Supply and Installation of Maple Wood Flooring along with sports equipment at I M Vijayan Indoor Stadium and Sports Complex at Laloor Thrissur

Amount

Maple wood Flooring with Sports Equipment

od36326/2017_2018 : Supply and installation of Maple wood sports flooring as per specifications and conditions mentioned below: Hard Maple Surface: \Top surface to consist of a solid, MFMA Certified 2nd & better Grade , Hard Maple strip with minimum dimension of 20mm thickness x 57 mm width x RL (random length). Each individual strip of Hard Maple shall include the certification chop of the MFMA (Maple Flooring Manufacturers Association) and manufacturing mill certification number. System must provide a solid Hard Maple top layer of (minimum thickness) 20mm and is to be machined to a smooth finish and varnished after fixing of the individual boards in place at the installation site. Pre-finishing of the boards at the factory is not acceptable. 25 years warranty for the flooring.<br>Maple Fasteners:<br>Hard Maple boards to be fastened in place by pneumatic machine stapling with a 50mm coated flooring staple. Boards to be secret fastened with the staple applied at a 45 degree angle at the top of the tongue on the side of the board.;Vapor Barrier: .20mm polyethylene membrane installed over the concrete base, beneath the flooring system as a vapor barrier between the concrete and wood floor.;Plywood subfloor and resilient pads:<br>1st layer of plywood to be 12mm x 1220mm x 2440mm MR Grade ISI Mark plywood. 1st layer of plywood to have the resilient pads affixed to the underside on 30 cm o.c. spacing regiment and to be installed on the concrete with the long dimension of the plywood running at a 90 degree angle to the direction of the hardwood strip flooring 2nd layer of plywood to be 12mm x 1220mm x2440mm MR Grade plywood and fixed to the 1st layer with mechanical fasteners (staples) at a direction in 45 degree angle to the 1st layer;Shock Pads:;Resilient pads of 19mm thick 2 stage, Polyurethane, resilient shock pads fixed to the underside of the 1st layer of plywood at 30cm o.c. spacing regiment. System must provide a minimum of 10 resilient pads per square meter of installed flooring system.<br>Shock Pads Tensile Strength should not be less than 5000 psi and must be tested in accordance with STEM;Finishing :Floors to be machine sanded with drumsamder ( coarse grade 60 grit) sandpaper to lmake the floor smooth and mnon-slippery. The floor shall not b sealed. Apply 2 coat of approved sealer and 2 coat of Gym finish per manufacturer’s instructions with 2 coat of game line marking. The rate includes fixing of sleeves for fixing equipment for volleyball, basketball and badminton.;Performance & Quality Certification:1. Flooring system shall be independently tested and certified to the EN14904 performance standard and certificate from an accredited, independent testing laboratory must be submitted.2. Manufacturer to be a certified manufacturer of the MFMA (Maple Flooring Manufacturers Association)- certificate to be provided as evidence of such, 3. Manufacturer to be certified in accordance with ISO9001:2000 standard- ISO certificate to be provided as evidence of such.4. Flooring system to be tested and certified in accordance with STEM (Structural Testing and Engineering Measures)- certificate to be provided as evidence of such.5. Shock Pads Tensile Strength should not be less than 5000 psi and must be tested in accordance with STEM testing standards and provide minimum ratings fcertificate<br>to be provided as evidence of such 6. The floor manufacturer should have Certifications from following<br>International federations - 1. WORLD BADMINTON FEDERATION. 2. INTERNATIONAL HAND BALL FEDERATION. (IHB) 3.INTERNATIONAL BASKET BALL FEDERATION(FIBA)

od38822/2017_2018 : Supply and installation of Indoor movable sports equipment for basketball,volleyball and badminton 1. 3 nos. Badminton Mobile Post Set with adjustable crank and net.2. Basketball backboards ( one pair) with frame and markings as per FIBA Standards, Two Basket rings with a ring mounting plate and net.3. One pair of FIVB approved Mobile Post Set for Volleyball, with Crank System For Height Adjustment and with net complete.The rate shall be inclusive of all materials, transportation and labour charges for installing the equipmentwith all accessories and necessary / ancillary works so as to satisfy the FIVB standards. The work to beexecuted as per the the directions of the engineer-in-charge

FREEWILL INFRASTRUCTURE PVT LTD