DEPOSIT Balussery koorachund road Reformation estimate for laying pipeline for KWA between km 0 000 to 1 000 on Balussery Koorachund road

Amount

Deposit work

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD67267/2023-2024:Mixed Seal surfacing Manual Means -Type-A-Bitumen VG30 Providing -Laying and rolling of close graded premix surfacing material of 20mm thickness composed of 11.2mm to .9mm (Type A)aggregates using penetration grade bitumen to required line grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant laying and rolling with a three wheel 8-10 KN static roller and finishing to required level and grades as per technical specification

ANJANA CONSTRUCTIONS

Bidder Name

ANJANA CONSTRUCTIONS

REJIJOSEPH K