Loading
Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹4.0 L
Closing Date
16 Jun 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
NORTH
15 conditions · 3 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022 and ACS No.1 dt 14.07.22: The tenderer must have minimum average annual contractual turnover of 'V/N' Or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Any Civil Engineering Work / Zonal maintenance works.
20 conditions · 9 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person to the official nominated (i.e.OS/Tenders/Engg/GNT Division) before closing date for submission of bids.(i.e., excluding the last date of submission of Bids).
Tender value is including escalation of (-)15% (Minus Fifteen Percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Zone NALLAPADU - Nallapadu colony and station, Railvihar colony, Divisional office campus at Pattabhipuram for the period from 01-07-2026 to 30-06-2027.
494-DRM-W-GNT-Tid-2858
494-DRM-W-GNT-Tid-2858
Open
Works - General
12 Months
Guntur, Andhra Pradesh
₹0
₹4.0 L
16 Jun 2026
22 May 2026
2 Jun 2026
91 items across 1 schedule · ₹9,93,956.52 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | NS-GNT-DSR-27-Supply of GI Gate valve Zoloto- 50 mm | Each | 5.00 | 4,682.78 | 23,413.9 |
| 2 | NS-GNT-DSR-112-Supply of CPVC pipe 50 mm | Foot | 50.00 | 147.17 | 7,358.5 |
| 3 | NS-GNT-DSR-113-Supply of CPVC pipe 40 mm | Foot | 500.00 | 104.35 | 52,175 |
| 4 | NS-GNT-DSR-114-Supply of CPVC pipe 32 mm | Foot | 500.00 | 89.64 | 44,820 |
| 5 | NS-GNT-DSR-115-Supply of CPVC pipe 25 mm | Foot | 300.00 | 46.82 | 14,046 |
| 6 | NS-GNT-DSR-116-Supply of CPVC pipe 20 mm | Foot | 100.00 | 29.43 | 2,943 |
| 7 | NS-GNT-DSR-117-Supply CPVC 50 mm Coupling | Each | 20.00 | 173.93 | 3,478.6 |
| 8 | NS-GNT-DSR-118-Supply of CPVC 50 mm 'T' bend | Each | 10.00 | 294.35 | 2,943.5 |
| 9 | NS-GNT-DSR-119-Supply of CPVC 50 mm 'L' bend | Each | 6.00 | 240.83 | 1,444.98 |
| 10 | NS-GNT-DSR-123-Supply of CPVC 50 mm MABT (Male Adopter Brass thread) | Each | 6.00 | 1,003.45 | 6,020.7 |
| 11 | NS-GNT-DSR-124-Supply of CPVC 50 mm FABT (Female Adopter Brass thread) | Each | 6.00 | 976.69 | 5,860.14 |
| 12 | NS-GNT-DSR-125-Supply of CPVC 50 mm Union | Each | 6.00 | 401.38 | 2,408.28 |
| 13 | NS-GNT-DSR-128-Supply of CPVC 50 mm ball valve | Each | 6.00 | 1,204.14 | 7,224.84 |
| 14 | NS-GNT-DSR-130-Supply CPVC 50 mm convertor 50x50 | Each | 6.00 | 334.48 | 2,006.88 |
| 15 | NS-GNT-DSR-132-Supply CPVC 32 mm Coupling | Each | 6.00 | 93.66 | 561.96 |
| 16 | NS-GNT-DSR-133-Supply of CPVC 32 mm 'T' bend | Each | 6.00 | 147.17 | 883.02 |
| 17 | NS-GNT-DSR-134-Supply of CPVC 32 mm 'L' bend | Each | 6.00 | 131.12 | 786.72 |
| 18 | NS-GNT-DSR-135-Supply of CPVC 32 mm 45 bend (Half shoe) | Each | 6.00 | 127.1 | 762.6 |
| 19 | NS-GNT-DSR-136-Supply of CPVC 32 mm MAPT(Male Adopter plastic thread) | Each | 6.00 | 160.55 | 963.3 |
| 20 | NS-GNT-DSR-137-Supply of CPVC 32 mm FAPT (Female Adopter plastic thread) | Each | 6.00 | 160.55 | 963.3 |
| 21 | NS-GNT-DSR-138-Supply of CPVC 32 mm MABT (Male Adopter Brass thread) | Each | 6.00 | 602.07 | 3,612.42 |
| 22 | NS-GNT-DSR-139-Supply of CPVC 32 mm FABT (Female Adopter Brass thread) | Each | 6.00 | 575.31 | 3,451.86 |
| 23 | NS-GNT-DSR-140-Supply of CPVC 32 mm Union | Each | 6.00 | 160.55 | 963.3 |
| 24 | NS-GNT-DSR-141-Supply of CPVC 32 mm Reducer 32x25 mm | Each | 6.00 | 107.03 | 642.18 |
| 25 | NS-GNT-DSR-143-Supply of CPVC 32 mm ball valve | Each | 6.00 | 602.07 | 3,612.42 |
| 26 | NS-GNT-DSR-146-Supply CPVC 25 mm Coupling | Each | 50.00 | 78.94 | 3,947 |
| 27 | NS-GNT-DSR-147-Supply of CPVC 25 mm 'T' bend | Each | 24.00 | 93.66 | 2,247.84 |
| 28 | NS-GNT-DSR-148-Supply of CPVC 25x15 BT 'T' bend (brass tread) | Each | 6.00 | 147.17 | 883.02 |
| 29 | NS-GNT-DSR-149-Supply CPVC 25x15 BT reducer (Brass thread) | Each | 6.00 | 140.48 | 842.88 |
| 30 | NS-GNT-DSR-150-Supply of CPVC 25 mm 25x15 BT 'L' bend (Brass thread) | Each | 6.00 | 153.86 | 923.16 |
| 31 | NS-GNT-DSR-151-Supply of CPVC 32 mm 'L' bend | Each | 24.00 | 86.97 | 2,087.28 |
| 32 | NS-GNT-DSR-157-Supply of CPVC 25 mm Union | Each | 12.00 | 133.79 | 1,605.48 |
| 33 | NS-GNT-DSR-160-Supply of CPVC 25 mm ball valve | Each | 6.00 | 307.73 | 1,846.38 |
| 34 | NS-GNT-DSR-161-Supply of CPVC 25 mm Tank nipples | Each | 5.00 | 200.69 | 1,003.45 |
| 35 | NS-GNT-DSR-162-Supply of convertor 25X25 mm UPVC - CPVC | Each | 6.00 | 133.79 | 802.74 |
| 36 | NS-GNT-DSR-164-Supply CPVC 20 mm Coupling | Each | 12.00 | 24.08 | 288.96 |
| 37 | NS-GNT-DSR-165-Supply of CPVC 20 mm 'T' bend | Each | 12.00 | 29.43 | 353.16 |
| 38 | NS-GNT-DSR-166-Supply of CPVC 20x15 BT 'T' bend (brass tread) | Each | 6.00 | 107.03 | 642.18 |
| 39 | NS-GNT-DSR-167-Supply CPVC 20x15 BT reducer (Brass thread) | Each | 6.00 | 93.66 | 561.96 |
| 40 | NS-GNT-DSR-168-Supply of CPVC 20 mm L bow | Each | 12.00 | 26.76 | 321.12 |
| 41 | NS-GNT-DSR-169-Supply of CPVC 20x15 BT 'L' bend (Brass tread) | Each | 6.00 | 100.35 | 602.1 |
| 42 | NS-GNT-DSR-175-Supply of CPVC 20 mm ball valve | Each | 5.00 | 240.83 | 1,204.15 |
| 43 | NS-GNT-DSR-177-Supply of CPVC solvent cement (Gum) 59 ml | Each | 50.00 | 147.17 | 7,358.5 |
| 44 | NS-GNT-DSR-180-Supply of Teflan tape | Each | 50.00 | 33.45 | 1,672.5 |
| 45 | NS-GNT-DSR-181-Supply of CPVC 40 mm L-bend | Each | 6.00 | 167.24 | 1,003.44 |
| 46 | NS-GNT-DSR-182-Supply of CPVC 40 mm T-bend | Each | 6.00 | 180.62 | 1,083.72 |
| 47 | NS-GNT-DSR-183-Supply CPVC 40 mm Coupling | Each | 6.00 | 120.41 | 722.46 |
| 48 | NS-GNT-DSR-204-Supply of C.P. Brass bib-cock 15 mm dia (Jaquar) | Each | 20.00 | 1,605.52 | 32,110.4 |
| 49 | NS-GNT-DSR-206-Supply of C.P.Brass Angle valve 15 mm dia | Each | 20.00 | 735.87 | 14,717.4 |
| 50 | NS-GNT-DSR-207-Supply of C.P. Brass Long body bib-cock 15 mm dia | Each | 20.00 | 1,806.21 | 36,124.2 |
| 51 | NS-GNT-DSR-208-Supply of CP brass pillar cock | Each | 20.00 | 1,806.21 | 36,124.2 |
| 52 | NS-GNT-DSR-209-Supply of C.P. Brass Two-way bib-cock 15 mm dia | Each | 20.00 | 2,408.29 | 48,165.8 |
| 53 | NS-GNT-DSR-210-Supply of C.P. Brass Two-way Angle valve 15 mm dia | Each | 10.00 | 2,140.7 | 21,407 |
| 54 | NS-GNT-DSR-213-Supply of Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia | Each | 5.00 | 936.56 | 4,682.8 |
| 55 | NS-GNT-DSR-214-Supply of C.P. brass toilet paper holder of standard size | Each | 15.00 | 1,070.35 | 16,055.25 |
| 56 | NS-GNT-DSR-215-Supply of C.P.Brass Health Facuent including gun, pipe and brackets | Each | 40.00 | 1,471.73 | 58,869.2 |
| 57 | NS-GNT-DSR-217-Supply of CP brass Towel Rail ( 7 5 0 m m ) (With brackets and fixing arrangements) | Each | 10.00 | 2,006.9 | 20,069 |
| 58 | NS-GNT-DSR-218-Supply of CP brass Towel Rail ( 6 0 0 m m ) (With brackets and fixing arrangements) | Each | 10.00 | 1,605.52 | 16,055.2 |
| 59 | NS-GNT-DSR-222-Supply of Mirror of superior make glass 60x45 cm (With 5-6mm thick base complete) | Each | 5.00 | 1,070.35 | 5,351.75 |
| 60 | NS-GNT-DSR-223-Supply of PTMT bib-cock 15 mm dia (prayag) | Each | 10.00 | 401.38 | 4,013.8 |
| 61 | NS-GNT-DSR-224-Supply of PTMT Push cock 15 mm dia | Each | 30.00 | 267.59 | 8,027.7 |
| 62 | NS-GNT-DSR-226-Supply of PTMT pillar cock 15 mm dia | Each | 5.00 | 468.28 | 2,341.4 |
| 63 | NS-GNT-DSR-227-Supply of PTMT Long body bib- cock 15 mm dia | Each | 5.00 | 495.04 | 2,475.2 |
| 64 | NS-GNT-DSR-228-Supply of PTMT Two-way bib- cock 15 mm dia | Each | 5.00 | 508.42 | 2,542.1 |
| 65 | NS-GNT-DSR-229-Supply of PTMT Two-way Angle valve 15 mm dia | Each | 5.00 | 508.42 | 2,542.1 |
| 66 | NS-GNT-DSR-230-Supply of PTMT Health Facuent including gun,pipe and brackets | Each | 5.00 | 602.07 | 3,010.35 |
| 67 | NS-GNT-DSR-235-Supply of PTMT Nylon connection 600 mm lenth 15 mm | Each | 20.00 | 133.79 | 2,675.8 |
| 68 | NS-GNT-DSR-241-Supply of Flushing cistren 10 litres low level cistern with fittings standard make | Each | 15.00 | 1,672.42 | 25,086.3 |
| 69 | NS-GNT-DSR-248- P.V.C. connection pipe with brass union 45 cm long 15 mm bore (Nylon connection) | Each | 10.00 | 173.93 | 1,739.3 |
| 70 | NS-GNT-DSR-255-Supply Ordinary Portland Cement-53 grade | per 50 kg of cement | 50.00 | 481.66 | 24,083 |
| 71 | NS-GNT-DSR-260-Supply of white cement | Tonne | 0.05 | 14,984.9 | 749.25 |
| 72 | NS-GNT-DSR-262-Hiring of JCB with all contractors men, consumables and machinery | Hour | 160.00 | 1,337.94 | 2,14,070.4 |
| 73 | NS-GNT-DSR-16-Supply Coarse Sand at specified locations | cum | 6.00 | 1,662.62 | 9,975.72 |
| 74 | NS-GNT-DSR-75-Supply of Hydraulic door closer ISI marked (IS:3564-1996) | Each | 60.00 | 2,241.05 | 1,34,463 |
| 75 | NS- GNT-DSR-77-Supply of Brass butt hinges (light/ordinary type) : 100x70x4 mm | Each | 12.00 | 294.35 | 3,532.2 |
| 76 | NS- GNT-DSR-78-Supply of Brass butt hinges (light/ordinary type):75x40x2.5 mm | Each | 24.00 | 90.31 | 2,167.44 |
| 77 | NS-GNT-DSR-79-Supply of Brass tower bolt (barrel type) 200x10 mm | Each | 6.00 | 668.97 | 4,013.82 |
| 78 | NS-GNT-DSR-80-Supply of Brass handles75 mm with plate 125x32 mm | Each | 12.00 | 180.62 | 2,167.44 |
| 79 | NS-GNT-DSR-81-Supply of Oxidised mild steel sliding door bolt 300x16 mm | Each | 12.00 | 100.35 | 1,204.2 |
| 80 | NS-GNT-DSR-82-Supply of Oxidised mild steel sliding door bolt 250x16 mm | Each | 12.00 | 93.66 | 1,123.92 |
| 81 | NS-GNT-DSR-83-Supply of Oxidised mild steel tower bolt (barrel type) 200x10 mm | Each | 12.00 | 66.9 | 802.8 |
| 82 | NS-GNT-DSR-84-Supply of Oxidised mild steel tower bolt (barrel type) 150x10 mm | Each | 12.00 | 60.21 | 722.52 |
| 83 | NS-GNT-DSR-85-Supply of Oxidised mild steel handles 125 mm | Each | 12.00 | 20.07 | 240.84 |
| 84 | NS-GNT-DSR-86-Supply of Oxidised mild steel handles 100 mm | Each | 12.00 | 13.38 | 160.56 |
| 85 | NS-GNT-DSR-87-Supply of Anodised Aluminium sliding door bolt 250x16 mm | Each | 12.00 | 113.72 | 1,364.64 |
| 86 | NS-GNT-DSR-88-Supply of Anodised Aluminium tower bolt (barrel type) 150x10 mm. | Each | 12.00 | 93.66 | 1,123.92 |
| 87 | NS-GNT-DSR-89-Supply of Anodised Aluminium tower bolt (barrel type) 100x10 mm. | Each | 12.00 | 46.83 | 561.96 |
| 88 | NS-GNT-DSR-90-Supply of Anodised Aluminium handles 75mm with plate 125 x 32 mm | Each | 12.00 | 29.43 | 353.16 |
| 89 | NS-GNT-DSR-94-Supply of Nails 25-100mm long | Kg | 5.00 | 113.72 | 568.6 |
| 90 | NS-GNT-DSR-95-Supply of Nails up to 25mm long | Kg | 5.00 | 113.72 | 568.6 |
| 91 | NS-GNT-DSR-96-Supply of Bright finished or black enamelled mild steel screws 40 mm | 100 Nos. | 500.00 | 80.28 | 401.4 |
| Schedule total | ₹9,93,956.52 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Master Tender Document
ATTACHMENT
GCC 2022 with all ACSs
ATTACHMENT
DivyangjanGazette.pdf
ATTACHMENT
LabTesting.pdf
ATTACHMENT
OnsiteLabTestingofMaterialsguidelines.pdf
ATTACHMENT
RevisedApprovedlistofBrandsandMakes2026.pdf approved list of brands
ATTACHMENT
System improvements
ATTACHMENT
SpecialConditionsofzones2026_1.pdf
ATTACHMENT
RevisedApprovedlistofBrandsandMakes2026.pdf
ATTACHMENT
SystemImprovementsformaintainingSiteRecords-CE-WorksLr.pdf
ATTACHMENT
ZonalMasterTenderDocument2025-WithACS-11.pdf
ATTACHMENT
GCC_April-2022_2022ACS1to11-Merged-compressed1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .