Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹18.7 L
Closing Date
17 Aug 2026, 9:30 pm
Karnataka Industrial Areas Development Board
Assistant Executive Engineer-Ele
08022267905
Providing Electrical Infrastructure Facilities at Dharwad Node Industrial Area, (Phase-II Part), Dharwad Taluk & District. (Package-3).
KIADB/2026-27/EL/WORK_INDENT472
KIADB/2026-27/EL/WORK_INDENT472
Open
Electrical
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
3 documents required · 3 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26) Mandating satisfactory completion as a prime contractor for at least One Similar Nature of Electrical work involving such as Providing Electrical Infrastructure Facilities, to an extent of not less than 50% of the amount put to tender (i.e., Rs.933.00 lakhs). (Work executed and work done certificates issued under Joint Venture shall not be considered)
Executed in any one financial year, the following minimum quantities of work (Supply & Erection) (80% quantity of work put to tender): Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government / Public Sectors/Government Undertaking Organizations. (Quantities executed certificates issued under Joint Venture shall not be considered). (1) 11kV 3Cx400sqmm XLPE HTUG cable : 17.40 Km, (2) 1.1kV 3.5Cx240sqmm XLPE LTUG cable : 12.80 Km, (3) RMU 1way/5way : 12.00 Nos, (4) 11kV/433V transformer- 100kVA & above : 9.60 Set (5) LT feeder piller Box : 38.40 Nos.
Each Tenderer should further demonstrate:Availability by owning at least 50% of the required / specified key and critical equipment for this work. The remaining 50% can be deployed on lease / hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished : (Furnish details of plant / machinery / equipment etc.,)Tenderer shall have own ladder mounted jeep vehicle, excavator & crane (Hydra) 10 Ton Capacity on lease / Hire basis. Tenderer should enclose all relevant documents with technical bids as evidence.
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A: Maximum value of Electrical Engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 11 Months
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26) Achieved in at least two financial years a minimum financial turnover of Rs.3732.00 Lakhs. (Electrical Contract Works) (Not less than 2 times the amount put to tender)
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.559.80 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc).
₹7,500
₹18.7 L
18 Jul 2026
27 Jul 2026
18 Aug 2026
29 Jul 2026
30 Jul 2026
31 Jul 2026
Providing Electrical Infrastructure Facilities at Dharwad Node Industrial Area, (Phase-II Part), Dharwad Taluk & District. (Package-3).
Providing 11 KV Express feeders:
Supply of 11kV, 3 Core HTUG XLPE Insulated Cables as per IS-7098 (Part-2) 2011 with following parameters & as per BESCOM Requirements:
(a). Insulation manufactured thr...
Supply of 11kV Heat Shrinkable XLPE Indoor Cable Termination Kit with all lead and lifts complete as per specifications and directions of engineer in charge. 3Cx400 Sqmm
Supply of 11kV Heat Shrinkable XLPE Outdoor Cable Termination Kit with all lead and lifts complete as per specifications and directions of engineer in charge. 3Cx400 Sqmm
Supplying of Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule with all lead and lifts complete as per specifications and directions of engineer in charge. 3C...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Supplying & Fixing of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Artificial/Manufacture Sand with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing GI Pipe, 150 mm Dia for drain crossing, cable raising etc.,with all lead and lifts complete as per specifications and directions of engineer in charge.
Cable trench excavation (ordinary soil) with all lead and lifts complete as per specifications and directions of engineer in charge.
Refilling and consolidation with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying of high tension 11 KV(E) 3 core 400 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers with all lead and lifts complete as per specifications and directions ...
Making and Fixing pot head for HT Cable only (indoor / out door) with all lead and lifts complete as per specifications and directions of engineer in charge. 3Cx400 Sqmm
Making and Fixing pot head for HT Cable only Heat shrinkable Straight Through Joint with all lead and lifts complete as per specifications and directions of engineer in charge. 3Cx400 Sqmm
Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars elbows, bends tees and other fitting with cuts and threads wherever necessary with all lead and lifts co...
Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site with all lead and lifts complete as per specifications and directions ...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supply, installation, testing and commissioning of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps with all lead and lifts complete as per specifications and directions of engineer in...
Supply, installation, testing and commissioning of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps with all lead and lifts complete as per specifications and directions of engineer in...
Bed Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts complete as per specifications and directions of engineer in charge.
Labour Charges for Construction of Bed Concreting with all lead and lifts complete as per specifications and directions of engineer in charge.
Foundation with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts complete as per specifications and directions of engineer in charge.
Labour Charges for Construction of Foundation with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying, fitting and placing Mild Steel Reinforcement with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., with all lead and lifts complete as per specifications and directions of engineer in charge.
Rod type earthing with 40 mm Dia, 3 Mtr long MS rod as per specification & drawing including digging of pit & fixing with all lead and lifts complete as per specifications and directions of engineer ...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc.,with all l...
Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....
Providing Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge.
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint Brush etc., with all lead and lifts complete as per sp...
Compact Pre - Fabricated Packaged Sub - Station 11kv/433V consisting of 3 way SF6/VCB insulated compact RMU, oil cooled CRGO/Amoprhous Core Star - 2 Rated (5 - Star) Transformer and LT section with on...
Supply of Weather Proof, Verming Proof LT Metering Box with clamping arrangement for mounting on the Transformer structure with necessary terminal strip and CT mounting arrangement for housing the ETV...
LT CT's 0.5 Accuracy Class Ring Type Ratio 800/5 for 500 kVA DTC with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of Compact Pre-fabricated Packaged Sub-station 11kV/433 V:
Installing & fixing the compact pre-fabricated packaged sub-station with 100/250/500/800/1000 kVA transformer on the existing concre...
Fixing of Weather Proof, Verming Proof LT Metering Box with clamping arrangement for mounting on the Transformer structure with necessary terminal strip and CT mounting arrangement for housing the ETV...
Fixing of LT CT's 0.5 Accuracy Class Ring Type Ratio 800/5 for 500 kVA DTC with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of 1.1kV LTUG XLPE Insulated Cables as per IS-7098 (Part-1) with following parameters & as per BESCOM Requirements: (a) H2/H4 grade Aluminium Conductor having purity of 99.7percent (b) Condu...
Supplying of Epoxy terminating kits, 1.1KV 3.5 core 240 sqmm XLPE UG cable termination kit with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of HS type Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 for 1.1KV 3.5 core 240 sqmm XLPE UG cable with all lead and lifts complete as per specifications a...
LT Feeder Piller Box 12 way with Porcelain Rewirable cutouts & 1 No of 630A Load Break Switch with copper bus bar with all lead and lifts complete as per specifications and directions of engineer in ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff with all lead and lifts complete as per specifications and direc...
Fixing of Epoxy terminating kits, 1.1KV 3.5 core 240 sqmm XLPE LTUG cable termination kit with all lead and lifts complete as per specifications and directions of engineer in charge.
Making Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable for 1.1KV 3.5 core 240 sqmm XLPE UG cable with all lead and lifts complete as per specifications and directions of engineer in...
Erection of LT Feeder Piller Box 12 way LT Feeder piller box (MS & Thermoset Plastic Enclosure) including necessary civil works like soil excavation & concreting etc. completewith Porcelain Rewirable ...
Supply, fabricating and fixing of Angle iron for laying 11kV HT & LT Power cables work in existing cable duct along with painting, complete with all lead and lifts complete as per the specifications &...
Supply, fabricating and fixing of MS tray in existing cable duct along with painting, complete with all lead and lifts complete as per the specifications & directions of the engineer incharge for the ...
Providing and fixing GI chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts bolts and washers as required complete as per the direction ...
Supplying & fixing M.S rectangular poles made out of 2 equal angles of 65* 65*6 mm welded together & fixed in cc (1:2:4) with 2 nos 16mm dia M.S hold fast rods each of lenth 25 cms, Including cost of...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document.pdf
Tender Document • 1.01 MB
Package-3.pdf
pdf • 0.85 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].