EI work for the Proposed G plus 4 building for Directors, Additional Directors Quarter Guest House with G plus 5 Storied foundation at the campus of WBJA Rajarhat SITC of 10 passenger LIFT and 16 pass Stretcher cum passenger LIFT

Amount

SITC of Automatic Lift (as per manufacturer design & as per detailed specification below conforming to relevant IS) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.

Make- Category-I lift manufacturer(OTIS/KONE/SCHINDLER) Type: Passanger Lift. Load : 10 Passenger / 680 Kg Control: Microprocessor based with serial communication controller in shaft & user interface in landing (VVVF) Machine Room:- Energy efficient machine, Gearless, without Machine Room Speed: 1.0 Mtrs./ Sec Floor served: G + 4 Landing: 5, all on same side Total Rise : 13.6 Mtr (approx) Operation: Microprocessor based simplex full collective with or without attendant. Signals: Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button. Button : All buttons on car & landing shall be luminous, on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation. Display type: Colour LCD / Segmented LCD/ LED Operation Push Button for lift maintenance & service should be on top of the car. Leveling accuracy: ± 5 mm (Micro levelling arrangement)

CAR Car inside: 1200mm ( W ) x 1400mm ( D ) x 2100mm (H) or as per OEM standard. Car Entrance: Clear Opening:- 800 mm (W) x 2000 mm (H ) protected with car door or as per OEM standard.

Car Finish & Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail. (a) Rear Mid Panel----Stainless Steel sheet (20 SWG) with Hairline finish (b) Rear corner Panel---Stainless Steel sheet (20 SWG) with Hairline finish (c) Side Mid Panel---Stainless Steel sheet (20 SWG) with Hairline finish (d) Side corner Panel---Stainless Steel sheet (20 SWG) with Hairline finish (e) Front Panel---Stainless Steel sheet (20 SWG) with Hairline finish

Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan

Car Ventilation: Cross flow Pressure fan with anodised aluminium grill.

Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order).

Car Door: Stainless Steel centre opening (COPD) automatic door provided with AC V3F controlled door drive system with full height infrared curtain of light and mechanical force limiting device,with fire rating of minimum 120 minutes. Landing Door: Stainless steel centre opening (COPD) automatic door provided with AC V3F controlled door drive system, with fire rating of minimum 120 minutes. Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor/ infrared detector.

PROTECTIVE DEVICES & OTHER ACESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others. Overload Protection: Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room Emergency Alarm: Battery operated alarm bell system in lift car and control room. Fireman switch: Fireman switch at main landing terminal. Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Car parking at top floor at idle condition. Main wire rope/ Belt - As per manufacturer's standard conforming to respective applicable IS Hand Rail: Stainless Steel mirror finish hand rails on rear car panels Auto Fan cut off.

DIMENSION OF SHAFT & POWER SUPPLY Available shaft dimension- 1900 mm (W) X 2100 mm (D) Pit Depth: 1600 mm or as per actual site condition. (Bidder should visit the site) Overhead: 4600 mm or as per actual site condition. (Bidder should visit the site) Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated at top landing as per IS

SITC of Automatic stretcher cum passenger Lift (as per manufacturer design & as per detailed specification below conforming to relevant IS) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.

Make- Category-I lift manufacturer(OTIS/KONE/SCHINDLER) Type: Stretcher cum passenger Lift Load : 16 Passenger / 1088 Kg Control: Microprocessor based with serial communication controller in shaft & user interface in landing (VVVF) Machine Room:- Energy efficient machine, Gearless, without Machine Room Speed: 1.0 Mtrs./ Sec Floor served: G + 4 Landing: 5, all on same side Total Rise : 13.6 Mtr (approx) Operation: Microprocessor based simplex full collective with or without attendant. Signals: Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button. Button : All buttons on car & landing shall be luminous, on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation. Display type: Colour LCD / Segmented LCD/ LED Operation Push Button for lift maintenance & service should be on top of the car Leveling accuracy: ± 5 mm(Micro levelling arrangement)

CAR Car inside: 1200mm ( W ) x 2100mm ( D ) x 2100mm (H) or as per OEM standard. Car Entrance: Clear Opening:- 900 mm (W) x 2000 mm (H ) protected with car door or as per OEM standard.

Car Finish & Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail. (a) Rear Mid Panel----Stainless Steel sheet (20 SWG) with Hairline finish (b) Rear corner Panel---Stainless Steel sheet (20 SWG) with Hairline finish (c) Side Mid Panel---Stainless Steel sheet (20 SWG) with Hairline finish (d) Side corner Panel---Stainless Steel sheet (20 SWG) with Hairline finish (e) Front Panel---Stainless Steel sheet (20 SWG) with Hairline finish

Car Ceiling & Lighting: Stainless Steel with hairline finish (#4) with LED lighting and Fan

Car Ventilation: Cross flow Pressure fan with anodised aluminium grill.

Car Flooring: Decorative granite flooring (As per direcion of EIC and according to this Department's Order).

Car Door: Stainless Steel centre opening (COPD) automatic door provided with AC V3F controlled door drive system with full height infrared curtain of light and mechanical force limiting device,with fire rating of minimum 120 minutes. Landing Door: Stainless steel centre opening (COPD) automatic door provided with AC V3F controlled door drive system, with fire rating of minimum 120 minutes. Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor/ infrared detector.

PROTECTIVE DEVICES & OTHER ACESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others. Overload Protection: Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room Emergency Alarm: Battery operated alarm bell system in lift car and control room Fireman switch: Fireman switch at main landing terminal. Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Car parking at top floor at idle condition. Car Parking at top floor at idle condition. Main wire rope/ Steel Belt - As per manufacturer's standard conforming to respective applicable IS Hand Rail: Stainless Steel Mirror Finish Handrails on rear car panels Auto Fan cut off.

DIMENSION OF SHAFT & POWER SUPPLY Proposed Shaft Dimension: 1900 mm (W) X 2950 mm (D) Proposed Pit Depth :1600 mm or as per actual site condition. (Bidder should visit the site) Proposed Overhead : 4600 mm or as per actual site condition. (Bidder should visit the site) Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated at top landing as per IS

(1) The Defect Liability period for the work is 1(one) year. (2) Rates should be quoted with minor civil works, wall cutting and mending good the damages to the original finish. (3) Necessary MS member e.g.; angle iron, MS channel brackets etc as required to be provided by the manufacturer. ( Rates are inclusive of all Taxes & duties incl. GST & LWC)

KONE ELEVATOR INDIA PRIVATE LIMITED (BID ID -6636688)

Otis Elevator Company(India)Limited (BID ID -6392429)