R&R

Earth work excavation for foundations manual means and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building foundations

Earth work excavation for foundations manual means and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, , labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building Foundation (curtain walls/ narrow foundations)

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Filling the Basement with the carting earth with initial lead of 1000mts from site including filling watering and ramming including cost and conveyance of water to work site and all operational, incidental labour charges hire charges etc, complete for finihshed item of work.

Plain Cement Concrete (1:4:8) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, mixing concrete in concrete mixer, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402) for Levelling Course and Flooring Bed

Plain Cement Concrete (1:5:10) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including and, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402) for Levelling Course and Flooring Bed

Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using Granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including and, sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation and basement (APSS No. 601 & 615)

Plain Cement Concrete M15 grade nominal mix (1:2.5:5) proportion (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Broken Granite (IS383, 1970) Machine Crushed graded metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including , sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for Septic Tank (APSS No. 402)

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Footings.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Pedastals.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for PLINTH BEAM

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Columns GROUND FLOOR

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Lintels GROUND FLOOR

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Lintels 1st FLOOR

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Sunshades / Chajjas for 75mm thick at Fixed end and 50mm thick at Free end and for a width of 0.60 Mts. etc complete for finished item of work SUNSHADES GROUND FLOOR

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Sunshades / Chajjas for 75mm thick at Fixed end and 50mm thick at Free end and for a width of 0.60 Mts. etc complete for finished item of work SUNSHADES FIRST FLOOR

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Beams GROUND FLOOR

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Beams FIRST FLOOR

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for slab of 100mm thick GROUND FLOOR

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for slab of 100mm thick FIRST FLOOR

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab of 115mm thick GROUND FLOOR

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab of 115mm thick GROUND FLOOR

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab of 125mm thick GROUND FLOOR

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab of 125mm thick FIRST FLOOR

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for slab of 140mm thick GROUND FLOOR

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for slab of 140mm thick FIRST FLOOR

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for slab of 175mm thick GROUND FLOOR

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for slab of 175mm thick FIRST FLOOR

ࠁ牂捩慍潳牮⁹湩猠灵牥瑳畲瑣牵⁥楷桴䌠⁍ㄨ㘺 牰灯眠瑩⁨汆慹桳䌠浥湥⁴潳楬⁤汢捯獫漠⁦楳敺㈠〹砠㈠㔲砠ㄠ〴洠Ɑ映牯洠湡晵捡畴楲杮漠⁦汦慹桳猠汯摩戠潬正⁳獵湩⁧汦慹桳漠⁦〸欠獧‬散敭瑮漠⁦㔱欠獧‮祇獰浵漠⁦‵杫⹳愠摮猠潴敮搠獵⁴楷桴愠挠浯牰獥癩⁥瑳敲杮桴渠瑯氠獥瑳慨〵欠⽧煳湩汣摵湩⁧潣瑳愠摮挠湯敶慹据⁥景愠汬洠瑡牥慩獬‬慬潢牵挠慨杲獥‬敳湩潩慲敧挠慨杲獥‬捳晡潦摬湩⁧湡⁤畣楲杮攠捴Ⱞ†潦⁲慂敳敭瑮 椀洀栀蘀椁ᔀ汆⁹獡⁨牂捩慍潳牮ॹ〵‱…〵갴ࠁ牂捩慍潳牮⁹湩猠灵牥瑳畲瑣牵⁥楷桴䌠⁍ㄨ㘺 牰灯眠瑩⁨汆慹桳䌠浥湥⁴潳楬⁤汢捯獫漠⁦楳敺㈠〹砠㈠㔲砠ㄠ〴洠Ɑ映牯洠湡晵捡畴楲杮漠⁦汦慹桳猠汯摩戠潬正⁳獵湩⁧汦慹桳漠⁦〸欠獧‬散敭瑮漠⁦㔱欠獧‮祇獰浵漠⁦‵杫⹳愠摮猠潴敮搠獵⁴楷桴愠挠浯牰獥癩⁥瑳敲杮桴渠瑯氠獥瑳慨〵欠⽧煳湩汣摵湩⁧潣瑳愠摮挠湯敶慹据⁥景愠汬洠瑡牥慩獬‬慬潢牵挠慨杲獥‬敳湩潩慲敧挠慨杲獥‬捳晡潦摬湩⁧湡⁤畣楲杮攠捴Ⱞ†潦⁲畳数獲牴捵畴敲圠污獬‮片畯摮映潬牯imhƊiƫ̈䈀楲正䴠獡湯祲椠畳数獲牴捵畴敲眠瑩⁨䵃⠠㨱⤶瀠潲⁰楷桴䘠祬獡⁨敃敭瑮猠汯摩戠潬正⁳景猠穩⁥㤲‰⁸㈲‵⁸㐱‰浭‬潦⁲慭畮慦瑣牵湩⁧景映祬獡⁨潳楬⁤汢捯獫甠楳杮映祬獡⁨景㠠‰杫ⱳ挠浥湥⁴景ㄠ‵杫⹳䜠灹畳景㔠欠獧‮湡⁤瑳湯⁥畤瑳眠瑩⁨⁡潣灭敲楳敶猠牴湥瑧⁨潮⁴敬獳桴湡㔠‰杫猯浱椠据畬楤杮挠獯⁴湡⁤潣癮祥湡散漠⁦污慭整楲污ⱳ氠扡畯⁲档牡敧ⱳ猠楥楮牯条⁥档牡敧ⱳ猠慣晦汯楤杮愠摮挠牵湩⁧瑥⹣‬映牯猠灵牥瑳畲瑣牵⁥慗汬⹳䘠物瑳映潬牯imhƆiȄ̈䈀楲正䴠獡湯祲椠畳数獲牴捵畴敲眠瑩⁨䵃⠠㨱⤸瀠潲㩰甠楳杮猠捥湯⁤汣獡⁳牢捩獫漠⁦楳敺㈠″⁸ㄱ砠㜠䌠獭映潲灡牰癯摥猠畯捲⁥慨楶杮洠湩浩浵

瑳牥湩⁧潴攠敶畳晲捡獥漠⁦慷汬眠瑩⁨䵃ㄨ㐺 牐灯›㈱浭琠楨正椠楳杮敬挠慯⁴椠据畬楤杮挠獯⁴湡⁤潣癮祥湡散漠⁦污慭整楲污⁳楬敫挠浥湥ⱴ猠湡Ɽ眠瑡牥攠捴Ⱞ琠楳整‬湩汣摵湩⁧湡Ɽ猠污獥☠漠桴牥琠硡獥漠污慭整楲污ⱳ愠汬漠数慲楴湯污‬湩楣敤瑮污挠慨杲獥愠摮氠扡畯⁲档牡敧⁳畳档愠⁳業楸杮洠牯慴Ⱳ映湩獩楨杮‬畣楲杮‬瑥⹣‬潣灭敬整映牯映湩獩敨⁤瑩浥漠⁦潷歲‮䄨卐⁓〹ⰱ〹⤶䘠物瑳䘠佌剏ɖ倀慬瑳牥湩⁧〲浭琠楨正椠睴潣瑡⁳楷桴戠獡⁥潣瑡漠⁦㘱浭琠楨正椠䵃⠠㨱⤶愠摮琠灯挠慯⁴景㐠浭琠楨正椠䵃⠠㨱⤴搠扵牡⁡灳湯敧映湩獩⁨湩汣摵湩⁧潣瑳愠摮挠湯敶慹据⁥景愠汬洠瑡牥慩獬氠歩⁥散敭瑮‬捳敲湥摥猠湡Ɽ眠瑡牥攠捴Ⱞ琠楳整‬愠摮‬慳敬⁳…瑯敨⁲慴數⁳湯愠汬洠瑡牥慩獬‬污灯牥瑡潩慮ⱬ椠据摩湥慴湡⁤氠扡畯⁲档牡敧⁳畳档愠⁳業楸杮洠牯慴Ⱳ捳晡潦摬湩⁧档牡敧ⱳ氠晩⁴档牡敧ⱳ映湩獩楨杮椬据畬楤杮挠瑵楴杮漠⁦片潯敶⁳桷牥癥牥渠捥獥慳祲愠⁳楤敲瑣摥戠⁹湅楧敮牥ⴠ椠‭档牡敧‬挠牵湩Ⱨ†瑥⹣‬映牯†湕癥湥匠牵慦散⁳景䈠楲正圠污潣灭敬整映牯映湩獩敨⁤瑩浥漠⁦潷歲‮䄨卐⁓〹ⰱ〹″…〹⤴䜠佒乕⁄䱆住卒汐獡整楲杮㈠洰桴捩湩琠潷挠慯獴眠瑩⁨慢敳挠慯⁴景ㄠ洶桴捩湩䌠⁍ㄨ㘺 湡⁤潴⁰潣瑡漠⁦洴桴捩湩䌠⁍ㄨ㐺 畤慢慲猠潰杮⁥楦楮桳椠据畬楤杮挠獯⁴湡⁤潣癮祥湡散漠⁦污慭整楲污⁳楬敫挠浥湥ⱴ猠牣敥敮⁤慳摮‬慷整⁲瑥⹣‬潴猠瑩ⱥ†湡Ɽ猠污獥☠漠桴牥琠硡獥漠污慭整楲污ⱳ愠汬漠数慲楴湯污‬湩楣敤瑮污愠摮†慬潢牵挠慨杲獥猠捵⁨獡洠硩湩⁧潭瑲牡猬慣晦汯楤杮挠慨杲獥‬楬瑦挠慨杲獥‬楦楮桳湩Ⱨ湩汣摵湩⁧畣瑴湩⁧景䜠潲癯獥眠敨敲敶⁲敮散獳牡⁹獡搠物捥整⁤祢䔠杮湩敥⁲‭湩ⴠ挠慨杲ⱥ†畣楲杮‬攠捴Ⱞ†潦⁲唠敮敶畓晲捡獥漠⁦牂捩慗汬挠浯汰瑥⁥潦⁲楦楮桳摥椠整景眠牯⹫⠠偁卓㤠㄰㤬㌰☠㤠㐰 猱⁴䱆住噒汐獡整楲杮㈠洰桴捩湩琠潷挠慯獴眠瑩⁨慢敳挠慯⁴景ㄠ洶桴捩湩䌠⁍ㄨ㘺 湡⁤潴⁰潣瑡漠⁦洴桴捩湩䌠⁍ㄨ㐺 畤慢慲猠潰杮⁥楦楮桳椠据畬楤杮挠獯⁴湡⁤潣癮祥湡散漠⁦污慭整楲污⁳楬敫挠浥湥ⱴ猠牣敥敮⁤慳摮‬慷整⁲瑥⹣‬潴猠瑩ⱥ†湡Ɽ猠污獥☠漠桴牥琠硡獥漠污慭整楲污ⱳ愠汬漠数慲楴湯污‬湩楣敤瑮污愠摮†慬潢牵挠慨杲獥猠捵⁨獡洠硩湩⁧潭瑲牡猬慣晦汯楤杮挠慨杲獥‬楬瑦挠慨杲獥‬楦楮桳湩Ⱨ湩汣摵湩⁧畣瑴湩⁧景䜠潲癯獥眠敨敲敶⁲敮散獳牡⁹獡搠物捥整⁤祢䔠杮湩敥⁲‭湩ⴠ挠慨杲ⱥ†畣楲杮‬攠捴Ⱞ†潦⁲唠敮敶畓晲捡獥漠⁦牂捩慗汬挠浯汰瑥⁥潦⁲楦楮桳摥椠整景眠牯⹫⠠偁卓㤠㄰㤬㌰☠㤠㐰 敓潣摮䘠佌剏ſ䌀楥楬杮瀠慬瑳牥湩⁧楷桴䌠⁍ㄨ㌺ 牐灯›㈱浭琠楨正椠楳杮敬挠慯⁴灳湯⁧楦楮桳椠据畬楤杮挠獯⁴湡⁤潣癮祥湡散漠⁦污慭整楲污⁳楬敫挠浥湥ⱴ猠湡Ɽ眠瑡牥攠捴‬潴猠瑩ⱥ椠据畬楤杮愠摮‬慳敬⁳…瑯敨⁲慴數⁳湯愠汬洠瑡楥污ⱳ愠汬漠数慲楴湯污‬湩楣敤瑮污挠桡杲獥愠摮氠扡畯⁲档牡敧⁳畳档愠⁳業楸杮洠牯慴Ⱳ映湩獩楨杮‬畣楲杮‬瑥Ᵽ挠浯汰瑥⁥潦⁲楦楮桳摥椠整景眠牯䄨卐⁓〹ⰱ〹⤶映牯䘠剉呓䘠佌剏Ŗ匀灵汰⁹景†噐⽃坓⁒楐数†‴杋猯⹱浣愠摮†慌潢牵挠慨杲獥映牯氠祡湩Ⱨ映硩湩⁧湡⁤潣浭獩楳湯湩⁧桴⁥噐⁃楰数⁳湩汣摵湩⁧潣灵敬獲 敢摮⽳琠敥⁳瑥⁣湡⁹楤浡瑥牥椠据畬楤杮映硩湩⁧敮散獳牡⁹楦瑴湩獧氠歩⁥敢摮ⱳ瀠畬獧‬潣灵敬獲‬番据楴湯ⱳ琠敥ⱳ攠捴眠瑩⁨潳癬湥⁴潪湩楴杮愠⁳数⁲瑳湡慤摲瀠慲瑣捩⁥ㄱ洰楤⁡″⁍楓杮敬匠捯敫⁴噐⽃坓⁒楰数ⴠ㐠䬠⽧煳挮啭
畓灰祬漠⁦倠䍖匯剗倠灩⁥㐠䬠⽧煳挮湡⁤䰠扡畯⁲档牡敧⁳潦⁲慬楹杮‬楦楸杮愠摮挠浯業獳潩楮杮琠敨倠䍖瀠灩獥椠据畬楤杮挠畯汰牥⽳戠湥獤 整獥攠捴愠祮搠慩敭整⁲湩汣摵湩⁧楦楸杮渠捥獥慳祲映瑩楴杮⁳楬敫戠湥獤‬汰杵ⱳ挠畯汰牥ⱳ樠湵瑣潩獮‬整獥‬瑥⁣楷桴猠汯敶瑮樠楯瑮湩⁧獡瀠牥猠慴摮牡⁤牰捡楴散㜠洵楤⁡″⁍楓杮敬匠捯敫⁴噐⽃坓⁒楰数ⴠ㐠䬠⽧煳挮♭慅瑲⁨潷歲攠捸癡瑡潩潦⁲畣瑲楡慷汬̊刀楥普牯散⁤敃敭瑮䌠湯牣瑥⁥㉍‵片摡⁥潣牲獥潰摮湩⁧潴䤠⁓㔴‶獵湩⁧〲浭猠穩⁥牧摡摥洠捡楨敮挠畲桳摥栠牡⁤牧湡瑩⁥敭慴挨慯獲⁥条牧来瑡⥥映潲灡牰癯摥焠慵牲⁹湩汣摵湩⁧潣瑳愠摮挠湯敶慹据⁥景愠汬洠瑡牥慩獬氠歩⁥散敭瑮‬楦敮愠杧敲慧整⠠慳摮 潣牡敳愠杧敲慧整‬慷整⁲瑥⹣‬潴猠瑩⁥湡⁤湩汣摵湩⁧湡Ɽ猠污獥☠漠桴牥琠硡獥漠污慭整楲污⁳湩汣摵湩⁧污灯牥瑡潩慮ⱬ椠据摩湥慴湡⁤慬潢牵挠慨杲獥猠捵⁨獡眠楥桧戠瑡档湩Ⱨ洠捡楨敮洠硩湩Ⱨ氠祡湩⁧潣据敲整‬畣楲杮攠捴Ⱞ潣灭敬整戠瑵攠捸畬楤杮挠獯⁴景猠整汥愠摮椠獴映扡楲慣楴湯挠慨杲獥映牯映湩獩敨⁤瑩浥漠⁦潷歲⠠偁卓丠⹯㐠㈰ 楷桴洠湩浩浵挠浥湥⁴潣瑮湥⁴⁀㠳䬰獧䌯浵映潲瑳湡慤摲猠灵汰敩獲愠灰潲敶⁤祢琠敨搠灥牡浴湥⁴湩汣摵湩⁧挠湥整楲杮‬桳瑵整楲杮‬慬楹杮挠湯牣瑥ⱥ瘠扩慲楴杮‬畣楲杮攠捴‮潣灭敬整映牯猠慬⁢景ㄠ〴浭琠楨正䜠佒乕⁄䱆住ⱒ䍒⁃⁍㔲ㄠ㔷浭琠楨正圠楡瑳匠慬⁢片畯摮䘠潬牯̐刀楥普牯散⁤敃敭瑮䌠湯牣瑥⁥㉍‵片摡⁥潣牲獥潰摮湩⁧潴䤠⁓㔴‶獵湩⁧〲浭猠穩⁥牧摡摥洠捡楨敮挠畲桳摥栠牡⁤牧湡瑩⁥敭慴挨慯獲⁥条牧来瑡⥥映潲灡牰癯摥焠慵牲⁹湩汣摵湩⁧潣瑳愠摮挠湯敶慹据⁥景愠汬洠瑡牥慩獬氠歩⁥散敭瑮‬楦敮愠杧敲慧整⠠慳摮 潣牡敳愠杧敲慧整‬慷整⁲瑥⹣‬潴猠瑩⁥湡⁤湩汣摵湩⁧湡Ɽ猠污獥☠漠桴牥琠硡獥漠污慭整楲污⁳湩e

luding all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for slab of 175mm thick Waist GROUND FLOOR[Reinforced Brick Masonary walls of 11.5cm in CM(1:6) using second class bricks of size 23 x 11 x 7 Cm having a crushing strength of not less than 35.00kg/cm2 and using two mild steel bars of 6m dia in every third layer of brick masory, with free joints of the main block work including cost and seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete but excluding the cost of steel and its fabrication charges. Ground FLOORÈFlooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, excluding , etc., complete for finished item of work.. GROUND FLOOR1 Double charged/ multi charged floor Ground FloorÏProviding Skirting to internal walls to 15 cm height and risers of steps with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including , etc., complete for finished item of work..GROUND FLOOR Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for slab of 140mm thick FIRST FLOORZReinforced Brick Masonary walls of 11.5cm in CM(1:6) using second class bricks of size 23 x 11 x 7 Cm having a crushing strength of not less than 35.00kg/cm2 and using two mild steel bars of 6m dia in every third layer of brick masory, with free joints of the main block work including cost and seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete but excluding the cost of steel and its fabrication charges. FIRST FLOORÇFlooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, excluding , etc., complete for finished item of work.. FIRST FLOORÎProviding Skirting to internal walls to 15 cm height and risers of steps with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including , etc., complete for finished item of work..FIRST FLOORæ
Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel (Base Steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm and the sections cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws, including 10mm Square guard bars with 6 (152.4mm) pitch , complete for finished item of work For Double shutter Window with vertical mullion of Size 3'0''x4'0'' ( 914.4mm x 1219.2mm) 1 sqmt1 each°Supply and fixing of PPR Ball Valve conforming to DIN Standards 8077/8092 including cost and conveyance of all materials and labour charges etc., complete. 25mm PPR Ball valve1 rmt1 job×
Supplying & Fixing of ISI mark 25mm dia 2.20mm thick PVC conduit pipe concealed in roof slab with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary, including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, complete for finished item of work. (Pipe Make : Sudhakar / Modi / Atul)á
Supplying & Fixing of ISI mark 25mm dia 1.80mm thick PVC conduit pipe concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary, including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work. (Pipe Make : Sudhakar / Modi / Atul)1 point‘
Supply and fixing of 20W, 2400 lumens T8,not less than 1100mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 with earth connectio & not lessthan two years warranty. Make: Gold medalVibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for 115mm thick slab„
Plastering to even surfaces of wall with CM(1:4) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including and, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906) SECOND FLOORCP long body bib cock fanly<Prince/Sudhakar for equivalent ISI make PVC SWR grade pipes RCC M 25 Sun Shades First Floor&VRCC M 25 125mm thick Slab First Floor%RCC M 25 140mm thick Slab First FloorRCC M 25 115mm thick Slab 1Plastering 12mm thick in Single Coat Second Floor/Plastering 20mm thick in Two Coats second Floor0 Double charged/ multi charged floor First Floor<1.20x2.10 M Double Leaf with Door Frame of Medium Teak wood,M.S. Hollow Square section of size 50x50x4mm, M.S. Hollow Circular section of size 50x6mmRoad formation&Indian make Flat Back Wash Hand Basin25mm PPR Ball valve.180 mm Dia 6kgf PVC casing pipes for borewells>25mm dia 2.20mm thick PVC conduit pipe concealed in roof slab:25mm dia 1.80mm thick PVC conduit pipe concealed in wall :Wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR PVC(6A / 10A 3/2 Pin 2 Module Modular Socket'6A/6A 1 way Combi Socket Modular Socket?Supplying and Run of 2 of 36 / 0.3mm (2.5 Sqmm) FRLS / HFFR PVC?Supplying and Run of 2 of 56 / 0.3mm (4.0 Sqmm) FRLS / HFFR PVC)Batten Holder(BH) /Slanting batten holder(Box type powder coated T8 LED tube light; Sweep 5 star rated Ceiling Fan , with double ball bearings7erecting 2 Module Modular type Electronic step type Fan&4way TPN Horizontal Distribution BoardZ8 Way SPN DB with IP 30 Protection suitable for Single phase Earth Leackage Circuit BrakerProving Independent earthing3Supply and Run of 4 of 10Sq.mm WPSC Aliminium cable6Supply and transportation of 60Watt LED Street light ISupply and fixing of 20W, 2400 lumens T8,not less than 1100mm length LEDVibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Beams SECOND FLOORVibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including and, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab of 125mm thick SECOND FLOOR[Reinforced Brick Masonary walls of 11.5cm in CM(1:6) using second class bricks of size 23 x 11 x 7 Cm having a crushing strength of not less than 35.00kg/cm2 and using two mild steel bars of 6m dia in every third layer of brick masory, with free joints of the main block work including cost and seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete but excluding the cost of steel and its fabrication charges. SECOND FLOOR€
Ceiling plastering with CM (1:3) Prop: 12mm thick in single coat spong finish including cost and conveyance of all materials like cement, sand, water etc, to site, including and, sales & other taxes on all mateials, all operational, incidental cahrges and labour charges such as mixing mortar, finishing, curing, etc, complete for finished item of work (APSS 901,906) for SECOND FLOORÖ
Providing impervious coat to exposed RCC roof slab surface with CM(1:3)20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, and, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work SECOND FLOOR>Supply and fixing of 110mm dia ISI mark PVC rain water spouts Ö
Providing impervious coat to exposed RCC roof slab surface with CM(1:3)20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, and, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work GROUND FLOOR/Painting to new internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911).XPainting to New internal Walls coats of ready mixed oil bound washable distemper acrylic«
Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290 x 200 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for superstructure Walls. FIRST floorSupply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete. U
Manufacture, Supply and Delivery of Cast Iron Pipes and Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988, 3950/1979 and C.I.D Joints confirming to is No.8794/1988 at site of work anywhere in A.P. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties. e
Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP 140mm dia 6kg/Cm2 Rate as per SSR page 81 V
Supply and fixing of M.S.Grills with Mosquito mesh with alround 30x4mm thick flat with middle horizontal-1No welded including Fixing SS ply proof wire mesh of gauge and red oxide primer of grade-1 quality,sales cost and conveyance of all materials to site.all labour charges and fixing in position etc., complete for finished item of work.U
Supply & fixing of M.S.Grill of size 2.80x1.05m with outer angular frame of rolled steel equal 'L' angle of size 30x30x6mm welded with safety bars of 10mm square rods at 100mm centre to centre with 4 horizontal rods & 24 verticle rods inluding cost and conveyance of all materials all labour charges etc., complete for finished item of work."Treads with Polished Granite stone'Flooring with Chequered Cement ConcreteJDoor size 1.05 x 2.10 M Single Leaf with Door Frame of Medium Teak wood Flooring and Treads with Anti - skid Granite (Black) 18-20 mm thick upto 2.43M (For Stair case) set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work.. GROUND FLOORë
Providing Skirting to internal walls and Risers of Steps to 15 cm height with Anti - skid Granite (Black) 18-20 mm thick upto 2.43M (For Stair case) , set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work,..GROUND FLOOR
Supplying & fixing tested gun metal peet valve of Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - make or equivalent screwed type 1st quality of approved type including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors. 25 mm gun metal gategun metal peet valve CI Nahani traps‡Supplying and fixing Nominal Bore G.I. Medium grade pipes properties & weight confirming to relevant IS code 1239 including ISI mark with GI fittings tees, elbows, bends, reducers, couplings, union flanges etc., with necessary excavation in all types of soils except rock requiring blasting, refilling chasing walls, chasing masonry and making good the walls and floors to the original surface and fixing M.S. clamps and T. W. block on walls complete including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors. 25mm GI MediumG.I. Medium grade pipes ¦
Supply and Transportation of 3HP, 5 to 10 Stage,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. Makes : As per list of recommended brands as category I. =3HP, 5 to 10 Stage 10 star rated submersible motor pumpse±Supply of 3 Core 4.00 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster/ Goldmedal/GM #3 Core 4.00 Sqmm Flat Copper cable3Supply and delivery of 48 / 40mm UPVC column pipe 2Supply of 10 Sqmm WPSC (Weather Proof Single Core)180mm Dia PVC Bore CoverDrilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time. as Per SSR 2021-22 (Up to 90m depth)'Drilling of Bore well (Up to 90m depth) Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time. as Per SSR 2021-22 (91m to 150m Depth))Drilling of Bore well (91m to 150m Depth)!Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time. as Per SSR 2021-22 (151m to 250m Depth)*Drilling of Bore well (151m to 250m Depth)—

Supply and Transportation of & & & ., 5star rated submersible motor pumpset, confirming to IS 8034 an

motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: As per list of recommended brands as category I. )5 star rated submersible motor pumpse±Supply of 3 Core 2.50 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster/ Goldmedal/GM 5No of items 124 (ONE HUNDREDE TWENTY FOUR ITEMS) onlyŠName of the Work : - Providing Infrastructure facilities to R&R Colony at Kivvaka (v) (RS.NO. 317) of Kukkunoor Mandal in Eluru District ŸAuguring and boring holes for cast in situ piles in hard black soils and other ordinary soils as per IS 2911-1980 and as per approved design, including shoring, shuttering, sheeting, planking and dewatering etc., including cost and conveyance of all materials and all labour charges and tools and plants etc., complete for finished item of work and putting Reinforced Cement Concrete M 20 grade nominal mix using a minimum quantity of 330 kgs. of cement per 1 cum of concrete usingConcrete MIXER using 20mm gauge (SS5) graded hard granite machine crushed metal aggregate (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc. to site and cost of all materials, including watering, machine mixing, laying concrete etc., complete but excluding cost of steel and its fabrication charges etc., complete for finihsed item of work.4Labor for auguring for Main building piles 350mm Dia/Labor for auguring for varandah piles 300mm diaÿReinforced Cement Concrete nominal mix 0f M20 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as concrete mixer, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 330Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Pile caps.ÿSupply and placing of the Nominal Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and all materials, centering, shuttering, scaffolding with props and WOODEN RAPERS as per the approved shuttering plan and other accessories as per the norms and stability calculations including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Beams GROUND FLOOR Supply and placing of the Nominal Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and all materials, centering, shuttering, scaffolding with props and WOODEN RAPERS as per the approved shuttering plan and other accessories as per the norms and stability calculations including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)e for Slab of 100mm thick GROUND FLOORTReinforced Cement Concrete M20 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site andall materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Sunshades / Chajjas for 75mm thick at Fixed end and 50mm thick at Free end and for a width of 0.60 Mts. etc complete for finished item of work. GROUND FLOOR1 Sqmts™Cost supply and fixing of cement jali of 40 mm thick including cost and conveyance of all materials and labour charges complete for finished item of workÉSupply and fixing doors with cement frame of section 100mm x 65 mm and ISI marked flush door shutters of 30mm thick shutter with bond wood solid block board type Core including cost and conveyance to site of cement frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x 2000mm) ÕSupply and fixing windows of size 0.90x1.20m with cement frame and mullion of section 100mm x 75 mm with Pre laminated cement bonded particle board- 12 mm thick , , supply and fixing 4 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 4Nos butt hinges 100mm long per each shutter, 2 Nos tower bolt of 100 mm per each shutter , 2No 125 mm long handle per each shutter, 10mm MS square bars horizontally at 125mm centre to centre including fixing the fixtures to window with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing the grill etc. complete for finished item of work .Ú
Supply and fixing of ISI mark 20mm dia 1.55mm thick PVC conduit pipe Sudhakar / Macoplast / Modi make concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary , including necessary masonery work for light/fan pointand seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work•RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. complete for Slab of 25mm thick SHELVES Nominal Mix GROUND FLOORˆRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. complete for Slab of 40mm thick SHELVES Nominal MixO
Supply and Run of 2 of 6 Sq.mm (7/18) WPSC ISI Aluminium wire of makes Finolex / Polycab/ Gold Medal /million /Payal/ Power Flex along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.·
Gronolithie Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete, including , etc., complete for finished item of work,
Supply and delivery of Crusher stone dust from approved quarries including cost and conveyance to work spot, seignorage charges including labour charges for stacking at site to departmental gauge including filling, spreading, sectioning, watering and ramming etc., complete as per S.S.Plain Cement Concrete M15 grade nominal mix proportion (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Broken Granite (IS383, 1970) Machine Crushed graded metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including , sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) for haunches
VRCC M15 gradse using 20mm and 10mm HBG crushed metal with 330 Kgs of cement per 1 cum of concrete mechanically mixed, placed in positiom vibrating including curing for 14days complete as per drawings and technical specifications clause 802,803,1202 & 1202 MORD and 1500,1700 and 2100 MORTH including overhead charges and contract profit but excluding seignorage charges for 0.25m thick internal drain side walls.
VRCC M15 gradse using 20mm and 10mm HBG crushed metal with 330 Kgs of cement per 1 cum of concrete mechanically mixed, placed in positiom vibrating including curing for 14days complete as per drawings and technical specifications clause 802,803,1202 & 1202 MORD and 1500,1700 and 2100 MORTH including overhead charges and contract profit but excluding seignorage charges for 0.18m thick internal drain side walls.
VRCC M15 gradse using 20mm and 10mm HBG crushed metal with 330 Kgs of cement per 1 cum of concrete mechanically mixed, placed in positiom vibrating including curing for 14days complete as per drawings and technical specifications clause 802,803,1202 & 1202 MORD and 1500,1700 and 2100 MORTH including overhead charges and contract profit but excluding seignorage charges for 0.30m thick internal drain side walls.Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab of 200mm thickSupply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials, centering, shuttering, scaffolding with props and steel plate as per the approved shuttering plan and other accessories as per the norms and stability calculations including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Footings.Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials, centering, shuttering, scaffolding with props and steel plate as per the approved shuttering plan and other accessories as per the norms and stability calculations including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). for PLINTH BEAM&Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials, centering, shuttering, scaffolding with props and steel plate as per the approved shuttering plan and other accessories as per the norms and stability calculations including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). for Columns GROUND FLOORAMasonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 200mmx 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). for Compound Walls#Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 400 x 400 mm and thickness 25 mm of any shades.and white cement to get required reflective glazing, set over base coat of CM (1:8) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work,%Construction of Granular sub-base by providing coarse graded material of grading-III of MORT & HT table 400-1 including cost seignorage charges excluding CP & TP on and conveyance of all materials to work site and spreading in uniform layers with motor grader by approved means on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density etc., complete as per MORT & H specification clause No.401 for finished item of work as directed by the departmental authorities.GProviding, Laying, Spreading and compacting graded HBG/HBT crushed stone aggregate to Wet Mix macadam specification including cost, of all materials and including premixing the material with water at OMC in Mechanical mixer(Pug Mill) carriage of mixed material by tipper to site , laying in uniform layers in base courses on well prepared surface and compacting with Smooth wheeler roller of 80 to 100kN weight to achieve desired density including lighting, barricading and maintanence of diversion etc., as per table 400 11 &400 12 and technical specification. Clause 406 of MORD!Construction of Granular sub-baseWet Mix macadam400.11 & 400.12 & 406óConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including cost and conveyance of all materials, labour charges, centering, VAT, overheads and contractor profit etc., complete for finished item of work.8Construction of un-reinforced M30 grade for CC Pavementï
Construction of Gravel shoulders with naturally occuring gravel including cost, seigniorage charges and conveyance of all materials to work site and spreading in uniform layers by with motor graded on prepared surface, by mixing by mix in place method with rotovator and compacting with smooth wheeled roller to achieve the desired density at OMC etc., as per MoRT&H Specification 401& 407 (4th revision) and 408 MORD as directed by the Engineer-in-charge complete for finished item of work.401, 407 & 4082Supply and placing of the Nominal Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering, shuttering, scaffolding with props and steel plate as per the approved shuttering plan and other accessories as per the norms and stability calculations including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). for PLINTH BEAM9Supply and placing of the Nominal Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering, shuttering, scaffolding with props and steel plate as per the approved shuttering plan and other accessories as per the norms and stability calculations including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). for Slab of 75mm thickDSupply and placing of the Nominal Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering, shuttering, scaffolding with props and steel plate as per the approved shuttering plan and other accessories as per the norms and stability calculations including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). complete for Lintels GROUND FLOOR>Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 200mmx 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). up to basement.BMasonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 200mmx 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). for Super Structure
Supply and fixing of Bath room / Toilet door shutter with 16mm BISON Lam (IS 14276) door shutter with all-round  U lipping of PPS section of size 12mm X 18mmX12mmX0.6mm thickness with a hardware of 12mm dia X200mm long aluminum aldrop  2 nos( ISI make)2 No of 125mm long handles(ISI make) and also 3 no Of IS304 grade Patee Hinges 3mmX12mmX180mm long with pole receiver of 10mm dia pole X40mm long we

Providing Skirting to internal walls to height of 15cm and Risers with ceramic tiles Non-skid red or white full body Ceramic floor tiles of size 300x300mm and thickness between 7-8 mm 1st quality conforming to IS:13711,IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including , etc., complete for finished item of work,

Supply and fixing of Door size 1.20 x 2.10 M Double Leaf with Door Frame of Sal wood Section 100 mm x 75 mm along with Double flush door shutters solid bond wood block board type with commercial ply on both faces 35mm thick including fixtures such as Hardware fixtures ie., MSPC Butt Hinges 125mm Long 6 nos, MSPC Handles 125 mm Long 2 Nos, MSPC Tower Bolt 150mm long 2 Nos, MSPC Aldrop 300 mm long 1 no, MS Hold Fast 6 Nos and Heavy Duty Door Stopper 2 Nos., including Including Labour charges for making of door, fixing of fixtures etc., and cost and conveyance of all materials to site, taxes extra for finished item of work.

Providing and fixing factory made solid Wood polymer Composite (WPC) Single extruded Door frame Section of size 45x75mm. The two vertical members are to be joined togather with thehorizontal member using 8x50mm long MS Star full thread screw to be used reverse forward speed control hand drilling machine. The Ready/Assembled door frame is fixed to the wall using hold fast or bolt fasteners.A minimum of 4no's of screws to be provided for each vertical member & minimum 2no's for Horizontal member with encapsulation of 8mm rigid layer on the six surfaces. The Door frame will have a rebat of 32mm complete for finished item of work

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Labor Charges for Providing Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.

White washing two coats with paint grade white lime for wash or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls

Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)

Painting to new internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911)

Supply and fixing of 110mm dia ISI mark PVC rain water spouts of 2.5mm thick including cost of necessary PVC bends, shoes and pipe clips and all other accessories and fixing in position including cost and conveyance of all materials to site sales and other taxes on all materials, all operational, incidental and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practicesuch as fixing in alignment etc., complete for finished item of work. (APSS NO. 1328)

Supply and Fixing of 50mm thick Cement Jali including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete for finished item of work in All Floors.

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, sales and other taxes on all materials etc., complete for finished item of work. (A.P.S.S. No. 1325).

Supplying & Fixing Orissa Pan 580 mm x 440 mm white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI mark 580 mm x 440mm as approved by the Engineer-in-charge fixed in brick masonry with necessary ‘S’ trap of water closet, shall be encased in C.C. (1:2:4) 6" alround well above the joint, to stop leakage at the joint, cost & conveyance of all materials and labour charges etc., including sales and other taxes on all materials complete for finished item of work for all floors.

Supplying & Fixing 12.7mm N.P bib tap Indian make 300 grams Seiko / Nice/ Senior or equivalent including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Constructing 457.2mm x 457.2mm ( 1'-6" x 1'-6") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mm x 457.2mm ( 1'-6" x 1'-6") C.I. frame and cover of 20Kg. including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work.

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/ Seimens/BCH /KSP(Karunya) /Crompton. complete.

Supply of 3 Core 4.0 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster/ Goldmedal/GM

Geological Survey Charges

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation PN 1.60 Mpa 100 mm

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete. PN 1.60 Mpa 100 mm

Earth work excavation for foundations manual means and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building foundations

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, seigniorage charges, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Curtain wall

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Plain Cement Concrete M15 grade nominal mix (1:2.5:5) proportion (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Broken Granite (IS383, 1970) Machine Crushed graded metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including , sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for Septic Tank (APSS No. 402)

Supply and fixing of Door size 1.20 x 2.10 M Double Leaf with Door Frame of Medium Teak wood Section 100 mm x 75 mm along with Double flush door shutters solid bond wood block board type with commercial ply on both faces 35mm thick including fixtures such as Hardware fixtures ie., MSPC Butt Hinges 125mm Long 6 nos, MSPC Handles 125 mm Long 2 Nos, MSPC Tower Bolt 150mm long 2 Nos, MSPC Aldrop 300 mm long 1 no, MS Hold Fast 6 Nos and Heavy Duty Door Stopper 2 Nos., including Including Labour charges for making of door, fixing of fixtures etc., and cost and conveyance of all materials to site, taxes extra for finished item of work.

Supply and fixing of Door size 1.05 x 2.10 M Single Leaf with Door Frame of Medium Teak wood Section 100 mm x 75 mm, and Single flush door shutter solid bond wood block board type with commercial ply on both faces 35mm thick Hardware fixtures ie., MSPC Butt Hinges 125mm Long 3 nos, MSPC Handles 125 mm Long 1 No, MSPC Tower Bolt 150mm long 1 Nos, MSPC Aldrop 300 mm long 1 no, MS Hold Fast 6 Nos, and Heavy Duty Door Stopper 1 Nos., Including Labour charges for making of door, fixing of fixtures etc., and cost and conveyance of all materials to site, taxes extra for finished item of work.

Supply and fixing of 110mm dia ISI mark PVC rain water spouts of 2.5mm thick including cost of necessary PVC bends, shoes and pipe clips and all other accessories and fixing in position including cost and conveyance of all materials to site sales and other taxes on all materials, all operational, incidental and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practicesuch as fixing in alignment etc., complete for finished item of work. (APSS NO. 1328)

Providing and fixing factory made solid Wood polymer Composite (WPC) Single extruded Door frame Section of size 45x75mm. The two vertical members are to be joined togather with thehorizontal member using 8x50mm long MS Star full thread screw to be used reverse forward speed control hand drilling machine. The Ready/Assembled door frame is fixed to the wall using hold fast or bolt fasteners.A minimum of 4no's of screws to be provided for each vertical member & minimum 2no's for Horizontal member with encapsulation of 8mm rigid layer on the six surfaces. The Door frame will have a rebat of 32mm complete for finished item of work

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

White washing two coats with paint grade white lime for wash or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls

Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)

Constructing 457.2mm x 457.2mm ( 1'-6" x 1'-6") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mm x 457.2mm ( 1'-6" x 1'-6") C.I. frame and cover of 20Kg. including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work.

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, sales and other taxes on all materials etc., complete for finished item of work. (A.P.S.S. No. 1325).)

Supplying & Fixing Orissa Pan 580 mm x 440 mm white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI mark 580 mm x 440mm as approved by the Engineer-in-charge fixed in brick masonry with necessary ‘S’ trap of water closet, shall be encased in C.C. (1:2:4) 6" alround well above the joint, to stop leakage at the joint, cost & conveyance of all materials and labour charges etc., including sales and other taxes on all materials complete for finished item of work for all floors.

Supplying & Fixing 12.7mm N.P bib tap Indian make 300 grams Seiko / Nice/ Senior or equivalent including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supplying & fixing CI Nahani traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs with N.P. Cover for all floors, including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. (APSS No 1326) for All Floors.

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/ Seimens/BCH /KSP(Karunya) /Crompton. complete.

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/ Seimens/BCH /KSP(Karunya) /Crompton. complete.

Supply of 10 Sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire. Makes: Gold Medal / Million / GM / Vimal / Finecab / Nakoda / Nanadicab / Payal / Sudhakar/ Rajnigandha/ Airson/ Orbit / ollvin., complete for service mains.

Supply and fixing of 180mm Dia PVC Bore Cover as per SSR 2021-22

Supply and fixing of 180 mm Dia 6kgf PVC casing pipes for borewells for potable water supply conforming to IS : 4985/2000 (3rd revision) as amended from time to time

Geologist Charges as per SSR

Wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR PVC insulated 110V grade Copper Cable in the existing metallic / non-metallic conduct pipe with 6A / 10A 1 Way 1 Module Modular Switch, Celling rose and 8 Modular Horizontal / Vertical Cover Frame covering to switck control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Building.

Supplying and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A/10A switch control of Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal make with ISI mark on a common switch board with earth continuity including wire leads, earth connection including cost and conveyance of all materials to site, labour charges and sales tex etc., complete for finished item of work.

Supplying and fixing of 16A/6A 1 way Combi Socket Modular Socket with shutter and 16A switch control 5 in 1 on decolam sheet covered board including earth connection and all labour charges etc., complete.

Supplying and Run of 2 of 36 / 0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for mains/circuits/MV Lamps/Security light points and one run of 14/3.0mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for earthing in existing conduit pipe, including cost and conveyance of all materials and all labour charges etc., complete. (Phase, Neutral and earth)

Supplying and Run of 2 of 56 / 0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for mains/circuits/MV Lamps/Security light points and one run of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for earthing in existing conduit pipe, including cost and conveyance of all materials and all labour charges etc., complete. (Phase, Neutral and earth)

Supplying and fixing of Batten Holder(BH) /Slanting batten holder (SBH) in lieu of celling rose of light point complete with allconnetions and all labour charges with 7Watt LED bulb etc., complete for new installation.

Supplying and fixing of Batten Holder(BH) /Slanting batten holder (SBH) in lieu of celling rose of light point complete with allconnetions and all labour charges with 0.5Watt LED bulb etc., complete for new installation.

Supply of 1200 mm length, Box type powder coated T8 LED tube light luminaire with necessary wiring suitable for fixing 1 No retrofit T8 LED tube but without tube and choke Makes:Greenlites / Fortune Art / Capart / GM / Goldmedal /Trinic/Kiran.

Supply of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes :Crompton HS Plus / Havells ES PLUS/Orient Energy Star/ Halonix(Zephyr)/ Polycab(Synergy 50 ISI) / G.M. (Air Wave Premium with all accessories including giving connections and all labour charges etc., complete complete

Supplying and erecting 2 Module Modular type Electronic step type Fan Regulator for ceilling fans 900/1200/1400mm sweep complete erected on existing board including cost and conveyance of all materials and all labour charges etc., complete.

Supply and fixing of (8 +12) 4way TPN Horizontal Distribution Board with IP-30 Protection, 12 Nos ELCB / RCCB / FP Isolator as incommer and 10kA SP MCB's as out going including 1No 40A FP pole isolator and 12 Nos 6-32A range single pole MCB's including internal connections all labour charges etc., complete (Electrical Specification No. 4.4.3.B)

Supply and fixing of 8 Way SPN DB with IP 30 Protection suitable for Single phase Earth Leackage Circuit Braker (ELCB) / Residual Current Circuit Braker (RCCB) / Double Pole (DP) Isolator as incommer and 10kA SP MCB's as out going MCB's including internal connection, including labour charges for flush mounting, 1No 40A DP Isolator / RCCB / ELCB for incomer, 6-32A MCB's 6 Nos for outgoing etc., complete (Electrical Specification No. 4.4.1B)

Proving Independent earthing by excavating a trench to a depth of 2.1m in all soils as per size specified in data, using 40mm dia 'B' class GI Pipe of 2.5m length with necessary accessories duly providing 12mm dia 16Nos. Holes and rewired bolts, nuts and washers, checknuts, Humes pipe ring etc., as per IS specifications with necessary double GI earth wire No.8 SWG including filling with equal preparation of salt and charcoal in layers and all labour charges etc., complete.

Supply and Run of 4 of 10Sq.mm WPSC Aliminium cable along with No.10 SWG G.I bearer wire on both sides through PVC cleats with all accessories including labour charges etc., complete for service mains.

Supply and transportation of 60Watt LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 95 lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection ≥ 5KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : WIPRO / PHILIPS (GREEN LINE) / Lighting Technologies(Adornis) / SCHREDER (BRIKA) / GE / CROMPTON (HAWK) / BAJAJ (EDGE+) / HALONIX (LUMOS - SUPER) / HAVELLS (ENDURA CITYLINER NEO) /Capart(Premium) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG

Earth work excavation for foundations manual means and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building foundations

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, seigniorage charges, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Curtain wall

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Plain Cement Concrete M15 grade nominal mix (1:2.5:5) proportion (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Broken Granite (IS383, 1970) Machine Crushed graded metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including , sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for Septic Tank (APSS No. 402)

Supply and fixing of Door size 1.20 x 2.10 M Double Leaf with Door Frame of Medium Teak wood Section 100 mm x 75 mm along with Double flush door shutters solid bond wood block board type with commercial ply on both faces 35mm thick including fixtures such as Hardware fixtures ie., MSPC Butt Hinges 125mm Long 6 nos, MSPC Handles 125 mm Long 2 Nos, MSPC Tower Bolt 150mm long 2 Nos, MSPC Aldrop 300 mm long 1 no, MS Hold Fast 6 Nos and Heavy Duty Door Stopper 2 Nos., including Including Labour charges for making of door, fixing of fixtures etc., and cost and conveyance of all materials to site, taxes extra for finished item of work.

Supply and fixing of Door size 1.05 x 2.10 M Single Leaf with Door Frame of Medium Teak wood Section 100 mm x 75 mm, and Single flush door shutter solid bond wood block board type with commercial ply on both faces 35mm thick Hardware fixtures ie., MSPC Butt Hinges 125mm Long 3 nos, MSPC Handles 125 mm Long 1 No, MSPC Tower Bolt 150mm long 1 Nos, MSPC Aldrop 300 mm long 1 no, MS Hold Fast 6 Nos, and Heavy Duty Door Stopper 1 Nos., Including Labour charges for making of door, fixing of fixtures etc., and cost and conveyance of all materials to site, taxes extra for finished item of work.

Supply and fixing of 110mm dia ISI mark PVC rain water spouts of 2.5mm thick including cost of necessary PVC bends, shoes and pipe clips and all other accessories and fixing in position including cost and conveyance of all materials to site sales and other taxes on all materials, all operational, incidental and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practicesuch as fixing in alignment etc., complete for finished item of work. (APSS NO. 1328)

Providing and fixing factory made solid Wood polymer Composite (WPC) Single extruded Door frame Section of size 45x75mm. The two vertical members are to be joined togather with thehorizontal member using 8x50mm long MS Star full thread screw to be used reverse forward speed control hand drilling machine. The Ready/Assembled door frame is fixed to the wall using hold fast or bolt fasteners.A minimum of 4no's of screws to be provided for each vertical member & minimum 2no's for Horizontal member with encapsulation of 8mm rigid layer on the six surfaces. The Door frame will have a rebat of 32mm complete for finished item of work

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

White washing two coats with paint grade white lime for wash or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls

Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)

Constructing 457.2mm x 457.2mm ( 1'-6" x 1'-6") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mm x 457.2mm ( 1'-6" x 1'-6") C.I. frame and cover of 20Kg. including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work.

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, sales and other taxes on all materials etc., complete for finished item of work. (A.P.S.S. No. 1325).)

Supplying & Fixing Orissa Pan 580 mm x 440 mm white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI mark 580 mm x 440mm as approved by the Engineer-in-charge fixed in brick masonry with necessary ‘S’ trap of water closet, shall be encased in C.C. (1:2:4) 6" alround well above the joint, to stop leakage at the joint, cost & conveyance of all materials and labour charges etc., including sales and other taxes on all materials complete for finished item of work for all floors.

Supplying & Fixing 12.7mm N.P bib tap Indian make 300 grams Seiko / Nice/ Senior or equivalent including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supplying & fixing CI Nahani traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs with N.P. Cover for all floors, including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. (APSS No 1326) for All Floors.

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/ Seimens/BCH /KSP(Karunya) /Crompton. complete.

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/ Seimens/BCH /KSP(Karunya) /Crompton. complete.

Supply of 10 Sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire. Makes: Gold Medal / Million / GM / Vimal / Finecab / Nakoda / Nanadicab / Payal / Sudhakar/ Rajnigandha/ Airson/ Orbit / ollvin., complete for service mains.

Supply and fixing of 180mm Dia PVC Bore Cover as per SSR 2021-22

Supply and fixing of 180 mm Dia 6kgf PVC casing pipes for borewells for potable water supply conforming to IS : 4985/2000 (3rd revision) as amended from time to time

Geologist Charges as per SSR

Wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR PVC insulated 110V grade Copper Cable in the existing metallic / non-metallic conduct pipe with 6A / 10A 1 Way 1 Module Modular Switch, Celling rose and 8 Modular Horizontal / Vertical Cover Frame covering to switck control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Building.

Supplying and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A/10A switch control of Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal make with ISI mark on a common switch board with earth continuity including wire leads, earth connection including cost and conveyance of all materials to site, labour charges and sales tex etc., complete for finished item of work.

Supplying and fixing of 16A/6A 1 way Combi Socket Modular Socket with shutter and 16A switch control 5 in 1 on decolam sheet covered board including earth connection and all labour charges etc., complete.

Supplying and Run of 2 of 36 / 0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for mains/circuits/MV Lamps/Security light points and one run of 14/3.0mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for earthing in existing conduit pipe, including cost and conveyance of all materials and all labour charges etc., complete. (Phase, Neutral and earth)

Supplying and Run of 2 of 56 / 0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for mains/circuits/MV Lamps/Security light points and one run of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for earthing in existing conduit pipe, including cost and conveyance of all materials and all labour charges etc., complete. (Phase, Neutral and earth)

Supplying and fixing of Batten Holder(BH) /Slanting batten holder (SBH) in lieu of celling rose of light point complete with allconnetions and all labour charges with 7Watt LED bulb etc., complete for new installation.

Supplying and fixing of Batten Holder(BH) /Slanting batten holder (SBH) in lieu of celling rose of light point complete with allconnetions and all labour charges with 0.5Watt LED bulb etc., complete for new installation.

Supply of 1200 mm length, Box type powder coated T8 LED tube light luminaire with necessary wiring suitable for fixing 1 No retrofit T8 LED tube but without tube and choke Makes:Greenlites / Fortune Art / Capart / GM / Goldmedal /Trinic/Kiran.

Supply of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes :Crompton HS Plus / Havells ES PLUS/Orient Energy Star/ Halonix(Zephyr)/ Polycab(Synergy 50 ISI) / G.M. (Air Wave Premium with all accessories including giving connections and all labour charges etc., complete complete

Supplying and erecting 2 Module Modular type Electronic step type Fan Regulator for ceilling fans 900/1200/1400mm sweep complete erected on existing board including cost and conveyance of all materials and all labour charges etc., complete.

Supply and fixing of (8 +12) 4way TPN Horizontal Distribution Board with IP-30 Protection, 12 Nos ELCB / RCCB / FP Isolator as incommer and 10kA SP MCB's as out going including 1No 40A FP pole isolator and 12 Nos 6-32A range single pole MCB's including internal connections all labour charges etc., complete (Electrical Specification No. 4.4.3.B)

Supply and fixing of 8 Way SPN DB with IP 30 Protection suitable for Single phase Earth Leackage Circuit Braker (ELCB) / Residual Current Circuit Braker (RCCB) / Double Pole (DP) Isolator as incommer and 10kA SP MCB's as out going MCB's including internal connection, including labour charges for flush mounting, 1No 40A DP Isolator / RCCB / ELCB for incomer, 6-32A MCB's 6 Nos for outgoing etc., complete (Electrical Specification No. 4.4.1B)

Proving Independent earthing by excavating a trench to a depth of 2.1m in all soils as per size specified in data, using 40mm dia 'B' class GI Pipe of 2.5m length with necessary accessories duly providing 12mm dia 16Nos. Holes and rewired bolts, nuts and washers, checknuts, Humes pipe ring etc., as per IS specifications with necessary double GI earth wire No.8 SWG including filling with equal preparation of salt and charcoal in layers and all labour charges etc., complete.

Supply and Run of 4 of 10Sq.mm WPSC Aliminium cable along with No.10 SWG G.I bearer wire on both sides through PVC cleats with all accessories including labour charges etc., complete for service mains.

Supply and transportation of 60Watt LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 95 lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection ≥ 5KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : WIPRO / PHILIPS (GREEN LINE) / Lighting Technologies(Adornis) / SCHREDER (BRIKA) / GE / CROMPTON (HAWK) / BAJAJ (EDGE+) / HALONIX (LUMOS - SUPER) / HAVELLS (ENDURA CITYLINER NEO) /Capart(Premium) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG

Earth work excavation for foundations manual means and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building foundations

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Flooring with ceramic tiles Non-skid red or white full body Ceramic floor tiles of size 300x300mm and thickness between 7-8 mm 1st quality conforming to IS:13711,IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Dadooing to walls with red or white full body ceramic wall tiles of size 200x300mm/ 245 mm x325mm and thickness 6 mm 1st quality conforming to IS:13711,IS:13712,IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, and all opertional, incidental and all labour charges such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work in all floors

White washing two coats with paint grade white lime for wash or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls

Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)

Constructing 457.2mm x 457.2mm ( 1'-6" x 1'-6") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mm x 457.2mm ( 1'-6" x 1'-6") C.I. frame and cover of 20Kg. including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work.

Supplying & Fixing 550 x 400 mm Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore single Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso/Nice/Senior or equivalent complete with standard CI brackets including wooden block, 12.7mm PVC connection with Brass union nut CP coated, 12.7mm dia first qualifty NP angle stop cock, 38.1mm CP waste coupling , 31.75mm dia PVC flexible waste pipe of 914.4mm length of first quality including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. for All Floors.

Supplying & Fixing Orissa Pan 580 mm x 440 mm white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI mark 580 mm x 440mm as approved by the Engineer-in-charge fixed in brick masonry with necessary ‘S’ trap of water closet, shall be encased in C.C. (1:2:4) 6" alround well above the joint, to stop leakage at the joint, cost & conveyance of all materials and labour charges etc., including sales and other taxes on all materials complete for finished item of work for all floors.

Supplying and fixing NP Soap Dish heavy type with NP SCREWS duly embedded in the Brick Masonry wall complete for finished item of work for all floors, including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Supplying & Fixing 12.7mm N.P bib tap Indian make 300 grams Seiko / Nice/ Senior or equivalent including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/ Seimens/BCH /KSP(Karunya) /Crompton. complete.

Supplying and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A/10A switch control of Legrand Myrius / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal make with ISI mark on a common switch board with earth continuity including wire leads, earth connection including cost and conveyance of all materials to site, labour charges and sales tex etc., complete for finished item of work.

Supplying and Run of 2 of 36 / 0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for mains/circuits/MV Lamps/Security light points and one run of 14/3.0mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for earthing in existing conduit pipe, including cost and conveyance of all materials and all labour charges etc., complete. (Phase, Neutral and earth)

Supplying and fixing of Batten Holder(BH) /Slanting batten holder (SBH) in lieu of celling rose of light point complete with allconnetions and all labour charges with 7Watt LED bulb etc., complete for new installation.

Supply of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes :Crompton HS Plus / Havells ES PLUS/Orient Energy Star/ Halonix(Zephyr)/ Polycab(Synergy 50 ISI) / G.M. (Air Wave Premium with all accessories including giving connections and all labour charges etc., complete complete

Supplying and erecting 2 Module Modular type Electronic step type Fan Regulator for ceilling fans 900/1200/1400mm sweep complete erected on existing board including cost and conveyance of all materials and all labour charges etc., complete.

Supply and fixing of 8 Way SPN DB with IP 30 Protection suitable for Single phase Earth Leackage Circuit Braker (ELCB) / Residual Current Circuit Braker (RCCB) / Double Pole (DP) Isolator as incommer and 10kA SP MCB's as out going MCB's including internal connection, including labour charges for flush mounting, 1No 40A DP Isolator / RCCB / ELCB for incomer, 6-32A MCB's 6 Nos for outgoing etc., complete (Electrical Specification No. 4.4.1B)

Proving Independent earthing by excavating a trench to a depth of 2.1m in all soils as per size specified in data, using 40mm dia 'B' class GI Pipe of 2.5m length with necessary accessories duly providing 12mm dia 16Nos. Holes and rewired bolts, nuts and washers, checknuts, Humes pipe ring etc., as per IS specifications with necessary double GI earth wire No.8 SWG including filling with equal preparation of salt and charcoal in layers and all labour charges etc., complete.

Supply and Run of 4 of 10Sq.mm WPSC Aliminium cable along with No.10 SWG G.I bearer wire on both sides through PVC cleats with all accessories including labour charges etc., complete for service mains.