CERTAIN REPAIR TO BOUNDARY WALL, SECURITY FENCING, DRAIN, PATH, MISC WORKS, REPAIR/ CLEANING OF SEWAGE LINES, SEPTIC TANKS AND CAMOUFLAGE, EXTERNAL PAINTING TO CERTAIN BLDGS AND WATER TANKS AT AF STN MT ABU AND GURUSHIKHAR UNDER GE (AF) NO 2 JODHPUR

Amount

Cleaning of pipe drains by rodding 100mm internal dia drain pipe upto 1.50 m in depth and removal of sludge/silt/liquid/mud and sand (in foul position) etc out side the MOD land including testing of drains by filling the pipes with water complete all as specified & as directed by Engineer-in-Charge. Note :- (i) Contractor shall be provided all tools and plants including bamboos, iron rod, bucket, rope etc for the operators. (ii) Contractor shall be provide 01 Nos safaiwalas every month and has to get it done sewage complaint which is received day to day by sub division. (iii) Any complaint which is not completed within two days from the date of issue of complaint, compensation will be charged @ Rs 200/- per day in addition to above every additional day delayed will be charged @ Rs. 50/- per day. (iv) All above provisions included in quoted rate.

All as per item No 2 here-in-before but cleaning of 150mm internal dia drain pipe not exceeding 1.5m in depth.

Cleaning of manhole upto 1 m depth and removal of sludge silt/liquid/mud/sand/water etc in foul position to out side the MOD land complete all as specified and directed by the Engineer-in-Charge.

All as per item No 4 here-in-before but exceeding 1m and not exceeding 2m in depth.

Dewatering/desilting of septic tanks,soak wells etc cleaning of all sludge,silt residue of both organic and inorganice nature by manual labour or mechnical scrappers etc and disposal of the same out side the defence land incl dumping the material to any depth complete all as specified and directed by EIC.

Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 200 mm.

All as per item No. 7 here-in-before but for 300 mm internal dia.

M&L 150 mm internal dia salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified.

All as per item No 9 here-in-before but bore of pipe 200 mm.

S&F reinforced cement concrete pipes 300 dia class NP2, laid and jointed complete with collars complete all as specified.

M&L concrete bed to 300 mm bore drain pipes in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregates including packing under and haunching against the sides of pipes after they are laid and tested.

Ditto all as per item No. 12 here in before but bore of pipe 200 mm

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 m in depth for manholes & sewage lines and getting out in soft/loose soil.

M&L cement concrete type C-2 1:3:6 ( 40 mm graded aggregate) as in foundation, filling and mass concrete.

M & L for brick work with sub class 'B' Bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 as in manholes.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4.

M&L for providing cement concrete 1:2:4, type B1, using 20 mm graded stone aggregates as in coping

M&L PCC 1:2:4 type B2 as in surface channels and drains & benching of manholes and finishing even and smooth with out using extra cement.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm.

Removing excavated materials to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required, Internal dia of pipe 150mm.

All as per item No 22 here-in-before but bore of pipe 225 mm.

S&F in repairs cast iron Nahani trap with grating including jointing to waste pipe, fixed in cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate, dia of outlet 100 mm.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, all as specified and directed.

S&F 100 mm dia cast iron pipe with spigot and sockets & vertically cost, class A, in any length laid in trenches pipe single socketed in any length with rubber ring joint fix to walls incl suitable clamps.

S&F Cast iron bends 100 mm dia (any type, radius an angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, `Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed by Engr-in-Charge.

S&F cast iron sand caste soil waste & vent pipes 100mm bore in any length with or without ears with cement joints fixed to walls complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears fixed to walls with lead joints (Lead joints measured separately) complete all as specified and directed by Engineer in charge.

S&F CI branch piece single (equal or unequal) ordinary or invented (spigot or socket type) or with parallel branches, bore of pipe 100mm.

S&F Cast iron branch piece 75 mm bore size with oval access door single ( equal or un equal ) ordinary or inverted ( spigot or socket type) or with parallel branches complete all as specified and directed by Engineer in charge.

S&F Cast iron bends any radius, diminishing pieces or tapers 100mm bore size complete all as specified and directed by Engineer in charge

S&F 75mm bore CI bends, Diminishing pieces or tapers fixed with lead joints (lead joints measured separately

Dismantling wrought iron or mild steel work of any description not otherwise provided.

Dismantling of unserviceable chain link fencing fixed with any post in any position

S & F angle iron post of as in fencing post confirming to Fe-290-0 Gde-165 all as directed by Engineer – in- Charge

M&L for excavating in post holes or similar work each not exceeding in hard dense soil getting out and returning filling and ramming including watering etc and removing surplus to a distance n.exc 50mtr and making good to ground

M&L for cement concrete 1:3:6 types C-2 with 40 mm graded aggregate as in foundation, filling and mass concrete.

S&F chain link fencing of mesh size 100 X100 mm using 4 mm galvanised steel wire fixed to any standarad nails & bolts incl provision of binding wire where required

Refixing only chain link fencing including line wire MS flat with nut and bolt obtained from item No- 39 as directed by Engr-in-Charge

S&F MS flat iron 40 x 6mm Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe-290 Gde-E-165

S&F 12 mm dia GI round bar fixed in any position including jointing either welding or hooks as directed as in line wire for chain link

M&L preparation of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide.

M&L for preparation of old decorated Steel surfaces and applying one coat of synthetic enamel paint over 10 cm in width or girth all as specified.

M&L for preparation of old decorated steel surfaces of any description not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.

Demolition of cement concrete of any description n.exc 15cm thickness (below or above ground level)

Demolition of brickwork /stone masonry / precast articles / jalli built in cement mortar.

M&L brickwork with sub class ’B’ bricks straight or curved on plan exc.6 m mean radius built in cm 1:6.

S&F in repairs galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt .including .securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pins etc. as directed ( each line wire to be measured )

-Ditto –but restraining and resecuring incl making good staples

S&F in repair galvanized steel punched type concertina coil 1050 mm dia(dia of coil when unstreched) and fixed to angle iron post all as specified and directed by Engr-In-Charge.

Fixing only in repair galvanized steel punched type concertina coil 1050 mm dia(dia of coil when unstreched) and fixed to angle iron post all as specified and directed by Engr-In-Charge.

M&L precast cement concrete type C-I 1:3:6 (20mm graded agg) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4.

M&L for walling of random rubble uncoursed masonry built in cement mortar 1:6 and brought upto course

M&L providing precast cement concrete louvers and jallies 50 mm thick including precast RCC pillar type B-0 1:3:6 ( 12.5 mm graded agg and set in cement mortar 1:6 all as directed by Engr In- Charge .

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc

M&L 15mm thick rendering on stone masonry / brick surface in cm 1:4 to finished even and fair faces and including mixing of water proofing compound Dr.fixit Qty 3% of the cement weight all as specified & directed by Engr-in-Charge.

M&L 15mm thick rendering on stone masonry / brick surface in cm 1:4 to finished even and fair faces all as specified & directed by Engr-in-Charge.

M&L for preperation of new plastered surfaces etc and applying two coat of cement base paint on walls over a coat of alkali resistant priming paint all as specified.

M&L for applying 3mm thick wall care putty on wall, deep scraped surfaces or undulated surfaces in patches and making good even and smooth rubbing with sand paper etc

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or Gde-E- 165 all as directed by Engr-in-charge

S&F joist channel angle, tee section, MS pipe, MS square tube ,bars , MS plate fixed in purlin rafter cleat, support etc incl welding, riveting etc conf to Fe-290 Gde E-165 all as directed by Engr-in-charge

S & F PVC 110 mm (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps all as specified and directed by Engr-in-Charge

S & F PVC 110 mm (SWR) bends any radius

S & F PVC (SWR), junction single, (Single T) equal or unequal 110 mm

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings etc complete all as specified and directed.

S&F in repairs 0.63 mm Galvanized corrugated mild steel sheeting with two corrugation side lap fixed with J or L hook with zinc coating 275 grams including cup washers etc complete all as directed by Engr in Charge

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/clading to wall, molding/folding in circular/semicircular of any position and height fixed with self tapping screws as specified, As directed by Engr-in-charge

S&F in repairs fibre glass reinforced translucent corrugated sheet 2mm thick with two corrugations side lap fixed with L- type or J- type or cranked hook bolts.

S&F in repairs fibre glass reinforced translucent plain sheet 2mm thick fixed with L- type or J- type or cranked hook bolts all as specified and directed by Engr-in-Charge.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/clading to wall, molding/folding in circular/semicircular of any position and height fixed with self tapping screws as specified, As directed by Engr-in-charge

S & F in repair SFRC manhole cover size 600 mm x 600mmx70 mm thick or 600 mm dia(circular)x70 mm thick with frame set in cement mortar 1:4 complete all as specified and directed.

S & F in repair SFRC manhole cover size 450mmx450mmx40mm thick with frame set in cement mortar 1:4 complete all as specified and directed.

S & F in repair SFRC manhole cover size 1000x1000x70 mm thick with frame set in cement mortar 1:4 complete all as specified and directed.

Dismantling old steel wire fabric of any shape and size.

S&F Welded steel wire fabric n exc 4 kg/sqm fixed to steel members complete all as specified.

M&L hardcore of brocken stone or boulder n,exc 63 mm deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface.

M&L cement concrete 75 mm thick type C-2 1:3:6 ( 40 mm graded agg ) as in plinth protection etc.

Dismantling floor, hearth or wall tiling or stone flooring including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm grade stone aggregate) as in Sub floors,Sub bases ,flooring etc

M & L Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick set , jointed and pointed in neat cement slurry in floors with gray cement and pigment with screed bed 15 mm CM 1:6 complete all as specified by Engr- in- Charge

M&L for refixing in repair of the stainless steel railing including welding and grouting into the flooring and fixing with PCC 1:2:4 and match with the exiting flooring all as specified and directed by Engr-in -Charge.

Dismantling of Mild steel/stainless steel posts, balluster top railing as in stair case railing of any description.

S&F in repairs stainless steel pipe 100mm outer dia, 1.00m long as in vertical post for stair case railing with stainless steel ball 150mm outer dia fixed on top with nuts and bolts fixed in position with base plates fastener including cutting holes, grinding, polishing and welding as required and directed by Engineer-in - Charge.

S&F in repairs 50mm dia stainless steel pipes of decorative or ornamental design of height 0.80 m as in intermidate post/balluster for stair case including welding complete all as specified and as directed.

S&F in repairs 75mm dia stainless steel pipes as in stair case top railing fixed to stainless steel post including cutting holes,bending, grinding, polishing and welding as required.

S&F in repairs 25mm bore dia stainless steel pipes of decorative or ornamental design as in intermidate railing for stair case including welding complete all as specified and as directed by Engineer-in Charge.

M&L for applying 3mm thick wall care putty on wall, deep scraped surfaces or undulated surfaces in patches and making good even and smooth rubbing with sand paper etc

M&L for preparation of old previously decorated surfaces and applying one coat of exterior emulsion weather proof paint in camouflage pattern all as specified &directed by Engr-in-Charge. (Note - work shall be got executed through skilled representative of manufacture company and upto 30 m height wihtout any extra charge)

M&L for complete removal of existing treatment from walls or similar surfaces by washing, rubbing down and stopping of distempered and painted surfaces etc and applying two coats of exterior emulsion weather proof paint in camouflage pattern over a coat of 3 mm thick wall care putty bldgs and overhead tanks Etc all as specified & directed by Engr-in-Charge. (Note - work shall be got executed through skilled representative of manufacture company and upto 30 m height without any extra charge)

M&L for complete removal of existing treatment from walls or similar surfaces by washing, rubbing down and stopping of distempered and painted surfaces etc and applying two coats of exterior emulsion weather proof paint in camouflage pattern over a coat of primer all as specifiedby Engr-in-Charge. (Note - work shall be got executed through skilled representative of manufacture company and upto 30 m height wihtout any extra charge)

M&L for preparation of old previously decorated surfaces by brooming down or steel wire brushes, scrapping down smoke soot, moulds, efflorescent salts etc and applying two coats of cement base paint in camouflage pattern over a coat of primer of on walls all as specified and directed by Engr-in-Charge.(Note - work shall be got executed through skilled representative of manufacture company upto 30 m height wihtout any extra charge and on Boundry wall externally to be done by removing the concertina coil at the top of wall to go external side)

M&L preparation of old/new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint in camouflage pattern over one coat of red oxideall as specified &directed by Engr-in-Charge. (Note - work shall be got executed through skilled representative of manufacture company and upto 30 Mtr height wihtout any extra charge)

M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered and painting surfaces etc and applying two coat of cement base paint on walls over a coat of alkali resistant priming paint all as specified. (Note - work shall be got executed through skilled representative of manufacture company and upto 30 m height wihtout any extra charge)

M&L for Preperation of old previously decorated existing surface of wall then applying one coat of plastic emulsion paint in different colours as required with rolling instrument including preparation of old decorative surfaces etc all as specified. (Note - work shall be got executed through skilled representative of manufacture company and upto 30 m height wihtout any extra charge)

M&L for preparation of old decorated wooden surfaces and applying one coat of synthetic enamel paint over 10 cm in width or girth all as specified.

-Ditto- all as per item No 97 above but on steel surfaces.

boon construction company