REPAIRS AND PAINTING TO STEEL FURNITURES OF VARIOUS UNTIS OTM AND MD ACCNS UNDER GE NW KOCHI

Amount

Notes:- 1. The contractor must be adhered to the quality ,quantity and approved materials in original ,if any deviations found at any stage of the contract without proper approval of the competent authority ,he is liable to pay penality for the differences/deviations 2. The shifting of manpower and material and obtaining entry pass and exit will be the sole responsibility of the contractor/his supervisor with his work permit. 3. The Contractor shall employ at his own expense, a supervisor possessing requisite qualification and he shall be availbale at site all days and throughout the Contract period failing which, the Contractor shall liable to pay penality as per terms and Conditions of IAFW-2249 forming part of Contract. 4. The workers engaged should be skilled labour, shall be aware of using latest technology and with respect to all sort of latest machinery/equipments who is able to perform all related tasks assigned as per contract. 5. The Contractor shall submit samples as per CA after placing the work order and start the work immediately as per the direction of Engineer in Charge 6. The painting of steel articles must be done through proper spray painting (the colour of the paint shall be as per the direction of GE or Engineer in Charge) on primer coat and the surface should be clear and smooth as directed by Engr-in-charge

Dismantling/removing the U/S or serviceable ply top from GI pipe charpoy and dismantle the frame completely, replace the broken/unserviceable parts with new ones, reassembling the charpoy frame completely in all respects by inserting/screwing in the existing/replaced long/short rails and legs inside the 3 way elbow 32 mm duly tightened with check nuts and re fixing the serviceable ply wood removed from the existing charoy and keep the frame ready completely all as directed by Engineer-in-Charge. Notes :- (i) New parts required shall be measured and paid separately as supply only (ii) Quoted rate is inclusive of labour element for providing new parts.

Supply only new long rail, 1880mm long, 32mm dia, medium grade GI, Class 'B' conforming to IS-1239 (pt1) of 1979 having threaded portions 22mm long, on each end.

Fabrication/making of short rail, 800mm long, threaded 22mm for both ends made out of long rail obtained from item No 2 above all as directed by the Engineer-in-Charge.

Fabrication/making of leg, 375mm long, duly threaded on top end up to 22mm made out of short/long rail obtained from item No.3. above including provn of FI clamps for fixing hard wooden block plugs at bottom as required all as directed by the Engineer-in-Charge.

Removal of one serviceable leg from GI pipe charpoy with ply top without disturbing the charpoy frame and removing the existing wooden block along with screw levelling/plaining by cutting/scraping the bottom of leg to make charpoy symmetrically horizontal and refix the removed wooden block after providing 34mm dia and 3mm thick mild steel sheet by spot welding at three places to form leg base and refix the leg to charpoy properly all as directed by the Engineer-in-Charge.

Supply & fixing 32mm dia 3 way elbow class B as per IS 1239 (Pt II) 1982

Supply & Re-fix with new BWR grade plywood 12 mm thick commercial as per the size of Charpoy GI/Charpy with ply top as directed by Engineer-in charge Make ;Kitply,Archid ply,Gurjan,Century or equuivalent as directed by GE/Engineer-in-Charge

Supply and fixing in repair check nut 32 mm dia hexagonal shaped class B quality as per IS 1239 (Pt II) 1982 all as directed by the Engineer-in-Charge

Supply and fix CP steel handle 125/100 mm long made to shape and fixing the same to make the 3 way locking system fully operational including removing the unserviceable handle for almirah steel of any size and type.

Supply and fix three way locking device including plane rod MS rod to match with originalto making the system fully operational for Almirah large steel.(Drg No.FD-109/114 (m)/351/67 (m)/1031/1033/TP) including removing the unserviceable locking system

Supply and fix three way locking device including plane rod MS rod to match with original to making the system fully operational for Almirah small/medium steel. (Drg No.FD-67(m)/114 (m) / 350 / 1032/1034 ) including removing the unserviceable locking system.

Supply and fix new key hole with brass lock of 50mm six lever, duly fixed inside face of front shutter with stainless steel keys in duplicate for almirah steel of any size and type all as directed by the Engineer-in-Charge.(Drg No.FD-109/114 (m)/ 115(m) /350/351 /67(m)/1031/ 1032/1033/ 1034/TP)

Supply and fix by welding or jointing to the bottom of steel almirah channel base/leg of length 440mm/484mm as per drg, each consisting of 1mm thick two MS sheet channel base 70mm wide 100mm high with the open end bent out wards up to 15mm, the ends of the channel shall be covered with 70 mm x 100mm MS sheet of 1mm thick incluidng two coats of synthetic enamel paint olive green/smoke grey colour over a coat of zinc chrome primer for Almirah small/medium steel including removing the unserviceable channel base/leg all as directed by the Engineer-in-Charge.(Drg No.FD-67(m)/114 (m)/350/1032 1034 )

Supply and fix by welding or jointing to the bottom of steel almirah channel base/leg of length 440mm/484mm as per drg, each consisting of 1mm thick two MS sheet channel base 70mm wide 100mm high with the open end bent out wards up to 15mm, the ends of the channel shall be covered with 70 mm x 100mm MS sheet of 1mm thick incluidng two coats of synthetic enamel paint olive green/smoke grey colour over a coat of zinc chrome primer for Almirah large steel including removing the unserviceable channel base/leg all as directed by the Engineer-in-Charge.(Drg No.FD-109/114 (m)/ 115(m)/351 /67(m)/1031/ /1033/ TP )

Supply and fix by welding or jointing to the bottom of steel almirah channel base/leg of length 440mm/484mm as per drg, each consisting of 1mm thick two MS sheet channel base 70mm wide 100mm high with the open end bent out wards up to 15mm, the ends of the channel shall be covered with 70 mm x 100mm MS sheet of 1mm thick incluidng two coats of synthetic enamel paint olive green/smoke grey colour over a coat of zinc chrome primer for Locker steel including removing the unserviceable channel base/leg all as directed by the Engineer-in-Charge.(Drg No.FD 257 / 1029 )

Supply and fix 1mm thick mild steel single shelf fixed to three sides (inside) the steel almirah as shown in drawing bent to 25mm on sides, back and in front and further bent upwords to 10mm in front and sides of shelves, duly painted with two coat of synthetic enamel paint olive green / smoke grey colour over a coat of zinc chrome primer for Almirah small/medium steel(Drg No.FD-67(m)/114 (m)/350/1032 1034)

Supply and fix 1mm thick mild steel single shelf fixed to three sides (inside) the steel almirah as shown in drawing bent to 25mm on sides, back and in front and further bent upwords to 10mm in front and sides of shelves, duly painted with two coat of synthetic enamel paint olive green colour / smoke grey over a coat of zinc chrome primer for Almirah Large steel(Drg No.FD-109/114(m)/115(m)/351/67(m)/1031/1033/TP)

Supply and fix 1mm thick mild steel single shelf fixed to three sides (inside) the steel almirah as shown in drawing bent to 25mm on sides, back and in front and further bent upwords to 10mm in front and sides of shelves, duly painted with two coat of synthetic enamel paint olive green colour/smoke grey over a coat of zinc chrome primer for Locker steel(Drg No.FD-257/1029)

Supply and fix 20mm dia CP steel conduit pipe, with 1.6 mm wall thickness, with sockets at both ends 380mm long for Locker steel fixed in repairs all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-257/1029/1034)

Supply and fix safty type, CP brass hasp and staple 75mmx40mm x3mm fixed on the shutter of locker steel in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-257/1029)

Supply and fix 50mm long tower bolt, chromium plaled steel, single lower or upper, duly welded to the shutter fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-257)

Supply and fix single 100mm CP steel bow handle on the left or right shutter fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-257/1029)

Supply and fix rear leg for chair CBB steel 19mm dia ERW conduit, 16G , 56 cm long made to shape, top of the leg welded to lower part of the back of the chair including two coats of synthetic enamel paint olive green colour over a coat of zinc chrome primer and provn of PVC shoe at bottom and PVC cap at top fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

Supply and fix19/25mm dia ERW conduit 16G 1.29 Mtr long made to shape, side vertical back, front leg portion and horizontal seat portion, duly welded to rear leg of chair CBB steel including 2 coats of synthetic enamel paint olive green /smoke grey colour over a coat of red oxide primer with provn of PVC cap on top and PVC shoe at bottom fixed in repairs all as directed by the Engineer-in-Charge.[Drg No.FD-75(m)]

Material and labour for one seat or back frame made out of second class hard wood (chir or venteak or thampakam) 40mm wide & 25 mm thick, made to shape, duly given 2 coats of black synthetic enamel paint over a coat of wood primer, duly caned as per Godrej pattern with new white plastic, cane and fixed on the seat/back of chair CBB steel with 65 mm long machine screws with washers, 2 each on each side fixed in repair all as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

Material and labour for new 19/25mm dia, 1.6mm thick MS conduit made to shape for chair CBA steel forming both the handle portions, vertical leg portions and the horizontal base portion complete, with the handle ends duly welded to the middle portions of the back rest and front legs, refixing the existing arm rests to the handles and providing 4 Nos hard rubber toes to the base including 2 coats of synthetic enamel paint olive green/smoke grey over a coat of zinc chrome primer to steel conduit frame fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

Material and labour for providing 19/25mm dia, 1.6mm thick MS conduit to the lateral (one side) seat and back portion of chair CBA steel duly welded to the front legs and handle portion and applying 2 coats of synthetic enamel paint olive green/smoke grey over a coat of size chrome primer to the entire steel conduit frame of the chair and fixing the existing seat and back caned frame to the chair complete fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

Material and labour for new teak wood handle, made to shape, 400mm long, 50mm wide and 25mm thick, front end duly curved suitable for chair CBA steel duly painted with 2 coats of black synthetic enamel paint over a coat of wood primer and fixing the handles to the arm rest portion of chair with screws from bottom complete fixed in repairs all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

Material and labour for providing one seat or back frame made out of IInd class hard wood (venteak/ Thampakam/chir), 40mm wide and 25mm thick on all four sides, made to shape and painted with 2 coats of synthetic enamel paint black over a coat of wood primer, duly caned with 2mm wide plastic cane as per Godrej pattern, including fixing the seat/ back frame to the chair CBA steel with 65 mm machine screws with nuts and washers fixed in repairs all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-75(m))

Material and labour for 20mm dia, 16G MS conduit left or right side frame including the side front/rear leg portions and the top handle portion, 475mm high in the front 420mm for the rear and 405 mm long for the handle portion, duly welded to the seat frame of chair verandah and also to 10mm dia, MS rod in front. Each leg at the bottom to be provided with 3mm flat iron plates made to shape, duly welded and protected with hard rubber toes. Painting to the conduit frame to be dispensed with in repairs all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-19)

Material and labour for new left or right, single stringer, for ladder for loft with 25mm dia, 2560mm long, 1.60mm thick MS conduit, top end made to shape and top and bottom ends provided with hard rubber toes including painting the entire steel surface of the stringer with 2 coats of synthetic enamel black paint over a coat of zinc chrome primer, complete fixed in repairs all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-44)

Supply and fix 04 Nos MS strip of size 60mmx30mmx4mm thick by welding to the existing frame below the seat of chair with out/with arm including provision one hole for fixing the seat by screwing and two coats of synthetic enamel paintsmoke grey over a coat of red oxide primer as directed by Engineer-in-Charge. (Drg No.FD-75(M))

Supply and fix new table top for table office clerk/general/typist steel of 18mm thick pre laminated teak veneered particle board, with 4mm thick teak wood beading all side duly polished, fixing the top to the table top frame with screws from bottom complete fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-84(m)/FD-1004)

All as per item No. 33 above but for table office officer steel top of size 1370mmx760mm x18mm thick. .(Drg No.FD-84(m)/FD-1003)

All as per item No 33 above but top of 900x900mm (18mm thick) for table 900x900x760mm steel. (Drg No.FD-1009)

Supply and fix new lock, 4 lever aluminum body, locking bolt lever of cast brass with stainless steel keys in duplicate, suitable for table office clerk/general/typist fixed to the shutter or top drawer and providing automatic locking system to the other three drawers complete fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD 84 (m)/1002 /1003/1004/1005/1008)

Material and labour for preparation of old painted surfaces by rubbing down with and paper, without any scratching or damaging the existing coat, clean throughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as color approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer-in-Charge for Shoe rack steel {Drg No FD/E6/MAP/02 (R) }

Material and labour for preparation of old painted surfaces by rubbing down with and paper, without any scratching or damaging the existing coat, clean throughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as color approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer-in-Charge for Bed Hard MAP {Drg No FD/E6/MAP/08 ( R)}

Material and labour for preparation of old painted surfaces by rubbing down with and paper, without any scratching or damaging the existing coat, clean throughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as color approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer-in-Charge for Charpoy IP Hard Top {Drg No FD/MAP-II/01}

Charppoy IP Hard top of 12 MM Ply/Hard Bed Map :- Removing the existing plywood from Charpoy MS square and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour as approved by Garrison Engineer on all external and internal surfaces and refix the plywood of Charpoy IP Hard Top by replacing the old ones with new ones as specified and as directed by the Engineer-in-Charge

All as per item No 40 but for Hard Bed MAP as specified and as directed by the Engineer-in-Charge

Material and labour for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean throughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as color approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Almirah large steel.(Drg No.FD-339/351/1031/MAP-18)

Material and labour for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean throughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as color approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Almirah medium steel .(Drg No.FD-243/FD-340/FD-350/FD-1032)

Material and labour for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean throughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as color approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Locker bed side steel (Drg No.FD-1029)

Material and labour for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean throughly to remove all dust/oily spot etc and applying one coat of synthetic enamel paint as color approved by GE to all in side and out side surfaces of the item painted all as directed by the Engineer -in- Charge for Table tubular steel/table office clerk steel/gen steel/table steel 900x600x760mm/typist steel/900x900x760mm (Drg No.FD-142/138/1004/1009/1008)

Material and labour for preparation of old painted surfaces by rubbing down with sand paper, without any scraching or damaging the existing coat ,clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint white to be painted all sides for Tubular legs and stiffeners of teapoy verandah all as directed by the Engineer-in-Charge.(Drg No.FD-255)

SARGAM ENTERPRISES (BID ID -3121080)

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3130865)

Bell Builders (BID ID -3120385)

SHANMUGA TRADERS (BID ID -3119989)

M/s T.P SHAJI (BID ID -3131043)