Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹82,206Accepted-AOC GROUND FLOOR THAKUR COMPLEX BASANTPUR | BASANTPUR | SHIMLA | HIMACHAL PRADESH | 171018 | ₹82,206 Quoted ₹1.5 L | L1 | Accepted-AOC Award |
| 2 | L2₹1.6 L+₹7,223.40 (4.80%)Rejected-Finance | ₹1.6 L+₹7,223.40 (4.80%) | L2 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | Rupesh kumar L2 | RAKESH KUMAR L1 |
|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. | 54.17 | Cum | 420 ₹22,751.4 | 400 ₹21,668 Lowest |
| 2.00 | Repair and maintenance of Rising Main by cutting and welding of GI pipe diameter mentioned below ie. By buttwelding and Gas welding two layers including cost of cutting of GI pipe and carriage of welding set and DG set by Machanical transport and head lead up & down complete job in all respect and to entire satsfection of Engineer -in-Charge in all leads and lifts. 65 mm dia | 60 | Joints | 550 ₹33,000 | 520 ₹31,200 Lowest |
| 2.01 | 80mm diameter | 47 | Joints | 620 ₹29,140 | 600 ₹28,200 Lowest |
| 3.00 | Providing manufecturing laying and jointing of GI bend of diameters mentioned below (Heavy duty) of required degree confirming to relevent IS specification with up to date amendments having wall thickness mentioned below. The joint shall be jointed with circumfrancial butt welding joints by electrical welding in requsite number of weld run so as to achive the minimum effective thorat thickness and strenth of weld confirming to IS-816-1969 spacification, by using welding electorods of 2.50 mm to 6.30 mm of advani oerlication (Ador) /CITOJET/Esab make , confirming to 814-1991 , at site of work complete job in respect and to the entire satisfaction of Engineer-in-Charge in all leads and lifts.65 mm dia | 18 | Bends | 2,000 ₹36,000 | 1,900 ₹34,200 Lowest |
| 3.01 | 80mm diameter (MC) | 16 | Bends | 2,300 ₹36,800 | 2,200 ₹35,200 Lowest |
Tender Value
₹1.4 L
EMD Value
₹2,900
Closing Date
14 Jul 2025, 10:00 amClosed
Executive Engineer
EE JSV Mandi
Repair and maintenance to LWSS Kathwari in between 1st stage to 2nd stage by cutting welding and testing of Old GI pipe Rising main 80mm dia Gravity main 65mm dia at Sadyana various RDs under Jal Shakti Section Dhanyari
2025_HPIPH_109361_1
3496-3535
Open Tender
Pipe Laying Works
Item Rate
90 days
Kathyari
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹2,900
26 Oct 2025
3 Jul 2025
14 Jul 2025
3 Jul 2025
14 Jul 2025
3 Jul 2025
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .