RAVAPAR MAIN ROAD IN BONNY PARK DRAINAGE, STROM WATER LINE, WATER LINE, POCKET GARDEN, FOOTPATH AND PLANTATION ETC. WORK OF MORBI MUNICIPAL CORPORATION AREA AT MORBI (2ND ATTEMPT)

NAME OF WORK :- BEAUTIFICATION OF RAVAPAR ROAD MORBI

RECAPITULATION SHEET

Sr No. Description Amount

1 CLEARING,DISMENTALING & EXCAVATION ₹

2 PAVING BLOCK & KERB STONE ₹

3 URBAN FURNITURE ₹

4 GYM EQUIPMENTS ₹

5 CHILDREN PLAY EQUIPMENTS ₹

6 ROAD MARKING ₹

8 TREES & PLANTATION ₹

9 TOILET BLOCK ₹

10 ELECTRICAL WORK ₹

11 OPERATION & MAINTANANCE ₹

MORBI MUNICIPAL CORPORATION

NAME OF WORK :- BEAUTIFICATION OF RAVAPAR ROAD MORBI

Sr No. Description Unit Quantity Rate Amount

CLEARING,DISMENTALING & EXCAVATION

Clearing and grubbing road land including

uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm

removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means

in area of light jungle

Demolition including stacking of serviceable

2 materilas anddisposal of unserviceable materials Cum. 1425.00 ₹ 1,071.63 ₹

with all lead and lift. (i) R.C.C. work

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

All lead and Lift .(C) Hard Murrum

PAVING BLOCK & KERB STONE

Supply & Laying of Black Trap Metal of size 3.8-7 cm

Supply and laying of Black Stone Powder / Dust

Providing and laying cement concrete 1:3:6 (1-

Cement : 3 coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing

6 complete excluding cost of formwork in (A) Cum. 1148.00 ₹ 3,064.60 ₹

Foundation and Plinth

Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm

7 Sand layer for levelling and filling the joint with Sqm. 9800.00 ₹ 699.93 ₹

sand in proper line and level as per guidlines of IRC

: SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250 grade

concret as per approved design and including

excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc

Double coat enemal paint with primer coat

URBAN FURNITURE

Manufacturing, supplying and placing Precast RCC

planter of approved shape and size, made with M30

grade concrete, machine vibrated, wall thickness

minimum 60 mm, with 8 mm dia. steel

reinforcement @ 150 mm c/c both ways, including

two coats acrylic sealer finish, bottom drainage

arrangement with 25 mm dia PVC pipe, internal

10 waterproofing with cement slurry + waterproofing Nos. 200.00 ₹ 11,550.00 ₹

compound, transportation, loading, unloading and

placement in position complete as directed.

Rectangular Size (1500×600×600 mm)

Manufacturing, supplying and placing Precast RCC

planter of approved shape and size, made with M30

grade concrete, machine vibrated, wall thickness

minimum 60 mm, with 8 mm dia. steel

reinforcement @ 150 mm c/c both ways, including

two coats acrylic sealer finish, bottom drainage

arrangement with 25 mm dia PVC pipe, internal

waterproofing with cement slurry + waterproofing

compound, transportation, loading, unloading and

placement in position complete as directed.

Circular Size (Dia. 800 x 600 mm H)

Supplying & filling planter with soil mix (40% garden

soil + 30% organic compost + 30% cocopeat)

12 including delivery, placing & leveling complete. Cum. 143.00 ₹ 4,200.00 ₹

Providing and constructing street-side planter of

size 0.80 m Width, including excavation up to

mm depth; providing PCC 1:4:8 base 75–100 mm

thick; casting RCC M-20 planter edge of 100–150

mm thickness with reinforcement; laying 150 mm

20 mm aggregate drainage layer and 50 mm coarse

sand filter layer; filling horticulture grade garden

soil mixed with 20% vermicompost; supplying and

13 planting one ornamental tree per 3 rm, shrubs @ Rmt. 350.00 ₹ 5,750.00 ₹

3–4 nos per rm and groundcovers to full bed cover;

providing and fixing MS railing made of 25×25 mm

square pipe (height 300–450 mm) coated with

primer and two coats enamel paint; including

watering, finishing and maintenance for 30 days,

complete as directed.

“Providing and constructing cast-in-situ curved RCC

landscape seating with backrest of size approx.

mm seat width × 450 mm seat height × 120 mm

seat slab thickness and 250–300 mm high RCC

backrest (120 mm thick), including site marking,

excavation in all types of soil, preparation of bed

with 100 mm PCC 1:4:8, supplying and fixing

curved/bending-ply formwork for seat and

backrest, placing M-20 grade RCC with Fe-500

reinforcement (as per structural design), proper

vibration for honeycomb-free work, finishing entire

surface in true exposed concrete finish with

approved shutter finish/micro-trowel finish,

formwork removal, edge grinding,

sealing/protective coat, curing, and completing all

works as per drawings and as directed by the

Engineer-in-Charge.”

“Providing, fabricating, supplying and fixing modern

vertical steel garden boundary railing including

excavation for trench 300 mm wide and 450 mm

deep, laying 75 mm PCC 1:4:8, casting RCC

footing/grade beam of size 300 mm (width) ×

mm (depth) in M20 concrete with reinforcement

(10 mm bars & 8 mm stirrups), fixing MS anchor

bolts/base plates; fabrication of railing made from

MS vertical bars 20×20 mm square bar (height

m above finished ground level) spaced 40–60 mm,

with top bent profile as per design, welded to MS

bottom C-channel 75×40 mm and top flat 40×6

mm, including cutting, bending, full welding,

grinding, zinc-rich primer, epoxy primer, and two

coats PU exterior spray paint in gradient shade,

complete with all materials, labour, tools,

transportation and installation as per engineer-in-

charge instructions.”

Providing and Constructing Integrated RCC + MS +

Wooden Bench With Planter of size 2.40 m (L) ×

0.50 m (D) × 0.45 m (H) with planter size 0.60 m ×

0.60 m × 0.45 m depth, including excavation, sand

filling 100 mm , PCC 1:4:8 150 mm , RCC M20

reinforcement, shuttering , planter waterproofing

16 PVC drain, gravel, soil , geotextile, MS tubes Nos. 75.00 ₹ 25,620.00 ₹

50×50×3 mm & 40×40×3 mm , MS flat bar 50×6

mm , wooden planks 20–25 mm thick, SS screws,

finishing , primer + PU paint, complete fabrication,

welding, carpentry, planting, curing, and installation

Providing and fixing modular

foldable/transformable outdoor bench system,

capable of converting into multiple configurations

(bench, dual seat with table, opposite seat, and flat

lounger) made of factory–finished hardwood/WPC

slats of size 70×40 mm, seat slat length 1500 mm,

backrest panels 900 mm height, with 10–12 mm

slat gap, mounted on a heavy-duty frame of

40×40×3 mm MS/SS304 sections including

integrated folding/rotating mechanisms comprising

SS304 pivot hinges, locking pins, guide channels,

and sliding brackets allowing smooth

17 transformation without structural change. The Nos. 50.00 ₹ 15,500.00 ₹

system shall include SS304 tubular supports (Ø

38–50 mm, 2 mm thick), 120×120×10 mm MS/SS

base plates, anti-rust treatment and 80–100 micron

powder coating (for MS), and wood/WPC slats with

exterior UV-resistant PU coating. The bench shall be

installed on site using M10×100 mm SS304

chemical anchor bolts over existing PCC/RCC or on

200×200×300 mm PCC foundation pockets (1:2:4

mix) where required. Complete with all materials,

labour, fittings, tools, testing, alignment, and

finishing as approved by the engineer-in-charge.

Providing and constructing RCC trapezoidal type

speed breaker of overall height 100 mm with

300–400 mm flat top and 900–1000 mm overall

width as per IRC:99, using M20 grade concrete,

including cutting/removal of existing road up to

mm, PCC 1:3:6 bedding 75–100 mm thick, supplying

& placing 8 mm reinforcement at 150 mm c/c (or as

specified), providing and fixing curved shuttering,

placing and finishing concrete, curing, and applying

18 black & yellow thermoplastic road marking paint, Rmt. 264.00 ₹ 2,900.00 ₹

including labour, materials, tools, equipment and

site cleaning complete

H -4’6’’ ,L-3’6’’,W- 2’1’’. Main body structure made

from 3 inch dia . Galvanized steel pipe 4mm thick.

Handle 1/1 .25 inch dia .M.S. pipe. 3.2 mm thick.

19 Aluminum foot rest. Bearings should be of Ea. 1.00 ₹ 25,436.00 ₹

standard quality SKF , Norma , FAG , Tata etc. The

equipment should be Powder coated 100-110

DOUBLE TWISTER STANDING :

H -4’3’’,L-5’7’’,W- 2’3’’. Main body structure made

from 4 inch dia . Galvanized steel pipe 4.5mm

thick. Handle 1/1 .25 inch dia .M.S. pipe. 3.2 mm

20 thick. Bearings should be of standard quality SKF , Ea. 1.00 ₹ 21,598.00 ₹

Norma , FAG , Tata etc. The equipment should be

Powder coated 100-110 micron..

LEG PRESS TRIPLE :-

H -5’8’’ ,L-6’4’’,W- 6’2”. Main body structure made

from 4 inch dia . Galvanized steel pipe 4.5mm

thick. Handle 1/1 .25 inch dia .M.S. pipe. 3.2 mm

21 thick. Bearings should be of standard quality SKF , Ea. 1.00 ₹ 37,244.00 ₹

Norma , FAG , Tata etc. Alluminium foot rest, FRP

seat of 5mm thick. The equipment should be

Powder coated 100-110 micron.

SEATED PULLER DOUBLE :-

H -6’8’’ ,L-7’,W- 3’4’’. Main body structure made

from 4 inch dia . Galvanized steel pipe 4.5mm

thick. Handle 1/1 .25 inch dia .M.S. pipe. 3.2 mm

thick. FRP seat 5 mm thick. The bearings should be

of standard quality SKF , Norma , FAG , Tata etc. The

should be Powder coated 100-110 micron. .

CHEST PRESS DOUBLE :-

H -6’8’’ ,L-5’5’’,W- 2’3’’. Main body structure made

from 4 dia . Galvanized steel pipe 4.5mm thick.

Handle 1/1 .25 inch dia .M.S. pipe. 3.2 mm thick.

FRP seat 5 mm thick. The bearings should be of

standard quality SKF , Norma , FAG , Tata etc. The

equipment should be Powder coated 100-110

CHILDREN PLAY EQUIPMENTS

FOUR SEATER (MGR) MERRY GO ROUND

Height minimum 0.80 m to 0.90m

Seat 3.0 mm thick Pipe With steel ase

slide handle 150 mm NB e.

Footrest 20 mm NB e.

Bearing dual heavy duty bearing permanently

lubricated and with Water sealant.

HALF ROUND NET SCRAMBLER

Area 3.3M X 1.7M

SAFE ARER 4.5M X 3.0m

The total structure of the half round net is made

form 40 NB MS pipes with ‘U’ hooks welded to it.

25 The rope used is nylon rope of 18 mm dia. The Ea. 1.00 ₹ 46,700.00 ₹

straight net keeps its net integrated with the help

of specially designed nylon ropes. There are

specially designed nylon rope clamps used which

has rope integrated inside which hold it tightly and

avoids breaking

STANDARD SEE-SAW (single)

Area 2.00 to 2.20 m x 1.00 to 1.20 m

Height 0.50 to 0.55 m.

Lever ID-39 MM,OD 50 mm MS pipe

Top Bar ID19 mm,OD 25 mm MS pipe

Stand ‘’V’’ shape ID 32 mm, OD 40 mm MS pipe

Seat 3 mm thk.FRP Fiber reinforced Plastics with

Bearing Heavy duty bush bearing .

TRIPLE SWINGS (Specification)

Height 2.20 to 2.30 m.

Leg Support 50 mm N.B. MS pipe

Seat Minimum Minimum 5 mm thickness, FRP, non-

Skied designed Top. & seat three

Suspension Minimum MS lined steel

Bearing Housing ring is Minimum of 4 MM MS steel

With dual ZZ Bearing

27 Housing ring and Swing pipes joint with 6 mm Ea. 1.00 ₹ 21,837.00 ₹

Heavy MS clamp And fitted with appropriate Nut

AREA 6.5 to 6.6 m x 0.5m to 0.7m

Safe Area 7.5m to 7.7m x 1.5m to 1.7m

Material Specification

The wave slide is made up of fiber reinforced plastic

(FRP) in one piece having shell thickness of 3-4

mm. the slide is supported on a center support of

80 NB MS pipe .The landing supports of the slide

are supported by two 20 NB MS pipes. The slide

ladder is made up of 25 NB MS pipe. The wave slide

railing is made up of 15 NB MS pipe and 20 NB MS

pipes respectively. The

triangular steps of the ladder are made up of

SWG MS sheets. The safety railing of the ladder is

made up 20 NB MS pipe.All the sharp edges and

comers are properly grinded to give smooth finish

so that children are not hurt while playing on it.

Shape Monkey,Rabbit& Other shapes.

29 Height Minimum 1.10 m Ea. 15.00 ₹ 9,150.00 ₹

Capacity 82. to 85 ltr. Fiber Body

Thickness 2.50 to 3 mm.

Road marking with hot applied thermoplastic paints

with reflectorising glass beads on bitumin surface

providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising

glass beads @ 250gms per sqm area, thickness of

2.5mm is excluding of surface applied glass beds as

per IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra

patta /bump patta lane/center line/ edge line/cut

patta. The white color marking should provide

liminance coefficinet on cemend road shalll be min

130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day

30 time. The marking should meet the performance Sqm. 2235.00 ₹ 364.08 ₹

criteria for night time reflectivity, wet reflectivity

and skid resistance as mentioned in the section-15

of IRC 35-2015. Warranty for the Retro reflectivity

should be two years.

Cat Eye / Road Stud / RPM: Supplying of Molded

Twin Shanks Raised Pavement Markers made of

polycarbonate and ABS moulded body and

reflective panels with micro prismatic lens capable

of providing total internal reflection of the light

entering the lens face and shall support a load of

13635 kgs. tested in accordance to ASTM D

Type H and complying to Specifications of Category

A of MORTH Circular No RW/NH/33023/10-97 DO

III Dt 11.06. 1997. The height, width and length

shall not exceed 20 mm, 130 mm and 130 mm and

with minimum reflective area of 13 Sqcm on each

side and the slope to the base shall be 35 +/-

31 degree. The strength of detachment of the Ea. 2400.00 ₹ 323.00 ₹

integrated cylindrical shanks, (of diameter not less

than 19 +/- 2 mm and height not less than 30+/-

mm) from the body is to be a minimum value of

Kgf. Fixing will be by drilling holes on the road for

the shanks to go inside, without nails and using

epoxy resin based adhesive as per manufacturers

recommendation and The color of the marker

should be as per the IRC 35-2015 and as directed by

Engineer-in-charge.

Cautionary Warning Sign :-Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 90 x 90 x

cms. equilateral triangle as per design of IRC-67-

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ; reflectorised

with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted

32 with bestquality epoxy coatings in black and white Nos. 40.00 ₹ 3,867.51 ₹

bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x

x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting

Facility Informatory Sign :-Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 80 x 60 cms.

rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted

33 with bestquality epoxy coatings in black and white Nos. 40.00 ₹ 3,951.13 ₹

bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x

x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting.

Regulatory / Mandatory Sign :-Providing and fixing

sign boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum composite Panel); size

cms. Dia Circle as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted

34 with bestquality epoxy coatings in black and white Nos. 40.00 ₹ 3,505.07 ₹

bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x

x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from

original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test

lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective

STOP Sign :-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 90 cms.

Octagonal as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated

with one coat of epoxy primer and two coats of

best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with

35 bestquality epoxy coatings in black and white Nos. 30.00 ₹ 6,637.98 ₹

bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x

x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting.

Parking Sign :-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size size 60 x 60cms.

sequare plus 60 x 20cms rectangular additional

plate as as per the design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from

36 suitable size iron angle of 35 x 35 x 3mm; painted Nos. 30.00 ₹ 4,351.31 ₹

with bestquality epoxy coatings in black and white

bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x

x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting.

Direction (Junction) Sign :-Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 244x122

cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 4.0mtr (2 Nos.)

long stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 50x50x5mm;

37 painted with bestquality epoxy coatings in black Nos. 5.00 ₹ 21,076.74 ₹

and white bends. The details of symbol for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for

the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective

Distance Informatory / Destination Sign : Providing

and fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite Panel); size

180x120 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ; reflectorised

with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 4.0mtr (2 Nos.)

long stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm;

38 painted with bestquality epoxy coatings in black Nos. 5.00 ₹ 18,073.46 ₹

and white bends. The details of symbol for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for

the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective

Place Identification Sign :-Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 150x90 cms.

rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 4.0mtr (2 Nos.)

long stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm;

39 painted with bestquality epoxy coatings in black Nos. 5.00 ₹ 12,219.33 ₹

and white bends. The details of symbol for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for

the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective

Village name/ Bump Ahed sign :-Providing and

fixing sing boards made out of 2mm aluminium

sheet; size 90 x 60cms. rectangle as as per the

design of IRC-67-1977 pre treated with

phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best

quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as

per IRC-30-1968, 3.1m long (2 nos) stand post and

40 frame fabricated from suitable size iron angle of 50 Nos. 15.00 ₹ 4,995.41 ₹

x 50 x 5mm painted with best quality epoxy

coatings in black and white bends. the details of

symbol or inscription / numerals for each board

shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC block of size

x 45 x 60cms. for each leg. including excavation

curing etc. complete under the supervision of

engineer in charge.(A) Engineer Grade(VR)...

Hazard Marker Sign :-Providing and fixing sign

boards made out of 2.0 mm aluminium sheet /

mm ACP (Aluminum composite Panel); size 90x30

cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 1.8mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted

41 with bestquality epoxy coatings in black and white Nos. 40.00 ₹ 3,483.85 ₹

bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x

x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting

Men at work (Folding) sign :-Providing and fixing

sign boards made out of 2.0 mm aluminium sheet /

4 mm ACP (Aluminum composite Panel); size

60x60x60cm equilateral Triangular as per design of

IRC-67-2012. Pre treated with phospheting process

& acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade

retro refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 3.3 mtr long

stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35x35x3mm;

painted with bestquality epoxy coatings in black

and white bends. the details of symbol or

inscription / numerals for each board shall be as per

the instruction of engineer in charge. A warranty

for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test

lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective

Four/Two lane Ahed sign :-Providing & Fixing sign

boards made out of 2mm aluminium sheet, size

x 120 cms square plus 120 x 60cms additional plate

as per the attached drawing pre treated with

phosphetingg process & acid etching. coated with

one coat of epoxy priemr and two coats of best

quality epoxy paint reflectorised with retro sheeting

as per latest M.O.S.T. Specifications; Letters and

numerals should be as per IRC-30-1968,3.1m long

43 (2nos) stand post and frame fabricated either from Nos. 10.00 ₹ 11,380.51 ₹

iron angle of 50x50x5mm, 75x75x6mm as required,

painted with best quality epoxy coating in black and

white bends The fixing at site shall be in 1:2:4 CC

block of size 45 x 45x 60cms for each leg, including

excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineer

Diversion sing board :-Providing & Fixing sign

boards made out of 2mm aluminium sheet, size

x 60 cms. rectangle as per the attached drawing pre

treated with phospheting process & acid etching.

coated with one coat of epoxy priemr and two

coats of best quality epoxy paint reflectorised with

retro reflective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as

per IRC-30-1968,3.1m long (2nos) stand post and

frame fabricated from iron angle of 35x35x3mm,

50x50x5mm painted with best quality epoxy

coatings in blak and white bends. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45x 60cms for

each leg, including excavation curing etc. complete

under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

TREES & PLANTATION

Providing and laying Doob Grass (Bermuda /

Cynodon Dactylon) lawn in prepared beds including

removal of stones and weeds, fine dressing of soil

surface, application of soil mix (local red soil + river

sand + organic manure in 2:1:1), laying of grass turf

45 in compact patches, rolling, watering, stabilization Sqm 1700.00 ₹ 105.00 ₹

and maintenance for 30 days complete as directed.

Supplying and planting Neem Tree (Azadirachta

indica) of height 6 to 8 feet with healthy root ball,

including excavation of pit 2’ x 2’ x 2’, refilling with

good quality red soil and organic manure (2:1

ratio), application of neem cake and NPK, proper

watering at the time of planting, providing bamboo

46 stake support, and maintenance for 30 days Nos. 70.00 ₹ 950.00 ₹

complete as per direction of Engineer-in-Charge.

Supplying and planting Rhoeo Spathacea (Oyster

Plant) of healthy nursery-grown stock including

excavation of planting bed to a depth of 150 mm to

200 mm, removing debris and weeds, refilling with

screened garden soil mixed with organic manure in

2:1 ratio, levelling and preparing bed, planting at

9"–12" spacing, application of neem cake, proper

watering at the time of planting, and maintenance

for 30 days (including regular watering and plant

survival replacement), complete as directed by

Engineer-in-charge.

Supplying and planting Chlorophytum Variegatum

ground cover plants of healthy nursery grown stock,

including excavation of planting bed to a depth of

150–200 mm, removal of weeds and debris,

refilling the bed with screened garden soil mixed

with organic manure in 2:1 ratio, leveling and bed

48 preparation, application of neem cake, planting at Sqm 300.00 ₹ 750.00 ₹

9" spacing, proper watering at the time of planting,

and maintenance for 30 days including watering

and replacement of dead plants as required,

complete as directed by Engineer-in-Charge.

Supplying and planting Lemon Grass (Cymbopogon

citratus) of healthy nursery-grown stock, including

excavation of planting bed to 200 mm depth,

removal of debris and weeds, refilling with garden

soil mixed with organic manure in 2:1 ratio,

49 applying neem cake, planting at 1 ft spacing, proper Sqm 230.00 ₹ 550.00 ₹

watering at the time of planting, staking where

necessary, and maintenance for 30 days (including

watering and plant replacement), complete as

directed by Engineer-in-Charge.

Supplying and planting Strelitzia nicolai 4-6 ft

including excavation of planting pit as required,

refilling with garden soil and organic manure (2:1),

50 neem cake application, watering, and 30 days Nos. 120.00 ₹ 1,020.00 ₹

maintenance complete as directed by Engineer-in-

Supplying and planting Dypsis lutescens (Areca

Palm) 4-5 ft including excavation of planting pit as

required, refilling with garden soil and organic

51 manure (2:1), neem cake application, watering, and Nos. 120.00 ₹ 700.00 ₹

30 days maintenance complete as directed by

Engineer-in-Charge.

Supplying and planting Monstera deliciosa 2-3 ft

including excavation of planting pit as required,

refilling with garden soil and organic manure (2:1),

52 neem cake application, watering, and 30 days Nos. 120.00 ₹ 600.00 ₹

maintenance complete as directed by Engineer-in-

Supplying and planting Philodendron Xanadu 1.5-2

ft including excavation of planting pit as required,

refilling with garden soil and organic manure (2:1),

53 neem cake application, watering, and 30 days Nos. 120.00 ₹ 350.00 ₹

maintenance complete as directed by Engineer-in-

Supplying and planting Alocasia macrorrhiza 2-3 ft

including excavation of planting pit as required,

refilling with garden soil and organic manure (2:1),

54 neem cake application, watering, and 30 days Nos. 120.00 ₹ 320.00 ₹

maintenance complete as directed by Engineer-in-

Supplying and planting Calathea ornata 1-1.5 ft

including excavation of planting pit as required,

refilling with garden soil and organic manure (2:1),

neem cake application, watering, and 30 days

maintenance complete as directed by Engineer-in-

Supplying and planting Nephrolepis Duffii (Fern) 6-

8" pot including excavation of planting pit as

required, refilling with garden soil and organic

56 manure (2:1), neem cake application, watering, and Nos. 120.00 ₹ 120.00 ₹

30 days maintenance complete as directed by

Engineer-in-Charge.

Rain Tree — Samanea saman (2.0–2.5 m)Providing

and planting Rain Tree sapling 2.0–2.5 m height

57 with strong stem, proper pit preparation, soil mix, Nos. 80.00 ₹ 700.00 ₹

mulching, staking and establishment care.

Gulmohar / Flame of the Forest — Delonix regia

(1.5–2.0 m) Supplying Gulmohar sapling 1.5–2.0 m

58 height, straight stem, healthy foliage, planting in Nos. 80.00 ₹ 450.00 ₹

prepared pit with compost, mulching, staking and

Yellow Flame — Peltophorum (1.5–2.0 m) Supplying

and planting Yellow Flame sapling 1.5–2.0 m height,

59 strong rootball, pit preparation with manure, Nos. 80.00 ₹ 550.00 ₹

proper staking, mulching, watering and

Jamun — Syzygium cumini (1.5–2.0 m) Providing

Jamun sapling 1.5–2.0 m height, well-rooted and

60 healthy, planting in prepared pits with compost, Nos. 80.00 ₹ 1,000.00 ₹

mulching, staking, watering and one-year

Shrubs (Hibiscus, Bougainvillea, Murraya mixed —

0.5–1.0 m pot) Providing shrubs 0.5–1.0 m height in

pots, mixed Hibiscus/Bougainvillea/Murraya

varieties, planting in beds with compost, mulching,

watering and care.

limbers (Bougainvillea climber for entrance &

pergola — rooted cuttings/pots) Supplying

Bougainvillea rooted cuttings in pots, healthy

62 foliage and roots, planting at pergolas/entrances Nos. 60.00 ₹ 220.00 ₹

with soil mix, staking, watering and proper

Duranta — Duranta repens (0.6–1.0 m pot)

Supplying Duranta shrub 0.6–1.0 m height in pots,

planting with soil mix and compost, mulching,

63 watering and regular maintenance. Nos. 180.00 ₹ 250.00 ₹

Providing and planting groundcover plants such as

Dwarf Chlorophytum / Alternanthera / Wedelia

including shallow pit preparation 150×150×150

64 mm, refilling with red soil + compost mix, planting, Nos. 300.00 ₹ 80.00 ₹

spacing, watering and maintenance for 30 days,

complete as directed.

Providing and planting medium height shrubs such

as Acalypha / Croton / Heliconia (height 1–3 ft),

including pit excavation of 300×300×300 mm,

disposal of excess soil, soil preparation with red soil

+ sand + organic compost (2:1:1), placing, watering,

trimming and 30 days maintenance, complete as

Providing and planting tall background plants such

as Areca Palm / Song of India / Foxtail (height 4–7

ft), including pit excavation of 450×450×450 mm,

disposal of excess soil, refilling with red soil + sand

+ organic compost (2:1:1), planting, watering,

mulching and maintenance for 30 days, complete

Excavation of Foundation in Soft Murrum, Soil or

Sand from 0.0 mtr. to 1.50 mtr depth including

dewatering with lifting and laying

in RMC limit as instructed

Filling of Plinth in layers of 0.23 m thick including

murrum and sprinkling of water, compaction etc.

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

69 aggregates 20 mm nominal size) and curing Cum 2.00 ₹ 3,720.97 ₹

complete excluding cost of formwork in (A)

Foundation and Plinth.

CC work M-25 for RCC footing using aggregate of

size 10-20 mm, centring, curing, finishing etc.

70 complete (without reinforcement ) Cum 2.00 ₹ 5,620.00 ₹

CC work M-25 for Column using aggregate of size

10-20 mm, centring, curing, finishing etc. complete

(without reinforcement)

CC work M-25 for Beam using aggregate of size 10-

20 mm, centring, curing, finishing etc. complete

72 (without reinforcement) Cum 2.00 ₹ 6,250.00 ₹

CC work M-25 for Coping using aggregate of size 10-

20 mm, centring, curing, finishing etc. complete

73 (without reinforcement) Cum 1.00 ₹ 5,550.00 ₹

CC work M-25 for Chhajja using aggregate of size

10-20 mm, centring, curing, finishing etc. complete

74 (without reinforcement) Cum 1.00 ₹ 5,950.00 ₹

CC work M-25 for Lintelusing aggregate of size 10-

20 mm, centring, curing, finishing etc. complete

75 (without reinforcement) Cum 1.00 ₹ 6,000.00 ₹

Brick Masonry work in Cement:Mortar 1:6

CC work M25 for RCC slab using aggregate of size

10-20 mm, centring, curing, finishing etc. complete

77 (without reinforcement) Cum 3.00 ₹ 6,150.00 ₹

Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in

78 position complete upto floor two level Kg 904.00 ₹ 76.52 ₹

Cement Plaster 12 mm thick using Cement:Mortar

in proportion 1:3 with Niru Finishing curing, etc.

20mm thick Sand Face Cement Plaster Work in

which 1 paster in proportion of 1:3 and 2nd plaster

inteh proportion of 1:2 using Cement:Mortar with

80 spong finishing etc. complete (Note: Before Sqm 63.00 ₹ 263.00 ₹

carringout Plaster work on RCC, required tipping

carried out as instructed)

Supply & Fixing of Glazed tiles (1st Quality) of

required size in Cement Roga and joints to be filled

81 with white cement after 12mm rough plaster in Sqm 55.00 ₹ 493.00 ₹

proportion of 1:3

Supply & fixing of Vitrified flooring work (1st

Providing & fixing FRP door.

Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

Supply & Fixing of Granite Stone wall after rough

cast Cement Plaster in proportion of 1:3 and fixing

grainage in Cement Paste

Apex Color work on Outer side of Wall (Two coats)

(with Base Coat)

Plastic Imulsion Paint (Two coats) (Asian Paint, ICI,

Dulux, Nerolac, Berger etc. of approved type) (with

Providing and fixing in position cowel went to

pipes.(C) 100mm dia

Providing and fixing cast iron (Spun) Nahni trap of

thefollowing nominal diameter of self cleaning

design with C.I.screaed down or higned grating

including cost of cuttingand making good the walls

and floor 100mm inlet and 50mm outlet.(C) 100mm

Providing and fixing wsh down water closet

(European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

90 Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover Each 2.00 ₹ 1,346.38 ₹

to be measured and paid for

separately)(A) vitreous China Pattern :(i) in white

Providing and fixing 100mm sand cast iron grating

for gully, floor or Nahni trap.

Providing and fixing 600mm x 450mm bevelled

edgemirrror of superior glass mounted on 6mm

92 thick A.C. sheetor plywood sheet and fixing to Each 2.00 ₹ 850.90 ₹

wooden pluge with C.P.brass screws and washers.

Providing and fixing C.P. brass towel rail comlete

with C.P.brass brackets fixed to wooden plugs with

C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing toilet paper holder.(A) C.P.

Providing and fixing screw down bib taps of

95 followingsize.(A) Brass screw down bib tap polished Each 5.00 ₹ 212.68 ₹

bright. (ii) 20mm dia.

Providing and fixing screw down bib taps of

96 followingsize.(A) Brass screw down bib tap polished Each 5.00 ₹ 184.98 ₹

bright. (i) 15mmdia.

Providing and fixing pillar tap, capstan head, screw

97 downhigh pressure with screws, shanks and back Each 3.00 ₹ 351.18 ₹

nuts. (ii) 20mm dia.

Providing and fixing brass screw down stop tap.(B)

Providing and fixing Gun metal check or non-return

fullway wheel valve.(B) 20mm dia.

Providing and fixing Gun metal check or non-return

fullway wheel valve.(C) 25mm dia

Providing and fixing Gun metal check or non-return

fullway wheel valve.(D) 32mm dia.

Providing and fixing chromium plated brass half

trun flushcock of approved quality including fixing

102 in pipe line etc. complete.(i) 20mm dia. Each 2.00 ₹ 252.26 ₹

Providing and fixing chromium plated brass half

trun flushcock of approved quality including fixing

103 in pipe line etc. complete.(ii) 25mm dia. Each 2.00 ₹ 261.16 ₹

Providing and fixing Urinal or approved quality

includingconecting the Urinal with waste pipe , tap

104 etc. complete.(A)White earthenware flat back or Each 4.00 ₹ 1,064.22 ₹

corner type size 430mm x260mm x 350mm.

Providing and fixing washbasin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

but excluding fittings.(A) Vitreous China:(ii) Flat

Back washbasin 550 mm x v 400mm size. (i) In

Providing and fixing ball cock of approved. quality

106 as directed.(A) Copper Metal (i) 25mm dia. Each 2.00 ₹ 131.57 ₹

Providing laying and jointing in true line and level

15mmdia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

107 concealed as directe including necessary fittings Rmt 75.00 ₹ 71.93 ₹

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level

32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

109 concealed as directed including necessary fittings Rmt 50.00 ₹ 117.97 ₹

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level

110mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

112 concealed as directed including necessary fittings Rmt 50.00 ₹ 868.22 ₹

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level

160mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

113 etc. including testing of pipe and joints and fixing Rmt 50.00 ₹ 826.12 ₹

the same with adhesive solvent, including cost of all

Providing laying (to level or slopes) and jointing

reinforced concrete Light duty non-pressure pipes

I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar joints

114 including testing of joints complete.(D) 300mm Rmt 30.00 ₹ 671.31 ₹

Providing erecting and fixing double coated ISI

water tankof required capacity each with all

necessary fittings and connection etc. complete on

Providing and fixing S.W. gully trap with C.I. grating

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

116 standard weight.(i) Square mouth traps.(B) 150mm Each 5.00 ₹ 1,234.57 ₹

x 100mm size P or R type

Constructing Manhole with R.C.C. top slab in 1:2:4

mix (1 cement :2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1-cement : 3 coarse sand :6-Brick bats

+ 50mm size) inside plastering 15mm thick with

Cement Mortar 1:3 (1-Cement : 3-coarse sand)

finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-

Cement :2 Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete including

curing and festing (i) Inside size 900mm x 1200mm

117 and 1.5M. deep including C.I. cover with frame size Each 2.00 ₹ 19,158.05 ₹

560mm diameter total weight of cover and frame

to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.)(A) With 230mm thick walls of

brick msonry using brick having crushing strength

not less than 35Kg. / Sq.cm. in Cement Mortar 1:5

(1- Cement: 5-Coarse sand) (2) B type depth

Metre for 150mm diameter sewer.

ELECTRICAL WORK

Providing, supplying, transporting,erecting, testing

and commissioning 5.0 metre high decorative LED

pole light complete in all respects, made from GI

tubular pole (114mm OD bottom section–2.0m &

76mm OD top section–3.0 m ) with PP powder

coated finish, fitted with aluminium post-top LED

luminaire of 500 mm diameter,equipped with

Watt LED module using high-efficiency LED chips

and electronic driver, including base plate

200×200×8mmthick, 600 mm long 12mm dia J type

foundation bolts with nuts & washers, internal

wiring with MCB and connector strip, complete

installation, alignment, electrical connections,

testing and commissioning at site, including all

materials, labour, tools, tacklesand incidentals,as

directed by Engineer-in-Charge.

(b) LED Bollard fittings of minimum height 600 mm

& dia.100mm having polycarbonate clear/milky

diffuser mounted on 3mm thick aluminium finished

powder coated pipe with base plate 160x160mm

119 with erection by M8x75mm fastner with required Ea 100.00 ₹ 3,130.00 ₹

RCC foundation.IP65 for 9 to 20 watt ,surge-4kv-

Providing and erecting iron clad cable route marker

duly marked with ELE.CABLE of size 23 cm.X 12 cm.

Flushed with ground in cement foundation as

directed by Engineer in charge.

Supplying and erecting B class Galvanized iron pipe

having smooth finished bore of the pipe on both

ends erected nuts and bolts along the pole / wall

121 shaping the pipe as per site requirement. Pipe dia Mtr. 440.00 ₹ 179.00 ₹

as following.(a) 25 mm dia

Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also

122 comprised permanent ON/OFF switching. Ea 160.00 ₹ 3,137.00 ₹

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover

erected as required with necessary connection

erected as directed.

Smart 4G Timer, Supply of IoT based 4G Smart

Streetlight Control & Monitoring System having a

Smart Panel comprising of 3 Phase IoT Streetlight

Smart 4G Timer with 16x2 LCD to display RSSI, relay

status, RTC time & diagnostics., Controller works on

3-phase & also on any available 1-Phase., Controller

with 8-hour battery backup during external power

failure. External power failure alert immediately to

cloud., 110-630 V AC @ 50-60 Hz – 3 phase

operating range., Standby power consumption

<3W., Smart 4G Timer with RS232 port for DLMS

Energy meter., Smart 4G Timer must be compatible

with any make / brand of DLMS (RS232) Energy

Meter., DI: 4 Nos. (3 Contactor / Latch detection,

for Door Sensor.)., DO: 3 Relays for Independent

control each phase (R, Y, B) with 1 extra spare

relay., Smart 4G Timer with dual SIM functionality

for connectivity backup., 4G M2M SIM 3-Year

communication included., Local configuration via

WiFi / BLE for maintenance or during force

majeure., GPS chip inbuilt of Smart 4G Timer for

auto location tracking & astronomic schedule

location.,50 programmable schedules., Astronomic

scheduling with monthly offsets., Smart 4G Timer

has inbuilt timer stores schedules locally & also

stores schedule execution logs locally, syncs to

cloud whenever connected to cloud., Auto-

scheduler overrides manual operations.,

Accelerometer for tamper & panel movement

detection & alerts., Smart 4G Timer must be tested

from an NABL Lab for Surge Test @ 6 KV (IEC 61000-

4-5), ESD Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV

(IEC 61000-4-4), Conducted Emission @ 150 KHz-30

MHz (CISPR11), Damp Heat Test (40 Deg C @ 95%

RH) 2 cycles of 12+12 hours (IS: 9000 (Part

5/Sec.2):1981 latest) with all test passing criteria as

“Temporary degradation or loss of function or

performance which is self-recoverable”., FOTA

functionality required for upgrades., Smart 4G

Timer sends & stores online/offline data of

controller & load for lamp burn hours analysis.,

It stores & syncs connectivity logs for configuration

of network connections & analytics., PANEL &

SWITCHGEAR, The panel includes a Class 1 DLMS

energy meter NABL approved with 1-2 months of

stored data of daily, hourly, monthly, load survey,

instantaneous, events, tamper data & with power

events stored in meter memory for audit purpose.,

Must monitor V, I, KWH, KVA, PF, KVAH, etc., Panel

made with 2 mm CRCA sheet with ground

mountable stand complete with gland plate,

waterproof glands, earthing bolt., IP55,

weatherproof panel with RAL7035 powder-coated.,

Smart 4G Timer must be fitted on removable

123 terminal sockets for easy maintenance., Switchgear Ea 2.00 ₹ 99,433.00 ₹

includes 3 Nos. 3 pole Contactor / Latch having

minimum 50 A Load carrying capacity per phase, all

other switchgear & wires: 40 A load carrying

capacity., 1 Nos. 4P MCB 10 kA for Incomer &

Nos. 1P MCBs 10 kA for Outgoing., Phase-Wise

Bypass MCBs required., 4P RCCB 100 mA., door

sensor. Also, provide lock & key facility., Panel

mount outdoor antenna for GSM, GPS., Canopy

design for draining down water., CCMS SMART

SOFTWARE, OAuth 2.0 APIs for sending data to

Government clouds/software, etc., CCMS Web

dashboard with secure password & OTP login.,

Hosted on trusted cloud, data security, antivirus &

attack protection., HTTPS., AES256-bit encryption.,

Supply of Smart Streetlight Control & Monitoring

System having an Individual Streetlight

Controller(iSLC) for control, monitoring, & fault

detection of each streetlight., Equipped with a 32-

bit CPU., Operates on 90V to 600 V AC., Has

output for 0%-100% dimming & compatible with 0-

10 V LED dimmable driver., Individual streetlight

Cloud software-based dimming, scheduled dimming

& motion-based dimming for each streetlight., ISLC

with in-built Microwave Motion Sensor. Motion

sensor based adaptive dimming facility to turn

100% in streetlights ahead when vehicle/pedestrian

approaches. It must be cloud-based settable to set

number of ahead streetlights to be brightened.,

Microwave Motion sensor detection range upto

m., Synchronized with other zones streetlight mesh

networks via roaming trigger., User-adjustable

dimming intensity., iSLC must be tested from an

NABL Lab for Surge Test @ 6 KV (IEC 61000-4-5),

ESD Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV (IEC

61000-4-4), Conducted Emission @ 150 KHz-30

MHz (CISPR11), Cold Test (-10 deg C) for 4 hours IS:

9000 (Part 2/Secc.4):1977 latest, Damp Heat Test

(40 Deg C @ 95% RH) 2 cycles of 12+12 hours (IS:

9000 (Part 5/Sec.2):1981 latest), Ingress Protection

for IP65 as per IEC 60529 with all test passing

criteria as “Temporary degradation or loss of

CCMS Web or performance which

dashboard with is self-

secure password & OTP

login., iSLC software must integrate with Group

Controller or operate on a common platform.,

Hosted on trusted cloud, data security, antivirus &

attack protection., HTTPS., AES256-bit encryption.,

Vulnerability Assessment and Penetration Testing

(VAPT) certificate for CCMS Software., Streetlight

management software for load status, live analytics

& reports., Energy meter data (kW, kWh, PF, I, V,

etc.) available., Utility data reconciliation & Class

accuracy reports for billing., Energy monitoring &

auditing for streetlight infrastructure., Fault

detection & alerts., Customizable CCMS Software.,

124 WhatsApp integration, SMS & Email Alerts., Ea 35.00 ₹ 10,100.00 ₹

Hierarchy-wise reporting & alerts., GIS mapping of

live connected streetlight control panels &

streetlights., OTA updates., Smartphone app with

local configuration & navigation., Monitoring &

reporting of lighting parameters., Work permits,

media attachments for site photos etc. per Feeder

Panel for remote verification., Asset management

module for streetlight infrastructure data & GIS

mapping., Complaint/service management with

history & escalation must be available., Includes

years of data hosting, communication, & cloud

services with CCMS Web Dashboard.,

CABLES AND WIRES

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of

cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following

size of cables. (E) 3 & 1/2 core 120 Sq. mm

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following

size of cables.(C) 3 & 1/2 core 70 Sq. mm

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (E) 70 Sq.mm.

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (G) 120 Sq.mm.

Making trench in soft soil of suitable width of 90 cm

deep for laying cable or locating the fault all over

the run and back filling the same and making the

surface as normal ground.

Providing & laying approved make Double walled

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material

131 at required depth in existing trench for laying of Mtr. 3000.00 ₹ 62.00 ₹

cable. below ground / road surface for enclosing

cable (A)50 mm outer dia.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

(A) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

(A) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

(A) 4 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe at road crossing or floor

of following size of cable.

(A) 3 core 2.5Sq. Mm

Providing & laying approved make Double walled

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material

at required depth in existing trench for laying of

cable. below ground / road surface for enclosing

cable (D)120 mm outer dia.

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200- 250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B)

137 Inner chemical (CCM Compound)- Resistivity:- 0.2 • Ea. 5.00 ₹ 10,489.00 ₹

/ meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retainmoisture for

long time Necessary test report must be

submitted.(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like

Automation, SCADA) i.e independent (c) For

Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation,

SCADA) i.e independent Earthing in normal soil.

Providing and :erecting

filling Compound

150 cms.long and 2.5 cms. dia. galvanised iron pipe

with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth

wire. - to be used for each Street Light

For using salt and charcoal / coke as required for

pipe type earthing.

Providing one bag of 25 Kg. Additional Back Filling

Compound (BFC) suitable for safe earthing device.

Providing and erecting required size Copper strip

for earthing of H.T. OCB / ACB/ Transformer, LT

panel board, Motors etc. using copper clamp.

OPERATION & MAINTANANCE

2 Year O&M Cost - The 3-Year Operation &

Maintenance (O&M) Cost shall cover all activities

required to ensure smooth, efficient, and

uninterrupted functioning of the facility. It includes

manpower deployment for routine monitoring,

preventive and corrective maintenance of civil,

electrical, plumbing, irrigation, and landscaping

works. Costs shall account for consumables,

lubricants, spare parts, tools, safety gear, utilities,

and housekeeping. Periodic servicing of pumps,

motors, lighting, panels, and other equipment shall

be included along with waste management and

horticulture upkeep. also cover inspections, minor

repairs, statutory compliances, record keeping,

emergency response arrangements, and reporting

over the full three-year period.