Construction of Balance work for 1000MT capacity Godown cum Assaying Lab in Market Yard, Kuppam of A.M.C, Kuppam in Chittoor District

P.C.C. (1:5:10) prop. Using 40mm HBG Machine crushed metal with screened sand including cost and conveyance of all materials to site from approved source, machine mixing, laying concrete in layers of 15cms. Thick well-compacted in position, curing for required period protecting the sides of foundation trenches whenever necessary and all incidental and operational charges and labour charges etc., complete as per standard specification referred and as per directions of the departmental officers

Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work.

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrating curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Columns above 3.66 M

Beams at 4.80 Mts

Gutter slab 150mm

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 200 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., cpomplete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure Walls. For superstructure Above 3.00 M

VCC M- 20 Nominal mix using 20mm size HBG metal machine crushed metal as per SS 108 , machine mixing concrete laying in position in layer not exceding 150mm in thickness, approved quarry including cost and conveyance of all materials with cement 350 kgs / cum, and all other materials from approved source to site labour charges for scaffolding, centering, machine mixing, laying, vibrating and curing for various heights and depths including all incidental and operational charges, all water leads and lifts etc., complete for finished item of work as per standard specifications and as directed by Engineer-in-Charges as site of work.

Plastering 12mm thick in single coat in CM (1:5) for even surface cost and conveyance of all materials like cement, sand (screened), water etc., to site, and all operational incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work (APSS No.901&903)

Upto 3.00 M. height inside A/R

Above 3.00 M. height

Plastering 12mm thick in single coat in CM (1:3) for even surface cost and conveyance of all materials like cement, sand (screened), water etc., to site, and all operational incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work (APSS No.901&903)

Upto 3.00 M. height A/R out side

Above 3.00 M. height A/R out side

Manufacturing, supply and fixing in position of 0.75 x 0.90M size steel Air inlets with rolled steel angles and the outer frame of 35x35x3mm M.S. equal angle welded with 12mm dia square rods at 75mm C/C in both ways (9 Nos. on each side) and internal frame with 'Z' angle of size 25x25x3mm and 'T' angle of size 20x3mm with diamond mesh including providing M.S. shutter of 16 guage and fixing the M.S.Flat of size 25x5mm to the shutter including all accessories such as hold fasts, tower bolts 2 Nos, hings 4Nos including cost of all materials required for the work labour charges etc., complete as per drawing and as per standard specifications and as directed by the Engineer-in-charge for finished item of work.

Supply and fixing of Rolling shutter made of 80x1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end locks, mounted on specially designed pipe shaft of 50mmdia nominal bore MS B class pipe with brackets,plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete painted with one coat of approved steel primer, locks, ball bearings, all acessories etc., complete for finished item of work as per special spn: 108

Supply & fixing collapsible steel shutters with verticals, double channel of 20x10x2mm of 10mm centre, Bracers with flat iron 40x40x6mm with 38mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mm8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete as per standard specification for finished item of work as per Spn 1105.

Supplying and fixing GYP Board suspended regular single layer false ceiling (GS MFSC-4-1 Gyp board conforming to IS 2095-1982 fixing to Gyp steel GI perimeter channels of size 20mm x 27mm x 30mm (web) of 0.55mm thick along the perimeter of ceiling screw fixed to brick work / partition at 6.10mm c/c and suspending the frame work using intermediate channels (45mm x 15mm x 15mm x 0.9mm) from soffit at 1220mm c/c with ceiling angle (25mm x 10mm x 0.55mm) fixed with GI cleat and steel expansion fasteners and connecting clip to the ceiling channels (with knurled web of 51.5mm x 26mm x 10.5mm x 0.55mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5mm tapered edge Gypboard with 25mm drywall screws at 230mm c/c and jointing and finishing using flush look including filling the tapered and square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Ldia Gypsum Ltd specification

Construction sawn joining groove (using dimond studding blades) 3 to 5 mm wide and 1/4 to 1/3 depth of the slab + or 5mm or as stipulated in the drawing and dowels bars complying with clause 602.6.5 of specifications for raod and bridge works (third revision) published at new 2 delhi in 1995 by IRC on behalf of Goverment of India, Ministry of surface transport and as directed in the undergone initial hardening and as hard enough to tae the road of joint sawing machine without causing damage to the slab. The joint ceiling compound shall be of 0/0 to 1/8.

Supply and filling of hot sealing compound ( Grade A) ISI poly sulphide and sealing joints includng cost and conveyance of the all materials etc for expansion and contraction joints at 4.50 m interval / for longitudinal/transverse joints as per MORTH specifications

Painting with synthetic enamel paint in two coats of grade 1 quantity of approved brand and colour to Trusses, purlins, wind bracings, bottom runners, shutters, air-inlets, ventilators, channels etc.,including cost and conveyance all meterails labour charges etc., complete for finished item of work and as directed by the departmental officers. For New Iron Work

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for external walls

White washing three coats with lime of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Supply and fixing of 110mm dia PVC rain water pipes of 4 Kgf/Sq.cm. including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Self supported arch shaped GALVALUME sheeting. Color compying to ASTM A792, base metal thickness 1.00mm, alloy coating AZ 150 (Alumminium 55% Zinc 43.50% and Silicon 1.5%), Yield Strength: 350MPA, Paint coating regular modified polyster top coat 12 microns epoxy, top color: Combination of Blue and Off white and Bottom color grey using make of Thyssen Krupps, Germany / Dongbu Steel Co. Limited, Korea / Corus Steels, U.K/ Union steel, Korea / Yieh phui Enterprises Ltd., Taiwan OR Indian Make : JSW/TATA Blue scope. The Steel Sheet shall be 3'-0" (914MM) width which shall be curved and moulded at site using mechanical press and dies to the desired curves and shape to form 2'-0" (605MM) wide interlocking panels. These panels shall be erected in position and the joints are seamed. The installation should be done by mechanized methods. Vendor has to mobilize required number of Hydra for transportation of sheets and Cranes for the erection of Seamed Sheets and complete the entire work satisfactorily by using the fixtures like anchor fasteners, standard light hangers, turbo ventilators and sky lights etc., Completed. Excluding Taxes