Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAccepted-AOC CHAMANAPASSIL HOUSE CRAV 25 VELLAPPALLY KOCHI 28 | KOCHI | ERNAKULAM | KERALA | L1 | Accepted-AOC l1 | |
| 2 | L2₹8.3 L+₹12,886.78 (1.58%)Rejected-AOC | L2 | Rejected-AOC l2 | |
| 3 | L3₹8.9 L+₹74,946.88 (9.19%)Rejected-AOC | L3 | Rejected-AOC l3 | |
| 4 | L4₹8.9 L+₹75,198.76 (9.22%)Rejected-AOC | L4 | Rejected-AOC l4 |
Tender Value
₹8.9 L
EMD Value
₹22,320
Closing Date
3 Jun 2020, 6:00 pmClosed
The Assistant Engineer, LSGD Engg Wing , Adoor Mu
The Assistant Engineer, LSGD Engg Wing , Adoor Municipality
ADOOR MUNCIPALITY. CMLRRP 2020_21. PUTHUSSERRY COLONY ROAD IMPROVEMENT IN WARD 18 19 20 E1/2901/2020
2020_LSGD_358335_1
E1/2898/2020/ CMLRRP/ADR
Open Tender
Civil Works - Roads
Item Rate
180 days
Adoor
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,786
Yes
online
₹22,320
Yes
19 Aug 2020
22 May 2020
5 Jun 2020
22 May 2020
3 Jun 2020
22 May 2020
Amount
Road widening and retarring
od647790/2020_2021 : Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50cm and lift up to 1.5 m.All kinds of soil
4.9 : Wet Mix Macadam <br> Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. <br> By Mechanical Means with 1 km lead
75.5.1.1pb : Prime Coat - Low porosity - With Packed Bitumen Rates <br> Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
75.5.2.3pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.5.5.B.2pb : Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.
75.5.2.1pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.5.9.2.2.Pa : Plastic Roads - Bitumen S-65 <br> 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder <br> Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 (with 7% of bitumen replaced by shredded waste plastic) <br> Case - I By Manual Means <br> (II) Bitumen (S-65) (VG - 30)
75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means <br> Case III : Type C <br> (II) Bitumen (S-65)
Irish Drain
3.5.1 : Excavation in Cutting in Soil by manual means with lead upto 50 mExcavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3
od650978/2020_2021 : Construction of plain cement concrete pavement,thickness as per design,over a prepared sub base,with 43 grade cement or any other type as per clause 1501.2.2M20(grade),coarse and fine aggregates conforming to IS 383,maximum size of coarse aggregate exceeding 25mm,mixed in a concrete mixer of not less than 0.2cum capacity and appropriate weigh batcher using approved fixed side form work ,spreading the concrete ,compacted using needle vibrator and finished in continous operation including provision of curing of concrete slabs for 14 days and water finishing to lines and grade as per drawing and technical specifications clause 1501(modified 6.4)with out form work
od650851/2020_2021 : Providing and fixing Name board with Granite slab
MARY MATHA
BIJU M
Krishnakumar Krishnan Nair
Bidder Name
Krishnakumar Krishnan Nair
UNNIKRISHNAN
BIJU M
MARY MATHA
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_504853.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .