CA NO. CWE/HILLS/RKT/144 OF 2025-2026 REPAIR/ RESURFACING TO ROAD INCLUDING ROAD SIDE BERMS, INTERLOCKING TILES AT VARIOUS LOCATIONS UNDER GE RANIKHET

Amount

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning and cleaning surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed.

M&L for applying evenly a priming tack coat of bitumen VG-10 grade @5Kg/10 Sqm by mechanical sprayer complete all as specified and directed.

M&L for Bituminous premixed asphaltic semi-dense concrete 30mm thick (consolidated thickness) with 5.5% binder (Paving bituminous VG-30 Grd) content by weight of total mix including rolled with 8 to 10 tonne power roller and compacted to required chamber and gradient complete all as specified and as directed by Engineer-in-Charge.

Demolition of hard core in ground floors and berms complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level)

M&L for 200m thick (spread thickness) soling (or sub base) with broken boulders or quarried stones (granite or trap or basalt stones) of size rang 100mm to 150mm, deposited, spread, levelled in one layer, interstices filled, surface formed, rolled and consolidated to required gradient and chamber with 8 to 12 tonne power roller, complete all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base to flooring, complete all as specified and as directed by Engineer-in-Charge.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; compllete all as specified and as directed.

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mnm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, in repairs complete all as specified and as directed.

S&F in repair, metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PAMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 x 150 x 300mm) type B1, complete all as specified and as directed.

M&L for laying hot applied thermoplastic compound (paint) 2.5mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T&P etc. required for proper completion of work incl all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No. 803 as per IRC. Painting lines, dashes, arrows, letters etc. on roads, pavements and the like n exc. 10cm wide with road marking paint, white or golden yellow complete all as specified and as directed.

bharat construction (BID ID -3516541)

R N KHARWAR & SONS (BID ID -3515803)