Reconstruction of Office Building at DRDA Compus, Dist: Amreli

Name of Work :- Reconstruction of Office Building at DRDA Compus, Dist: Amreli

BILL OF QUANTITIES

Item Description Quantities Unit Rates Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

1 useful materials and disposing off the excavated stuff as directed upto 50 Meter 48.60 Cum 122.93

lead (A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and

2 stacking of useful materials and disposing off the excavated stuff upto 50 Meter 13.00 Cum 170.49

lead.(B) Dense or Hard soil

Providing and laying controlled cement concrete M.150 for curing complete

excluding cost of formwork and reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns and Mass concrete

Brick work using common burnt clay building bricks having crushing strength not

4 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 5.60 Cum 4214.32

6 -fine sand)(B) Conventional

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

5 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 37.90 Cum 136.91

disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

6 thickness including watering, ramming and consolidating etc. complete. 17.80 Cum 301.77

Providing and laying ordinary cement concrete M200 and curing complete

including the cost of formwork but excluding the cost of reinforcement for RCC

work. (a) Foundation, Footing base of column mass concrete. For Footing

Providing and laying ordinary cement concrete 1:1.5:3 (1 cement : 1.5 coarse

sand : 3 graded stone aggregates 20 m.m. nominal size) and finishing smooth with

8 curing etc. complete including the cost of form work but excluding the cost of 4.00 Cum 6399.18

reinforcement for R.C.C. work in :Plinth Beam(i) Having cross sectional area .08 to

Brick work using common burnt clay building bricks having crushing strength not

9 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 18.50 Cum 4496.04

6 -fine sand)(B) Conventional For GF

Providing and laying cement concrete work 1:1.5:3(1- Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm nominal size) and curing complete excluding cost

of formwork and reinforcement for reinforced concrete work in (B)Lintels upto

floor two level.

Providing & laying ordinary C.C. 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded

stone aggregate of 20 mm nominal size)for R.C.C.Chhajja including finashing

smooth with curing etc.complete including cost of form work but excluding cost

of reinforcement. For GF

Providing and laying ordinary cement concrete M200 and curing etc. complete

12 including the cost of form work but excluding the cost of reinforcement for RCC 5.60 Cum 8958.57

work (C) Column For GF

Providing and laying ordinary cement concrete M200 and curing etc. complete

13 including the cost of form work but excluding the cost of reinforcement for RCC 4.30 Cum 7137.53

work (B) Beam For GF

Providing & laying ordinary C.C. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded

stone aggregate of 20 mm nominal size) and finishing smoothe with curing etc.

14 Complete including cost of form work but excluding cost of reinforcement. for 7.50 Cum 7073.53

R.C.C. work in (A) SLAB having C.S. than 10 cm and upto 13 cm thcikness. For GF

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level .

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing

16 flooring by adhesive material including dismentaling of existing flooring and 50.00 Sqm 1264.40

jointed with color cement slurry including finised with flush pointing & cleaning

the surface etc. complete for light shade

Name of Work :- Reconstruction of Office Building at DRDA Compus, Dist: Amreli

BILL OF QUANTITIES

Item Description Quantities Unit Rates Amount

Providing and laying Black or Colour Machine Cut free edges, Machine polished

Granite Stone slab 18 mm thick single piece For Stair, Step, Landing, Skirting etc

as per design including fully moulded round front edge and 1cm nosing and

17 necessary groove on trade of steps laid on 20 mm thick cement mortar 1:6 (1- 18.70 Sqm 3036.45

cement : 6 coarse sand) jointed with grey cement slurry including rubbing,

polishing & Finishing etc complete as directed by Enginner in Charge.(Sill-Jems &

Providing and Fixing 32mm thick decorative flush Door shutter (Shutter fixing to

Stone frame) of approved quality and design consisting of both side 1.00 mm thick

texture laminated flush door in single piece, all edges shall be covered with teak

wood beading incl. required fitting and fixtures of S.S.,cylindrical lock system with

all labour, tools materials as directed by Engineer-In-Charge.

Providing and fixing window having extruded aluminum Colour anodized section

frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal

Three track member size 92mm x 31.75mm x .30mm,@ Wt.1.591 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.020 Kg/mt with sliding

shutters of horizontal member size 40mmx18mm x1.29mm @ wt.of 0.456 Kg/mt,

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with

5mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame

as per details etc

Providing 20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement :

3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) including

scaffolding curing etc. complete.

Providing 20 mm thick double coat smooth cement plaster on interior Brick Work

/ concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered materials.etc complete

Applying two coats of acrylic laphy (putty) & two coats of primer of approved

brand and manufacture on new wall surface to give an even shade including

23 thoroughly brushing the surface free from mortar dropping and other foreign 138.30 Sqm 40.59

matter and sand papered smooth as per instruction of Engineer in charge &

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.smooth.

Providing and fixing M.S. grills/ Railing of required pattern to M.S. frames of

windows ,Door , Jali etc. with M.S. flats at required spacings and frame alround,

25 square or round bars with round headed bolts and nuts or by screws 485.00 Kg 106.23

including all Fixture etc complete as directed by Engineer in charge

Name of Work :- Reconstruction of Office Building at DRDA Compus, Dist: Amreli

BILL OF QUANTITIES

Item Description Quantities Unit Rates Amount

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735- 1999 of approved make for

drainage systempipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of thesize 110 mm

diametre x 149 mm length x145 mm heigh at every 2000 mm center tocenter or

shall be concealed in walls asdirected including necessary fittings such as bends,

shoes etc. including testing of pipesand joints and jointed with adhesive solvent

cement including cost of all materials.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of

27 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 3.00 Sqm 1195.02

jointed with white cement slurry

Providing and fixing 90 cm high Stainless steel railing made from anticorrocive S S

pipe of 50 mm dia (16Gauge) as hand rail with S S 38 mm dia (16Gauge) as a

vertical support fixed in RCC slab at 1.2m c/c including three horizontal S S pipes

28 of 25 mm dia (16Gauge) at eqal distance fixed by 18.75 mm dia (16Gauge) S S 19.20 Rmt 2069.12

pipe including accessories as per detailed drawing as directed etc complete.

Providing and Fixing FIRE EXTINGUISHER 6 KG ABC including cost of labour

29 complete with providing 1 year guarantee for each bottle including testing and 3.00 Nos 2550.25

Providing and Fixing FIRE EXTINGUISHER 4.5 KG CO2 including cost of labour

30 complete with providing 1 year guarantee for each bottle including testing and 3.00 Nos 5610.55

Providing and fixing alluminium partition with section of size (63.50 x 38.10 X

1.54) mm and 63.5 X 38.00 X 1.55 with vertical members at a center to center

fistance of not more than 900mm and infill glass 6mm plain frosted Saint Goban or

6mm elite infill panels with PVC transperant using glazing clip 19 X 17.2 X

and angle 20 X 20 X 1.5 as per design, fixed to the flooring usinf proper fasteners

so as to make it rigid and strong including all necessary accessories as complete by

Engineer Incharge.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length , in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with

following type accessories Cat. III

Name of Work :- Reconstruction of Office Building at DRDA Compus, Dist: Amreli

BILL OF QUANTITIES

Item Description Quantities Unit Rates Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front

35 plate modules erected on / in wall / ceiling as per pipe erected with following type 15.00 Pts 524.19

of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front

36 plate modules erected on / in wall / ceiling as per pipe erected with following type 8.00 Pts 788.81

of accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board.(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete.

37 Decorative call bell Ting-tong box type 250 volts complete erected. 3.00 No 79.79

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %,CCT 3000 K to 6500K, Luminaire efficacy>

38 lumens/watt ,LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 6.00 Nos 894.86

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.)(A) Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips complete.IP20(iv) 22-24 watts,

Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

39 lumens/watt ,LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 3.00 Nos 322.19

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.)(B) LED Panel Light with provision for Plane front frame with

translucent cover fixed to housing complete.IP20 (i)up to 8 Watts,4" x 4", Surge-2

Providing & erecting 240 V MCB double pole switch for motor & inductive load

40 (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box 3.00 Nos 353.50

having following capacity (A) 6 to 32 Amp. Cat.III

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve)

41 having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 3.00 No 348.45

following capacity (B) 40 Amp. Cat.III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms

to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (a) single door (IP-

Name of Work :- Reconstruction of Office Building at DRDA Compus, Dist: Amreli

BILL OF QUANTITIES

Item Description Quantities Unit Rates Amount

Providing and erecting Approved make Ceiling fan with double ball bearing ISI

mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected

on existing hook or clamp with earthing. [Make shall be approved by Engineer in

I/We am/are willing to carry out the work at…..% above/below percent(Should be written in figures and words) of the estimated rate

mentioned above. Amount of my /our tender works out as under.

(A) Estimated amount put to tender Estimated amount put to tender

(B) Deduct………% below Add………% below

(Rs. in Words __________________Only). (Rs. in Words __________________Only).

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5. Credit of dismantled materials of amount of Rs…............................... must be recovered from Contractor's first R.A Bill.

Dated Signature of Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R & B) Sub Division Panchayat (R & B) Division ion