CWE/AMB/NORTH-18 OF 2022-23 SPECIAL REPAIRS TO BLDG NOS T-10 T-11 T-15 T-25 T-26T-27 T-28 T-29 T-34 T-36 T-37 T-38(OTM ACCN) AND T-166 (OR TOILET BLOCK) OF 7 SIKH LI UNDER GE NORTH AMBALA CANTT

Amount

SCHEDULE A PART I (B/R WORKS) Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings or wall cladding and removal of dismantled material outside defence land complete all as specified and directed.

Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated steel sheet, 0.50mm thick, conforming to IS-15961, of any colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.

Supply and fixing for pre-painted galvalume, aluminuim zinc coating, GI based Plain steel sheet, 0.50mm thick, of any colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.

Dismantling structural steel work of any description including doors, gates framed truss etc including removal from site, complete all as specified and directed.

Material and labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.

Material and labour for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., conforming to Fe-290.Gde-E-165 complete all as specified and directed.

Material and labour for anodised aluminium snap grid frame powder coated work of size 605mmx605mm for false ceiling including fixing of arrangement including hanging. The snap grid shall be consist of aluminium main/cross tee of size 24mm x 32mm x 0.30mm and wall grid angle 15mm x 32mm x 0.30mm thick. The snap grid frame shall be fixed to ceiling with supporting hanger consisting of 4mm dia GI wire with necessary bolt and nuts andf washers including adjustable fastner, including laying 4mm thick designer decorative type asbestos cement ceiling board (E board) including two coats of acrylic emulsion paint over a coat primer, complete all as specified and directed.

Dismantaling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description, in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) and removal of debries to distance exc 250 mtr but n exc 500 mtr complete all as specified and as directed.

Material and labour for 75mm thick, PCC (1:4:8) type D2 (using 40 mm graded stone aggregates), as in sub base of floors, finished rough and even to receive floor topping complete all as specified and as directed.

Material and labour for machine cut kota stone slab 18-20 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 15mm thick in cement mortar (1:4) base and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick laid on vertical surfaces or skirting over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surfaces and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed. Note:- Size of slab shall be cut as required.

Material and labour for 50mm thick, PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate), as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonary, built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed.

Material and labour for brickwork, with old size bricks, straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for brickwork, with old size bricks, straight or curved on plan to any radius, built in cement mortar 1:6 except bricks using old bricks retrieved from item No 14 including cleaning and washing complete all as specified and as directed.

Taking down cement plaster including raking out joints hacking for key, scrubbing down with water etc, and removal of debries to distance exc 250 mtr but n exc 500 mtr complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without extra cement all as specified and as directed.

Material and labour for for rough cast plastering including 15mm thick rendering in cement plaster 1:3 complete all as specidied in SSR Part-I clause 14.22 as given. Note: Rough cast finish: After applying under coat of cement mortar 1:3 not less than 10mm thick and while still it is in platic state the rough cast mixture consisting of crushed stone or fine gravel aggrigate. Which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ration 1:1 shall be applied complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying two coats of oil bound distemper with painting roller over 2mm thick wall putty complete all as specified and as directed.

Material and labour for complete removal of existing treatment on old/existing wall surfaces by using appropriate technique as approved by Engr-in-charge and applying two coats of cement base paint complete all as specified and as directed.

Material and labour for complete removal of existing treatment on old/existing wall surfaces by using appropriate technique as approved by Engr-in-charge and applying two coats of oil bound distemper with painting roller over 2mm thick wall putty over a coat of primer complete all as specified and as directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Supply and fixing of double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutter fabricated from following sections:- (a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos ie. 01 for glazed shutter and 01 for gauzed shutter). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces. (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mmx25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T-section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf. (c) Vertical mullion shall be ERW hollow T-section of size 60 x 25 mm made from 1.25 mm thick MS sheet. (d) The above steel window shall be deemed to include the following accessories/ fittings:- Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape-04 Nos per window, Handle of Z section 20mmx25mm of 100mm length-01 No per leaf, MS tower bolt stove enamelled 150mm long-2 Nos per leaf, Z section 20mmx25mm of 100mm long stopper-01 No per leaf, Cleat 55 mm long of solid square 15x20x.63mm square-01 No per leaf, Pintal hinges 12 x 75 mm-2 Nos each leaf, 10mm square Guard bar @ 10 cm c/c welded to frame as per pattern as directed, two coat of Synthetic enamel paint over one coat of red oxide primer, 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 3 mm with steel screws & 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window. (e) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.

Notes: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above. (iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. (iv) All other details shall be referred from drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone. The drawings may be referred from GE office or from this office during working hours.

Supply and fixing for framed work as in door of angle or other section with gusset plate , rails , braces, etc complete drilled for fixing of steel sheeting or other covering,door etc, to be prepared hanging or sliding with and including either hooks and hinges or steel hanging door fitting and hanging also fastening and fixing including one shop coat of zink chromate primer paint confirming to F-410W Gde-250 A complete all as specified and directed.

Supply and fixing 40 mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. Note: Manufacturers test certificate shall be submitted before incorporation.

Material and labour for 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed. Note:- Wood shall be kiln seasoned and chemically pressure treated.

Supply and fixing of factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in pening as per specification & drawing complete all as specified and as directed.

Supply and fixing of Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

Material and labour for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Material and labour for 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing MS butt hinges 100 mm long medium weight and fixed complete all as specified and directed.

Supply and fixing of aluminium alloy anodised, 250mm long, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for preparing new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, over a coat of red oxide zinc crome primer complete all as specified and as directed.

Supply and fixing in repairs of curtain rod, 20mm dia, brass chromium plated and fixing with decorative brackets and finial at the end complete all as specified and directed.

Material and labour for preparation of old steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, complete all as specified and as directed.

Material and labour for RCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately.

Material and labour for mild steel TMT bars Fe 500/550 D, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars Fe 500/550 D, 8mm dia and over, as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of unreinforced cement concrete of any description and in any position such as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work removal of debries to distance exc 250mtr complete all as specified and directed.

Material and labour for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) as in coping, benching, bed blocks and the like including necessary form work and weathering, slightly rounded or chamfered angles and throating and finishing exposed surfaces of concrete fair and even complete all as specified and as directed.

Material and labour for use and waste of formwork to sides and soffits of roof beams, cantilever, bressummers lintels, shelves including supports and similar work for rough finished flat surfaces of concrete complete specified and directed.

Material and labour for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide, for rough finished, flat surfaces of concrete complete all as specified and as directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.18 sqm and not exceeding 0.36 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, printed glazed coloured ceramic tiles of size 350 x 450 x 7mm thick on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:3), set, jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Supply and fixing in repair of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing in repair of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing in replacement of stop valves, 15mm bore, fancy type, chromium plated, with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing in replacement of stop valves, 15mm bore, fancy type, chromium plated, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing in replacement of bib taps, 15mm bore, long body, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule or union and fixed complete all as specified and as directed. Note : Weight of bib tap shall not be less than 0.575 Kg

Supply and fixing in repair of PVC connections, 450 mm long and 15mm dia with brass nuts and PVC washers on both ends complete all as specified and directed.

Supply and fixing in repair, vitreous china wash hand basin, white colour, flat back, of size 550x440mm, ISI marked, with 2 Nos.CI brackets embedded in cement mortar 1:4, PVC waste pipe, 45cms long, fixed to walls, 15mm dia PVC connections and chromium plated waste coupling, etc.,including taking down/removal of existing unserviceable wash hand basin of any description and size and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

Supply and fixing in repairs of 15mm bore pillar tap, chromium plated, cast copper alloy with capstan head, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks complete all as specified and directed.

Supply and fixing in repairs, vitreous china squatting pan of Orissa pattern, size 580mmx440mm, white (Ist quality) with ‘P’ or ’S’ trap of PVC, with front or back inlet and integral foot rests of any pattern including provision of lime concrete bedding for fixing and making good to existing floor surface to match with the existing surface and connection to flush pipe, trap, anti syphonage pipe, etc including taking down and removal of existing unserviceable squatting pan of any description and size complete all as specified and directed.

Supply and fixing in repairs of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, 45cm PVC connection with PVC bend/flush pipe complete and making all connections including taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed.

Supply and fixing in repairs of PVC floor trap, 100mm size, with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed.

Supply and fixing in replacement of 110mm dia UPVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Supply and fixing of PVC (SWR) bends,110mm bore, of any radius complete all as specified and directed.

Supply and fixing in repair, water storage tank of 500 ltr capacity, HDPE double layer, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, ball brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete all as specified and directed. Note:- Make of tank shall be engraved on the tank and colour of the tank shall be white.

Supply and fixing in repair of 15mm bore, gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixing in repair of stop valves, 20mm bore, gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4 ) type B-1 smooth finished, and reforming benching as required for pipes of internal dia of 100mm complete all as specified and directed.

Supply and fixing in repair of brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for foundation etc. of manholes, cesspits, shaft wells, etc. complete all as specified and as directed.

Removing excavated soil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick (compacted thickness) rolled, watered and well rammed to a true surface complete all as specified and as directed.

Material and labour for precast cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates, in window or door cills, lintels, bressumers, string courses, copings, kneelers, apex stones, pier caps, colunms, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, mcludillg chamfers/weatherings, throating etc. and setting in mortar cement mortar (1:4) with joints to match and set in complete all as specified and directed.

Supply and fixing in replacement of 110mm dia UPVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, laid in trenches complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Material and labour for plain mild steel wire, 4mm dia, galvanised class 3, in fencing including straining and fixing to wood, concrete steel posts and/ or to Supply and fix straining bolts, including securing with and including of galvanised iron tying wire, gaIvanised. iron staples or steel pins, etc. as directed (each line of wire to be measured) complete all as specified and as directed.

Material and labour for rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe- 290 (Gde E- 165) complete all as specified and as directed.

Material and labour for mild steel rag lewis bolts, with 12mm dia of neck, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged lewised, exceeding 30cm long complete all as specified and directed.

Material and labour for cutting holes into or through brick walls, built in cement mortar, of required superficial area not exceeding 150 sq. cm, and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Supply and fixing of Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregates, as in foundation filling and mass concrete, complete all as specified and directed.

Material and labour for machine pressed, vibratory compacted, precast concrete coloured (using red colour pgment), rubber moulded, interlocking designer paver blocks, confirming to IS-15658-2006, 60mm thickness, of M-35 grade, as in path, hard standing, etc. laid over and including 25 mm thick bedding layer of sand well rammed complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and as directed.

SCHEDULE A PART II (E/M WORKS) Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 20mm dia and its fittings, including cutting chasing on wall/ceiling, including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked, including 1.5 sqmm single core PVC insulated and unsheathed FRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with and including MS flush boxes of 2 to 18 modules with inner and outer cover plates, confirming to IS 5139 of 1969 and IS 14772 of 2000 for fixing modular switch sockets for one light point (light point//fan point/bell point controlled by one one way switch complete all as specified and as directed. Notes :- (i) Switch, socket, ceiling rose, lamp holder, bell, bell push and fan regulators to be measured and paid for separately. The quoted rates are deemed to be included for providing cover plates and MS flush boxes as required at site. (ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces. (iv) The concealed conduits and MS boxes as fixed against new point wiring, shall be verified by JE/Engineer-in-Charge before making good the surfaces by plastering and other finishes.

Description all as per Srl item No. 84.00 here in before but for one 3 pin socket outlet point 5 Amp on Independent board.

Description all as per Srl item No. 84.00 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per serial item No. 84.00 above, but with 4 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, for one socket point 15 Amps, 1100 volts grade, ISI marked, including 4 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.

Supply and fixing of switch modular, 6 Amps, one way, one module, flush type, single pole, 230 volt, ISI marked complete all as specified and directed.

Supply and fixing of switch modular, 16 Amps, one way, two module, single pole, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of socket modular, 2/3 pin, 5/6 amps, one way, two module, single pole, 230 volts complete all as specified and directed.

Supply and fixing of socket outlet, modular, 3/3 pin (6 pin), 6/16 Amps, one way, two module, single pole, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of electronic fan regulator, modular, 100 watt, two module suitable for ceiling fan, any type/make/sweep complete all as specified and as directed.

Supply and fixing of ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and as directed.

Supply and fixing of lamp holder, insulated body, with back plate for angular batten fittings with one PVC block of size 75mm x 75mm for mounting the fittings with and including one LED 9 watt lamp complete all as specified and as directed.

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10KA, 'C' curve, 6 to 40 Amps, ISI marked including taking down and removal of old unserviceable MCB of any capacity and type complete all as specified and as directed.

Supply and fixing of RCBO, 40 Amps capacity , 2 module, 300mA (HI immunity) sensitivity, 230 volts, 50 Hz, ISI marked including taking down and removal of old unserviceable RCBO of any capacity and type complete all as specified and directed.

Supply and fixing in repair of over voltage release, 230 volts, single phase, in one module suitable for single phase complete all as specified and directed.

Supply, insatallation, commissioning and testing of distibution board for MCBs, SPN, 8 way, acrylic double door, IP 43, as per IS 8623, 240 volts, with and including 200 amps fully insulated copper bus bar fixed on wall duly grouted in solid block wall with and including copper lugs/thimbles duly crimped for connection including taking down and removal of old unserviceable MCB DB of any capacity, size and type complete all as specified and directed.

Supply and fixing of DB, vertical type, 4 way, TPN, double door, powder coated with and including 200 Amps rated bus bar, with and including MCCB TPN 100 Amps including wiring for fixing MCB and connecting using of copper timbles/lugs of rating of MCB TPN including taking down and removal of old unserviceable MCB DB of any capacity, size and type complete all as specified and directed.

Supply and fixing in replacement of indoor decorative surface mounting LED tube light fitting, batten type, with opal diffuser, high efficient aluminium housing body in CRCA body suitable for LED tube, high efficient, AC 220-240 volts, 50 Hz with and including 18/20 watt LED tube rod luminaries (warm/cool as per site requirement), environment friendly, high efficient, T8 with aluminium extrusion, heat sink and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting including disconnecting and taking down of existing light fitting and removal complete all as specified and as directed.

Supply and fixing mirror light, 9/12 Watt LED wall fixture light luminaire, compact and energy efficient, epoxy powder coated, CRCA sheet including disconnecting and taking down of existing light fitting and removal complete all as specified and as directed.

Supply and fixing of LED security light luminaire 45 watt , made up of die cast aluminum housing with black epoxy powder coatingwith cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of MS pipe heavy grade, 25mm bore of length 0.90 metre with MS clamps, bolts, nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using cable including disconnecting and taking down existing light fitting and removal complete all as specified and as directed.

Supply and fixing in replacement of recess mounting LED 15/18 watt circular down lighter/spot light designer COB panel with aluminium die cast housing, high efficiency diffuser, 240 volts, 50 Hz, AC supply complete with all accessories, internally prewired including connecting with 3 core flexible copper conductor cable from from ceiling rose to connector of light including disconnecting and taking down existing light fitting and removal complete all as specified and as directed.

Supply and laying of LT underground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 2 core, 10 Sqmm and laying in trenches including disconnecting and taking down of old unserviceable existing cable and removal complete all as specified and as directed. Note:- Excavation and earth work shall be measured and paid separetely.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable complete all as specified and as directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.Note:- Punned thickness 18cm shall be measured for payment purposes.

Supply and laying un-reinforced, precast concrete cable cover, class LV type 1, Flat, with peak, size 250 mm x150 mm x40 mm complete all as specified and as directed.

Supply and fixing of light grade, GI tubing, of size 40mm dia, for cable protection and fixed with clamp to pole and wall with nuts and bolts including taking down old tubing as existing on site complete all as specified and as directed.

Material and labour for new earthing complete with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 15mm dia (medium grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion including taking down of old earthing as existing on site, complete all as specified and directed.

Taking down fan any type/description, after disconnecting all electrical connections carefully, sealing cable end, dismantling blades and removing fan and material and labour for scrapping old paint, cleaning dust and washing with washing powder, filling cavities with filler, spray painting complete fan with two coats of synthetic super enamel paint, writing MES No with black colour permanent marker and hanging the fan at the existing or new location and making all electrical connections using 3 core copper flexible cable drawn through flexible PVC conduit pipe and testing complete all as specified and directed.

Note:- Amount of credit of Rs. 225096.00 for retrieved materials is mentioned in Schedule of Credit Page Nos.17R & 18R of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S SHANTI CONSTRUCTION

Swami Enterprises

K.M CONSTRUCTIONS Co.

KULWANT SINGH

ANIL CONSTRUCTION CO.