Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹7.8 L+₹44,445 (6.08%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest bidder | |
| 3 | L3₹7.8 L+₹47,104 (6.44%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest bidder | |
| 4 | L4₹7.9 L+₹55,110 (7.53%)Rejected-Finance | L4 | Rejected-Finance 4th lowest bidder | |
| 5 | L5₹8.0 L+₹67,620 (9.25%)Rejected-Finance VILL SAL PUKHAR P O BATRAN TEHSIL NADAUN DISTT HAMIRPUR H P | CHAMBA | HIMACHAL PRADESH | 176207 | L5 | Rejected-Finance 5th lowest bidder |
Tender Value
₹9.3 L
EMD Value
₹19,000
Closing Date
11 Dec 2023, 5:00 pmClosed
Executive Engineer
HPSIDC Shimla
Providing E.I. work
2023_SIDC_82039_1
Job No. 8
Open Tender
Electrical Works
Item Rate
120 days
Kangra
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,100
₹19,000
19 Feb 2024
1 Dec 2023
12 Dec 2023
1 Dec 2023
11 Dec 2023
1 Dec 2023
Amount
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (i) Group C.
Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (i) Group C.
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. (i) 2x1.5 Sq. mm.
(ii) 2x2.5 Sq. mm.
(iii) 4x4+2x4 Sqmm
(iv) 2x4.0 Sq. mm.
(v) 2x10 Sq. mm.
Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.
Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required. (i) 2 Pair
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- (i) 20 mm. dia
Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:- (i) 2 modules (78mmx78mmx50mm)
(ii) 6 modules(205mmx78mmx50mm)
Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. (i) S.P. 5/ 6 Amps one way Modular switch.
(ii) 5 pin, 5/ 6 Amps Modular socket outlet.
(iii) Telephone socket outlet, Modular.
Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.
Supplying and fixing G.I. Modular box with modular plate and cover in recess including providing and fixing 5Pin6 amp modular socket and 5/6 amp modular switch 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.
supplying and fixing Modular computer board on surface/recess with suitable size inner and outer sheet cover in the front including providing and fixing , modular type switch,3 Nos. 5/6 Amp Switch and 3 Nos. 5 pin 5/6 Amp Socket complete connections, painting etc. as required.
Supplying and fixing bakelite batten/angle holder including connections etc. as required:-
Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- (i) Single pole. Cat-A.
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 63 Amps. Cat-A.
Supplying and fixing following rating, four pole, 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 63 Amps. Cat-A.
Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 63 Amps. Cat-A.
Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 63 Amps. Cat-A.
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- (i) Double door-12 way
Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 8 module incomer, 2 module sub-incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- (i) Double door-2+8 way (8+6+24),horizontal type
Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but with charcoal or coke and salt ) complete as required.
Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required.
Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- (i) 25 Liter capacity water heater (Cat-A)
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Light duty, 300 mm sweep
Exhaust Fan, Heavy duty, 300 mm sweep in/c fan shutter if required
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to required length] with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:Model to be got approved.- (i) Ceiling Fan 1200 mm sweep, Category-A
(ii) Ceiling Fan 1400 mm sweep, Category-A
Supplying and fixing of fancy wall bracket Led/LED Batten of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. (i) Wall Light fixture Polycarbonate body suitable for 9 watt Retro fitt Led Lamp B22 base.
(ii) Mirror light/ Led Batten 10 watt Al housing
Led Batten 20 Watt Al Housing
Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required:-
Supplying and drawing LAN cable CAT 5E, solid copper conductor protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.
Providing & fixing surface/ recess mounted 12/ 15W LED fitting of Syska/Havells/Philips/ Bajaj make as required complete in all respect. (i) 9 Watt
Supplying & fixing SKYLUKS LED surface mounting fitting 1'*1' LED luminaire panel of Bajaj/Havells/Philips/Syska20 / 24WH
Providing & fixing LED panel recessed/surface 4x1 /2x2FTof Bajaj /Syska equivalent to Bajaj /Havell/Syska/Wipro 36W complete in all respect fitting in ceiling as approved & directed by engineer in charge.
Supply, installation, testing & commissioning of 1.5TR(cold) split type air conditioning unit with remote of following make complete as required in all respect with Base Frame , Refrigent copper piping , Hard PVC /Flexible drain pipe, PVC Round Cover 50mm dia upto required length including stabilizer & stand for AC as approved & directed by engineer in charge in/c Modular industrial socket with mcb of required rating. Voltas/,Lloyd,LG, Blue Star 1.5 Ton
2 Ton Capacity
Providing & fixing 45 watt LED street light fitting ln white colour with pressure die- cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection. As per CAT no. BRTFG 30W LED/ White ) complete in all respect.The fitting is to be fixed on bracket mounted on pole/on wall including wiring etcas required as approved and directed by engineer in charge of Bajaj/ Philips/ Havells make.
Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required. (i) 125 Amp. -16 KA
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Model to be got approved from engineer in charge. Ceiling Fan 1200 mm sweep Fusion Metallic Beige Brown /Pearl Ivory-Gold Havells.
AJAY KUMAR GOVT CONT
Rajan Electrical
Harsh Electronics Electrical Contractor
AJINDER THAKUR
M/s Jamwal nxt gen energy solutions
Sourab Kuthiala
AJAY KUMAR GOVT CONTRACTOR
ILLUMINATE MANAGEMENT AND GLOBAL SERVICES PVT LTD
ASHOK KUMAR GOVT CONTRACTOR
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .