CAD of LIS Takoli in GP Takoli LIS Jhiri in GP Jhiri and LIS Nagwain tehsil Aut Distt Mandi HP

Amount

Cutting in earth work in all kinds of soil such as pick work,jumper work,blasting work,chiselling in hard/soft rocks where blasting is prohibited and disposal of excavated earth upto all leads and lifts complete as per the entire satisfaction of the Engineer-in-charge.

Excavation in foundations trenches etc. (for pipes and pits ) upto all depths in all kinds of soil such as pick work,jumper work, blasting and chiselling soft/hard rocks where blasting is prohibited in all leads and lifts including trimming and dressing of sides levelling of bed to correct excavation and returning the stacked soil after laying jointing and testing of G.I.Pipes in trenches in 15 cm. layers including consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting/timbering and dewatering where ever required including restoration of un-metalled/metalled paved surface of its original conditions including cost of diversion for traffic night signals fixing caution boards and fencing etc.complete in all respects.

Providing and laying cement concrete 1:4:8(1cement:4 sand:8 crushed stone agg.40mm nominal size)and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:3:6(1cement:3 sand:6 crushed stone agg. 40mm nominal size)and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:5:10(1cement:5 sand:10 graded stone agg.40mm nominal size) with 15% plum and curing complete excluding cost of form work in retaining walls/breast walls,the size of plums shall usually be 150mm to 300mm as per HPPWD specifications in all leads and lifts.

Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4 crushed stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:-Walls ( any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level in all leads and lifts

Suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level in all leads and lifts.

Providing and laying cement concrete 1:1.5:3(1cement:1.5 sand:3 crushed stone agg.20mm nominal size )& curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:In foundation and plinth in all leads and lifts.

Walls ( any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level in all leads and lifts

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm, so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:-Vertical surfaces such as walls(any thickness)partitons and the like including attached pillasters,buttresses plinth and string courses and the like Columns,pillars posts and struts in all leads and lifts

Edges of slab and breaks in floors and walls under 20cm.wide in all leads and lifts.

Providing tor steel reinforcement for RCC work including bending,binding and placing in position compete upto floor two level in all leads and lifts.

Providing and Laying in trenches MS pipes as per ISO:3183 with all specials like Tees, Bends, Reducers, Nipples etc. (earth work to be measured and paid dor seperately) for Outlets and Scour pipe 100 mm dia in all leads and lifts ,4.00 mm thick.

Providing and Laying PVC pipe 10.00 kg/cm2 working pressure un plasticized ( confirming to IS 4985-1968) to make weep holes complete in R/Wall/ breast wall in all leads and lifts.

Providing and Fixing C.I. Sluice valve (with hand wheel) as per IS: 780 Class-I up to 300 mm dia (includingbrass spindle and as per IS: 2906 class II for diameters more than 300 mm complete with bolts, nuts , rubber insertion etc. (The tail pieces if rewuired shall be measured and paid for separately) for Out lets pipe & Scour pipes 100 mm dia in all leads and lifts.

Providing and Fixing RCC Chamber 80 mm dia hydrant including GI Riser pipe 80 mm PP valve, 80 mm pump connecting Nipple, GI tees Nipple & Coupler etc. in all leads and lifts.

Providing and Laying (to level or slope)and jointing and testing reinforced concrete pipe light duty non pressure pipes IS class of following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete in all leads and lifts.RCC Pipe 900 mm dia Class NP2

RCC Pipe 350 mm dia Class NP2

Providing & Fixing built-up section for theft protection frame etc. in all leads and lifts.

Providing and Fixing Tamper proof thimbled chain lock in all leads and lifts.

Providing and Fixing HDPE pipe Tee 100X90XX60 mm with equal end. In all leads and lifts.

Laying , jointing , testing and commissioning of HDPE pipes (High Density Polysthlene pipes) of following diameters and class confirming to IS 4984-1995 with necessary fitting to the entire satisfaction of Engineer-in-Charge (Earth work in trenches to be measured and paid for separately and in all leads and lifts HDPE pipes 180 mm dia PN 4.00, PE 80.

HDPE pipes 160 mm dia PN 4.00, PE 80.

HDPE pipes 140 mm dia PN 4.00, PE 80.

HDPE pipes 140 mm dia PN 6.00, PE 80.

HDPE pipes 125 mm dia PN 6.00, PE 80.

HDPE pipes 125 mm dia PN 4.00, PE 80.

HDPE pipes 110 mm dia PN 4.00, PE 80.

HDPE pipes 110 mm dia PN 6.00, PE 80.

HDPE pipes 110 mm dia PN 8.00, PE 80.

HDPE pipes 90mm dia PN 4.00, PE 80.

HDPE pipes 90 mm dia PN 6.00, PE 80.

ANKUSH SHARMA

LEGEND INDIA ENVIRONMENT PROTECTION PRIVATE LIMITED