Construction of Anganwadi at Bhalchher EDC Village, Bhalchher Beat, Devaliya Round, in Devaliya Range, of Gir (WEST) Division, Junagadh.

Name Of Work : Construction of Anganwadi at Bhalchher EDC Village, Bhalchher Beat, Devaliya

Round, in Devaliya Range, of Gir (WEST) Division, Junagadh.

ITEM QTY for ITEM DESCRIPTION RATE PER AMOUNT

1 29.75 Excavation for foundation upto 1.5M Depth 269.87 CuM

inlcuding sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50M Lead. (B) Dense or Hard Soil.

2 8.78 Excavation for foundation upto 1.5 to 3.00M 292.18 CuM

Depth inlcuding sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50M Lead. (B) Dense or Hard Soil.

3 9.11 Providing and laying cement concrete 1:4:8 (1- 2862.13 CuM

Cement, 4-Coarse sand, 8-Crushed stone

aggregates 40mm nominal size) and curing

complete excluding the cost of formwork in (A)

Foundation and Plinth.

4 32.13 White stone bela masonary block in course in 6164.58 CuM

Foundation/Plinth with stone of approved quality

in Cement Mortar 1:5 (1-Cement, 5-Coarse sand)

including packing the joints etc.

5 2.24 Providing and laying Cement Concrete 1 : 2 : 4 3767.61 CuM

( 1 Cement : 2 Coarse Sand : 4 Graded Stone

Aggregate 20 mm nominal size ) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth.

6 11.57 Providing formwork of ordinary timber 339.31 SqM

planking so as to give a rough finish including

centering, shuttering, strutting and propping

etc. height of propping and shuttering below

supporting floor to celling not exceeding 4 M

and removal of the same for in situ

reinforced concrete and plain concrete work

in (B) Flat surfaces such as soffits of suspended

floors roof slabs landings and the like.(C) Vertical

surface such as walls ( any thickness) partitions

and the like including attached, buttresses &

string course & the like.

7 16.39 Filling available excavated earth (excluding rock) 135.56 CuM

in trenches plinth, side or foundations etc. in

layers not exceeding 20cm, in depth consolidating

each disposited layer by ramming and watering.

8 18.80 Filling in foundation and plinth with murrum or 298.79 CuM

selected soil in layers of 20cm thickness including

watering, ramming and consolidating etc.

9 21.71 White stone bela masonary block in course in 6443.51 CuM

superstructure with stone of approved quality in

Cement Mortar 1:5 (1-Cement, 5-Coarse sand)

including packing the joints etc.

ITEM QTY for ITEM DESCRIPTION RATE PER AMOUNT

10 1.66 White stone bela masonary work in partitions 677.71 SqM

walls upto 15cm thickness in Cement Mortar 1:4

(1-Cement, 4-Fine sand) including packing the

11 1.34 Providing and Laying Ordinary Cement 8433.81 CuM

Concrete 1 : 2 : 4 ( 1 Cement : 2 Coarse Sand :

Graded Stone Aggregate 20 mm nominal size )

for R.C.C. Lintel including finishing smooth

with curing etc. complete including the cost of

formwork but excluding the cost of

reinforcement .

12 1.87 Providing and laying Ordinary Cement 8508.71 CuM

Concrete 1 : 2 : 4 ( 1 Cement : 2 Coarse Sand :

Graded Stone Aggregate 20 mm nominal size )

and finishing smooth with curing etc. complete

including the cost of formwork but excluding

the cost of reinforcement for Reinforced

Concrete Work in (A) Beams (i) Having cross

sectional area 0.05 to 0.08 SqM.

13 7.66 Providing and laying Ordinary Cement 7380.23 CuM

Concrete 1:2:4(1-Cement, 2-Coarse sand, 4-

Graded stone aggregates 20mm nominal size)

exposed work with curing etc. complete

including the cost of formwork but excluding

the cost of reinforcement for RCC Work in(iiI)

Slab having more than 10 cm & Upto 13cm

14 1295.14 Providing TMT Bar FE-500D Reinforcement as 76.52 Kg

per I.S. Standard for RCC work including

bending , binding and placing in position

complete upto floor two level .

15 4.79 White stone bela masonary block in course in 6480.95 CuM

superstructure with stone of approved quality in

Cement Mortar 1:5 (1-Cement, 5-Coarse sand)

including packing the joints etc.

16 43.04 Providing 15 mm thick Cement Plaster Single 170.34 SqM

Coat on Rough (Similar) side of single or half

brick Walls for interior plastering upto floor

two level and finished even and smooth in (ii)

Cement Mortar 1:4 ( 1-Cement :4-Sand)

17 150.91 Providing 15 mm thick Cement Plaster Single 220.46 SqM

Coat on Rough (Similar) side of single or half

brick Walls for interior plastering upto floor

two level and finished even and smooth in (ii)

Cement Mortar 1:4 ( 1-Cement :4-Sand)Extra For

Finishing with a Floating coat of neat cement

ITEM QTY for ITEM DESCRIPTION RATE PER AMOUNT

18 40.77 Providing 10 mm thick Cement Plaster in Single 220.13 SqM

Coat on Brick / Concrete Wall for interior

plastering upto floor two level finished even

and smooth in (i) Cement Mortar 1:3 ( 1-Cement

:3-Sand)Extra For Finishing with a Floating coat of

neat cement slurry

19 171.68 20 mm thick Sand Faced Cement Plaster on 339.02 SqM

wall upto height 10 M above ground level .

Consisting of 12 mm thick backing coat of

C.M. 1 : 3 ( 1 Cement : 3 Sand ) and 8 mm thick

finishing coat of C.M. 1 : 1 ( 1 Cement : 1 Sand )

20 21.95 Providing, Laying and Fixing Granite Stone For 1921.48 SqM.

Door/Window Sill in Masonry or Concert Wall in

any thick Cement Mortar 1:4 (1-Cement : 4 Sand)

true line and level jointed with neat Cement

Slurry mixed with pigment to match the Shade of

the tiles of including rubbing and Polishing etc.

Comp. as directed by Engineer in-charge incl.

21 1.50 Providing & laying 18 mm thick Granite stone 3822.61 SqM

for platform laid on 25 mm thick polished kotah

stone, Kotah Stone shelves , Partition laid in

Cement mortar 1:6 ( 1 cement :6 sand) incl.front

patta 10cm hight with quarter round polished

edge and jointing with aradalite & other required

adhesive and white cement alaid in true line level

in Kotah stone Vertical surface as per design &

drawing including curing etc complete as

directed by Engineer in charge.

22 1.00 Providing & fixing Stainless steel Sink Size 600mm 1972.93 Nos.

x 450mm fix in Kit plat form with Cement mortar

in 1:2 including fitting 32mm dia C.P. brass waste

coupling approved quality with 32mm dia rigid

P.V.C. waste pipe including making the good the

floors walls etc complete as directed by E.I.C.

23 20.02 Providing and Laying Polished Kota Stone slab 1009.30 SqM

flooring over 20 mm (average) thick base of

C.M. 1 : 6 ( 1 Cement : 6 Coarse Sand ) or Lime

Mortar 1 : 1.5 laid over and jointed with Grey

Cement Slurry including rubbing and polishing

etc. complete. (A) 25mm thick.

24 8.25 Providing and Laying Polished Kota Stone slab 1098.09 SqM

25 mm thick in risers of steps , dado and

pillars laid on 10 mm thick Cement Mortar 1 :

3 ( 1 Cement : 3 Coarse Sand ) and jointed with

Grey Cement Slurry including rubbing and

polishing etc. complete.

ITEM QTY for ITEM DESCRIPTION RATE PER AMOUNT

25 40.51 Providing and laying Vitrified tiles 8 to 10 mm 1109.27 SqM

thick , 24" x 24" in flooring treads of steps and

landing laid on a bed of 12mm thick cement

mortar 1:3 (1-Cement, 3-Coarse sand) finihsing

with flush pointing in white cement.

26 49.08 Providing and laying coloured glazed tiles of he 1473.50 SqM

size 300mm x 200mm x 8mm/ 300mm x 450mm

x 8mm in skirting, risers and dedo on 10mm thick

cement plaster 1:3 (1-Cement 3-Coarse sand ) &

jointed with white cement slurry

27 7.16 Providing and laying Ceramic tiles 6mm thick in 891.38 SqM

flooring treads of steps and landing laid on a bed

of 12mm thick cement mortar 1:3 (1-Cement, 3-

Coarse sand) finihsing with flush pointing in white

28 66.12 Providing Cement Vata ( 10 cm x 10 cm size ) 24.04 Rmt.

Quarter Round in Cement Mortar 1 :

including neat cement finishing , watering etc.

29 49.28 Providing and laying broken china mosaic flooring 771.98 SqM

for terrace using 12mm to 20mm broken piece of

glazed tiles to be laind ever cement mortar 1:3 to

plain or slope and to be tempered to bring

mortar crème out upto surface using white

cement including rounding off junctions and

extending them upto 15cm along the wall,

clearing with water and oxalic acid etc. as

30 9.66 Providing and Fixing Flush Door Shutters , Solid 1811.62 SqM

core construction with frame of First class

Hard Wood with Cross Band and Veneer Face

Plywood Face Panels including Anodised

Alluminium Butt Hinges with necessary screws

[B] Non-Decorative Type and Black Board Core

Anodised Alluminium Butt Hinges in Flush

Door Shutters [2] 35 MM thick.

31 1.79 Providing and fixing FRP of 28mm thick Fibre glass 1544.88 SqM

shutter with 1.5 to 2.0mm thick fire retardent

grade FRP skin depressed panel design having

extra reinforcement on sides and edges and in gel

coat finish. The core of the shutter is to be filled

up with injected retardent grade polyurethane

foam done insitu alongwith embedded wooden

pieces for stiffening and also for taking hinges

and fixtures. The whole FRP Frame and shutter is

to be water proof, weather proof, termite proof

and resistance to mild acid/ Alkali. Rates are to be

inclusive of S.S. hinges with necessary screws and

alluminium fixtures and fastening.

ITEM QTY for ITEM DESCRIPTION RATE PER AMOUNT

32 8.40 Providing & Fixing in posotion standard extude 3513.93 SqM

aluminum Three track with two sliding shutter in

which both shutter with Stainless steel Mosquito

net in window Section with colour anodized in

Horizontal three track section 92mm x 31.75mm x

1.30mm (having wt. per Rmt.1.07 Kg) used for

supporting three track top and bottom section is

to and vertical member of size 92mm x 31.75mm

x 1.50mm (having wt. per Rmt. 1.06 Kg) with

sliding shutter of horizontal member size 40mm

18mm x 1.29mm @ wt. of 0.456 Kg/mt. vertical

member of size 40mm x18mm 1.29 mm @ wt. of

0.456 kg/mt. with 5mm thick transparent bronze

colour tinted float glass of approved shade &

Sliding shutter and all fittings and fixtures and

transparent silicon sealant glass fixing to frame

with providing heavy handle, heavy lock, braket

as per details etc.

33 1.49 Providing and fixing standard extruded of 1288.93 SqM

alluminium section of size 63.50 x 38.10 x

1.95mm with color anodized alluminium grame

with 5mm thick transparent bronze color tinted

float glass with color anodizes alluminium frame

of ventilation with 5mm thick frosted glass as

details etc complete for windows.

34 383.63 Providing and fixing M.S. Grills of required 105.18 Kg.

pattern to wooden frames of windows etc.

with M.S. Flats at required spacings and frame

alround square or round bars with round

headed bolts and nuts or by screws. (A) Plain

35 15.35 Applying priming coat over new steel and 127.67 SqM

other metal surface after and including

preparing the surface by thoroughly cleaning

oil , greese , ditrt and other foreign matter and

scoured with brushes fine steelwood

scrappers and sand pappers with ready mix

priming paint brushing red lead .

36 57.09 Applying two coats of Birla or Asian acrylic 40.19 SqM

Lappy ( Putty ) and two coats of primer of

approved brand and manufacture on new wall

surface to give an even shade including

thoroughly brushing the surface free from

mortar droppings and othe foreign matter and

sand paperred smooth .

ITEM QTY for ITEM DESCRIPTION RATE PER AMOUNT

37 150.91 Wall Painting ( Three Coats ) with Plastic 124.16 SqM

Emulsion Paint of approved brand and

manufacture on wall surface to give an even

shade including thoroughly brushing the

surface free from mortar droppings and other

foreign matter and sand papered smooth.

38 40.77 Ceilling Painting ( Three Coats ) with Plastic 89.66 SqM

Emulsion Paint of approved brand and

manufacture on wall surface to give an even

shade including thoroughly brushing the

surface free from mortar droppings and other

foreign matter and sand papered smooth.

39 171.68 Finishing wall with water proofing cement 92.46 SqM

paint on undecorated wall surface (two coats)

to give an approved brand and manufacture

and of required shape , even shade after

thoroughly brushing the surface to remove all

dirt and remain of loose powdered materials .

40 171.68 Finishing Wall with Weatherproof Exterior 119.07 SqM

Emulsion Paint on Wall Surface ( Two Coats )

to give an required shade even after

thoroughly brushig the surface to remove all

dirt and remains of loose powdered materials

41 205.65 Steel work, welded/Bolted in built up sections 132.50 Kg

framed work including cutting, hoisting, fixing in

position and applying a priming coat of read lead

paint and Two coats of enamel paint. in beams

and joists, channels angles Tees, flats, any size &

type of section with connecting plates or angle

cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and

the like etc. completed by as per in-charge.

42 13.71 Providing & Fixing Fiberglass sheet roofing (Green 513.98 SqM

& White Colour) fixed with G.I. J or I hooks

bolts and nuts 8 mm diameter with Bitumen

and G.I. limped Washers , filled with white

lead complete excluding the cost of purlins

rafters and trusses

43 1000.00 Providing erecting and fixing bouble coated 3.91 Ltr

syntex PVC (ISI) water tank of required capacity

eatch with all necessary fittings and connection

etc, complete on terrace.

44 12.20 Providing and laying and jointing in true line and 71.93 Rmt

level following in dia. UPVC Pipe (SCH-40) for cold

water line including fittings

makePRINCE/SUPREME/ASTRAL/FINOLEX or

equivalent as approved by the engineer in charge.

Pipe shall be fixed on the wall with help of clamp

at every two meter C/C or shall be concealed as

directed inlcuding necessary fittings etc.

including. (A) 15mm dia.

ITEM QTY for ITEM DESCRIPTION RATE PER AMOUNT

45 18.30 Providing and laying and jointing in true line and 90.93 Rmt

level following in dia. UPVC Pipe (SCH-40) for cold

water line including fittings make

PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent

as approved by the engineer in charge. Pipe shall

be fixed on the wall with help of clamp at every

two meter C/C or shall be concealed as directed

inlcuding necessary fittings etc. including. (B)

46 18.30 Providing and laying and jointing in true line and 193.73 Rmt

level following in dia. UPVC Pipe (SCH-40) for cold

water line including fittings make

PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent

as approved by the engineer in charge. Pipe shall

be fixed on the wall with help of clamp at every

two meter C/C or shall be concealed as directed

inlcuding necessary fittings etc. including. (E)

47 1.00 Providing and Fixing Wash Basin with single 1668.27 Each

hole for pillar tape with C. I. & M.S. Brackets

painted white including cutting holes and

making good the same but excluding fittings

(A) Vitreous china (ii) Flat back washbasin 550 x

400mm size (i) in White color.

48 2.00 Providing and fixing CP brass waste for washbasin 67.24 Each

or sink (A) 32mm dia.

49 2.00 Providing and fixing MI fisher union for washbasin 77.97 Each

or sink (A) 32mm dia.

50 2.00 Providing and fixing Rubber plug for sink or wash 16.98 Each

51 1.00 Providing and fixing Water Closet Sqatting Pan 974.06 Each

( Indian Type W. C. Pan ) size 580 mm including

foot rest and P or S trap to be measured and paid

for seperately (A) Vitreous China (i) Long Pattern

52 1.00 Providing and fixing 100 MM size P or S Trap 329.10 Each

for Water Closet Sqatting Pan including

jointing the trap with the pan and soil pipe

in Cement Mortar 1 : 1 ( 1 Cement : 1 Coarse

53 4.00 Providing and fixing urinal or approved quality 1064.22 Each

including connecting the urinal with waste pipe

tap etc. complete. (A) Squating plate pattern

wlhite earthernware 550 x 300mm.

54 6.00 Providing and fixing chromium plated brass half 261.16 Each

turn flush cock of approved quality including

fixing in pipe line etc. complete. (ii) 25mm dia.

55 4.00 Providing and fixing PVC SWR Nahni trap IS 14735 580.47 Each

for drainage 100mm diameter with jali of the

following nominal diameter of self cleansing

design with CI screwed down or hinged grating

including the cost of cutting and making.

ITEM QTY for ITEM DESCRIPTION RATE PER AMOUNT

56 30.50 Providing and Fixing to wall , ceilling and floor 277.46 Rmt

10 KgF / SqCm working pressure polythelene

pipes of the following outside low density

complete with special flage compression type

fitting wall clips etc. including making good

the wall , ceilling and floor . (F) 75mm

57 6.00 Providing and fixing in position cowel vent to 389.15 Each

pipes (B) 75mm dia.

58 3.00 Providinng and fixing SW Gully trap with CI 1279.40 Each

grating brick masonary chamber and water tight

CI cover with frame of 300mm x 300mm size

(inside) with standard weight. (A)100 x 100mm

59 1.00 Constructing masonary for underground C. I. 2903.89 Each

Inspection Chamber and bends with bricks

having crushing strength not less than 35 Kg /

SqCm in C. M. 1 : 5 , C. I. Cover with frame

(light duty) 455 mm x 610 mm internal

dimensions , total weight of cover with frame

to be not less than 38 Kg ( Wt. of cover 23 Kg

and Wt. of frame 15 Kg) R.C.C. top slab with 1 :

2 : 4 mix ( 1 Cement : 2 Coarse Sand : 4 Graded

Stone Aggregate 20 mm size ) Foundation

Concrete 1 : 5 : 10 , inside plaster 15 mm thick

with Cement Mortar 1 : 3 finished smooth

with a floating coat of neat cement on walls

and bed concrete etc. complete. (i) Inside

dimensions 455mm x 610mm and 450mm deep

for single pipeline.

60 12.20 Providing and joining in true line and level 110 868.22 Rmt

diameter UPVC SWR Type-B pipe conforming to IS

13592-1992 with one end plain and other end

socketed with rubbering & fitting conforming to

ISI 14735-1999 of approved make for drainage

system pipeline, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110mm

diameter x 149mm length x 145mm high at every

2000mm center to center or shall be concealed in

walls as directed including necesssary fittings

such as bends, shoes, etc. including testing of pies

and joints and jointed with adhesive solvent

cement including cost of all materials.

ITEM QTY for ITEM DESCRIPTION RATE PER AMOUNT

61 12.20 Providing and joining in true line and level 160 826.12 Rmt

diameter UPVC SWR Type-B pipe conforming to IS

13592-1992 with one end plain and other end

socketed with rubbering & fitting conforming to

ISI 14735-1999 of approved make for drainage

system pipeline, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160mm

diameter x 210mm length x 196mm high at every

2000mm center to center or shall be concealed in

walls as directed including necesssary fittings

such as bends, shoes, etc. including testing of pies

and joints and jointed with adhesive solvent

cement including cost of all materials.

62 2.00 Providing and fixing pillar tap, capstan head, 305.67 Each

screw down high pressure with screws, shanks

and back nuts.(i)15mm dia

63 4.00 Providing and fixing screw down bib taps of the 184.98 Each

following size. (A) Brass chormium plated screw

down bib tap (i) 15mm dia.

64 5.00 Providing and fixing gun metal check or non 416.47 Each

return fullway wheel valve. (C) 25mm dia.

65 3.00 Providing and fixing CI Manhole cover 0.60M x 948.68 Each

0.45M size having weight not less than 35Kg.

66 1.00 Providing soak pit including excavating and filling 3423.04 Each

bricbats with dry masonary work at top for 45cm

height including providing vatas in CM 1:3 with

finishing curing etc. complete as directed. (B)

Add 1% Labor Cess Rs.

Grand Total Rs.

Grand Total Rs.

Rupees Twelve Lakh Thirty Thousand Eight Hundred Ninety Four and Paise Sixty Six Only