PROVISION OF APPROACH ROAD AND FOOT PATH UPTO DEMOLISION ACTIVIES AREA AT NAD ALWAYE

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Removing excavated material exceeding 250m but not exceeding 500m and depositing where directed.

Material & Labour for 150mm thick Soling (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and considered to required gradient and camber complete all as specified and directed.

Material & Labour for 100mm thick Cement concrete type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed.

Material & Labour for 80mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-40 Grade complete all as specified and directed.

Material & Labour for 50mm thick fine aggregate for laying paver block including spreading and levelling complete all as specified and directed.

Material & Labour for Cement concrete type B1 1:2:4 (20 mm graded aggregate) in kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Material & Labour for 20mm Screed bed or bedding in CM 1:6 for laying floor finishes complete all as specified and directed.

Material & Labour Chequered cement concrete tiles 20 cm x 20 cm x25 mm thick with gray cement pigment complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundation etc, or for shafts, wells, cesspits, manholes, pier holes, etc, not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and in hard dense soil complete all as specified and directed.

Material & Labour for PCC 1:4:8 type D2 40mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified and directed.

Material & Labour for Pre-cast cement concrete block masonry with solid blocks walling with using PCC block at 1:3:6 type C1 using 20mm graded stone aggregate set in CM 1:6 complete all as specified and directed.

Material & Labour for Precast RCC cover slabs for drain, man holes, shelves and similar artiles with plain faces including chamfers, weatherings,throating etc, and setting in cement mortar 1:6 complete all as specified and directed. Note: Reinforcement shall be measured and paid seperatly.

Material & Labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material & Labour for 20mm thick Granite work(of any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material & Labour for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even smooth without using extra cement complete all as specified and directed.

Material & Labour for two coat of cement based paint over a coat of alkali resistant primer paint including reparation of new plastered surface complete all as specified and directed.

Excavation over areas not exceeding 1.5 meter in hard/dense soil complete all as specified and directed.

Material & Labour for PCC type C2 1:3:6 (40mm graded aggregate) as in foundation complete all as specified and directed.

Material & Labour for PCC 1:2:4 type B1 (20mm graded aggregate) as in surface channel and drain, coping to drain etc, including all formwork etc, complete all as specified and directed.

Material & Labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc, complete all as specified and directed.

Material & Labour for 600mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M/S V B MOHAMMED ALI

M/s S & S Enterprises/ Suresh Shivasankarapillai

DJ Group