Replacement and Additional alteration of E.I. and safety devices in Government Hospital at Nagrota Bagwan Distt. Kangra (HP)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required..(Make:-Finolex,KEI,Anchor,L&T for wire )[Legrand (Myrius),L&T(Oris),Anchor(Roma plus) for accessories]

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required..(Make:-Finolex,KEI,Anchor,L&T for wire )[Legrand (Myrius),L&T(Oris),Anchor(Roma plus) for accessories]

Group C.

Re-wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed Steel / PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable including dismantling of the existing wiring as required. (excluding switch & sheet etc.)

Group C.

Wiring for light plug with 2x2.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.2.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Make:-KEI/SCI/Havells/Plaza)

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Make:-KEI/SCI/Havells/Plaza)

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. (Make:-KEI/SCI/Havells/Plaza)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(Make:-KEI/SCI/Havells/Plaza)

2x2.5 Sq. mm.

2x6.0 Sq. mm.

2x16 Sq. mm.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. (Make:-KEI/SCI/Havells/Plaza)

3x2.5 Sq. mm.

3x4.0 Sq. mm.

6x4.0 Sq. mm.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required(Make:-BEC, AKG, Kalinga / Diplast )

25 mm dia

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

2 modules (78mmx78mmx50mm)(Make:-Legrand,L&T,Schneider )

6 modules(205mmx78mmx50mm)(Make:-Legrand,L&T,Schneider )

8 modules(205mmx78mmx50mm)(Make:-Legrand,L&T,Schneider )

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

Supplying and fixing Electric Switch board having 3 No. of 5 amp switches and socket on suitable size of G.I Modular box of 205 mmx135 mm x60mm deep size with modular plate and cover in recess including providing and fixing 3 No 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.(Make:-Legrand,L&T,Schneider)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.Make:-Legrand (Myrius),L&T(Oris),Anchor(Roma plus)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as requiredMake:-Legrand (Myrius),L&T(Oris),Anchor(Roma plus).

Supplying and fixing following rating Moduler switch /socket on the existing switch box / cover including connections etc. ,as required.

S.P. 25 Amps one way Modular switch.

25 Amps Socket Modular .

Make:-Legrand (Myrius),L&T(Oris),Anchor(Roma plus)

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

MATERIAL:

MAIN INCOMER :-MCCB 400A, 4P 36 kA 1 Nos breaking capacity with adjustable thermal mangnetic release-1 Nos L&T Cat no CM94102OOT1OG/ABB/Schneider

OUTGOING :

MCCB 200 Amp 3Pole 36 kA 2 Nos and 63 Amp 36 KA 1 Nos with thermal magnetic release L&T Cat NoDZ1T0063NXD1A-/ABB/Schneider,,MCCB 200 Amp,3Pole 50kA 2 Nos with TMR L&T Cat No-CM92006OOP1OG/ABB/Schneider,MCCB 63 Amp ,3Pole 50 kA 1 Nos with TMR L&T Cat No-CM92005OOL1OG/ABB/Schneider,

MATERIAL:

MAIN INCOMER :-MCCB 200A, 4P 50 kA 1 Nos breaking capacity with adjustable thermal mangnetic release-1 Nos L&T Cat No-CM92106OOP1OG /ABB/Schneider

OUTGOING :

MCCB 100 Amp ,3Pole 36 kA 1 Nos with thermal magnetic release L&T Cat No-CM92008OOL1OG/ABB/Schneider,,MCCB 125 Amp,3Pole 36kA 1 Nos with thermal magnetic release L&T Cat No-CM92008OOM1OG/L&T/Schneider,

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(Make:-Hagger,Legrand,L&T )

6 amp Single pole. Cat-A.

16 amp Single pole. Cat-A.

25 amp Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make:-Hagger,Legrand,L&T )

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make:-Hagger,Legrand,L&T )

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-(Make:-Hagger,Legrand,L&T )

Double door-6 way

Double door-8 way

Double door-12 way

Double door-16 way

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-

Armoured cable 150 sq. mm (3.5 core)

(Make:-KEI/SCI/Havells/Plaza)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 150 sq. mm (3.5 core)

(Make:-KEI/SCI/Havells/Plaza)

Providing and installation of Ceiling fan with step type fan regulator modular,air delivery 215m3/min power input 30watts speed 330 RPM includingf wiring the down rods of standard lenght(upto 30cm) with 16/0.20mm twin twisted felxible cotton braided copper cable including providing and fixing phenolic laminated sheet cover on the fan box and eartging required :-

Ceiling Fan 1200 mm sweep, Category-A

( Usha-Technixplus BEE 3 Star rated model)makeUsha,Crompton,aaanchor )(Minimum BEE 3 star rating)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Makes:- Bajaj / Usha / Crompton

Providing and fixing following watt LED bulk head fitting die cast aluminium body with IP-65 protection of all sizes and shapes including making connections efficacy > 100 lumiens per watt,harmonics distortion < 10,CRI >80 ,Power factor > 0.95, testing and commissioning etc. as required complete in all respects.

10 Watt LED bulk head.

Bulk head 10 Watt Panasonic ( Cat NO :- PBHMO1107),Phillips & Jaguar

Providing and fixing LED square, Surface mounted LED 15 watt downlight luminaire with die cast aluminium housing in white PC finish ,specially designed heat sink,anti glare diffuser and integrated energy efficient electronic driver. it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, complete with all accessories, connections, testing and commissioning etc. as required.. LED circular, Surface mounted LED 10 watt downlight luminaire)

LED surface mounted Circular LED downlight (15 watt)

(Make:-Tisva,Pansonic & Philips ) (At per Panasonic Cat No PDLM11104)

Providing and fixing surface mounted LED 4`x1` luminaire deep drawn CRCA aluminium housing with high power LED seamless front frame with flat white high transmission acrylic coverand it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, including one no. tube rod 18 Watt complete with all accessories, connections, testing and commissioning etc. as required.LED 4`x1` luminaire panasonic )

LED surface mounted LED 4`x1`, 36 watt

((Make:-Tisva,Pansonic & Philips ) (At per Panasonic Cat No. PBLM15368) )

Providing and fixing indoor decorative aluminium extruded LED Tube fixture of following rating and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

LED tube fixture 18 Watt Havells (Cat. No. Batten 1X18WDSBSWH)

Providing and fixing LED Base light, Recess mounted LED 36 watt with CRCA powered ,anti glair diffuser with seprate energy efficient electronic driver. it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, including one no. tube rod 18 Watt complete with all accessories, connections, testing and commissioning etc. as required..LED Base light, Recess mounted LED 2`x2` luminaire 36 watt

LED 36 watts 2`x2` surface/recess

Make:- (Tisva,Pansonic & Philips )Panasonic ( Cat NO :- PBLM21364)

Providing, Installation, testing and commissioning of wall mounted cabin fan 300mm complete with all accessories including making connections, testing etc. as required. Complete in all respect.

Maxx Air Dew Wall fan (300mm) Make:-Usha/cromptom/Bajaj

Malhotra Associates

Deepak Sood