PECIAL REPAIR TO CERTAIN OFFICER CDTS TOILETS AT IMA DEHRADUN

Amount

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M & L for brick work with old size sub class B brick straight or curved on plan exc. 6.00 M mean radius built in CM 1:4 complete all as specified and directed

M&L Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specified and directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for RCC (1:2:4) type B1 (Using 20mm graded crushed stone aggregate) as in slabs, shelves and the like complete all as specified and directed.

Mild steel TMT bars 10mm dia and above, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 18-20mm thick granite (as approved colour like Z black / ruby red etc) machine cut as in floor, steps, platform and like, laid over and incl 20mm thick cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Two way chromium plated angle cock 15mm dia with wall flange fixed in repair complete all as directed Make: CERA (CURVE) CAT NO F-1023211 OR JAQUAR CAT NO SQT-526AFKN OR HINDWARE F-530006

S&F 15mm Chromium plated fancy type Stop valves/Angle vzlve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handl screwed both ends for iron pipe or for unions and fixed in repair complete all as directed. Make: CERA (RUBY) CAT NO F-1005201 OR JAQUAR CAT NO KUP-35053 PM OR HINDWARE F-260004

Supply and fixed in repairs CP centre hole basin mixer without Popup Waste System with 450mm Long Braided Hoses 15 mm bore for WHB, complete all as specified and directed. Make: CERA (RUBY) CAT NO F-1005451 OR JAQUAR CAT NO OPP-15005 BPM OR HINDWARE F-400014

Supply and fixed in repairs hot & cold 15mm dia Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flangesr complete all as specified and directed. Make: CERA (RUBY) CAT NO F-1005401/ F-1005402 OR JAQUAR CAT NO OPP-15125 BPM OR HINDWARE F-400011

S&F 15mm bore fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair complete all as directed. Make: CERA (RUBY) CAT NO F-1005401/ F-1005152 OR JAQUAR CAT NO OPP-15037 PM OR HINDWARE F-400002

S&F in repairs Overhead Shower 105mm dia Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) Rubit Cleaning System and shower arm with flange, complete all as specified and directed. Make: CERA CAT NO F-7010116 AB OR JAQUAR CAT NO OHS-1667 OR HINDWARE F-160216 CP

S&F, for provn Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1. metre long easy flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. Make: CERA CAT NO F-8030111 AB OR JAQUAR CAT NO ALD-CHR-577 OR HINDWARE F-160122

S & F for Brass chromium plated towel rail 600mm size fixed in repair complete all as specified and directed. MAKE: CERA MERIDIAN (SS 304) CAT NO F-1515103C4 OR JAQUAR CPA - 1111 OR HINDWARE F- 890011

S&F, CASCADE PATTERN in repairs, Vitreous China wash down water closet (pedestal pattern), including plastic water closet seat cover, with dual flush cistern, of capacity as recommended white, closed pattyern flat bottom and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. Make: CERA CAT NO S-1013226 OR Equivalent in JAQUAR / HINDWARE

S&F, PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F counter top Wash basins, Vitreous China (flat back or angle back type) (550 x 425) mm, including cutting in granite stone slab inclusive of fixing of supply and waste pipe fixed in repair complete all as directed. Make: CERA CAT NO S-2030125 OR JAQUAR CAT NO FLS WHT 5701 OR HINDWARE OVAL 10017

M&L Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair complete all as directed

S&F, Chromium Plated steel soap dish fixed in repair complete all as directed. MAKE: CERA MERIDIAN (SS 304) CAT NO F-5015110C4 OR JAQUAR AKP - 35753PS OR HINDWARE F- 880003

Supply and fixed in repairs Toilet Roll Holder with Stainless Steel Flap complete all as specified and directed. MAKE: CERA MERIDIAN (SS 304) CAT NO F-5015160C OR JAQUAR ACN - 1131N OR HINDWARE F- 580004

Supply and fixed in repair CP grating 100mm dia and with or without hole complete all as specified and directed.

Supply and fixed in repairs looking mirror of any size or shape 5.5mm thick, and fixed to wall with 4 No SS studs complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

M&L for 25mm thick plain cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floors below tile etc complete all as specified and directed.

M & L for Non - skid coloured Ceramic tiles (joint free 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M & L for Glazed coloured ceramic tiles (joint free) in vertical surface, size (300 X 450 X 7) mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles over and including 10 mm thick rendering CM (1:4) complete all as specified and directed.

BLANK

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area of ecah not exc 1.5 sq. m complete all as specified and directed.

S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .

S& F Factory made 30 mm thick single extruded WPC (Wood Polymer Composite) solid Moulded Flush Door Shutter with both side laminated Spray Painted with solvent based colour of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S&F Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as directed

S&F 100mm long aluminium anodized handle cast complete all as directed.

S&F 100mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

S&F Powder coated aluminium Anodized frame for doors , windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc fixed in repair complete all as specified. (Minimum thickness of powder coating not less than 50 micron) complete all as directed

S&F for 5.0 mm thick sheet glass, ordinary quality and glazing with rubber gasket and aluminium glazing clips, area in square n exc 0.5 sqm in each pane complete as specified and directed.

S & F factory made 18mm thick prelaminated colour WPC Board having base brown, minimum density of 600 kg/cum, as per ISO 9001:2015 certified for Bath cabinet Shutter/ partitions/ shelves/ drawer Front, cup board shutters, frame etc . The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S&F, Continuous (Piano) hinges, mild steel, bright finished or electro galvanised, width of flap 30mm (when open), complete all as directed

M & L for ball catches with 8mm dia steel ball brass body and striking plate including cutting in and fixed complete all as specified and directed.

S&F in repair stainless steel bow handle 75mm size with machine screw fixed in cup boards drawers etc all as directed.

M & L for Complete removal of existing treatment of wall surfaces Mechanical Sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers including cornices, pillar etc to receive putty complete all as specified and as directed.

Prepration of new / scraped surface of wall / ceilling and applying 2 mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed.

M&L, Preparation of newly plastered or scrapped surfaces of wall/ ceiling by making free from dampness, oil or any loosely held particles, filling cracks if any with crack seal and applying a coat of Dampstop Advanced of Berger or equivalenet of Sika/ Asian Paint/ Fosroc on saturated dry surface of wall as per manufacturer instruction complete all as specified and directed.

M&L two coat oil bound distemper over a coat of primer any tint on walls and ceiling complete all as specified in SSR Part I and directed by Engr-in-Charge.

Rendering 12 mm thick on brick or concrete surface using Ready mix mortar mixing with WPC all as per manufacturers instructions, surfaces finish even and smooth without using extra cement complete all as specified and directed .

Supplying and laying of CPVC pipes 15mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors and proper pressure testing shall be carried out at site complete all as specified and directed.

Supply and Fixing 16mm, Brass thread Elbow complete all as specified & directed.

Supply and Fixing 16mm, Brass Thread Tee complete all as specified & directed.

Supply and Fixing 16mm, Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified & directed.

Supply and Fixing 16mm, Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified & directed.

M&L for providing precast cement concrete louvres and jallies 35 mm thick (measured solid) including all mouldings but excluding frame in cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates and set in cement mortar 1:4 complete all as specified and directed. ( Note - Work to be carried out upto Triple storey Building & Rates are inclusive of Scaffolding)

Taking down of existing sunken slab treatment including demolition of sub base concrete of any description form the sunken portion and cleaning the surfaces by washing down with water and rubbish off the premises and treated the sunken portion as per following specifications:- (a) Cleaning and filling crevices, cracks and undulations by applying cement sand mortar mixed with SBR latex polymers of make- Dr fixit Pidicrete URP or equivalent of Sika or STP Ltd as per recommendations of manufacturer and then brushing the entire floor and walls of sunken area with neat cement slurry @ 3.00 kg/ sqm and laying 30mm average thickness of plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) over sunken slab portion in required slope and finishing the top surfaces even and smooth using extra cement . (b) Provision and fixing of 50mm dia PVC pipe as spout, projection 150mm beyond outer face of the wall of sunken floor to drain out water.

(c) Apply two coats of acrylic cementitious water proofing coating resin base 2K, manufactured by M/s Pidilite industries Ltd, STP Ltd, Sika or equivalent make as approved by GE as per manufacturer recommendations on floor and all around wall surfaces dulyv sanding with dry coarse clean sand in second wet coat of 2K to make rough surface to receive plastering all as directed. (d) Laying a protective coat of 15 mm thick rendering in cement mortar 1:3 mixed with liquid water proofing compound @ 200ml per 50 kg cement or as per manufacturers instruction, of approved make on all surfaces of sunken area including vertical wall upto 450mm height, after preparations as mentioned above. Method of application for acrylic cementitious water proofing coating shall be followed as per manufacturers instructions. Note :- PCC sub base for filling under floor over treated sunken floor sufaces upto required level shall be measured and paid seperately under respective item of BOQ.

M&L for plain cement concrete 1:5:10, type E 2, using 40mm graded stone aggregates, finished the surfaces even and fair as in filling in sunken portion of toilet floor, complete all as specified and as directed.

Repais to Toilet shafts well by taking down cement plaster of any description on brick wall or concrete surfaces, built in cement mortar including raking out joints, hacking for key , scrubbing down with water etc upto 18-20 metres height in narraow space and rendering 12 mm thick using ready mixed cement mortar, mixed with liquid WPC as per manufacturers instructions, surfaces finish even and smooth without using extra cement, over water proofing coating of 2K, all complete as specified and directed. Note :- 1. Water proofing coating of 2K and WPC liquid compound shall be measured and paid seperately in respective items of BOQ. 2. Rates are included for arrangement of scafolding, ladders, supports & safety measure items and narrarow space working situations etc upto roof level height of triple storied bldgs.

M&L, for two coats of cementious resin based 2K water proof coating @ 1.60 kg per sqm for two coats on brick wall or concrete surfaces including cleaning, washing with clean water, making wet dust free surfaces before applying the water proof coating and sanding with coarse washed dry sand over the wet second coat of 2K, to make the surfaces rough to receive the wall plastering, all complete as specified and directed by Engr-in-Charge. Make :- STP, Sika, Pidilite or Equivalent.

Supply only liquid water proofing compound complete all as specified & directed.

40mm thick PCC 1:2:4, type B1 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed.

Preparation of newly plastered or puttied surfaces and applying two coats of Apex paint (Weather coat exterior paint) over one coat of exterior primer complete all as specified and directed. (work to be carried upto a height of triple storey bldg) .

Dismantling of cast iron or reinforced concrete drain pipes 75mm bore, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F for 75mm bore Cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in trenches or in floors

Refixing of old servicable 75mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed on walls after replacement of branch pieces, bend or repair of joints etc including cleannig old pipe, complete all as specified and directed.

S&F for 75mm bore Cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, fixed to walls, complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes 100mm bore, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F for 100mm bore Cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in trenches or in floors

Refixing of old servicable 100mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed on walls after replacement of branch pieces, bend or repair of joints etc including cleannig old pipe, complete all as specified and directed.

S&F for 100mm bore Cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, fixed to walls, complete all as specified and directed.

S&F for Cast iron 75mm diameter of outlet floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) complete all as specified and directed

S&F for Bends (any radius) 100mm pipe, diminishing pieces of tapers (large bore measured)

S&F for Bends (any radius) 75mm pipe, diminishing pieces of tapers (large bore measured)

S&F for Branch pieces single (equal or unequal) or Tee, ordinary or inverted(spigot or socket type) with parallel branches for 75mm bore pipe,

S&F for Branch pieces single (equal or unequal) or Tee, ordinary or inverted(spigot or socket type) with parallel branches for 100mm bore pipe,

S&F for Branch pieces, double (equal or unequal) ordinary or inverted(spigot or socket type) with parallel branches for 100mm bore pipe,

Taking down carefully existing aluminum/copper surface/concealed point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, lamp holder, regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces in CM 1:3 of walls, floors, ceiling etc including painting if required to match up with existing surfaces complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with suitable size of Metal flush box zinc oxide plated of suitable for mounting of modular switches, sockets, fan regulator etc with modular plate and frame of 01 module to 18 module as required at site, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed of the following. Note : 1. Point wiring should be carried out on surface mounted rigid PVC conduit or casing-caping on existing RCC beam, column, roof or false ceiling. 2. Colour code will be maintained as per IE rule i.e. Red/Yellow/Blue for phases, Black for Neutral and Green for earth wire. 3. Cost of Modular Metal flush box, modular plate and frame deemed to be included in quoted rate for point wiring and the make and model and size i.e, No of modules, for all modular items will be approved by GE. 4. Make of Modular metal flush box, modular plate and frame, switch, socket, regulator, bell push should be same & colour of frame switches match up with the surrounding. 5. Switch, socket, regulator, bell push will be measured and paid under respective item.

One light/bell point point controlled by one 1-way modular switch.

One ceiling fan/Exhaust fan point controlled by one 1-way switch.

One three pin 5 Amp socket on independent board

S&F in replacement modular switch 1 way 6/10 amp, 1 Module complete all as specified and directed.

S&F in replacement of modular socket outlet 2/3 pin combined 2 module 6 amp white in colour complete all as specified and directed by Engr-In-Charge.

Supply & fix in replacement of ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed.

S&F in replacement of LED tubelight batten fitting 20 Watt made of aluminium housing suitable for fixing on walls/ceiling, warm/natural/cool white as per requirement at site complete all as specified and directed by Engr-In-Charge.

S&F in replacement of LED tubelight batten fitting 10/12 Watt made of aluminium housing suitable for fixing on walls/ceiling including connections, warm/natural/cool white as per requirement at site complete all as specified and directed by Engr-In-Charge. Make: Trim Linea Neu of Crompton/SmartBright of Philips/ENDURA LINEAR NEO of Havells

M&L for Sub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 2.50 Sq.mm. (nominal area) drawing in and including suitable size dia of PVC conduit medium duty concealed (column/beam/ roof) conduit heavy duty accessories and fittings with chasing/cutting complete with 1 run of copper conductor multistranded of size 2.50 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed. Note: (i) Note:- two runs of 2.50 sqmm cable and one run of 2.50 sqmm cable as earth wire and one run of PVC conduit will be measured as one unit.

S&F in replacement of plug and socket metal enclosure box of module (2P+E- SP), IK 08, supplied with Neutral Links complete with one MCB SP 20 amp,240 Volts recess mounted with chained metal cover for the socket outlet complete all as specified and directed by Engr-In-Charge.

Taking down carefully existing storage type water heater (Geysers) from any height of any capacity/description by isolating electric/water supply and set aside insafe custody for reuse and refixing in same postion including servicing and cleaning of all serviceable items with provn of fixing arrangements alongwith heavy duty PVC connection of suitable size wherever required after completion of work all as specified and directed.

Taking down carefully existing exhaust fans from any height of any capacity/description by isolating electric supply and set aside in safe custody for reuse and refixing in same postion including overhauling/servicing, cleaning, greasing, reassembling,replacing the required part after completion of work all as specified and directed.

Note : Tenderers may note that amount of credit Rs 02,90,100.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

Amit Engineering (BID ID -3345329)

PAWAN KUMAR (BID ID -3348113)

MOHAN LAL GUPTA (BID ID -3343756)

RAMAPATI ENGINEERING SERVICES (BID ID -3343816)

M/S SURAT SINGH AND SONS (BID ID -3348473)

Ms dev associates (BID ID -3342633)