Renovation of tamarind easy hotel kollam supplyingand fixing kitchen equipment

Amount

civil works

od319353/2022_2023 Supplying BULK COOKING RANGE of O.A.S(80 X 80 X 50 CM) is fitted with One No.H.P Burner having 16G Stainless Steel 304 grade top panel, double bedded on all sides, having structural Stainless Steel angle frame control panel on the front, 18G spillage tray just below the burner, side panels (with air vents) of 20G Stainless Steel sheets, 16G Stainless Steel pipe legs with adjustable nylon bullets, 10cm clearance from the floor etc and complete.<br>

od319354/2022_2023 Supplying 3 BURNER RANGE of O.A.S(200 X 70 X 85 CM) having top panel, side panel and spill trays made of 16 G stainless steel sheets, two high pressure (T –35) chineese burners on eigther sides and one (G-35) burner in the centre, pigtails, stainless steel tube chinese grid, necessary tap over the burners, 16 G stainless steel legs wuth adjustable nylon bullets, 10 cm clearance from the floor etc and complete<br>

od319355/2022_2023 Supply and fixing 4 door freezer & chiller combi unit size 120x75x190 brand HOSHIZAKI model HRFW 127LS4 etc including all cost conveyance and placing charge etc completed

od319356/2022_2023 Supply and fixing COMMERCIALTILTING GRINDER of 15 lit capacity etc including all cost conveyance and placing charge etc completed

od319357/2022_2023 Supply and fixing BUTCHERY TABLE WITH SINK ,150x70x85 sizeone under shelf without sing, left side sink top sunken work leg using 1.5” squre tube bottom adjustable nylon boot back splash etc using 304 grade steel tube including all cost conveyance and placing charge etc completed

od319359/2022_2023 Supply and fixing DIRTY DISH LANDING TABLE WITH CHUTE size 120x100x85 under cross belt left side chute top sunken work leg using 1.5” squre tube bottom adjustable nylon boot back splash etc using 304 grade steel tube including all cost conveyance and placing charge etc completed

od319360/2022_2023 Supply and fixing PLATE RACK 3 TIRE work leg using 1.25” squre tube bottom adjustable nylon boot etc using 304 grade steel tube including all cost conveyance and placing charge etc completed

od319361/2022_2023 Supplying and fixing 4 Tier RACK of O.A.S having four stainless steel perforated racks of 18G stainless steel, double bedded on all sides,suitable stainless steel channels for under support, stainless steel square legs of cross section (40x40 mm), a minimum of 20cm floor clearance etc and complete

od319363/2022_2023 Supplying WORK TABLE with 8 inch splash back lengthwise of O.A.S(120 X 70 X 85 + 10 CM) with attachment of One under shelf.having 16G stainless steel top, 10cm splash back, 35x35x3mm thick stainless steel angle frame, with sound deadening, one 18G stainless steel under shelf, 16G stainless steel pipe legs with adjustable nylon bullets, 20cm clearance from the floor etc and complete

od319364/2022_2023 Supplying BAIN MARIE COUNTER of O.A.S( 180X70X85) CM) having 4 Nos of 0.5 and 1 no of 1/1 size vessels having one underself with sliding door, having thermostatically controlled heating elements, two over head racks with plate warmer on the bottom side of top shelf, shelf made of 18G stainless steel sheet, racks supported with 25mm stainless steel pipes, shelves with one 1/1 GN pans ie; rectangular vessel of size (53*32.5*15 cms) with lids and six nos of 1/2 GN pans i.e; rectangular vessels of size (32.5*26.5*15 cms) with lids having electric heater for chamber on the sides with controls on front side water inlet and out lets with control valves etc and complete

od319366/2022_2023 Supplying SS GARBAGE BIN WITH HINGED LID with 120 Litre Capacity. The cylindrical bin shall made of 304 grade stainless steel of 18G thickness. The base of the bin shall be fixed on a stainless steel ring of suitable thickness not less than 14G to have a ground clearence of 7.5cm for base. The bin shall have foldable handles on sides. All edges shall be rounded to avoid sharp edges and pleasent appearence. (The sample shall be got approved before effecting the full supply)<br>

od319372/2022_2023 Supplying and providing SS work table with size 4'x1 3/4'x 3' under shelf of 2 nos including all conveyance etc complete

od319376/2022_2023 Supplying and Providing work table with sink two under shelves and two over head shelf of size 150X70X85 and Sink size :15 X15 X10 inch

od319377/2022_2023 Supply and placing PICK UP COUNTER of size 150x60x85+45+30 two under shelf two over shelf three side covering leg using 304 grade 1.50 sqr tube bottom adjustable nylon boot including all cost conveyance and labour charges etc completed

od319380/2022_2023 Supply and placing Granite Hot plate dosa tawa one under shelf 16MS plate 95x60cm three side SS paneling with air ventilation front oil collecting tray, fire window, two number V type burner three side splash 15cm bottom adjustable nylon boot etc using 304 grade steel tube including all cost conveyance and placing charge etc completed

od319390/2022_2023 Supply and fixing Masala table one under shelf lrg using 1.5 inch square tube bottom adjustable nylon boot back splash etc using 304 grade steel tube including all cost conveyance and placing charge etc completed

od319392/2022_2023 10 Supply and fixing SS cupboard four tier three side SS covering with hanged door leg using 1.25” squre tube bottom adjustable nylon boot etc using 304 grade steel tube including all cost conveyance and placing charge etc completed

od319393/2022_2023 Supply and fixing JUICE TABLE with sink under cross belt RIGHT side sink top sunken work leg using 1.5” squre tube bottom adjustable nylon boot back splash etc using 304 grade steel tube including all cost conveyance and placing charge etc completed

od319394/2022_2023 Supply and fixing TEA TABLE WITH TWO BURNER one under shelf left side drain hole top tray type legs using 1.5” squre tube bottom adjustable nylon boot back splash etc using 304 grade steel tube including all cost conveyance and placing charge etc completed

od319402/2022_2023 Supplying and fixing trolley of size 110X60X(15+80)cm for kitchen and F&B Services

od319404/2022_2023 Supplying and fixing Thava (16mm MS plate) of size 110X75X80 cm for kitchen

od319407/2022_2023 Supplying and fixing 3 compartment sink of size 165x105x85cmfor dish wash

od319408/2022_2023 Supplying and fixing SS store rack (5 tier) of size 140X55X170cm

od319409/2022_2023 Supplying and fixing SS store rack (4 tier) of size 100X45X165cm

od326350/2022_2023 commercial coconut strapper

od343188/2022_2023 Hot plate of size 120x80x80+15 cm with plate size 100x65x1.6 cm,2 nos v burners,valves ,pig tail etc

Muskan Equipments Co.

masters equipments