REPAIR AND MAINT OF STREET LIGHTS SECURITY LIGHTS IN ZONE-A AT DEFENCE LAB JODHPUR

Amount

Disconnecting and taking down old unserviceable LED street light fittings with brackets fixed on HT/LT/Street light poles, repairing after cleaning and replacing the un-serviceable parts and refixing / reconnecting after replacing wires / jumpers as required for proper functioning of street light fittings complete all as specified and directed by engineer-in-charge. Note : -(i) Parts replaced shall be measured and paid for as "Supply only" here-in-after. (ii) Cost of replacement of wornout wire of the fittings and connections as per existing size of conductor of the each fittings shall deemed to be included in the rate quoted of this item.

Supply,Connecting and testing of energy efficient, pressure die cast housing with heat resistant toughened glass and individual high power LEDs with secondary optics and IP-66 protection of street light luminaries 72 watt , impact resistance, fixed on pole(Crompton Cat Part No: LSTP-72-CDL-M or equivalent approved by Engr-in-charge) including taking down unserviceable light fitting complete all as specified and directed by Engineer-in-charge. Make:-Crompton/Bajaj/Havells/Wipro.

Supply,Connecting and testing of energy efficient, pressure die cast housing with heat resistant toughened glass and individual high power LEDs with secondary optics and IP-66 protection of street light luminaries 120 watt , impact resistance, fixed on pole (Crompton Cat Part No: LSTP-120-CDL-M or equivalent approved by Engr-in-charge) including taking down unserviceable light fitting complete all as specified and directed by Engineer-in-charge. Make:-Crompton/Bajaj/Havells/Wipro

Supply,Connecting and testing of energy efficient, pressure die cast housing with heat resistant toughened glass and individual high power LEDs with secondary optics and IP-66 protection of street light luminaries 180 watt , impact resistance, fixed on pole (Crompton Cat Part No: LSTN1-180-CDL-A-M or equivalent approved by Engr-in-charge) including taking down unserviceable light fitting complete all as specified and directed by Engineer-in-charge. Make:-Crompton/Bajaj/Havells/Wipro

Supply only Driver for LED 60/72 Watt omplete all as specified and directed by Engineer-in-charge. Make :- Bajaj / Havells / CG/Wipro

Supply only Driver for LED 90/120 Watt omplete all as specified and directed by Engineer-in-charge. Make :- Bajaj / Havells / CG /Wipro

Supply only Driver for LED 200/400 Watt omplete all as specified and directed by Engineer-in-charge. Make :- Bajaj / Havells / CG /Wipro

Supply only Surge Arrester for LED 25 to 75 Watt omplete all as specified and directed by Engineer-in-charge. Make :- Bajaj / Havells / CG/Wipro

Supply only Surge Arrester for LED 75 to 150 Watt omplete all as specified and directed by Engineer-in-charge. Make :- Bajaj / Havells / CG/Wipro

Supply only Surge Arrestor for LED 200/400 Watt omplete all as specified and directed by Engineer-in-charge. Make :- Bajaj / Havells / CG/Wipro

S&F in replacement LED bulb of 9 watt, 6500K complete all as specified and directed by Engineer-in-charge.

Supply, laying, jointing and testing 1.50 sqmm PVC insulated,unsheathed,multi-stranded,three core,FRLS copper conductor cable for connection of security light to DB or over head conductor including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-charge.

S&F MCB SP ‘C’ curve, 10KA 6 to32 amps including necessary connection including taking down existing unserviceable MCB from DB complete all as specified and directed by Engineer in charge.

S&F in replacement MCCB 4 pole 100 Amps, 25 KA 415 Volts including necessary connection including taking down existing unserviceable MCCB complete all as specified and directed by Engineer in charge.

S&F in repair rigid non metalic PVC conduit (ISI Mark) of external dia 25mm with fixing accessories such as couplers,saddles,nuts,clamps etc all as required at site, complete all as specified and as directed by Engineer-in-charge. Note :- The cost of Clamps, nut bolts etc shall be included in the rate quoted.

S&F in repair street light brackets made out of 40mm dia light grade GI tubing, bent to shape length not less than 1.20 metre fixed with suitable size of clamps, nuts, bolts etc all as required at site, complete all as specified and directed by Engineer-in-charge. Note :- The cost of Clamps, nut bolts etc shall be included in the rate quoted.

S&F in repair hot press moulded SMC junction cable jointing box 200x140x95 mm dimension,off white color with SMC base and SMC door,door fixed with hinge on left side ,door fixed with mechanical fasteners inlcuding connection to the exiting cable omplete all as specified and directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5 mtr in deep for foundation of pole,laying of cable etc, and getting out in any type of soil including stone putti etc complete all as specified and directed by Engineer-in-charge.

Taking out existing LT under ground cable 1100 volts grade PVC insulated PVC Sheathed armoured aluminium conductor of any size from trenches / ducts / pipe, on wall, poles and removing unserviceable cable/conductor from the site complete all as specified and directed by Engineer-in-charge.

Supply, laying, jointing and testing including passing through pipes or fixed to wall/pole or laid in trenches of 4 core 16 Sqmm LT under ground cable 1100 volts grade PVC insulated PVC Sheathed armoured aluminium conductor including connection, testing complete all as specified and directed by Engineer-in-charge.

Cutting/ chassing or Boring as required in hard standing/PCC / Road exceeding 10 Cm girth for concealed to GI tubing and making good to disturbed surface with cement mortar 1:3 to match with existing surfaces including facing/finishing where complete all as specified and directed by Engineer-in-charge.

M& L Supply and spreading clean dry sand(tibba sand) in trenches for cushioning to UG LT cable and punning to provide required cover to UG cable complete all as specified and directed by Engineer-in-charge. Note :- Punned thickness shall be measured for the purpose of payment.

Supply and laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti cable cover 25cm to 30cm wide and not less than 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified and directed by Engineer-in-charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and directed by Engineer-in-charge.

Removing excavated materials to a distance not exceeding 50m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-charge.

S&F in replacement Automatic astronomical functional timer switch single phase 40 Amp rating with inbuilt contractor in enclosure suitable for existing arrangement complete all as specified and directed by Engineer-in-charge.

M&L for Tightening jumpers and removing carbon from existing connection of street light at contact by scrubbing carbon and making good by new connection with suitable size of cable and testing complete all as specified and directed by Engineer-in-charge. Note:-Trimming of tree branches, girth n. exc 30 cm up to two meter distance from line conductor/ span of street light pole complete in all respect including cleaning the ground.

S&F in repair 32 mm bore light grade GI pipe for protection of cable from connection to junction box including clamps etc complete all as specified and directed by Engineer-in-charge.

M& L for Cement concrete 1:3:6 type C-1 by using 20mm graded crushed stone aggregate as in pedestal of pole including necessary form work complete all as specified and directed by Engineer-in-charge.

Disconnecting and taking down old unserviceable LED flood light fittings/aviation obstruction light with brackets fixed on 15 mtr High Mast light pole,repairing after cleaning and replacing the un-serviceable parts and refixing / reconnecting after replacing wires / jumpers as required for proper functioning of light fittings complete all as specified and directed by engineer-in-charge. Note : -(i) Parts replaced shall be measured and paid for as "Supply only" here-in-after. (ii) Cost of replacement of wornout wire of the fittings and connections as per existing size of conductor of the each fittings shall deemed to be included in the rate quoted of this item.

Supply only LED flood light made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. System efficacy ³ 110LPW. Option for 3000K. 10KV SPD luminaries type of 200 watt LED (Crompton Cat Part No: LFLN-200-CDL/60-M or equivalent approved by Engr-in-charge ) Make: Havells/CG/Bajaj/wipro

Supply only Aviation obstruction light LED 6 watt 230 V red color,aluminium poly carbonate body complete all as specified and directed by Engineer-in-charge. Make: Kalin or equivalent

Supply and Fixing, connecting and testing of 3 pole power contactor 100 A including taking down unserviceable contactor complete all as specified and directed by Engineer-in-charge.

Supply, fix in repairs ,connecting and testing of Time switch ,single phase,MicroRex OT11(24 hrs),250 V AC,50 Hz including taking down unserviceable time switch complete all as specified and directed by Engineer-in-charge.

Supply and fixing of top Post lantern fitting of 40 watt LED, Casting LED post top made in cast aluminium spigot house up with decorative opal acrylic diffuser and IP 65 protection of 40 watt LED (Crompton Cat Part No: LPTO-40-CDL or equivalent approved by Engr-in-charge) including taking down the old U/S top post lantern fitting/gate light.Make Bajaj/CG/Havell/philips/Wipro.

Panwar Electricals

SANJOLI CONSTRUCTION COMPANY

vinayandsons

M/s Bakiyalakshmi Enterprises

GAYATRI ENTERPRISES

VARDHMAN SALES CORPORATION

Anil Builders