ADDITIONAL WORK FOR STRENGTHENING SIAM AUDITORIUM BUILDING, KOTA

Amount

Fully Covered Sofa Set Structure made of pinewood good quality spring fited in structure seat bace cushnd seat cushen 125 mm 40 dencity back cushn 65 mm 32 dencity covered with quailty febric Upholestry

Supplying and Fixing of Conference Table top made out with 25 mm thick ISI MDF Board and Rest 17 mm thick MDF with flat edge Dully Sealed with PVC edge Beading of Matching Colour and PVC Wire Holder (Size 24x24x30") Per Seat .

Providing and placing in position center tables od size 1200x600x450 with 40mm teakwood legs 62.5x35mm teak frame at top with inlay works as detailed including polished and 10mm beveled brown glass on top. The work Shall be completed as per drawing and direction of Engineer-in-charge.

Visitor Chair size (61.4 cm w x 64.5 cm d x 89.5 cm h) Seat size (47 cm w x 48 cm d ), Seat and back are made up of 1.2+ 0.1 cm thick hot pressed plywood and uphold stered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumber support for extra comfort. The HR polyurethane foam is moulded with density = 45+2 kg/m and hardness load 16+2 kgf as per IS 7888 for 25% compression. One piece arm rests are injection moulded from back co-polymer polypropylene. The power powder coated (DFT. 40-60 microns) Tubular frame is cantilever type and made of 254+0.03 cm x 0.2 +0.016 cm thick M.S. ERW tube. The work Shall be completed as per drawing and direction of Engineer-in-charge. Godrej, or equivalent make

High Back revolving Chair ( size 76 cm (w)x76cm(d)x101.5 to 117.5 (h) with sheet hieght 46.5 to 55.5 cm) The seat is made up of 1.2+0.1cm. Thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded polyurethane foam. The back is made up 1.2+0.1 cm thick hot pressed plywood upholstered with replaceable babric or synthetic leather upholstery covers and moulded ployurethane foam. The back ply and foam is designed with contoured lumber support for comfortable seating posture. The HR polyurethane foam for seat and back is moulded with density 45+/-2 kg/cum and hardness load 16+2 kgf as per IS 7888 for 25% compression. The armrest top is made of moulded polyurethane (P.U.) and mounted on to a drop lift height adjustable type M.S. tubular armrest support chrome plated. The armrest height is adjustable upto 6.5+0.5 cm. in 5 steps & also has swivel adjustment of 22 +2 degree on both sides. The chair should have 360 degree revolving type with single point control,sheet back tilting ratio should be 1:2 and seat depth adjustment of 6.0+0.5 cm can be locked in 6 position. The backrest consists of a sliding up down mechanism, which can be adjusted in the range of 7.5+0.5 cm and can be locked in 4 positions. The twin wheel castors are injection moulded in black nylon. The work Shall be completed as per drawing and direction of Engineer-in-charge. Godrej, or equivalent make

MID Back Chair size (76.3 cm w x 76.3 cm d x 85.5 to 97.5 cm h) Mid back size 47.5 cm (w) x 58 cm (h), Seat and back are made up of 1.2+ 0.1 cm thick hot pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumber support for extra comfort. The HR polyurethane foam is moulded with density = 45+2 kg/m and hardness load 16+2 kgf as per IS 7888 for 25% compression. One piece arm rests are injection moulded from back co-polymer polypropylene. Chair should have centre tilt synchro mechanism. The mechanism is designed with the following features. 3600 revolving type upright position locking, tilt tension adjustment seat/back tilting ratio 1:3. The pneumatic height adjustment has an adjustment stroke of 12.0+0.3 cm. The bellow is 03 piece telescopic type and injunction moulded in black polypropylene PEDESTAL ASSEMBLY- The pedestal is injection moulded in black 33% glass filled nylon-66 and fitted with 05 nos. twin wheel castors. The pedestal is 66.3+0.5 cm pitch centre dia (76.3 +1.0 cm with castors). The twin wheel castors are injection moulded in black nylon. The work Shall be completed as per drawing and direction of Engineer-in-charge. Godrej, or equivalent make

Executive Table with ERU and pedestal (size 6'x3') Supply of executive table with ERU and pedestal size 1500x750x740 mm with top and side panel 25 mm thick MDF clad with 0.6 mm thick post formed laminated and 1 mm thick backing laminated. Flat edge duly sealed with 2 mm thick PVC beading. ERU (Extended return unit) left hand side should have size 1050X450X705 mm top and, top and side panel 25 mm thick MDF clad with 0.6 mm thick post formed laminated and 1 mm thick backing laminated. Flat edge duly sealed with 2 mm thick PVC beading, modesty 18 mm thick plain particle board clad with 1 mm thick decorative laminated on both sides edge sealed with 2 mm thick PVC bidding. Pedestal:- three drawer pedestal made of 25 mm thick + 1 mm MDF clad with decorative post formed laminated on top, sides & balancing laminated on bottom side. Post forming edge at the front side. Other panels made of 18 mm thick (+ 1mm) pre laminated particle board, handles – Metal handle are provided on the shutter door at 128 mm CD. Table should have 10 mm thick as molded glass on top with fibre sheet The work Shall be completed as per drawing and direction of Engineer-in-charge. Godrej, or equivalent make

Providing and Fixing of High Density PE Sheet (12'/15' Width) 800 gauge thick Black Color for Antiseepage treatment at basements, including necessing overlapping 6" at joints (including cost of sheet & lobour charges)

Bidder Name

Amount

KK CONSTRUCTION KOTA(GSTN-08AGBPS3734N1ZY)

Anil and Company(GSTN-08AAEFA2103L1ZT)

PAWAN BUILDERS(GSTN-08ABVPG0044L1ZF)

PAWAN BUILDERS

KK CONSTRUCTION KOTA

PAWAN BUILDERS

Anil and Company