WBPWD/EE/BNWD/NIT24e/2025-26/3

Making a conference room at the vacated place of Fire and Emergency Services Department under Department of Disaster Management & Civil Defence, 2nd Floor, South Block,Bikash Bhavan,Saltlake , Kolkata-700091.

Item Rate BoQ

BoQ_Ver3.0

anshu66

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

S/F/F textile fabric windows covering as approved fixed in 40 mm dia powder coated aluminium roller bar supported in 50 mm dia P.V.C. pully along with

S/F/F High density lesser cutting carbon fibre board ( Charcoal board) (8 mm Thick) of approved design etc.

Flim eatching on clear Glass.

Supplying, fitting, fixing Acrylic Wall Paper with adhesive and finished joints by beveled cut to give uniformity complete as per specification and direction of Engineer- in-Charge.

Percentage BoQ

BoQ_Ver3.0

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Dismantling carefully wooden walling, flooring of ceiling and stacking dismantled materials as directed.

Taking out Mirzapur or glazed porcelain tiles carefully bychiselling from walls or floor including stacking serviceable material as directed.

Dismantling all type of masonry excepting cement concrete plain of reinforced stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. 2nd floor

Stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish with in a lead of 75 m as directed. .

Cleaning the concrete surface by removing dirt and debris, marking defectivelocations and removing loose concrete by careful stripping untill hard surfaceis exposed, cutting the concrete to regular shape, wire brushing the exposedsurface and removing debris from site complete as per direction of theEngineer - in - Charge.

Cleaning the exposed reinforcement preferably upto full diameter by wirebrush, applying two coats of polymer based rust removing compound left for24 hours, removing the coating and then applying two (2) coats of polymermodified anti corrosive protective coating formulated to inhibit the corrosionof reinforcement as per manufacturer's specification] [Mode ofmeasurement:The affected surface area of reinforcement shall beconsidered for payment]

Removing corroded worn out portion of reinforcement (when the area of baris damaged by more than 25%) by cutting and replacing the same by a newplain round bar of requisite diameter by binding with required lap / weldingwith old bar, including cost of reinforcement, complete in all respectincluding removing unserviceable materials from site as per direction of theEngineer - in - charge. Note : Payment on weight (Kg.) of newreinforcement.

(a) Applying 2 coats of bonding agent with synthetic multi functional rubberemulsion having adhesive and water proofing properties by mixing with waterin proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer'sspecification [Cement to be supplied by the Department]

Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. b) 25 mm thick

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] 10 mm thick plaster with 1:4 cement mortar. 2nd floor

20 mm thick plaster with 1:6 cement mortar. 2nd floor

Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cementand colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal ofwax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all otherincidental charges complete true to the manufacturer'sspecification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be suppliedby the agency. (II) With Polymerised Adhesive [6 mm thick] & epoxygrouting materials for filling joints including spacer-2 mm[Applied directly over finished artificial stone floor/ mosaicetc.] 2nd Floor (A) Deep Colour & White

Supplying,Fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar(1:3)15mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m. & joint filling using white cement slurry @0.20kg/Sq.m. (b) Area of each tile the above 0.09Sq.m. (ii) Other than Coloured decorative including white. 2nd floor

(A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20 Kg/Sq.m. (b) Area of each tile the above 0.09Sq.m. (ii) Other than Coloured decorative including white. - 2nd floor

Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top,bottom and side member, intermediate member , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983and IS: 1285-1975, annodized conforming toIS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete asper architectural drawings and direction of Engineer-in-charge.( Excluding cost of glass/ panel board,10-12 Micron thickness Annodizing film.Natural white. for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90sqm 2nd floor

Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter ( top rail, bottom rail, lock rail,door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS:733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat,angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge.( Excluding cost of glass/ panel board, door spring/ All hinges, door closer, door stoper,handle, tower bolt and locking arrangmentetc)10-12 Micron thickness Annodizing filmNatural white

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987;(A) clear, toughened glass conforming to IS:2553-1992 (part-II) (i) 6mm thick

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium slidingWindow of all Aluminium sections viz. window frame (top,bottom & sideframe), shutter (top, bottom, side & interlock member) made of aluminiumalloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodisedconforming to IS 1868-1983, fitted with all other accessories viz. PVCroller, EPDM gasket, maruti lock, screws etc. including labour chargesfor fitting & fixing of aluminium 2-track/3-track sliding window withfixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge.10-12 Micron thickness Annodizing filmNatural white 2nd floor

Supplying bubble free float glass of approved make and brand. Conforming to IS: 2835-1987. (iv) 5 mm thick coloured / tinted / smoke glass.

Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer-in-Charge. (i) 150 mm.

Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mmtubular Handle with Grade 304, CE certified, marked & conforming to EN -1154, of approved quality of reputed brand as per direction of Eingineer-in-Charge fitted and fixed complete including all incidental charges.

Supplying heavy duty hyraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge.

Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thk top abrasive layerover a decorative layer followed by a High-density fibreboard(HDF) having density > 940 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than1000 kg/m) over a 2 mm thk underlayer polyurethene foam onpolythene sheet 250 micron, over a smooth, flat, hard subfloorfree from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile,reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate FloorAccessories only (Skirting, End edge, T- moulding, Reducer)shall have to be added separately, wherever requ (Add. above ground floor - 2nd floor)

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals). (e) sal : malayasian. - 2nd floor

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan orsimilar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor 35 mm thick shutters (single leaf) 2nd floor

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S.205/66) and fitted and fixed with cadmium plated screws: (ix) 300 mm long x 10 mm dia. bolt.

Anodise aluminium barred /tower/ socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.204/74 fitted and Fixed with cadmium plated screws: (ix) 300 mm long x 10 mm dia. bolt.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S.230/72) fitted and fixed complete: (a) With continuous plate base (hexagonal/round rod). (vi) 150 mm grip x 10 mm dia rod.

(B) Dressed wood work in post, plate, battens etc. fitted and fixed complete excluding the cost of the bolts only, but including the cost of nails, screws etc.)(The quantum should be corrected up to three decimals). (iii) Sal: malaysian. - 2nd floor

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde sythetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per designn as per approval and direction of Engineer-In-Charge.[ excluding the cost of supporting frame work and teak wood batten/ipping ] in 2nd floor. 12 mm.

Supplying fitting , fixing decorative lamination conforming to IS-2046 : 1995 as per approved make, brand , finish and thick ness with fitting, fixing the same on Particle / MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in-Charge. The rate includes the cost of labour, adhesive and all incidental charges thereof.Glossy/Matt/Suede excluding surface texture of metallic lustre. Thickness of laminate 1.5mm. 2nd floor

Scantling upto 50mm wide and 12mm thick (chamfering or rounding) forceiling/partion battens including fitting, fixing in position with washers, coach screws etc. complete. Ordinary teak

Providing and fixing of 15mm thick Mineral Fibre Acoustic Ceiling Tilesof approved pattern and size 595mm X 595mm should be placed in theGrid module to form a False Ceiling with NRC value ≥ 0.6 Materialclass: A2-s1, d0 as per EN 13501-1, Fire: REI – REI120 as per EN 13501-2, Surface Burning Characteristics: Class 1 or A as per ASTM E 84) withpowder coated exposed G.I. grid suspension system (interlocking T-Grid,having load carrying capacity with mid span deflection not exceeding1/360 span with hanger spacing of 1200mm c/c) consisting of MainRunner 3600 mm long, Cross Tee 1200 mm / 600 mm long and WallAngle. The Wall Angle shall be fixed on PVC Dash Fasteners on theperimeter of the wall by steel screws with distance 300mm c/c. The MainRunners to be placed @ 1200 mm. The Cross Tee 1200mm will beinserted in the pre-cut slots of Main Runner at a regular interval of 600mm to form a modular grid of 1200mm X 600mm. Additional Cross Teesof 600 mm shall be placed perpendicular to the Cross Tee (Add. above ground floor - 2nd floor)

(b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers, including fitting and fixing complete.

(b) Rendring the surface of walls and ceiling with white cement based wall putty of approved make and brand (15mm thick).

Applying exterior grade Acrylic primer of approved quality and brand on plaster or concrete surface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly complete as per manufacturer's specification and as per direction of the EIC. one coat. (i) water based interior grade Acrylic primer. 2nd floor

Applying acrylic emulsion paint of approved make and brand on walls and ceiling including sand papering in intermediated coats including putty ( to be done under specific instructions of superintending engineer): (two coats). (i) standard quality. 2nd floor

Supplying, fitting and fixing PVC pipes of approved make of of Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pi;es as per IS:1239 (Part-I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting piles, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made seperately). For Exposed Work PVC Pipes. 25 mm.

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I marking with fittings(tested to 21 kg per sq.cm.). (Note: Item (vii),(viii) and (ix) to be done as per specific direction of the Engineer-in-charge). 25 mm.

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc.

Wash basin white vitreous china of approved make (without fittings) supplied, fitted and fixed in position on 75mm X 75mm X 75mm wood blocks and C.I. Brackets including two coats of painting of C.I. Brackets. 630 mm x 450 mm size.

Supplying, fitting and fixing bib cock or stop cock. Chromium plated plated Bib Cock with wall flange (Equivelent to Code No.5047 & Model- Florentine of Jaquar or Similar brand).

Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model- Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing shower of approved brand and make. Hand shower(Health Faucet) with 1mtr Fexible Tube with wall Hook (Equivalent to code No.573 & Model-ALLIED of Jaquar or Similar)

Providing and fixing concealed cistern of size 380 mm long, 400 mmwide, 100 mm thick alongwith flush plate and flush pipe with minimumdistances of 37 mm from wall face with concealed fittings arrangement ofapproved quality with all fittings and fixtures complete, including cuttingand making good the walls wherever required. Model: Cento of Hindwareor similar brand. [Note: This work should not be executed withoutspecific permission of Superintending Engineer.]

Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap (with vent).

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws supplied, fitted and fixed complete. Anglo-Indian . Plastic (hallow type) white.

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm.

Supplying, fitting and fixing towel rail with two brackets. C.P. over brass. 25 mm dia. and 600 mm long.

Supplying, fitting & fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P.nut, 15mm dia. 750 mm long.

Supplying, fitting and fixing pillar cock of approved make. CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (CodeNo.5041 & Model - FLORENTINE of JAQUAR or similar brand).