UT-01-149 Construction of Basolikhan-Chamtola to Nayal Dhura Motor Road, under PMGSY stage -I Phase XIX (WB)

Amount

Earth work in hill road (hill side cutting): Excavation in Hilly area for Construction of road in all types of Soils,Rocks and E&Betc. As met at site, true to lines as per Plan ,L-section,Cross Slope,Super Elevation as required,also including uprooting & cutting of bushes,dressing of road surface to the required level and slopes with all Lifts & Leads required for safe disposal of surplus excavated material at suitale dumping places indicated in drawing by mechanical means/manual means and including construction of required cooliee walling for retaining the muck, without otherwise damaging the Forest, Forest Land, Utilities,Private and Public Properties, including Slip Clearance till the Completion of the work as directed by Engineer-in-Charge as per MORD Specification Clause 1601,1602&1603.

Construction of Hill side Kutcha Trapezoidal drain as per drawing (Top 0.60m, Bottom 0.30m & Height 0.40 to 0.60m as per site) in accordance with the requirement as directed by Engineer-in-charge and MORD Specification Clause 1606.1

Excavation in foundation for structures in all types of soils and rocks including lead, lift and disposal of surplus material as directed by Engineer-in-charge and MORD specification clause 305

X-Drainage/Drainage structure

Construction of R. R . stone masonary in cement mortar 1:5 including supply of all materials,labour,t&p&royaltyetc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 700 &1604.

X-Drainage/Drainage structure

Petty works like perapet etc.

Construction of R. R . stone masonary laid dry including supply of all materials, labour,t&p&royaltyetc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 700 &1604.

X-Drainage/Drainage structure

Coolie walling including supply of all material, labour, T&P etc. required for proper completion of the work , as directed by Engineer-in-charge and PWD specifications 8.90

HP stone filling in back of structures including supply of all material, labour, T&P etc. required for proper completion as directed by Engineer-in-charge and MORD specification clause 1604.7)

X-Drainage/Drainage structure

Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally)including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each (crate size 3.00m * 1.50m* 1.25m) as directed by Engineer-in-charge and MORD specification 1301 .

Providing weep holes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC/PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards face complete as directed by Engineer-in-charge and MORD specification Clauses1206.6.

Providing and laying of concrete for plain/reinforced concrete in open foundations for structures including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 800 , 1202 & 1203 for P.C.C grade M 10. Nominal mix 1:3:6 .

X-Drainage/Drainage struucture

Providing and laying of concrete for plain/reinforced concrete for structures including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 800 for P.C.C grade M 20. Nominal mix 1:2:4 .

Coping of parapet

Providing and laying of concrete for plain/reinforced concrete for structures including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 800 for R.C.C grade M 25

Sub Structure

Super Structure

Providing and laying of concrete for plain/reinforced concrete for structures including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 800 for P.C.C grade M 25.

X-drainage work

Pointing with cement mortar 1:3 including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clauses No.613.3

15 mm thick Plastering with cement mortar 1:6 including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clauses No.613.4

Supplying, cutting , and placing of HYSD bar reinforcement in substructure/superstructure complete (IS1786:2008 clause no. 1.6) Steel shall not be from rerolling plants and shall conform to relevent IS Code including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge as per MORD specification no. 1000

Substructure

Super structure

Drainage spouts complete as per drawing and technical specifications Clause 1209

CR Stone masonry in 1:4 cement/sand mortar for abutment of minor bridges, culverts etc. including all material, labour, T&P etc. required for proper completion of work as directed by Engineer in charge. technical Specification Clause-702, 704, 1202 and 1204 of MORD.

CR Stone masonry in 1:5 cement/sand mortar for abutment of minor bridges, culverts etc. including all material labour T&P etc. required for proper completion of work as directed by Engineer in charge.technical Specification Clause- 702, 704, 1202 and 1204 of MORD.

Providing and fixing in position pipe railing consisting of IS Rolled steel joist posts designation IS MB 100 (100x75) at 2.5 m interval and three rows of 50 mm dia steel pipes (light) including fixing in position on bridge deck complete as per drawing and technical specifications Clause 1208.2

Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction

Reinforced cement concrete M15 grade kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing , directed by Engineer-in-charge and MORD Specification Clause 1703. KM Stone (Precast)

KM Stone (Precast)

Same as above 5th Kilometer Stone (precast)

Same as above 200 m stone (precast)

Providing & fixing of PMGSY Logo Board at starting point, as per attached standard drawing duly painted and written and as directed by Engineer in charge. as per MORD specification Clause 1701

Providing & fixing of PMGSY Logo Board at end point and every 2 Km distance of road length as per attached standard drawing duly painted and written as per MoRD specification and direction by Engineer in charge.

Providing fixing of Title Information Board with PMGSY Logo at suitable place in the starting of the road as per attached standard drawing duly painted and written as directed by Engineer in charge. as per MORD specification Clause 1701 .

Providing & fixing of Citizen Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per attached standard drawing dully painted and written as directed by Engineer in charge. as per MORD specification Clause 1701 .

Providing & fixing of Semi reflective Traffic Sign Boards (cautionary, mandatory & informatory) as per attached drawing duly painted and written as per the MoRD specification and as directed by Engineer-in-charge.

Providing & fixing of Semi reflective Direction and Place Identification sign boards up to 0.90 square meter size as per attached drawing and as per the MoRD specification and as directed by Engineer-in-charge.Technical Specification Clause 1701

Providing & fixing of Semi reflective Direction and Place Identification sign boards above board size greater than 0.90 sqm.Technical Specification Clause 1701

Providing & fixing of Maintenance Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per standard drawing dully painted and written as directed by Engineer in charge/ as per IRC/ MORD Specification

White washing of parapet walls of CD work and tree truncks White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915

Providing and fixing of C.C. edge stone 12 cm X 12 cmX 60 cm Size in M-15 Cement Concrete With 4 nos. 8mm dia HYSD vertcal bars and 3 nos. 6mm dia MS bar Strrups as per approved Drawing including 2 coat White washing on valley side of formation as directed by Engineer-in-Charge and MORD specfication for Rural Roads 2014.

Maintenance Activities:

Deploying Hydrolic of 0.90 cum bucket for clerance of major slip in all type of soil rock and boulders including its operator fuel all other charge and taxes requierd for proper completion of work

Ist year

IInd year

Major slip clearance in all type of soil ,rock and boulders including cast of all materials ,machine ,t&p and taxes etc required for proper completion of work as per MORD specification

Ist year

IInd year

Random Rubble dry stone masonary in Coolie walling for edge/ filling protection / retain debrics in valley side including supply of all material labour T&P etc as per drawing required for proper completion of work as directed by Engineer in charge.(for opening comunication only)

Ist year

IInd year

Providing and laying of boulder apron laid in wire crates of 3.00 X 1.50 X 1.25 meter size with 4mm dia G.I. Wire conforming to IS : 280 & IS : 4826 in 100mm x 100mm mesh (woven diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 25 Kg each as per drawing and technical specification 1301.4.3 of MoRD and as directed by Engineer in charge.

Ist year

IInd year

PBMC Maintenance

Maintenance under PBMC for 1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 2] Maintenance of road side Drains including minor slip clearence , reshaping ,deepening and ,regrading ,as well as catch water drains as per technical specification Clause 1907. 3]Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus material in approved muck disposal points as per specification clause 1903 . 4] Maintenance of scuppers & Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908. 5] Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909. 6] Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910. 7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912. 8] Two coat white washing on parapet walls of CD work ,edge stones, tree truncks, and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191.

Ist year

IInd year

Salam Construction

M/s Parwatiya Construction

G. S. Matiyani And Sons

Shri girdhar singh adhikari