REPEAT and LEVEL controls. Line level LEFT & RIGHT outputs through 6.3 mm (1/4”) stereo jack sockets.Individual SIGNAL & CLIP LEDs for optimum setting of signal levels.all as spd and directed. (Make : AHUJA Model : FMX-106DP or its equivalent ) Note: 1. Suitable cables for installation shall deemed to be included in the quoted rate.

Supply & Fixing, suitable for Item No 02, PA SUB-WOOFER SYSTEMS, PA Active sub-woofer designed for excellent low frequency reproduction in music programmed and other PA applications. Fitted with a heavy duty 30.48cm (12") speaker in a painted plywood cabinet, with black metal grille protection. can be driven by any standard mixer. Link/Loop through Output is provided to connect an additional Built in Clip Limiter, to guard against accidental overloading of the input. Volume Control, Ground Lift Switch and Phase Reversal Switch provided. High Pass output which can be used to drive the top speaker without any external Crossover. all as spd and directed. (Make : AHUJA Model : SUB-300A/ Yamaha Model No NS-SW300 or its equivalent ) Note: 1. wall mounted flatform for Amplifier shall deemed to be included in the quoted rate. 2. suitable cables for installation shall deemed to be included in the quoted rate.

Supply & Fixing, MICROPHONES, Attractive appearance, low cost PA microphone including Supplied with 3 mtrs to 4.5 mtrs. dedicated shielded cable with suatable phone plug etc., all as spd and directed. (Make : AHUJA Model : AUD Series or its equivalent )

M&L for Speaker cable/ of size 1.5 Sq mm 2 core, drawn through ISI Marked HDPE/PVC conduit of size 25 mm dia inclusive of all tees, bends, elbows, reducers and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. for interconnection of cable light/looping box to light etc. all as specified directed. Make :-Krystal/falcon/Finolex Note: 1. Conduit saddles & small excavation of cable in gardens deemed to be included in the quoted rate.

S&F Fancy ceiling/hanging LED fitting,Forged in the classical style from premium blown glass and steel, available in 5 head ceiling light in bronze. suitable for E 27, including LED Lamp 11 Watts E 27, including fixing arrangements etc complete all as specified and directed. Make : Philips Model No 37932 or its equivalent inWirpo /Bajaj/Prisha

S&F LED 40W (4000K) Matt Black & Extruded Sheet Alluminium coated, pressure Die-Cas,t housed in safe and with high illumination, including fixing arrangements etc complete all as specified and directed. Make : Prisha, model No. PRE HELIUM (SUSPENDED)or its equivalent inWipro /Bajaj/Philips

M&L for Multi standard Copper Conductor cable of 1.00 Sqmm 4 Core size, drawn through HDPE/PVC conduit of size 25 mm dia inclusive of all tees, bends, elbows, reducers and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. for interconnection of cable light/looping box to light etc. all as specified directed. Make :- Polycab/RR Kabel/Havells Note: 1. Conduit wall saddles & small excavation of cable in gardens deemed to be included in the quoted rate.

S & F MCB DB 04 way SPN, PC (Polycarbonate), IP 65 “Weather proof” Concealed/ Surface mounted and making good the disturbed surfaces of walls/ceiling/floor etc.including 04 Nos MCB's SP 6 Amp to 32 Amp, complete with all accessories, main switch and connecting the cables with proper all as specified and directed by Engineer in Charge. Conforming to Cat No - KV 6104 of Hensel or Equivalent from Hager

K K Construction Co

RAJ ENTERPRISE

K B N TRADERS

shree chamunda enterprise

OM ENTERPRISE