SEOP 39/2021-22

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)

Random rubble masonary/ polygonal rubble masonary(uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement, 6 sand, 12 graded stone aggregate 20mm NS) in cement mortar 1:6 ( 1cement, 6 sand)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete

Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platform

Stairs, (excluding landings) except spiral staircases

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand).

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/Neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-in-Charge. (Prepainted brown or White coloured)

P/F aluminium work for door, windows, ventilators & glazed partition frames with excruded built up standard tubular & other section of approved make confirming to IS 733 & IS 1285 anodised transparent or dyed.

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15).

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. (Only weight of grill to be measured for payment).

Providing and fixing aluminium work for doors, windows,board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading.

P/F glazing in aluminium door, window, ventilator shutters and partition etc. with PVC/ neoprens gasket etc. complete as per drawing with glass panes of 5.5mm thickness

P/F anodized aluminium sliding door bolt anodized colour & shade with bolts & nuts screws etc. complete (250*16mm)

P/F aluminium tower bolts ( berrel type) anodised transparent or dyed to required shade and colour with screws etc. complete

For doors (200*10mm)

For Windows (150*10mm)

P/F aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete

For doors (100mm)

For windows (75mm)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing bright finished hard drawn hooks and eyes 150 mm

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size 600*600mm

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar droppings and other foreign matter, sand papered smooth to give final matt finish to the surface complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powered materials

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Constructing course rubble hammer dressed "U" shape open surface drain with side wall 15 X 22 cm in cement mortar 1 : 6 (1 cement : 6 sand) and inside plastering with cement plaster 1 : 3 (1 cement : 3 sand) including earth work and laying 10 cm cement concrete in 1 : 5 : 10 (1 cement : 5 sand : 10 graded stone aggregate of 40 mm nominal size) and 7.5 cm cement concrete 1 : 2 : 4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

Coupler 75mm dia

PVC Plain bend 75mm dia

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):-

Providing and fixing PVC coloured/white automatic flushing cistern with a pair of PVC / C.I. or mild steel brackets, complete with fitting including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) 10 liters net capacity (Cera or Hindware make)

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings Flat back 550 x 400 mm (Cera or Hindware make)

Providing and fixing 32 mm dia, PVC waste pipe flexible (coil type) length not less than 800 mm.

Providing and fixing PTMT Hi quality dual hanging bath room mirror of 4 mm thick glass of approved quality and colour with steel screws and rawl plugs etc complete :- size 600 x 450 mm

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws. 600 x 20 mm

Providing and fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing C.P. Brass bib tap with Capstan head 15 mm dia (Cera or Hindware make)

Providing and fixing C.P. Brass pillar tap with Capstan head 15 mm dia(Cera or Hindware make)

Providing and fixing C.P. stop cocks 15 mm dia(Cera or Hindware make)

Providing and fixing PVC connection pipe with brass unions 300/450 mm length 15 mm nominal bore

Providing and fixing brass full way valve with wheel

15 mm nominal bore

25 mm nominal bore

Providing and fixing PVC floor trap ISI marked of self cleaning design including cost of cutting and making good the walls and floors etc. complete 110 x 75 mm (Diplast or Vectus make)

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (heavy grade) tube fittings and clamps including making good the wall, ceiling and floor. (TATA or Jindal make)

15 mm nominal bore

25 mm nominal bore

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete (Diplast or Vectus make)

110 mm dia

75 mm dia

Providing and fixing PVC Collar, ISI marked including fixing with approved adhesive etc. complete(Diplast or Vectus make)

110 mm dia

75 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110 mm(Diplast or Vectus make)

75 mm dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawl plugs etc. complete.

110 mm dia

75 mm dia

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap

Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5 and water tight C. I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg. 100mmx100mm size P type

Constructing brick masonry chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1 : 5 (1 Cement : 5 Sand) C.I. cover and frame (light duty) 355 x 610 mm internal dimensionsr, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) RCC top slab with 1 : 2 : 4 mix (1 Cement : 2 Sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1 : 5 : 10 mix (1 Cement : 5 Sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 15 mm thick with cement mortar 1 : 3 (1 Cement : 3 Sand), finished with a floating coat of neat cement on walls and bed concrete etc. complete Inside dimensions 455 x 610 x 450 mm deep single pipe line

Providing and fixing C.I. Covers Light duty rectangular 455 x 610mm with frame weight 38 Kg.( Single seal pattern):-

Providing and fixing PVC water storage tank of ISI : 12701 marked, G. I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level (Vectus or Diplast make)

1000 liters net capacity tank