Loading…
Loading…
Tender Value
₹7.4 Cr
EMD Value
₹5.2 L
Closing Date
25 Feb 2026, 3:00 pmClosed
Provision of EI buildings at 4 stations in the Sr.DEN-Central jurisdiction against the sanctioned work of Bhavnagar Division: Codal life based replacement of existing PI stations with EI, MSDAC & in built block working including Signalling & Telecom equipment at 19 stations.
266-2025-26
266-2025-26
Open
12 Months
Bhavnagar, Gujarat
₹0
₹5.2 L
2 Feb 2026
2 Feb 2026
11 Feb 2026
Item Breakup - 1-DSR-2023
approved quality with necessary screws etc. complete. 9.91 Providing and fixing chromium plated Each 19 151.05 2869.95 66 brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated 9.92 brass handles with necessary screws etc. complete: 67 9.92.1 125 mm Each 19 231.05 4389.95 68 9.92.2 100 mm Each 19 206.25 3918.75 BHAVNAGAR DIVISION-ENGG/WESTERN RLY ANODISED ALUMINIUM FITTINGS (ALL 9.95S FITTINGS SHALL BE ISI MARKED) Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS 9.96 : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 69 9.96.2 250x16 mm Each 19 260.6 4951.4 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS 9.97 : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 70 9.97.1 300x10 mm Each 19 130.1 2471.9 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) 9.100 transparent or dyed to required colour or shade, with necessary screws etc. complete : 71 9.100.1 125 mm Each 56 66.25 3710 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 9.101 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 72 9.101.1 Single rubber stopper Each 56 39.6 2217.6 9.105S GYPSUM BOARD PARTITIONS Providing and fixing magnetic catcher of approved quality in cupboard / ward robe 9.114 shutters, including fixing with necessary screws etc. complete. 73 9.114.1 Triple strip vertical type Each 29 52.5 1522.5 74 9.114.2 Double strip (horizontal type) Each 29 39.7 1151.3 9.116 Providing and fixing sliding arrangement in Each 29 20.4 591.6 racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E 75 aluminium channel section (The payment of C or E channel shall be made separately) 9.119 Providing and fixing factory made P.V.C. Metre 446.4 492.7 219941.28 door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be 76 reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in- Charge. BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet 9.120 out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 9.120.2 30 mm thick pre laminated PVC door Sqm .59 3663.8 2161.64 77 shutters 9.121 Providing and fixing Fiber Glass Reinforced Metre 446.4 570.95 254872.08 plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade 78 unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. Providing and fixing to existing door 9.122 frames. 9.122.1 30 mm thick Glass Fibre Reinforced Plastic Sqm 53.9 3720.75 200548.43 (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for 79 forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high 9.127 density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 80 9.127.2 1.0 mm thick Sqm 20.16 897.3 18089.57 Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable 9.166 full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge 81 9.166.1 18 mm thick Sqm 15.36 1362.3 20924.93 10.0 STEEL WORK 10.1S General 10.1 Structural steel work in single section, Kg 1644 117.35 192923.4 fixed with or without connecting plate, 82 including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2 Structural steel work riveted, bolted or Kg 302.4 133.7 40430.88 welded in built up sections, trusses and framed work, including cutting, hoisting, 83 fixing in position and applying a priming coat of approved steel primer all complete. Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, 10.16 fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 84 10.16.1 Hot finished welded type tubes Kg 302.4 194.4 58786.56 85 10.16.2 Hot finished seamless type tubes Kg 446.4 206.35 92114.64 10.16.3 Electric resistance or induction butt Kg 120 194.4 23328 86 welded tubes 10.19 Providing and fixing mild steel round Kg 28.8 97.2 2799.36 87 holding down bolts with nuts and washer plates complete. 10.20 Providing and fixing bolts including nuts Kg 29.76 159.35 4742.26 88 and washers complete. 10.21 Providing and fixing M.S. rivets of sizes in Kg 39.12 278.3 10887.1 89 position. Steel work welded in built up sections/ framed work, including cutting, hoisting, 10.25 fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.1 In stringers, treads, landings etc. of stair Kg 57.6 123.6 7119.36 90 cases, including use of chequered plate wherever required, all complete Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, 10.26 balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 91 10.26.1 M.S. tube Kg 55.2 196.8 10863.36 92 10.26.2 E.R.W. tubes Kg 67.2 205.75 13826.4 93 10.26.3 G.I. pipes Kg 156 203.05 31675.8 BHAVNAGAR DIVISION-ENGG/WESTERN RLY 10.28 Providing and fixing stainless steel ( Grade Kg 756 772.4 583934.4 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & 94 stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 11.0 FLOORING 11.1S General Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of 11.3 neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size Sqm 446.4 614.2 274178.88 95 stone aggregate 11.16S TILE FLOORING Chequered terrazzo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry 11.19 mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 96 11.19.4 Ordinary cement without any pigment Sqm 161.28 1379 222405.12 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali 11.21 resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 11.21.1 1:4 (1 acid proof cement : 4 coarse sand) 97 11.21.1.1 Acid and alkali resistant tile Sqm 105.84 1738.15 183965.8 In dado/skirting on 12 mm thick mortar 1:4 11.21.2 (1 acid proof cement : 4 coarse sand) 98 11.21.2.1 Acid and alkali resistant tile Sqm 95.76 1884.9 180498.02 11.26S KOTA STONE FLOORING Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with 11.26 pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 99 11.26.1 25 mm thick Sqm 302.4 1948.25 589150.8 11.27 Kota stone slabs 20 mm thick in risers of Sqm 140.16 2354.7 330034.75 steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 100 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 11.37S CERAMIC GLAZED TILES BHAVNAGAR DIVISION-ENGG/WESTERN RLY 11.37 Providing and laying Ceramic glazed floor Sqm 373.64 1096.55 409714.94 tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, 101 Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 11.41S VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved 11.41 make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 102 11.41.2 Size of Tile 600x600 mm Sqm 1267.2 1553.45 1968531.84 103 11.41.3 Size of Tile 800x800 mm Sqm 380.16 1885.5 716791.68 11.42 Deduct for not using 20 mm thick cement Sqm 2.4 -850.1 -2040.24 mortar 1:4 (1 cement : 4 coarse sand) 104 bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & 11.46 shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 105 11.46.2 Size of Tile 600x600 mm Sqm 307.36 1623.05 498860.65 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of 11.48 desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 106 11.48.3 Size of Tile 800x800 mm Sqm 48 244.75 11748 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement 11.55 : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 11.55.1 Flamed finish granite stone slab Jet Black, Sqm 38.4 3186.7 122369.28 107 Cherry Red, Elite Brown, Cat Eye or equivalent. BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) 11.56 thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab colour of Sqm 68.16 4481.3 305445.41 108 Black, Cherry/Ruby Red or equivalent 12.0 ROOFING 12.24S CEILING Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class 12.31 kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): 109 12.31.1 Flat surfaces Sqm 88.8 1718.95 152642.76 12.32 Extra for sunk or raised mouldings in the Sqm 42 607.45 25512.9 110 plaster of Paris (Gypsum anhydrous) ceiling. 12.37S RAIN WATER SPOUT AND PIPE Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including 12.41 jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 111 12.41.2 110 mm diameter Metre 514.8 377.4 194285.52 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC 12.42 rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.1 Coupler 112 12.42.1.2 110 mm Each 445 136.15 60586.75 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, 12.43 screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 113 12.43.2 110 mm Each 266 371.3 98765.8 BHAVNAGAR DIVISION-ENGG/WESTERN RLY 12.50 Providing and fixing precoated galvanised Sqm 71.04 738.65 52473.7 iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have 114 protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc 12.51 coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 115 12.51.1 Ridges plain (500 - 600mm) Metre 340.8 532.35 181424.88 BHAVNAGAR DIVISION-ENGG/WESTERN RLY 12.53 Providing and Fixing 15 mm thick densified Sqm 51.16 2158.15 110410.95 tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter 116 wall angle pre-coated steel of size 24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main 'T', bottom exposed with 24 mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 117 13.1.1 1:4 (1 cement: 4 fine sand) Sqm 2013.47 347.05 698774.76 118 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 3660.87 333.35 1220351.01 CEMENT PLASTER WITH A FLOATING COAT 13.7S OF NEAT CEMENT 12 mm cement plaster finished with a 13.7 floating coat of neat cement of mix : 119 13.7.2 1:4 (1 cement: 4 fine sand) Sqm 611.42 425.55 260189.78 13.20S PEBBLE DASH PLASTER 13.26 Providing and applying plaster of paris Sqm 4992.09 262.7 1311422.04 putty of 2 mm thickness over plastered 120 surface to prepare the surface even and smooth complete. 13.37S INTERIOR FINISHING Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of 13.41 approved manufacturer and of required shade and colour all complete to achieve even shade and colour : BHAVNAGAR DIVISION-ENGG/WESTERN RLY 13.41.1 New work (two or more coats) over and Sqm 3993.67 185.65 741424.84 including water thinnable priming coat 121 with cement primer having VOC content less than 50 gram/litre 13.44S EXTERIOR FINISHING Finishing walls with water proofing cement 13.44 paint of required shade : 13.44.1 New work (Two or more coats applied @ Sqm 192 116.9 22444.8 122 3.84 kg/10 sqm) Finishing walls with Acrylic Smooth 13.46 exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ Sqm 2396.2 160.6 384829.72 1.67 ltr/10 sqm over and including priming 123 coat of exterior primer applied @ 0.90 litre/10 sqm) Finishing with Deluxe Multi surface paint system for interiors and exteriors using 13.48 Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 998.41 193.7 193392.02 124 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.48.3 Painting Steel work with Deluxe Multi Sqm 302.4 170.7 51619.68 Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm 125 over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 126 13.61.1 Two or more coats on new work Sqm 604.8 155.9 94288.32 13.80 Providing and applying white cement Sqm 407.61 156.05 63607.54 based putty of average thickness 1 mm, of 127 approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ 13.81 litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 128 13.81.1 Old work (one or more coats) Sqm 6656.12 62.7 417338.72 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved 13.83 brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 129 13.83.2 Two coats Sqm 768 142.8 109670.4 13.91 Removing dry or oil bound distemper, Sqm 120 25.15 3018 water proofing cement paint and the like by scrapping, sand papering and 130 preparing the surface smooth including necessary repairs to scratches etc. complete. Painting with synthetic enamel paint of 13.99 approved brand and manufacture of required colour to give an even shade : 131 13.99.1 One or more coats on old work Sqm 48 102.8 4934.4 Varnishing with varnish of approved brand 13.113 and manufacture: BHAVNAGAR DIVISION-ENGG/WESTERN RLY 132 13.113.1 One or more coats with copal varnish Sqm 7.83 94.6 740.72 14.0 REPAIRS TO BUILDING 14.26S WOOD WORK Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass 14.28 brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 133 14.28.2 25 mm diameter. Metre 9.6 421.75 4048.8 15.0 DISMANTLING AND DEMOLISHING 15.1S General Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix cum 91.2 2434.25 222003.6 134 (including equivalent design mix) Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and 15.9 disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : 135 15.9.2 In cement mortar cum 82.8 2458.95 203601.06 Dismantling steel work in single sections 15.17 including dismembering and stacking within 50 metres lead in: 136 15.17.2 Channels, angles, tees and flats Kg 3000 2.3 6900 15.18 Dismantling steel work in built up sections Kg 1094.4 5.65 6183.36 in angles, tees, flats and channels including all gusset plates, bolts, nuts, 137 cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 15.19 Dismantling steel work manually/ by Kg 3751.2 3.85 14442.12 mechanical means in built up sections 138 without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. Dismantling tile work in floors and roofs 15.23 laid in cement mortar including stacking material within 50 metres lead. 139 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 42 73.4 3082.8 15.25 Dismantling stone slab flooring laid in Sqm 206.4 266.45 54995.28 cement mortar including stacking of 140 serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling roofing including ridges, hips, 15.28 valleys and gutters etc., and stacking the material within 50 metres lead of: 141 15.28.1 G.S. Sheet Sqm 306.36 164.95 50534.08 142 15.28.2 Asbestos Cement sheet Sqm 259.2 77.3 20036.16 15.60 Disposal of building rubbish / malba / cum 6.14 263.95 1620.65 similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to 143 approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 16.0 ROAD WORK 16.1S ROADS 16.3 Supplying and stacking at site. BHAVNAGAR DIVISION-ENGG/WESTERN RLY 144 16.3.2 63 mm to 45 mm size stone aggregate cum 828 1636.05 1354649.4 145 16.3.3 53 mm to 22.4 mm size stone aggregate cum 350.4 1842.3 645541.92 146 16.3.10 Moorum cum 1094.4 768.25 840772.8 16.4 Laying, spreading and compacting stone cum 1590.96 1046.95 1665655.57 aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in 147 stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . 16.49S MISCELLANEOUS 16.68 Providing and laying 60mm thick factory Sqm 1418.4 972 1378684.8 made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & 148 shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 16.90 Providing and laying tactile tile (for vision Sqm 86.4 2017.6 174320.64 impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals 149 location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, 16.91 compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer- in-Charge. 16.91.1 60mm thick cement concrete paver block Sqm 1384.08 1045.65 1447263.25 150 of M-35 grade with approved colour, design & pattern. 17.0 SANITARY INSTALLATIONS 17.1S General BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including 17.1 flush pipe, with manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. Each 9 6767.4 60906.6 151 pan of size 580x440 mm with integral type foot rests Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually 17.2 controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid Each 5 6515.55 32577.75 152 plastic seat and lid Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard 17.4 flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 One urinal basin with 5 litre white P.V.C. Each 9 6258.75 56328.75 153 automatic flushing cistern Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, 17.7 including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.2 White Vitreous China Wash basin size Each 9 2226.35 20037.15 154 630x450 mm with a single 15 mm C.P. brass pillar tap 17.22B Providing and fixing CP Brass Single lever Each 4 6940.75 27763 telephonic wall mixer of quality and make 155 as approved by Engineer in charge.(a) 15 mm nominal dia 17.23 Providing and fixing white vitreous china Each 4 1648.95 6595.8 flat back or wall corner type lipped front 156 urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. Providing and fixing P.V.C. waste pipe for 17.28 sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 157 17.28.2.2 40 mm dia Each 20 119.55 2391 17.29 Providing and fixing 100 mm sand cast Each 4 53.25 213 158 Iron grating for gully trap. 17.31 Providing and fixing 600x450 mm bevelled Each 15 1607.95 24119.25 edge mirror of superior glass (of approved 159 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 17.34 Providing and fixing toilet paper holder : 160 17.34.1 C.P. brass Each 39 803.7 31344.3 BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing soil, waste and vent 17.35 pipes : 17.35.2 75 mm diameter : 161 17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 Metre 50.4 1044.75 52655.4 Providing and fixing trap of self cleansing design with screwed down or hinged 17.60 grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.60.2 100 mm inlet and 75 mm outlet 162 17.60.2.1 Sand cast iron S&S as per IS - 3989 Each 4 1975.15 7900.6 Providing and fixing PTMT Waste Coupling 17.69 for wash basin and sink, of approved quality and colour. 17.69.1 Waste coupling 31 mm dia of 79 mm Each 4 115.3 461.2 163 length and 62mm breadth weighing not less than 45 gms Providing and fixing PTMT Bottle Trap for 17.70 Wash basin and sink. 17.70.1 Bottle trap 31mm single piece moulded Each 4 367.1 1468.4 with height of 270 mm, effective length of tail pipe 260 mm from the centre of the 164 waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 17.71 Providing and fixing PTMT liquid soap Each 15 168.35 2525.25 container 109 mm wide, 125 mm high and 112 mm distance from wall of standard 165 shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 17.72 Providing and fixing PTMT towel ring Each 15 231.95 3479.25 trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm 166 from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden 17.73 cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of Each 15 708.95 10634.25 645 mm, width 78 mm and effective 167 height of 88 mm, weighing not less than 190 gms. 17.74 Providing and fixing PTMT shelf 440 mm Each 15 713.2 10698 long, 124 mm width and 36 mm height of 168 approved quality and colour, weighing not less than 300 gms. 17.81 Providing and fixing floor mounted, white Each 4 18212.9 72851.6 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual 169 flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 18.7 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 170 18.7.2 20 mm nominal dia Pipes Metre 7.68 335 2572.8 171 18.7.3 25 mm nominal dia Pipes Metre 7.68 401.55 3083.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 172 18.8.2 20 mm nominal dia Pipes Metre 150 537.6 80640 173 18.8.3 25 mm nominal dia Pipes Metre 150 627.25 94087.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded 18.9 fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 174 18.9.1 15 mm nominal dia Pipes Metre 86.4 244.7 21142.08 175 18.9.2 20 mm nominal dia Pipes Metre 86.4 274.3 23699.52 176 18.9.3 25 mm nominal dia Pipes Metre 76.8 355.4 27294.72 177 18.9.5 40 mm nominal dia Pipes Metre 76.8 563.05 43242.24 178 18.9.6 50 mm nominal dia Pipes Metre 86.4 794.25 68623.2 179 18.9.8 80 mm nominal dia Pipes Metre 124.8 2166.35 270360.48 180 18.9.9 100 mm nominal dia Pipes Metre 69.6 3271.7 227710.32 Making connection of G.I. distribution branch with G.I. main of following sizes by 18.13 providing and fixing tee, including cutting and threading the pipe etc. complete : 181 18.13.1 25 to 40 mm nominal bore Each 57 911.9 51978.3 182 18.13.2 50 to 80 mm nominal bore Each 57 1785.35 101764.95 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 183 18.15.1 15 mm nominal bore Each 20 353.25 7065 184 18.15.2 20 mm nominal bore Each 20 379.2 7584 Providing and fixing brass stop cock of 18.16 approved quality : 185 18.16.1 15 mm nominal bore Each 5 353.25 1766.25 Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 186 18.17.1 25 mm nominal bore Each 20 622.4 12448 187 18.17.3 40 mm nominal bore Each 20 826.1 16522 188 18.17.4 50 mm nominal bore Each 20 1026.65 20533 BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 189 18.18.1 15 mm nominal bore Each 29 406.85 11798.65 190 18.18.2 20 mm nominal bore Each 29 462.5 13412.5 191 18.18.3 25 mm nominal bore Each 29 464.05 13457.45 Providing and fixing gun metal non- return 18.19 valve of approved quality (screwed end) : 18.19.1 25 mm nominal bore 192 18.19.1.1 Horizontal Each 2 591.4 1182.8 Providing and fixing C.P. brass shower 18.22 rose with 15 or 20 mm inlet 193 18.22.1 100 mm diameter Each 2 193.95 387.9 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all Per Litre 40320 11 443520 floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and 194 suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 195 18.49.1 15 mm nominal bore Each 29 506.8 14697.2 Providing and fixing C.P. brass long body bib cock of approved quality conforming to 18.51 IS standards and weighing not less than 690 gms. 196 18.51.1 15 mm nominal bore Each 4 798.95 3195.8 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 197 18.52.1 15 mm nominal bore Each 29 670.45 19443.05 Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 198 18.53.1 15mm nominal bore Each 29 574.3 16654.7 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, Each 9 125.6 1130.4 199 weighing not less than 88 gms Providing and fixing PTMT stop cock of 18.55 approved quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, Each 9 118.5 1066.5 200 weighing not less than 88 gms Providing and fixing PTMT pillar cock of 18.56 approved quality and colour. 18.56.1 15 mm nominal bore, 107 mm long, Each 9 208.45 1876.05 201 weighing not less than 110 gms 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT Ball cock of approved quality, colour and make 18.62 complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.3 25 mm nominal bore, 152mm long, Each 39 523.8 20428.2 202 weighing not less than 440 gms BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 18.90 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90 degree 203 18.90.2 For 22.22 mm outer dia pipe Each 29 113.8 3300.2 204 18.90.3 For 28.58 mm outer dia pipe Each 29 163.6 4744.4 205 18.90.6 For 48.60 mm outer dia pipe Each 29 273.15 7921.35 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 18.92 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Equal Tee 206 18.92.2 For 22.22 mm outer dia pipe Each 29 300.2 8705.8 207 18.92.3 For 28.58 mm outer dia pipe Each 29 466.6 13531.4 208 18.92.6 For 48.60 mm outer dia pipe Each 29 1429.75 41462.75 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 209 19.1.2 150 mm diameter Metre 115.2 695.8 80156.16 210 19.1.5 300 mm diameter Metre 156 2064.15 322007.4 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 19.2 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 211 19.2.2 150 mm diameter S.W. pipe Metre 235.2 1179.85 277500.72 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar 19.6 in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 212 19.6.4 300 mm dia. R.C.C. pipe Metre 756 994.3 751690.8 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene 21.1 gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion BHAVNAGAR DIVISION-ENGG/WESTERN RLY 21.1.1.1 Anodised aluminium (anodised Kg 143.39 495.05 70985.22 transparent or dyed to required shade 213 according to IS: 1868, Minimum anodic coating of grade AC 15) 21.1.1.2 Powder coated aluminium (minimum Kg 335.52 530.9 178127.57 214 thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for 21.1.2 fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised Kg 497.48 598.6 297791.53 transparent or dyed to required shade 215 according to IS: 1868, Minimum anodic coating of grade AC 15) 21.1.2.2 Powder coated aluminium (minimum Kg 566.99 634.45 359726.81 216 thickness of powder coating 50 micron) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in 21.2 panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.2 Pre-laminated particle board with Sqm 122.3 1115.4 136413.42 217 decorative lamination on both sides Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / 21.3 neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 224.64 1176.8 264356.35 218 (weight not less than 10kg/sqm) 22.0 WATER PROOFING 22.1S General 22.6 Providing and laying water proofing Sqm 435.12 688.9 299754.17 treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than10 cm. (c) third layer of 1.5 mm thickness consisting of 219 slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. 26.0 NEW TECHNOLOGIES AND MATERIALS 26.41S NEW TECHNOLOGY ITEMS BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and laying factory made Precast concrete solid blocks of 200 mm thickness 26.68 of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: 26.68.1 Cement mortar 1:6 (1 cement : 6 coarse cum 419.86 7387.25 3101610.79 220 sand) Providing and laying factory made Precast concrete solid blocks of 200 mm thickness 26.69 of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level 26.69.1 Cement mortar 1:6 (1 cement : 6 coarse cum 1378.6 9844.65 13571834.49 221 sand) Total 105095109.95
Item Breakup - 2-USSOR-2021
JCB Backhoe Loaders 3DX Plus or similar Hour with minimum 1.10 cum bucket capacity
Hydra or similar tyre mounted Pick-n-Carry Hour crane of 12T capacity for misc. works of handling of material
Tractor with Trolley for local transportation Hour or other misc. works. Total 332309.80
Item Breakup - 3-NS- Electric
NS/1 SETC of concealed wiring light/fan/exhaust fan/call bell point.
NS/2 SETC of concealed wiring of sub-main Metre with 4 sq mm copper wire in PVC conduit.
NS/3 SETC of PVC Switch board of suitable Numbers size having 16/6 A 6 pin plug socket with 16 A switch as per Specification.
NS/4 SETC of modular type electronic fan Numbers regulator as per specification.
NS/5 SETC of Energy Efficient BLDC celling Numbers fan of 1200 MM sweep & all other Accessories as per specification
NS/6 SETC of 250mm sweep exhaust fan Numbers complete with required hardware for mounting of fan and connection of fan should be made by 1.5sq mm 3 core flexible copper cable as per specification
NS/7 SETC of 18/20 W LED tube light Numbers fittings 4' length complete with LED tube etc. as per specification
NS/8 SETC of plug point 20 Amp with 20 A Numbers DP MCB in metal enclosure as per specification.
NS/9 Supply .Installation, Testing and Numbers Commissioning of incoming 32 Amp DP MCB & outgoing 4x16 Amp DP MCB with enclosure and wiring as per specification BHAVNAGAR DIVISION-ENGG/WESTERN RLY
NS/10 SITC of Single phase RCBO of 32 A Numbers capacity, 30 mA senility with metal enclosure as per specification.
NS/11 Supply .Installation, Testing and Numbers Commissioning of 125 Amp FP MCCB microprocessor based as incoming & 2x63 Amp FP MCB AND 6x20 A MCB DP as outgoing with ammeter, voltmeter, indicator lamp etc in enclosure and wiring as per specification
NS/12 SETC of 5 mtr galvanized double Numbers arm octagonal pole with 130mm bottom and 70mm top made up of 3mm thick steel along with base plate size of 200x200x12 mm with foundation.
NS/13 SETC of LED street light 35-45 w Numbers fitting complete with all accessories etc. as per specification.
NS/14 SETC of 5 star and above rating Numbers Split Air conditioner 1.5 tone capacity inverter Model as per Specification.
NS/15 SETC of Digital timers witch for Numbers setting on and off two air conditioners alternatively.
NS/16 SETC of GI pipe earthing IS 3043 - Numbers 1987 as per specification.
NS/17 Digging and excavation of trench Metre 450 x 1000 mm in RCC/PCC/Hard Soil for cable and refilling etc as per specification
NS/18 Transportation & laying of cable in Metre existing trench as per specification.
NS/19 Supply of 4 core 16 mmsq armored Metre XLPE aluminum cable IS-7098 for LED light fittings.
NS/20 Supply of 4 core 95 mmsq armored Metre XLPE aluminum cable IS-7098
NS/21 SETC of MDB consisting Incoming Numbers 2x63Amp 4 pole MCB and outgoing 10x20A DP MCB as per specification. Total 1882841.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecialConditionsforthework.pdf.pdf
ATTACHMENT
GCCApril2022ACS1to10.pdf
ATTACHMENT
ListofLocations.pdf.pdf
ATTACHMENT
SafetyatWorkSiteLatest18-07-2025.pdf.pdf
ATTACHMENT
JointProcedurefordiggingwork.pdf.pdf
ATTACHMENT
RBcircularforDiggingwork.pdf.pdf
ATTACHMENT
PCECircular88forQualityofWorks.pdf.pdf
ATTACHMENT
EIBuildingSpecialCondition.pdf
ATTACHMENT
Download all tender documents and submit your bid