Baghtan_Equipment_BioControl

B.O.D. Incubator (Biochemical Oxygen Demand incubator)

✔ Double-walled chamber with inner chamber made of SS 304 and outer body of powder-coated mild steel or stainless steel. ✔ Temperature range: 5°C to 60°C with ±0.5°C accuracy; capable of maintaining 20°C ±1°C precisely for BOD testing. ✔ Temperature control: Microprocessor-based PID digital controller with PT-100 (Class-A) sensor, ensuring ±0.5°C accuracy and ±0.5°C uniformity throughout the chamber. ✔ Cooling system: Hermetically sealed, CFC-free refrigeration using eco-friendly refrigerant (R-134a / R-290 or equivalent); automatic defrost system preferred. ✔ Heating system: Low-wattage stainless-steel tubular heaters designed for uniform heat distribution. ✔ Digital temperature controller-cum-indicator with LED display. ✔ Display and control: Digital temperature controller-cum-indicator with LED display for set and actual values. ✔ Air circulation: Forced air circulation by axial/blower fan to ensure uniform temperature across the chamber. ✔ Capacity: 320 liters. ✔ Power supply: 230 ±10 V AC, 50 Hz, single phase. ✔ Insulation: High-grade PUF insulation between the two walls to ensure thermal efficiency.

Vertical Autoclave

✔ Type & Loading: Vertical cylindrical, top-loading autoclave. ✔ Construction: Inner chamber and outer jacket made of SS 304/316; lid SS-316 with double safety valve and pressure gauge; neoprene/silicone gasket for effective sealing. ✔ Working Temperature & Pressure: 121°C ±1°C at 15 psi (1.05 kg/cm²) ±5% or higher, as per BIS standards. ✔ Heating System: Heavy-duty stainless steel tubular immersion heaters with automatic cut-off to prevent dry heating. ✔ Lid Locking: Foot-operated radial lock lid with silicon gasket. ✔ Pressure Control & Safety: Automatic pressure control with digital indicator, spring-loaded pressure relief, safety valve, and manual air release valve for controlled steam discharge. ✔ Pressure Gauge: Bourdon type, range 0–30 psi, clearly readable. ✔ Temperature Control & Display: Microprocessor-based PID digital controller with LED/LCD display for set and actual temperature, thermocouple sensor for monitoring, and timer for sterilization cycle control. ✔ Capacity: 90 liters. ✔ Water Level & Safety Features: Low water level cutoff system with indicator, alarm for low water level, and safety devices to prevent overheating and over-pressurization. Power: 230 ± 10 V AC, 50 Hz, single phase. ✔ Power Supply: 230 ±10 V AC, 50 Hz, single phase. ✔ Control Panel: Mounted on body with on/off switch, pilot lamps, indicators, pressure gauge, timer, and temperature control knob. ✔ Insulation: High-grade glass wool/mineral wool insulation to minimize heat loss and energy consumption.

Horizontal Autoclave

✔ Type & Orientation: Horizontal cylindrical, front-loading autoclave, floor-mounted. ✔ Construction: Chamber made of high-grade SS 304/316 with polished inner surface; outer jacket SS 304 with proper insulation; high-grade mineral wool/glass wool insulation between chamber and jacket. ✔ Door System: Horizontally hinged radial locking door made of SS 304/316 with heat-resistant silicon gasket. ✔ Capacity : 80 liters ✔ Working Temperature & Pressure: 121–134°C at 15–20 psi (1.05–1.40 kg/cm²). ✔ Heating System: High-efficiency tubular immersion heaters with automatic low-water cut-off protection. ✔ Steam Source: In-built steam generator/boiler with automatic water level control. ✔ Pressure Control & Safety: Automatic pressure control with digital indicator, spring-loaded safety valve, manual air release valve for controlled steam discharge; door safety interlock to prevent opening under pressure; low-water level cutoff system and alarms. ✔ Temperature Control & Display: Digital/PLC-based control panel with LED/LCD display for set and actual temperature, pressure, and sterilization time. ✔ Sterilization Cycle: Adjustable 0–99 minutes. ✔ Pressure Test: Hydrostatic testing up to 2.5 kg/cm². ✔ Accessories: SS baskets/trays, drain valve, steam trap, vacuum breaker, pressure relief valve. ✔ Power Supply: 440 V ±10%, 50 Hz, 3-phase AC (connected load approx. 6–12 kW).

Hot Air Oven

✔ Equipment Type: Electrically operated, laboratory-type hot air oven (bench-top / floor model). ✔ Chamber Construction: The oven features an inner chamber of stainless steel (SS 304), an outer body of mild steel with powder coating or SS 304, high-density mineral wool/glass wool insulation between the walls to minimize heat loss, and removable/adjustable perforated stainless-steel trays (minimum 2–3). ✔ Temperature Range: Ambient +5°C to 250°C(±2°C) or higher. ✔ Temperature Control & Accuracy: Digital PID temperature controller with LED/LCD display; PT-100 sensor; accuracy ±1°C; uniformity ±1°C throughout the chamber. ✔ Heating System: High-efficiency stainless steel tubular air heaters located for uniform heat distribution. ✔ Air Circulation System: Forced air circulation using high-speed motorized blower/fan for even temperature distribution ✔ Door Design: Front-opening insulated door with heavy-duty hinges and silicon gasket; optional viewing window. ✔ Control Panel & Display: Digital display showing set and actual temperature; indicators for power, heating, and blower operation. ✔ Safety Features: Over-temperature protection with automatic cut-off; fuse protection; automatic power cut at high temperature. ✔ Capacity:224 liters. ✔ Power Supply: 230 ±10 V AC, 50 Hz, single phase

Water Distillation Unit (Double Distillation)

✔ Equipment Name: Double Water Distillation Unit (Laboratory Type). ✔ Purpose / Application: To produce high-purity distilled water free from minerals, ions, and impurities for preparation of culture media, reagents, and other laboratory applications. ✔ Type: Electrically operated, automatic, wall/bench/floor-mounted double distillation unit. ✔ Construction Material: Boiler and condenser made of high-grade borosilicate glass (Pyrex) or quartz; stand/frame of powder-coated mild steel or stainless steel (SS 304/316) for corrosion resistance; chromium-plated or stainless steel tubular heating elements; all joints heat-resistant and leak-proof. ✔ Output Capacity: Minimum 4 liters/hour per unit. ✔ Water Quality: Conductivity <10 µS/cm; pH 6.0–7.5; pyrogen-free suitable for microbiological and analytical use. ✔ Heating System: High-efficiency immersion heaters with automatic cut-off on low water level; easily replaceable; energy-efficient. ✔ Heating System: High-efficiency immersion heaters with automatic cut-off on low water level; easily replaceable; energy-efficient. ✔ Water Supply Requirement: Minimum inlet flow rate and pressure as per manufacturer; inlet/outlet connections with drain valve. ✔ Controls & Safety Features: On/off switch with indicator, automatic water level cut-off, thermal cut-out protection, fuse protection, low water level alarm, automatic restart after water resumes. ✔ Power Supply: 230 ±10 V AC, 50 Hz, single phase; 3–6 kW depending on capacity. ✔ Accessories: Connecting tubes and fittings, power cord and plug, spare heating element, operation and maintenance manual.

Analytical Balance

✔ Equipment Name: Digital Microprocessor-Based Analytical Balance (top loading / internal calibration type). ✔ Weighing Capacity: Minimum 1 mg (0.001 g) to 200 g or higher. Readability: 0.1 mg (0.0001 g). ✔ Readab

Fermenter (Bench-top Type)

✔ Equipment Name: In-Situ Sterilizable Laboratory Fermenter ✔ Purpose / Application: For cultivation and scaling-up of microbial or fungal cultures under controlled conditions of temperature, pH, dissolved oxygen, agitation, and aeration in the Bio-Control Laboratory. ✔ Total Capacity: 10 Liters ✔ Working Volume: Up to 7.5 Liters ✔ Type: Bench-Top, In-Situ Sterilizable Type. ✔ Materials of Construction (M.O.C.): Vessel Contact Parts – SS 316 L; Non-Contact Parts – SS 304; Vessel Jacket – SS 304 with glass viewing window. ✔ Top Flange / Plate: SS 316 L construction with ports for pH/DO₂/temp/heater/sample/feed/inoculation, acid/base/antifoam/air and exhaust condenser etc. ✔ Condenser: Shell-in-tube SS 316 exhaust condenser with 0.22 µ PTFE filter for exhaust air filtration and cold-water inlet/outlet for cooling vapours. ✔ Baffles: Four nos., removable type, SS 316 construction. ✔ Agitation System: Top-driven direct-coupled mechanical seal drive with Rushton turbine impellers (3 nos., 6-blade, SS 316); Variable speed 50 – 1000 RPM (microbial) / 20 – 500 RPM (cell culture); Servo/AC motor 400 W with VFD, accuracy ±1 RPM. ✔ Temperature Control: Range 0 – 150 °C; Control accuracy ± 0.2 °C; Sensor – PT100 RTD; PID based heating and cooling with in-built SS 316 heating element (300 W) and SS cooling coil for chilled-water circulation. ✔ pH Measurement & Control: Range 0–14 pH; Accuracy ± 0.1; Online gel-filled pH probe (autoclavable at 121 °C, 15 psi, SS housing); Automatic control using two peristaltic pumps for acid/base addition with manual override; 2-/3-point auto calibration. ✔ Peristaltic Pumps: Four nos. (for acid, base, feed and foam addition) with silicone tubing and borosilicate feeding bottles (4 nos.) ✔ DO₂ Measurement & Control: Online SS DO₂ probe (autoclavable, range 0–100 %); Imported probe Broadly James USA / JUMO Germany or equivalent with transmitter. ✔ Foam / Level Control: Automatic antifoam control with probe, sensor, and dedicated peristaltic pump. ✔ Software & Control System: PLC based high-speed controller with 7” HMI touch screen display for pH, DO₂, temperature, agitation etc.; data-logging software with USB port for data transfer to PC in Excel format; features include trend/history graphs, alarms, user login levels, report generation. ✔ Utilities and Accessories: Complete SS 316 L piping, valves, pressure gauges, safety valves, non-return valves, relief valves, filters and silicone tubing etc.; supplied with electric boiler (12 kW, 20 kg/hr), chiller circulator (5–6 L tank, temp range 5 °C below ambient), and oil-free air compressor (30 L tank, auto cut-off). ✔ Power Requirement: 230 V ± 10 %, 50 Hz AC single phase. ✔ Certifications: ISO 9001:2015, ISO 14001:2015, ISO 13485:2016, IEC 61010-2-040:2020, WHO-GMP & CE certified

Horizontal Laminar Air Flow Cabinet

✔ Equipment Name: Horizontal Laminar Air Flow Cabinet (Laboratory Type). ✔ Purpose / Application: Designed to provide a sterile working environment for aseptic operations, culture transfer, and microbial work in the Bio-Control Laboratory. ✔ Type: Electrically operated, bench-top / floor-mounted, horizontal air flow type laminar cabinet. ✔ Construction: Outer body made of CRCA sheet duly powder coated or stainless steel

(SS 304). Inner working chamber made of high-grade stainless steel (SS 304) with smooth, jointless finish for easy cleaning. ✔ Work Table: Stainless steel (SS 304) work surface, perforated or solid, vibration-free, and easy to sterilize. ✔ Air Flow: Horizontal laminar flow of clean air at a velocity of 90 ± 20 feet per minute (FPM) providing uniform air movement across the work zone. ✔ Filtration System: Pre-filter: Washable synthetic media type filter for coarse filtration(up to 90% efficiency at 5 µm). HEPA Filter: High Efficiency Particulate Air (HEPA) filter with minimum efficiency of 99.97% for 0.3 micron particles. ✔ Illumination: In-built fluorescent lighting providing minimum 800 lux illumination inside the work area. ✔ UV Germicidal Lamp: Germicidal UV-C lamp (254 nm) fitted inside the cabinet for sterilization of work zone; interlocked with blower and fluorescent light for safety. ✔ Blower / Motor Assembly: Dynamically balanced, low-noise, maintenance-free motor-blower assembly ensuring uniform air flow and noise level ≤65 dB. ✔ Front Door / Sash: Transparent acrylic / polycarbonate front shield with counterbalanced mechanism or hinged arrangement for operator safety and visibility. ✔ Working Chamber Size: Minimum 4 ft × 2 ft × 2 ft (W × D × H) or higher. ✔ Noise & Vibration: Noise level ≤65 dB and vibration-free operation. ✔ Safety Features: UV interlock with fluorescent light and blower; automatic UV timer; low vibration, low noise; protection against accidental UV exposure. ✔ Power Supply: 230 ±10 V AC, 50 Hz, single phase.

Digital Stereo Trinocular Microscope with Digicam Projection System

✔ Equipment Name: Digital Stereo Trinocular Microscope with Built-in Digicam Projection System. ✔ Purpose / Application: For observation, identification, and documentation of bio-control agents, insect morphology, fungal and microbial cultures under high-quality stereo magnification in the Bio-Control Laboratory. ✔ Type: Trinocular stereo zoom microscope with integrated digital camera and built-in projection system mounted on microscope top. ✔ Microscope Body: Robust, ergonomic design with rigid stand and smooth focusing mechanism; anti-fungal optical coating on all lenses. ✔ Observation Head: Trinocular head, 360° rotatable, 45° inclined for convenient viewing; diopter adjustment on both eyepieces; provision for digital camera projection on top of the microscope. ✔ Eyepieces: Wide-field eyepieces WF10× or WF15×, field number ≥20 mm, paired and focusable. ✔ Objective Zoom Range: Zoom ratio minimum 6.3:1 or higher, covering magnification range from 0.7× to 4.5× or higher; total magnification up to 180× with optional auxiliary lens. ✔ Working Distance: Minimum 100 mm or higher. ✔ Illumination: Built-in LED transmitted (bottom) and incident (top) illumination with intensity control; long-life, cool, shadow-free light source. ✔ Stage: Black & white contrast stage plate and frosted glass plate with spring-loaded specimen clips; suitable for Petri plates and slides. ✔ Focus Mechanism: Coarse focusing knobs on both sides with tension adjustment and smooth rack-and-pinion movement. ✔ Digital Camera (Built-in): High-resolution integrated digital camera (minimum 10 megapixels or higher) with CMOS sensor and high frame rate for live imaging, built into the microscope top with in-built image projection system for real-time demonstration and training, and USB / HDMI connectivity for direct display on computer or LCD monitor. ✔ Imaging Software: User-friendly software for live viewing, image capture, annotation, measurement, and storage; compatible with Windows operating system. ✔ Projection System: Integrated projection system located on microscope head for real-time projection of live images onto computer or display screen without external adapters. ✔ Accessories: Dust cover, calibration slide, power cord, connecting cables, operation and maintenance manual. ✔ Power Supply: 230 ±10 V AC, 50 Hz, single phase.