Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.1 LAccepted-AOC 104 AREA MARRIPALEM VISAKHAPATNAM 530 007 | VISAKHAPATANAM | ANDHRA PRADESH | 530007 | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹29.5 L+₹2.4 L (8.85%)Rejected-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L2 | Rejected-AOC Not being L1 | |
| 3 | L3₹29.8 L+₹2.8 L (10.2%)Rejected-AOC | L3 | Rejected-AOC Not being L1 | |
| 4 | L4₹30.7 L+₹3.7 L (13.5%)Rejected-AOC | L4 | Rejected-AOC Not being L1 | |
| 5 | L5₹31.5 L+₹4.4 L (16.4%)Rejected-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L5 | Rejected-AOC Not being L1 |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
30 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Naval Depot
Garrison Engineer Naval Depot Industrial Estate Post 104 Area Visakhapatnam 530007
COMPREHENSIVE MAINTENANCE WORKS OF NAVAL ARMAMENT DEPOT AREA UNDER AGE BR II OF GE ND VISAKHAPATNAM
2022_MES_561019_1
8223GEND
Open Tender
Civil Works
Item Rate
180 days
Visakhapatnam
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE ND VIZAG
₹68,000
3 Mar 2023
2 Nov 2022
5 Dec 2022
2 Nov 2022
30 Nov 2022
16 Nov 2022
Amount
The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:- Tenderers/bidders are advised to vist the site and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage.
Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 brass fittings on walls/ceiling or laying in floors including taking down old pipes of any type complete all as specified and directed.
Supply and laying 16 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 brass fittings on walls/ceiling or laying in floors including taking down old pipes of any type complete all as specified and directed
Taking down Chowkats or frames exceeding 1.5 Sm and not exc 4 sqm each (Without taking off shutters from the frames)complete all as specified and as directed.
Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.
Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed.
S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F Factory made 2nd class hard wood 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc divided into square with rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc (size of members of shutters as specified in SSR Par –I section 8 Clause 8:24 (b) complete all as specified and directed.
S&F Factory Made 2nd class hard wood 30mm thick, plain, framed paneled shutters (any number of panels) with panels of timber flat on both side (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers etc complete all as specified and directed.
S&F anodised aluminium doors using 96.6mm X 44.8 mm X 1.5 mm aluminium chowkhats, 84.0 x44.7mmX1.5mm section vertical styles and 101. 60X44.88X1.5mm rails mounted on 04 Nos SS butt hinges 100 mm for each shutter with mortice lock six lever vertical type mild steel 100 mm size (Make Godrej/Harrison) 02 Nos tower bolt 150 mm , sliding bolt 300 mm long 01 No, 200 mm 2 Nos door handles and fittings , bottom panel and top panel shall be fixed with snap beading rubber of suitable size complete all as specified and directed .
S&F anodised Aluminum sliding window and ventiletor frame made up 62 mm X 29.5 mm X1.5 mm thick aluminium section & shutter made up 38 mm X20 mmX1.5 mm thick without sash bar aluminium section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable aluminium handle and locking arrangment etc complete all as specified and directed.
S& in repairs aluminum frame work for grill, deco grill model DG-104 with 10 mm thick flat matt design making scope and level and fixed in 30 x 12 x 5 mm channel including necessary fixing arrangements etc complete all as specified and as directed.
S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.
M&L 12 mm thick prelaminated particle boards exterior grade prelaminated both sides with decoratative choice lamination fixed in aluminium frame work with screws complete all as specified and directed.
M&L for taking down and refixing the same existing aluminium door shutters after carrying out repairs as required including removing the existing beading and fixing new rubber beading of suitable size with adhesive, overhauling of floor springs including greasing and oiling as required , each shutter area not exceeding 4 Sqm complete all as specified and directed.
S & F in repairs aluminium body door closer hydraucally regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded crushed stone aggregate) as in hold fasts complete all as specified and directed.
S&F mild steel flat iron of size 50x3mm thick as in hold fast including all necessary fixing arrangement complete all as specified and directed
S&F butt hinges 100 mm long medium weight, cold rolled stainless steel complete all as specified and directed.
S&F Stainless steel butt hinges 75 mm long medium weight, cold rolled complete all as specified and directed.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed .
S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F aluminium alloy 300mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed complete all as specified and directed.
S & F in repairs 3 mm thick Sheet glass, ordinary quality in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads complete all as specified and directed .
M&L for brick work with flyash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 including demolition of old brick works complete all as specified and directed
M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including demolition of old brick work complete all as specified and directed
M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even & smooth without using extra cement including taking down of old plaster complete all as specified and directed
M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement including taking down of old plaster complete all as specified and directed
M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded crushed stone aggregate) in plinth protection and finishing the concrete surface even and smooth without using extra cement including demolition of old concrete complete all as specified and directed.
M&L for 100mm thick PCC type B 2 1:2:4 using (40mm graded crushed stone aggregate) as in sub base of flooring including demolition of old concrete complete all as specified and directed.
S & F chequered cement concrete tiles 300 x 300 x 22 to 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick cement screed bed in CM 1:6 complete all as specified and directed.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finishing the surface even and smooth without using extra cement including mixing of water proofing compound @3% of weight of cement wherever required for floors and sides of wall in sunken floors NOTE: Water proofing compound will be measured separately
Supply only integral water proofing compound ISI marked complete all as specified and directed
M&L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick screed bed or bedding layers in CM 1:4 including dismantling of old tiles complete all as specified and directed.
M&L for Virified Ceramic tiles Double charged Light shade, 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm and not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and including 20 mm thick cement screed bed in cm 1:4 including dismantling of old tiles complete all as specified and directed
S&F in repairs rotational moulded polyethylene water storage tanks 3 layered ISI Marked (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position complete all as specified and directed.
S&F in repairs rotational moulded polyethylene water storage tanks 3 layered ISI Marked (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position complete all as specified and directed.
S&F 110 mm dia PVC (SWR) pipes single socketed , in any length with rubber ring joints ,fixed in walls including dismantling of old pipes complete all as specified and directed .
S&F in repairs 110 mm dia bore PVC (SWR) bends complete all as specified and directed.
S&F in repairs 110 mm PVC (SWR) junction single(Single T) equal or unequal with access doors complete all as specified and directed.
S&F in repairs 110 mm PVC (SWR) vent cowl complete all as specified and directed
M&L Preparation of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer by using auto roller or airless sprayer machine complete all as specified and as directed.
M & L preparing new unplastered surfaces by using vaccume based hand held or long handle sander machine and applying Three coats of white wash on walls and cornices complete all as specified and directed
M & L preparing plastered or unplastered old decorated surfaces by using vaccume based hand held or long handle sander machine and applying one coat of white wash on walls and cornices complete all as specified and directed
M & L preparing plastered or unplastered old decorated surfaces by using vaccume based hand held or long handle sander machine and applying one coat of white wash on Ceilings complete all as specified and directed
Preparing old painted/distempered surfaces by using vaccume based hand held or long handle sander machine and applying a coat of distemper oil emulsion by using Auto roller or Airless sprayer machine on surfaces of walls complete all as specified and directed.
M&L Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) by using auto roller or airless sprayer machine complete all as specified and as directed.
M&L Preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) by using auto roller or airless sprayer machine complete all as specified and as directed.
Preparing old surfaces of walls by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying one coat of exterior weather proof emulsion by using auto roller or airless sprayer machine complete all as specified and directed .
Preparing old surfaces of walls by using vaccume based hand held or long handle sander machine and and applying Two coats of cement based paint by using auto roller or airless sprayer machine complete all as specified and directed .
Dismantling chain link fencing wiremesh any type and size complete all as specified and directed
Dismantling fencing post (RCC) any section including taking out embedded portion and making good disturb ground complete all as specified and directed
M&L excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in hard /dense soil, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.
Plain Cement Concrete Type D 2 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundations,filling and mass concrete complete all as specified and directed.
Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded crushed stone aggregate) as in foundations,filling and mass concrete complete all as specified and directed.
S&F Framed work such as posts and struts in fencing including cutting tops to shape as directed,drilling holes notching wire etc(for securing wire mesh etc)including necessary drilling bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.
S & F Mild steel works in wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.
S&F Mild steel screw bolts of 11 to 15 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed bothe ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 10cm and not exceeding 15cm long complete all as specified and directed
S & F M S galvanised chain link fencing of any size inculding provision of new line wires of 10 mm dia TMT round bars ,fixed with any of standards, rails, straining bolts, etc including provision of binding wires complete all as specified and directed
M & L for Cutting / Chipping the spalled loose concrete of RCC structural members and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Zinc rich epoxy primer to all steel surfaces as antirust agent and welding steel wire Fabric / Mesh of aperture 75mm and 2mm dia of wire to existing reinforcement, applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd as per manufacturer's instructions and providing pressure Guniting average 40 mm thick at a pressure of not less than 6 KG / Sqcm in CM 1:3 duly mixing the mortar with and including polycrete admixture of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 2% of weight of cement, finishing the surface rough and finally rendering with 15 mm thick in CM 1:4 and finishing the top surface even and smooth without using extra cement conforming to proper geometrics to match with the existing surface including providing double scaffolding and safety measures as required and removal of the same on completion and disposal of demolished materials / debris outside MD land complete all as specified and as directed. Note:- The rates quoted by the tenderer shall deemed to be included for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] Providing steel scaffolding, mechanical hanging platform with safety arrangements. [ii] Working in various buildings even multistoried high at various locations in NAD.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including 6mm dia GI hangers complete all as specified and as directed .
S&F Anodised aluminium snap grid frame work for false ceiling fixed with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed.
S&F Gypsum Board 12mm thick in ceiling fixed with screw on false ceing frame work of any type as per manufacturers instructions complete all as specified and as directed
S&F in repairs Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed
S&F Pre- painted galvatume aluminum zinc coating GI basedplain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F in repairs 1.00 mm thick Plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed
S&F in repairs 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and with one shop coat of primer, erected in position as indicated, push pull or manual type including removal of old shutter complete all as specified and as directed
S&F in repairs 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and with one shop coat of primer, erected in position as indicated, gear operated type with bevel gear box and crank handle including removal of old shutter complete all as specified and as directed.
S&F in repairs 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and with one shop coat of primer, erected in position as indicated, gear operated type with chain wheel and hand chain including removal of old shutter complete all as specified and as directed
S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed
S&F in repairs Ball bearing for rolling shutters complete all as specified and as directed
M& L for oiling and greesing of rolling shutters and make it smooth functioning (Size of Rolling shutter not exceeding 16 Sqm) including necessary safety arrangaments complete all as specified and as directed
M& L for oiling and greesing of rolling shutters and make it smooth functioning (Size of Rolling shutter exceeding 16 Sqm not exceeding 30 Sqm) including necessary safety arrangaments complete all as specified and as directed
S&F 5 mm thick solid PVC wall lining consisting of wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including dismantling old wall panelling complete all as specified and as directed
S&F in repairs 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall male pvc frame complete all as specified and as directed
Removing the existing roof treatment completely and roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc then Brushing neat cement slurry with 3 Kg of cement per Sqm,then Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair without using extra cement then supplying testing and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application including coating the APP membrane surface with water based bituminous primer of blow bitumen of 85/25 at 1.2 Kg/Sqm both at bottom and top of the membrance (Three layers of bitumen primer one on plastered surface and two on APP membrane) and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified and directed. Notes:- (a)The Roof treatment work shall be carried out through the original manufacturer or his authorized applicator only , Contractor will have to submit all necessary documents like Purchase Vouchers, test Certificates, Authorization letter of manufacturer, etc before payment of RAR. (b) Contractor will have to submit a written guarantee for water proofing treatment for a period of 10 years on a stamp paper of Rs 100 . (c) Contractor will have to deposit a FDR for a Sum equal to 3% of Total Cost of water proofing Treatment before issue of final completion of work failing which the sum shall be deducted from his RARs/Final Bill.
prepration of new surfaces of false ceiling by using vaccume based hand held or long handle sander machine and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of oil bound distemper by using auto roller or airless sprayer machiner over a coat of primer complete all as specified and directed
SAI SRINIVAS CONSTRUCTIONS
RAM SREE CONSTRUCTIONS
NIKESH ENTERPRISES
GS ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .