EPAIR/ MAINT OF CEILING FAN, EXHAUST FAN AND CONNECTED ITEMS IN SMA

Amount

Disconnection of electrical wire from ceiling fan any type / size and make from existing position, and reassembling the repaired ceiling fan and testing to the entire satisfaction of engineer in charge and hanging at same place with nut , bolts washers etc, connection with flexible wire & testing complete. NOTE:- (Renewal of Spares flexible wire etc/rewinding of ceiling fan/shall be measured and paid separately under respective item for material and labour cost .)

Material and labour for rewinding of ceiling fan 1200/1400 MM sweep by dismantling of fan motor, cutting and removing of burnt windings, cleaning the motor slots, rewinding the motor with supper enamelled copper wire of appropriate gauge, provision of insulation paper, applying of varnish, heating / baking the motor to achieve the proper insulation resistance washing and removing of old lubricating substance from bearing/bush using Kerosene oil, painting ,carrying out fresh lubrication using grease and to make free for smooth functioning complete all as directed.

Carrying out re metalling in worn out shaft, cutting and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to entire satisfaction of Engineer in charge (Note : bearing shall be measured and paid separately )

Supply only ball bearing of any size and type, suitable for any type/make/size of ceiling fan all as specified and directed. Make - TATA/NBC/SKF

Supply and fixing capacitor capacity 2.5 MFD, 220 volt ISI marked all as specified and directed

Supply and fixing PVC insulated, unsheathed multistranded twin twisted copper flexible cable of size 1.5 Sqmm all as specified and directed

Supply only suitable size of bush for ceiling fan of any type/size all as specified and directed. Make - TATA/NBC/SKF

Supply and fixing of PVC connector 4 way 6 Amps with connection screws, nuts. etc complete all as specified and directed.

Supply and fixing PVC clamps with fixing screws for holding capacitor of any type and size all as specified and directed.

Supply and fixing alloy Steel Heavy Duty "S" or "D"-Hook Hanger with double Fasteners M10 x 75mm for Hanging Ceiling fan steel worn-out hook all as specified and directed.

Supply and fixing in repair heavy duty Steel & rubber fan to ceiling hook attachment clamp with fan rod nut bolt & locking pins complete set all as specified and directed.

Supply and fixing ceiling fan blade of 1200/1400mm size of existing Make including proper painting matching with existing ceiling fan all as specified and directed.

Supply and fixing PVC canopy suitable for ceiling fan of any type/make for both end of down rod including fixing screws all as specified and directed.

Supply and fixing down rod 1'/1.5' suitable for ceiling fan of any type/make for both end of down rod including fixing screws all as specified and directed.

Cleaning of ceiling fan assembly of any type/size and carrying out two coat of spray painting with first quality synthetic enamelled paint of approved colour, including writing of MES number in black paint all as directed and specified.

Disconnection of electrical wire from exhaust fan of any sweep any type / size and make, dismantling the exhaust fan from existing position, and reassembling the repaired exhaust fan and testing to the entire satisfaction of engineer in charge and hanging at position with nut , bolts washers etc, connection with point wiring & testing complete. NOTE:- (Renewal of Spares flexible wire etc/rewinding of exhaust fan/shall be measured and paid separately under respective item for material and labour cost .)

Supply and fixing switch piano, flush type, single pole, one way, 5 Amps ISI marked complete all as specified.

Supply and fixing electronic Fan regulator stepped type flush type 120 W suitable for existing ceiling fans fixed on phenolic laminated sheet etc. as reqd complete all as specified and directed.

Material and labour for rewinding of exhaust fan of 300 mm sweep by dismantling of fan motor, cutting and removing of burnt windings, cleaning the motor slots, rewinding the motor with supper enamelled copper wire of appropriate gauge, provision of insulation paper, applying of varnish, heating / baking the motor to achieve the proper insulation resistance washing and removing of old lubricating substance from bearing/bush using Kerosene oil, painting ,carrying out fresh lubrication using grease and to make free for smooth functioning complete all as directed.

-Ditto- all as per item No.19 above but 380 mm sweep

-Ditto- all as per item No.19 above but 450 mm sweep

Supply and fixing of louver shutter made of MS sheet metal 1.2 mm thick for round/square base and 0.8 mm thick for flaps, comprising of mounting legs frames made of MS flat strips of size 25mm x 3mm including heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall fater drilling, and duly painted by two coat of synthetic enamelled paint (spray painting) over a coat of primer for exhaust fan up to 300/380 mm sweep complete all as directed.

M&L for fan motor suitable for PVC body exhaust fan upto 250 mm sweep and RPM match with existing incl taking down old motor and fixing of new with proper alignment and refixing the same using necessary mounting screws and accessories without any vibrations and noise to the satisfaction of Engr-in-Charge.

Supply and fixing capacitor 230 volt AC 50 HZ 4.0 MFD, 220 volt ISI marked complete all as specified

M & L ceiling rose 3 phase/PVC/polycarbonate, isolated body all as specified and directed.

Supply and fix PCB (Printed Circuit Board) for BLDC fan of any make/type and size (1200/1400) mm sweep as existing to obtain the specified and satisfactory RPM as per manufactures specification, complete. Note : Ceiling fan before fix at site the RPM shall be checked and match as per manufactures specification till entire satisfaction of Engr in charge

MS BUILDERS (BID ID -3081582)

GOLDEN EYE BUILDERS (BID ID -3078005)

Omkar Manpower Consultancy (BID ID -3072856)

St George Engineering Works (BID ID -3072644)

Super Constructions (BID ID -3075178)

Suprisons (BID ID -3081861)