Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.0 Craccepted-aoc | accepted-aoc |
Tender Value
₹1.0 Cr
EMD Value
₹1.1 L
Closing Date
4 Aug 2026, 4:30 pmClosed
SE (AM), Govt Of AP
Andhra Pradesh
Construction of 1No. of Covered Shed of size 40x29Mts in Market Yard, Ananthapuram of A.M.C, Ananthapuram in Ananthapuram District
964301
SE(AM)AP/GNT/Ep/04/12/2026-27, Dt.16-7-2026
OPEN - NCB
Civil Works
ANANTHAPUR
19 documents required · 19 mandatory
₹3,716
₹1.1 L
15 Oct 2026
21 Jul 2026
21 Jul 2026
Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.
Filling of foundations with 2.36 mm HBG chips and below from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.
P.C.C (1:4:8) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work
Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work
VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.
For Pedestals below GL
Providing High Yield Strength Deformed steel bars (Fe 500 -Lap slicing grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work.
Supply, fabrication & installation of Primary (Built-up) sections fabricated from hot rolled steel plates conforming to IS 2062 E-350 (or equivalent) with minimum yield strength of 345 MPa flanges are welded to the web by a continues single side fillet weld deposited by an automatic submerged are welding process. The built up frame shall be sweep blasted
Fabrication,supply and fixining of Z-Purlines including cost and conveyances of all materials,labour charges for welding and fixing charges including all incidental and operational charges etc., complete for finished item of work
Nuts & Bolts, Connection bolts and nuts Hot Rolled Sections
Roofing will be provided with 0.50 mm galvanized / pre painted GI profiled sheets fixied to the purlines with 14 size self drilling screws with neoprene washer. Side laps are swithched with self taping / drilling screws. End laps are to be cealed with 25/3 mm butyl tape. The sheets are provided with aniti capillary groove.
Fabrication of MS Brackets using MS angulars and other structureal steel work as per approved designs and drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes complete for finished item of works. For providing Drain network under Roof.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Covered shed No1.xlsx
TENDER_DOCUMENT • 0.50 MB
Tender Document Civil.doc
TENDER_DOCUMENT • 0.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .