Aryad BP_Completion works of Dining Hall in Block office-

Amount

Completion works

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

OD75239/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.

OD75240/2024-2025:Providing and fixing aluminium trafford sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.45 mm (+0.05%), total coated 240mpa stel grade,5-7 microns epoxy primer on both side of the sheet and thickness with zinc coating 120 gramsper sqm as perIS 277,in polyster top coat15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid sratches during transportation and should be supplied in single legth upto 12 meters or as desired by engineer in charge.the sheet shall be fixed using self drilling /self tapping screws with EPDM seal,complete up to any pitch in horizontal/vertical or curved surface, excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required

OD77793/2024-2025:Supplying and fixing PVC door of good quality.

OD77794/2024-2025:Providing and fixing wall mounted SS wash basin including all cost and conveyance etc complete.

OD100103/2024-2025:Supplying and fixing 0.50Hp motor

OD104718/2024-2025:Carpenter for repairing damaged doors and windows

OD104719/2024-2025:Engaging laborers for removing scraps and cleaning the compund

51.19.ST2:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately)<br> 2. 15 to below 25 flush capacity

Jithend.KR

Bidder Name

SASI K K

Jithend.KR