Repairs to Executive engineer bungalow at Valsad (plastering waterproofing doors & window kitchen & Sanitation Furniture etc.)

Name of work :-

Repairs to Executive engineer bungalow at Valsad (plastering waterproofing, doors & window, kitchen &

Sanitation, Furniture etc.)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Dismentaling tiled of stone floors laid in mortar including stacking of 37.0 Sqm 48.21

serviceable materilas and disposal of unserviceable materials with all lead

2 Dismantling santtary fittings like wash basin . W.C. pan Indian and 7.00 No 405.65

European type, flushing tank etc. including stacking the materials with all

3 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 28.00 nos 187.71

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

4 Demolition of brick work and stone masonary including stacking of 7.96 Cu.mt 550.40

serviceable materials and disposal of unserviceable mateirals with all lead

and lift (ii) in cement mortar

5 Providing and layning water proofing treatment with china mosaic tiles 37.60 Sqm 6060.00

flooring over avg 50 mm C.C. 1:2:4 bedding for maintaining slope for plain

and curve surface & 12mm to 20mm of brocken piece of ceramic / glazed

tiles (one for more color as corected) to be iaid over cement mortar

bedding of CM 1:3 (1 cement : 3 send) contain one Kg of water proofing

materials per bag of OPC at plain or / and to be tempered to bring mortar

ceramic up to surface with using white cement and color pigment

including rounding of junctions and extending them up to 15 cm along the

wall and curing with bends any patens or design as per drawing and

cleaning by using oxalic acid etc complete.

6 Providing and fixing machine cut free edges, machine polished granite 30.31 Sqm 7272.00

stone slab 18 mm thick (single piece not more than 230 cm) for

doors/windows sill and jambs clading, Umbra as per design including full

molded round front edge and 1 cm nosing and laid on 20 mm thick

cement mortar 1:6 jointed with grey cement slurry including rubbing and

polishing finishing etc complete.

7 Brickwork using common burnt clay building bricks having crushing 13.42 Cu.mt 4379.21

strangth not less than 35kg/sq.cm in foundation and plinth in cement

Mortar 1:5 (1-Cement:5- fine sand)© Fly Ash Brick

8 20mm thick cement plaster on walls upto height 10 meters above ground 48.00 Sqm 300.66

level consisting 12 mm thick backing coat of C.M (1:3 ) and finishing coat

of C.M (1:1) etc complete.

9 Providing 20mm thick water proof cement plaster for sunk in single cost 19.00 Sqm 220.18

on brick / concerete wall for interior plastering up to floor two level

finished even and smooth (ii) cement mortar 1:3 (1 cement 3 sand) and

mixing waterproofing materials of approved brand and manufacture in

cement mortar in propotion recommended by the manufacturer for all

10 Providing and laying white glazed tiles 6mm thick in flooring treads of 7.32 Sqm 917.25

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement.

11 Providing & Fixing Wooden Flush Door of 36 mm door thickness and door 43.80 Sqm 6049.90

frame of 50 X 80 mm teakwood, door made of 28 mm thick BWP wooden

flush panel with 4.0 thick vineer laminated with teakwood lipping patti on

edges with melamine polishing, S. S. Door Hinges, S. S. Decorative Door

Handle, etc. complete with necessary fixtures and fasteners as per detail

drawing and as directed and approved by the Engineer in Charge.

12 Steel Work welded, in build up sections framed work including cutting, 4.94 Q 9047.86

hoisting fixing in position and applying a priming coat of red lead paint (A)

In beams and joints, channels, angles, tees, flats with connection plates or

angle cleats as in main and cross beams, hip and trussed purlins

connected to common rafters and the like.

13 Providng and fixing 6mm lexan polycarbonate sheet fixed with Hilti screw 36.55 Sqm 1441.90

and rubber silicon sealer and alluminium strip of size 50 X 3 mm etc

complete as directed by Engineer incharge.

14 Providing and fixing window having extruded aluminum Colour anodized 23.34 Sqm 3528.94

section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section

no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track member size

mm x 31.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of

Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of Jindal

Section no:8758 @ wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of Jindal

Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt)

with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window (Including MS grill

and one track(1/3)part of mosquto net shutter) etc complete

15 Providing and fixing standared extruded of alluminium section of size 0.81 Sqm 1290.81

63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605, @ Wt 1.094Kg / Rmt

with colour Powder Coated alluminium frame with 5 mm thick

transparent bronze colour tinted float glass with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details

etc complete for.window

16 Providing and fixing wsh down water closet (European type, W.C. Pan) 4.00 Each 1854.84

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately)(A) vitreous China Pattern :(i) in white

colour Providing and fixing G.I. inlet connection for flush pipe with W.C.

Pan Providing and fixing plastic seat and cover for wash down water

closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and

cover. Providing and fixing brass screw down stop tap.(A) 15mm dia.

17 Providing and fixing washbasin with single hole for pillar tap with C.I. or 4.00 No 2738.07

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets

fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (ii) 20mm dia.

Providing and fixing brass screw down stop tap.(A) 15mm dia.

Waste Pipe for Wash basin C.P. 32 mm dia

18 Providing and fixing cast iron (Spun) Nahni trap of the following nominal 4.00 No 606.08

diameter of self cleaning design with C.I. screaed down or higned grating

including cost of cutting and making good the walls and floor 100mm inlet

and 50mm outlet.(C) 100mm dia.

19 P & F Jet spray approved quality including fixtures etc complete. 4.00 No 1464.50

20 P & F cold and hot water mixer cock of approved quality including fixtures 2.00 No 6363.00

etc complete with warrenty.

21 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 4.00 No 282.16

22 Providing and fixing Gun metal check or non-return fullway wheel 4.00 No 420.63

valve.(C) 25mm dia.

23 Providing and fixing screw down bib taps of following size.(A) Brass screw 3.00 No 214.81

down bib tap polished bright. (ii) 20mm dia.

24 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 3.00 No 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

25 Providing and fixing concealed center point to wall ceiling & floor CPVC 90.00 Rmt 249.72

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [C]

26 Providing and fixing concealed center point to wall ceiling & floor CPVC 80.00 Rmt 205.00

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [B]

27 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 70.00 Rmt 336.24

pressure poluthene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(G)110 mm

28 Providing and fixing PVC water tank of approved quality 2000.00 litre 3.21

29 Constructing brick masonary for underground C.I Inspection chamber and 7.00 No 3660.76

bends with bricks having crushing stregth no less than 35 kg/cm2 in c:m

:5 C.I. cover with frame (light duty) 445 mm x 610 mm internal dimensions

total weight of cover with frame to be not less than 38 kg (wt. or cover

kg. and wt of frame 15 kg) R.C.C.top slab with 1:2:4 mix (1 Cement :2

coarese sand : 4 grade stone aggregate 20 mm size) foundation concrete

1:5:10 inside plaster 15 mm thick with cement mortar 1:3 finished smooth

with a floating conat of neat cement on walls and bed concerete etc.

(ii) Inside dimension 500 mm x 700 mm and 450 mm deep for pipe line

with one or two inlets.

30 Constructing Sandwitch Platform of polished Granite at top and 25 mm 3.12 Sqm 7514.40

thick kota stone slab using cement mortar 1:3 for sandwich and fitting at

bottom & edges with waterproof rigid adhesives including making

necessary grooves in walls with vertical kotastone 30 mm x 2 no sandwich

thick every 60 cm center to center with all labour material of approved

quality incl. full moulded round front edge fixed in wall for partition and

jointed with grey cement slurry including rubbing and polishing etc

complete including providing block board laminated drawers including

providing and fixing stainless steel storage baskets etc. complate.

31 Supplying & fixing kitchen sink glassy Asis - 304 grade 1 mm thick over all 1.00 Nos 8686.00

size 610 z 460 mm & bowl size 560 x 410 x 200 mm

32 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe 40.00 Nos 91.84

( SCH- 40) for cold water including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C

or shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

33 Providing and laying cement concrete 1:2:4(1-Cement:2 coarse sand 4- 4.80 Cu.mt 3683.34

graded stone aggregates 20 mm nominal siza) and curing complete

excluding cost of form work in (a) foundations and plinth

34 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) 32.00 Sqm 1397.83

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for antiskit (upto

35 Providing & fixing wooden Side Storege unit (Indipendent or wall 14.20 Sqm 15136.87

mounted) of nececcery size with using Top, Side, Self 19mm thick

plywood ISI Mark fixing with adhesive and nails with 6mm thick plywood

ISI Mark as per properly fixed with 1mm thick laminated sheets all

exposed wood to be finished with melamine polishingwork & colouework

etc complete or as directed.

36 Supplying wooden single Bed size 3'0" x 6' 6", made up of Teak wood 2.00 No 24240.00

framing, water proof ply wood Century made or equivalent with 1 mm

thick lamination of Century made or equivalent quality, design as per

Engineer In charge.

37 Supplying TV cabinate Table of latest morden design made up of Valsadi 1.00 No 27724.5

Teak wood with decorative board at back and laminated with sunmica

including necessary drawers in it as per Engineer In charge

38 Supplying Dining Table 6 Seater, made up of Valsadi Teak wood with Glass 1.00 No 45147.00

top, with6 nos chairs containing a good quality of wood polish decorative

design as per Engineer In charge.

39 Supplying T-poy made up of Valsadi Teak wood with Toughened Glass top, 2.00 No 11918.00

with Machine Poished, design as per Engineer In charge.

40 Supplying Hindola (Swing) with artistic carved Bethak made up of Valsadi 1.00 No 25401.50

Teak wood with Machine Poished, design as per Engineer In charge

including all mounting accecerries etc comp.

Rupees Sixteen Lakh One Thousand Six Hundred Sixty Six and Paisa Sixty Six only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1601666.66 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by Executive

Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to Tender.

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other Construction

works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated 9/12/2005

notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no GWA/2004-

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

(A) materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division