Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC KANIYATH HOUSE PO MATHILAKAM 680685 THRISSUR DT KERALA | MATHILAKAM | THRISSUR | KERALA | 680685 | ₹1.5 L | L1 | Accepted-AOC L1 |
| 2 | L2₹1.7 L+₹15,422.44 (10.1%)Rejected-AOC ERINJAD GRAMA PANCHAYATH | ₹1.7 L+₹15,422.44 (10.1%) | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | Ranjith T L2 | SATHYAN.K.B L1 |
|---|---|---|---|---|---|
| 1.00MAINTENANCE | |||||
| 1.00 | 10.6.3:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover | 6.5 | sqm | 3,409.54 ₹22,158.6 | 3,078.82 ₹20,009.25 Lowest |
| 1.00 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 32.08 | sqm | 1,745.32 ₹55,996.85 | 1,604.17 ₹51,468.19 Lowest |
| 1.00 | OD517322/2025-2026:Supplying and fixing 1HP motor pump including all materials and labour chagres etc complete | 1 | no | 13,403.77 ₹13,403.77 | 12,103.6 ₹12,103.6 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 107.1 | kg | 194.27 ₹20,806.32 | 175.43 ₹18,788.55 Lowest |
| 1.00 | 50.12.2.1:Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required. | 51 | sqm | 821.86 ₹41,914.86 | 742.14 ₹37,849.14 Lowest |
| 1.01 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.04 | cum | 1,13,059.42 ₹4,974.61 | 1,02,092.66 ₹4,492.08 Lowest |
| 1.01 | 50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters | 1.3 | sqm | 4,055.51 ₹5,272.16 | 3,662.12 ₹4,760.76 Lowest |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 16.38 | sqm | 164.86 ₹2,699.91 | 148.87 ₹2,438.04 Lowest |
| 1.01 | OD518659/2025-2026:Man mazdoor | 1 | each | 1,082.18 ₹1,082.18 | 977.21 ₹977.21 Lowest |
Tender Value
₹1.7 L
EMD Value
₹4,233
Closing Date
13 Mar 2026, 5:00 pmClosed
SONA O T
Assistant Engineer LIDEW Section Sreenarayanapuram GP
Sreenarayanapuram GP 2025-26 SC Samskarikanilayam Renovation Ward 2- S0066
2026_LSGD_844494_6
13/AE/LIDEW/SNP/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Santhipuram
Please refer tender documents
7 documents required · 7 mandatory
₹555
Yes
₹4,233
Yes
19 Aug 2026
6 Mar 2026
16 Mar 2026
6 Mar 2026
13 Mar 2026
6 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1MAINTENANCE | |||||
| 1.001 | 10.6.3:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover | 1 | sqm | - | - |
| 1.002 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | - | sqm | - | - |
| 1.003 | OD517322/2025-2026:Supplying and fixing 1HP motor pump including all materials and labour chagres etc complete | - | no | - | - |
| 1.004 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1 | kg | - | - |
| 1.005 | 50.12.2.1:Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required. | - | sqm | - | - |
| 1.006 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | - | cum | - | - |
| 1.007 | 50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters | - | sqm | - | - |
| 1.008 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 1 | sqm | - | - |
| 1.009 | OD518659/2025-2026:Man mazdoor | - | each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1425900.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.22 MB
66NITsamaska.pdf
Tender Documents • 0.03 MB
BOQ_1425900.xls
BOQ • 0.23 MB
66SBDsamska.pdf
Tender Documents • 1.65 MB
docmerged.pdf
Tender Documents • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .