Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.5 LAccepted-AOC | ₹8.5 L | 1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | WILSON.R L1 |
|---|---|---|---|---|
| 1.00Road Retarring | ||||
| 1.00 | OD57873/2025-2026:Filling up of pot holes (Cut and formed to regular shapes and all loose and defective materials removed)after supplying a prime coat of hot bitumen using 36mm broken stone and compacting with power roller to get a compact surface | 3.33 | cum | 8,306.25 ₹27,651.51 Lowest |
| 1.00 | 75.5.2.2pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 678 | sqm | 18.9 ₹12,814.2 Lowest |
| 1.00 | 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65) | 678 | sqm | 302.65 ₹2,05,196.7 Lowest |
| 1.00 | OD215469/2025-2026:Supplying and providing readymade GI nameboard with all conveyance labour and hire charges etc complete using GI hollow tube of size 80*40*1.4mm post outer frame .6mm thick sheet of size 90*60 cm with two coat of enamel painting over a coat of primer lettering with suitable colour and size fixing the post in ground with CC 1;2:4 etc complete | 1 | 1 nos | 2,804.26 ₹2,804.26 Lowest |
| 2.00Berm Concrete | ||||
| 2.00 | 3.5.2:Excavation in Soil with Dozer with lead upto 100 m <br> Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. | 46.3 | cum | 66.84 ₹3,094.69 Lowest |
| 2.00 | 4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material | 18.32 | cum | 3,337.88 ₹61,149.96 Lowest |
| 2.00 | 75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification
(i) Nominal mix (1:2:4) | 27.48 | cum | 9,563.75 ₹2,62,811.85 Lowest |
| 3.00Drainage | ||||
Tender Value
₹8.5 L
EMD Value
₹21,186
Closing Date
28 Feb 2026, 4:00 pmClosed
ASSISTANT EXECUTIVE ENGINEER
ASSISTANT EXECUTIVE ENGINEER OFFICE DIST PANCHAYAT PALAKKAD
Annual Plan-DP 2025-26 Construction of Aarampadam Kunnamani road retarring in Pattenchery GP
2026_LSGD_838427_6
12/AEE/2025-26 DT-11/02/26
Open Tender
Civil Works - Roads
Item Rate
180 days
DISTRICT PANCHAYATH PALAKKAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,870
Yes
₹21,186
Yes
6 Aug 2026
20 Feb 2026
2 Mar 2026
20 Feb 2026
28 Feb 2026
20 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Road Retarring | |||||
| 1.001 | OD57873/2025-2026:Filling up of pot holes (Cut and formed to regular shapes and all loose and defective materials removed)after supplying a prime coat of hot bitumen using 36mm broken stone and compacting with power roller to get a compact surface | - | cum | - | - |
| 1.002 | 75.5.2.2pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | - | sqm | - | - |
| 1.003 | 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65) | - | sqm | - | - |
| 1.004 | OD215469/2025-2026:Supplying and providing readymade GI nameboard with all conveyance labour and hire charges etc complete using GI hollow tube of size 80*40*1.4mm post outer frame .6mm thick sheet of size 90*60 cm with two coat of enamel painting over a coat of primer lettering with suitable colour and size fixing the post in ground with CC 1;2:4 etc complete | - | 1 nos | - | - |
| 2Berm Concrete | |||||
| 2.001 | 3.5.2:Excavation in Soil with Dozer with lead upto 100 m <br> Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. | 1 | cum | - | - |
| 2.002 | 4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material | - | cum | - | - |
| 2.003 | 75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification
(i) Nominal mix (1:2:4) | - | cum | - | - |
| 3Drainage | |||||
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1412600.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
Tendernotice_2.pdf
PDF • 0.04 MB
Tendernotice_3.pdf
PDF • 0.14 MB
Tendernotice_4.pdf
PDF • 0.06 MB
Tendernotice_5.pdf
PDF • 0.07 MB
Tendernotice_6.pdf
PDF • 1.78 MB
viewnit.pdf
Tender Documents • 0.03 MB
BOQ_1412600.xls
BOQ • 0.31 MB
viewsbd.pdf
Tender Documents • 2.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .